OVMS3-idf/components/esp32s2beta/Kconfig

menu "ESP32S2-specific"
    # TODO: this component simply shouldn't be included
    # in the build at the CMake level, but this is currently
    # not working so we just hide all items here
    visible if IDF_TARGET_ESP32S2BETA

    choice ESP32S2_DEFAULT_CPU_FREQ_MHZ
        prompt "CPU frequency"
        default ESP32S2_DEFAULT_CPU_FREQ_160
        help
            CPU frequency to be set on application startup.

        config ESP32S2_DEFAULT_CPU_FREQ_80
            bool "80 MHz"
        config ESP32S2_DEFAULT_CPU_FREQ_160
            bool "160 MHz"
        config ESP32S2_DEFAULT_CPU_FREQ_240
            bool "240 MHz"
    endchoice

    config ESP32S2_DEFAULT_CPU_FREQ_MHZ
        int
        default 80 if ESP32S2_DEFAULT_CPU_FREQ_80
        default 160 if ESP32S2_DEFAULT_CPU_FREQ_160
        default 240 if ESP32S2_DEFAULT_CPU_FREQ_240

    menu "Cache config"

        choice ESP32S2_INSTRUCTION_CACHE_SIZE
            prompt "Instruction cache size"
            default ESP32S2_INSTRUCTION_CACHE_8KB
            help
                Instruction cache size to be set on application startup.
                If you use 8KB instruction cache rather than 16KB instruction cache,
                then the other 8KB will be added to the heap.

            config ESP32S2_INSTRUCTION_CACHE_8KB
                bool "8KB"
            config ESP32S2_INSTRUCTION_CACHE_16KB
                bool "16KB"
        endchoice

        choice ESP32S2_INSTRUCTION_CACHE_WAYS
            prompt "Instruction cache associated ways"
            default ESP32S2_INSTRUCTION_CACHE_8WAYS
            help
                Instruction cache associated ways to be set on application startup.

            config ESP32S2_INSTRUCTION_CACHE_4WAYS
                bool "4 ways"
            config ESP32S2_INSTRUCTION_CACHE_8WAYS
                bool "8 ways"
        endchoice

        choice ESP32S2_INSTRUCTION_CACHE_LINE_SIZE
            prompt "Instruction cache line size"
            default ESP32S2_INSTRUCTION_CACHE_LINE_32B
            help
                Instruction cache line size to be set on application startup.

            config ESP32S2_INSTRUCTION_CACHE_LINE_16B
                bool "16 Bytes"
            config ESP32S2_INSTRUCTION_CACHE_LINE_32B
                bool "32 Bytes"
            config ESP32S2_INSTRUCTION_CACHE_LINE_64B
                bool "64 Bytes"
        endchoice

        choice ESP32S2_DATA_CACHE_SIZE
            prompt "Data cache size"
            default ESP32S2_DATA_CACHE_8KB
            help
                Data cache size to be set on application startup.
                If you use 8KB data cache rather than 16KB data cache, the other 8KB will be added to the heap.

            config ESP32S2_DATA_CACHE_0KB
                depends on !ESP32S2_SPIRAM_SUPPORT
                bool "0KB"
            config ESP32S2_DATA_CACHE_8KB
                bool "8KB"
            config ESP32S2_DATA_CACHE_16KB
                bool "16KB"
        endchoice

        choice ESP32S2_DATA_CACHE_ASSOCIATED_WAYS
            prompt "Data cache associated ways"
            default ESP32S2_DATA_CACHE_8WAYS
            help
                Data cache associated ways to be set on application startup.

            config ESP32S2_DATA_CACHE_4WAYS
                bool "4 ways"
            config ESP32S2_DATA_CACHE_8WAYS
                bool "8 ways"
        endchoice

        choice ESP32S2_DATA_CACHE_LINE_SIZE
            prompt "Data cache line size"
            default ESP32S2_DATA_CACHE_LINE_32B
            help
                Data cache line size to be set on application startup.

