MMDVMHost-Private/DMRplus_startup_options.md
2016-11-11 22:05:26 +01:00

32 lines
1.6 KiB
Markdown

# DMRplus - Startup Options
## Introduction
This file is to give an overview over the Options-parameter in MMDVM.ini [DMR Network]-section.
## Example
You can pull some conection-info at startup to the DMRplus-Network to define the behavior of TS1 and TS2 in DMR-mode.
An example of such a line would be following:
Options=StartRef=4013;RelinkTime=15;UserLink=1;TS1_1=262;TS1_2=1;TS1_3=20;TS1_4=110;TS1_5=270;
If an option is set, it overwrites the setting preset at the master, if an option is empty, it unsets a predefined setting from
the master. If an option is not set, the default from the master would be taken over.
## What the parameters are about?
Here is a quick explaination about the options to be set:
* StartRef: This is the default reflector in TS2, in example: Refl. 4013
* RelinkTime: This is the time to fall back to the default-reflector if linked to another one and no local traffic is done,
not yet implemented, would come next
* UserLink: This defines, if users are allowed to link to another reflector (other than defined as startreflector)
* 1 = allow
* 0 = disallow
* TS1_1: This is the first of 5 talkgroups that could be set static, in example: TG262
* TS1_