            config ESP32S2_DATA_CACHE_LINE_16B
                bool "16 Bytes"
            config ESP32S2_DATA_CACHE_LINE_32B
                bool "32 Bytes"
            config ESP32S2_DATA_CACHE_LINE_64B
                bool "64 Bytes"
        endchoice

        config ESP32S2_RODATA_USE_DATA_CACHE
            depends on ESP32S2_DATA_CACHE_8KB || ESP32S2_DATA_CACHE_16KB
            bool "Use data cache rather than instruction cache to access read only data"
            default "n"
            help
                If enabled, CPU will access rodata through data cache, which will reduce the overload
                of instruction cache, however will increase the overload of data cache.

        config ESP32S2_INSTRUCTION_CACHE_WRAP
            bool "Enable instruction cache wrap"
            default "n"
            help
                If enabled, instruction cache will use wrap mode to read spi flash (maybe spiram).
                The wrap length equals to INSTRUCTION_CACHE_LINE_SIZE.
                However, it depends on complex conditions.

        config ESP32S2_DATA_CACHE_WRAP
            bool "Enable data cache wrap"
            default "n"
            help
                If enabled, data cache will use wrap mode to read spiram (maybe spi flash).
                The wrap length equals to DATA_CACHE_LINE_SIZE.
                However, it depends on complex conditions.

    endmenu  # Cache config

    # Note: to support SPIRAM across multiple chips, check CONFIG_SPIRAM
    # instead
    config ESP32S2_SPIRAM_SUPPORT
        bool "Support for external, SPI-connected RAM"
        default "n"
        select SPIRAM
        help
            This enables support for an external SPI RAM chip, connected in parallel with the
            main SPI flash chip.

    menu "SPI RAM config"
        depends on ESP32S2_SPIRAM_SUPPORT

        choice SPIRAM_TYPE
            prompt "Type of SPI RAM chip in use"
            default SPIRAM_TYPE_ESPPSRAM32

            config SPIRAM_TYPE_ESPPSRAM32
                bool "ESP-PSRAM32 or IS25WP032"

            config SPIRAM_TYPE_ESPPSRAM64
                bool "ESP-PSRAM64 or LY68L6400"
        endchoice

        config SPIRAM_SIZE
            int
            default 4194304 if SPIRAM_TYPE_ESPPSRAM32
            default 8388608 if SPIRAM_TYPE_ESPPSRAM64
            default 0

        config SPIRAM_FETCH_INSTRUCTIONS
            bool "Cache fetch instructions from SPI RAM"
            default n
            help
                If enabled, instruction in flash will be copied into SPIRAM.
                If SPIRAM_RODATA also enabled,
                you can run the instruction when erasing or programming the flash.

        config SPIRAM_RODATA
            bool "Cache load read only data from SPI RAM"
            default n
            help
                If enabled, radata in flash will be copied into SPIRAM.
                If SPIRAM_FETCH_INSTRUCTIONS also enabled,
                you can run the instruction when erasing or programming the flash.

        config SPIRAM_USE_AHB_DBUS3
            bool "Enable AHB DBUS3 to access SPIRAM"
            default n
            help
                If Enabled, if SPI_CONFIG_SIZE is bigger then 10MB+576KB,
                then you can have 4MB more space to map the SPIRAM.
                However, the AHB bus is slower than other data cache buses.

        choice SPIRAM_SPEED
            prompt "Set RAM clock speed"
            default SPIRAM_CACHE_SPEED_40M
            help
                Select the speed for the SPI RAM chip.
                If SPI RAM is enabled, we only support three combinations of SPI speed mode we supported now:

                1. Flash SPI running at 40Mhz and RAM SPI running at 40Mhz
                2. Flash SPI running at 80Mhz and RAM SPI running at 40Mhz
                3. Flash SPI running at 80Mhz and RAM SPI running at 80Mhz

                Note: If the third mode(80Mhz+80Mhz) is enabled for SPI RAM of type 32MBit, one of the HSPI/VSPI host
                will be occupied by the system. Which SPI host to use can be selected by the config item
                SPIRAM_OCCUPY_SPI_HOST. Application code should never touch HSPI/VSPI hardware in this case. The
                option to select 80MHz will only be visible if the flash SPI speed is also 80MHz.
                (ESPTOOLPY_FLASHFREQ_80M is true)

            config SPIRAM_SPEED_80M
                bool "80MHz clock speed"
            config SPIRAM_SPEED_40M
                bool "40Mhz clock speed"
            config SPIRAM_SPEED_26M
                bool "26Mhz clock speed"
            config SPIRAM_SPEED_20M
                bool "20Mhz clock speed"
        endchoice

        # insert non-chip-specific items here
        source "$IDF_PATH/components/esp_common/Kconfig.spiram.common"

    endmenu

    config ESP32S2_MEMMAP_TRACEMEM
        bool
        default "n"

    config ESP32S2_TRAX
        bool "Use TRAX tracing feature"
        default "n"
        select ESP32S2_MEMMAP_TRACEMEM
        help
            The ESP32S2 contains a feature which allows you to trace the execution path the processor
            has taken through the program. This is stored in a chunk of 32K (16K for single-processor)
            of memory that can't be used for general purposes anymore. Disable this if you do not know
            what this is.

    config ESP32S2_TRACEMEM_RESERVE_DRAM
        hex
        default 0x4000 if ESP32S2_MEMMAP_TRACEMEM
        default 0x0


    choice ESP32S2_UNIVERSAL_MAC_ADDRESSES
        bool "Number of universally administered (by IEEE) MAC address"
        default ESP32S2_UNIVERSAL_MAC_ADDRESSES_FOUR
        help
            Configure the number of universally administered (by IEEE) MAC addresses.
            During initialisation, MAC addresses for each network interface are generated or derived from a
            single base MAC address.
            If the number of universal MAC addresses is four, all four interfaces (WiFi station, WiFi softap,
            Bluetooth and Ethernet) receive a universally administered MAC address. These are generated
            sequentially by adding 0, 1, 2 and 3 (respectively) to the final octet of the base MAC address.
            If the number of universal MAC addresses is two, only two interfaces (WiFi station and Bluetooth)
            receive a universally administered MAC address. These are generated sequentially by adding 0
            and 1 (respectively) to the base MAC address. The remaining two interfaces (WiFi softap and Ethernet)
            receive local MAC addresses. These are derived from the universal WiFi station and Bluetooth MAC
            addresses, respectively.
            When using the default (Espressif-assigned) base MAC address, either setting can be used. When using
            a custom universal MAC address range, the correct setting will depend on the allocation of MAC
            addresses in this range (either 2 or 4 per device.)

        config ESP32S2_UNIVERSAL_MAC_ADDRESSES_TWO
            bool "Two"
        config ESP32S2_UNIVERSAL_MAC_ADDRESSES_FOUR
            bool "Four"
    endchoice

    config ESP32S2_UNIVERSAL_MAC_ADDRESSES
        int
        default 2 if ESP32S2_UNIVERSAL_MAC_ADDRESSES_TWO
        default 4 if ESP32S2_UNIVERSAL_MAC_ADDRESSES_FOUR

    config ESP32S2_ULP_COPROC_ENABLED
        bool "Enable Ultra Low Power (ULP) Coprocessor"
        default "n"
        help
            Set to 'y' if you plan to load a firmware for the coprocessor.

            If this option is enabled, further coprocessor configuration will appear in the Components menu.

    config ESP32S2_ULP_COPROC_RESERVE_MEM
        int
        prompt "RTC slow memory reserved for coprocessor" if ESP32S2_ULP_COPROC_ENABLED
        default 512 if ESP32S2_ULP_COPROC_ENABLED
        range 32 8192 if ESP32S2_ULP_COPROC_ENABLED
        default 0 if !ESP32S2_ULP_COPROC_ENABLED
        range 0 0 if !ESP32S2_ULP_COPROC_ENABLED
        help
            Bytes of memory to reserve for ULP coprocessor firmware & data.

            Data is reserved at the beginning of RTC slow memory.

    choice ESP32S2_PANIC
        prompt "Panic handler behaviour"
        default ESP32S2_PANIC_PRINT_REBOOT
        help
            If FreeRTOS detects unexpected behaviour or an unhandled exception, the panic handler is
            invoked. Configure the panic handlers action here.

        config ESP32S2_PANIC_PRINT_HALT
            bool "Print registers and halt"
            help
                Outputs the relevant registers over the serial port and halt the
                processor. Needs a manual reset to restart.

        config ESP32S2_PANIC_PRINT_REBOOT
            bool "Print registers and reboot"
            help
                Outputs the relevant registers over the serial port and immediately
                reset the processor.

        config ESP32S2_PANIC_SILENT_REBOOT
            bool "Silent reboot"
            help
                Just resets the processor without outputting anything

        config ESP32S2_PANIC_GDBSTUB
            bool "Invoke GDBStub"
            select ESP_GDBSTUB_ENABLED
            help
                Invoke gdbstub on the serial port, allowing for gdb to attach to it to do a postmortem
                of the crash.
    endchoice

    config ESP32S2_DEBUG_OCDAWARE
        bool "Make exception and panic handlers JTAG/OCD aware"
        default y
        help
            The FreeRTOS panic and unhandled exception handers can detect a JTAG OCD debugger and
            instead of panicking, have the debugger stop on the offending instruction.

    config ESP32S2_DEBUG_STUBS_ENABLE
        bool "OpenOCD debug stubs"
        default COMPILER_OPTIMIZATION_LEVEL_DEBUG
        depends on !ESP32S2_TRAX
        help
            Debug stubs are used by OpenOCD to execute pre-compiled onboard code which does some useful debugging,
            e.g. GCOV data dump.

    config ESP32S2_BROWNOUT_DET
        bool "Hardware brownout detect & reset"
        default y
        help
            The ESP32S2 has a built-in brownout detector which can detect if the voltage is lower than
            a specific value. If this happens, it will reset the chip in order to prevent unintended
            behaviour.

    choice ESP32S2_BROWNOUT_DET_LVL_SEL
        prompt "Brownout voltage level"
        depends on ESP32S2_BROWNOUT_DET
        default ESP32S2_BROWNOUT_DET_LVL_SEL_25
        help
            The brownout detector will reset the chip when the supply voltage is approximately
            below this level. Note that there may be some variation of brownout voltage level
            between each ESP32 chip.

            #The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
            #of the brownout threshold levels.
        config ESP32S2_BROWNOUT_DET_LVL_SEL_0
            bool "2.43V +/- 0.05"
        config ESP32S2_BROWNOUT_DET_LVL_SEL_1
            bool "2.48V +/- 0.05"
        config ESP32S2_BROWNOUT_DET_LVL_SEL_2
            bool "2.58V +/- 0.05"
        config ESP32S2_BROWNOUT_DET_LVL_SEL_3
            bool "2.62V +/- 0.05"
        config ESP32S2_BROWNOUT_DET_LVL_SEL_4
            bool "2.67V +/- 0.05"
        config ESP32S2_BROWNOUT_DET_LVL_SEL_5
            bool "2.70V +/- 0.05"
        config ESP32S2_BROWNOUT_DET_LVL_SEL_6
            bool "2.77V +/- 0.05"
        config ESP32S2_BROWNOUT_DET_LVL_SEL_7
            bool "2.80V +/- 0.05"
    endchoice

    config ESP32S2_BROWNOUT_DET_LVL
        int
        default 0 if ESP32S2_BROWNOUT_DET_LVL_SEL_0
        default 1 if ESP32S2_BROWNOUT_DET_LVL_SEL_1
        default 2 if ESP32S2_BROWNOUT_DET_LVL_SEL_2
        default 3 if ESP32S2_BROWNOUT_DET_LVL_SEL_3
        default 4 if ESP32S2_BROWNOUT_DET_LVL_SEL_4
        default 5 if ESP32S2_BROWNOUT_DET_LVL_SEL_5
        default 6 if ESP32S2_BROWNOUT_DET_LVL_SEL_6
        default 7 if ESP32S2_BROWNOUT_DET_LVL_SEL_7


        # Note about the use of "FRC1" name: currently FRC1 timer is not used for
        # high resolution timekeeping anymore. Instead the esp_timer API, implemented
        # using FRC2 timer, is used.
        # FRC1 name in the option name is kept for compatibility.
    choice ESP32S2_TIME_SYSCALL
        prompt "Timers used for gettimeofday function"
        default ESP32S2_TIME_SYSCALL_USE_RTC_FRC1
        help
            This setting defines which hardware timers are used to
            implement 'gettimeofday' and 'time' functions in C library.

            - If both high-resolution and RTC timers are used, timekeeping will
              continue in deep sleep. Time will be reported at 1 microsecond
              resolution. This is the default, and the recommended option.
            - If only high-resolution timer is used, gettimeofday will
              provide time at microsecond resolution.
              Time will not be preserved when going into deep sleep mode.
            - If only RTC timer is used, timekeeping will continue in
              deep sleep, but time will be measured at 6.(6) microsecond
              resolution. Also the gettimeofday function itself may take
              longer to run.
            - If no timers are used, gettimeofday and time functions
              return -1 and set errno to ENOSYS.
            - When RTC is used for timekeeping, two RTC_STORE registers are
              used to keep time in deep sleep mode.

        config ESP32S2_TIME_SYSCALL_USE_RTC_FRC1
            bool "RTC and high-resolution timer"
        config ESP32S2_TIME_SYSCALL_USE_RTC
            bool "RTC"
        config ESP32S2_TIME_SYSCALL_USE_FRC1
            bool "High-resolution timer"
        config ESP32S2_TIME_SYSCALL_USE_NONE
            bool "None"
    endchoice

    choice ESP32S2_RTC_CLK_SRC
        prompt "RTC clock source"
        default ESP32S2_RTC_CLK_SRC_INT_RC
        help
            Choose which clock is used as RTC clock source.

        config ESP32S2_RTC_CLK_SRC_INT_RC
            bool "Internal 150kHz RC oscillator"
        config ESP32S2_RTC_CLK_SRC_EXT_CRYS
            bool "External 32kHz crystal"
    endchoice

    config ESP32S2_RTC_CLK_CAL_CYCLES
        int "Number of cycles for RTC_SLOW_CLK calibration"
        default 3000 if ESP32S2_RTC_CLK_SRC_EXT_CRYS
        default 1024 if ESP32S2_RTC_CLK_SRC_INT_RC
        range 0 125000
        help
            When the startup code initializes RTC_SLOW_CLK, it can perform
            calibration by comparing the RTC_SLOW_CLK frequency with main XTAL
            frequency. This option sets the number of RTC_SLOW_CLK cycles measured
            by the calibration routine. Higher numbers increase calibration
            precision, which may be important for applications which spend a lot of
            time in deep sleep. Lower numbers reduce startup time.

            When this option is set to 0, clock calibration will not be performed at
            startup, and approximate clock frequencies will be assumed:

            - 150000 Hz if internal RC oscillator is used as clock source. For this use value 1024.
            - 32768 Hz if the 32k crystal oscillator is used. For this use value 3000 or more.
              In case more value will help improve the definition of the launch of the crystal.
              If the crystal could not start, it will be switched to internal RC.

    choice ESP32S2_XTAL_FREQ_SEL
        prompt "Main XTAL frequency"
        default ESP32S2_XTAL_FREQ_40
        help
            ESP32 currently supports the following XTAL frequencies:

            - 26 MHz
            - 40 MHz

            Startup code can automatically estimate XTAL frequency. This feature
            uses the internal 8MHz oscillator as a reference. Because the internal
            oscillator frequency is temperature dependent, it is not recommended
            to use automatic XTAL frequency detection in applications which need
            to work at high ambient temperatures and use high-temperature
            qualified chips and modules.
        config ESP32S2_XTAL_FREQ_40
            bool "40 MHz"
        config ESP32S2_XTAL_FREQ_26
            bool "26 MHz"
        config ESP32S2_XTAL_FREQ_AUTO
            bool "Autodetect"
    endchoice

    # Keep these values in sync with rtc_xtal_freq_t enum in soc/rtc.h
    config ESP32S2_XTAL_FREQ
        int
        default 0 if ESP32S2_XTAL_FREQ_AUTO
        default 40 if ESP32S2_XTAL_FREQ_40
        default 26 if ESP32S2_XTAL_FREQ_26

    config ESP32S2_DISABLE_BASIC_ROM_CONSOLE
        bool "Permanently disable BASIC ROM Console"
        default n
        help
            If set, the first time the app boots it will disable the BASIC ROM Console
            permanently (by burning an eFuse).

            Otherwise, the BASIC ROM Console starts on reset if no valid bootloader is
            read from the flash.

            (Enabling secure boot also disables the BASIC ROM Console by default.)

    config ESP32S2_NO_BLOBS
        bool "No Binary Blobs"
        depends on !BT_ENABLED
        default n
        help
            If enabled, this disables the linking of binary libraries in the application build. Note
            that after enabling this Wi-Fi/Bluetooth will not work.

endmenu  # ESP32S2-Specific

menu "Power Management"
    # TODO: this component simply shouldn't be included
    # in the build at the CMake level, but this is currently
    # not working so we just hide all items here
    visible if IDF_TARGET_ESP32S2BETA

    config PM_ENABLE
        bool "Support for power management"
        default n
        help
            If enabled, application is compiled with support for power management.
            This option has run-time overhead (increased interrupt latency,
            longer time to enter idle state), and it also reduces accuracy of
            RTOS ticks and timers used for timekeeping.
            Enable this option if application uses power management APIs.

    config PM_DFS_INIT_AUTO
        bool "Enable dynamic frequency scaling (DFS) at startup"
        depends on PM_ENABLE
        default n
        help
            If enabled, startup code configures dynamic frequency scaling.
            Max CPU frequency is set to CONFIG_ESP32S2_DEFAULT_CPU_FREQ_MHZ setting,
            min frequency is set to XTAL frequency.
            If disabled, DFS will not be active until the application
            configures it using esp_pm_configure function.

    config PM_USE_RTC_TIMER_REF
        bool "Use RTC timer to prevent time drift (EXPERIMENTAL)"
        depends on PM_ENABLE && (ESP32S2_TIME_SYSCALL_USE_RTC || ESP32S2_TIME_SYSCALL_USE_RTC_FRC1)
        default n
        help
            When APB clock frequency changes, high-resolution timer (esp_timer)
            scale and base value need to be adjusted. Each adjustment may cause
            small error, and over time such small errors may cause time drift.
            If this option is enabled, RTC timer will be used as a reference to
            compensate for the drift.
            It is recommended that this option is only used if 32k XTAL is selected
            as RTC clock source.

    config PM_PROFILING
        bool "Enable profiling counters for PM locks"
        depends on PM_ENABLE
        default n
        help
            If enabled, esp_pm_* functions will keep track of the amount of time
            each of the power management locks has been held, and esp_pm_dump_locks
            function will print this information.
            This feature can be used to analyze which locks are preventing the chip
            from going into a lower power state, and see what time the chip spends
            in each power saving mode. This feature does incur some run-time
            overhead, so should typically be disabled in production builds.

    config PM_TRACE
        bool "Enable debug tracing of PM using GPIOs"
        depends on PM_ENABLE
        default n
        help
            If enabled, some GPIOs will be used to signal events such as RTOS ticks,
            frequency switching, entry/exit from idle state. Refer to pm_trace.c
            file for the list of GPIOs.
            This feature is intended to be used when analyzing/debugging behavior
            of power management implementation, and should be kept disabled in
            applications.


endmenu # "Power Management"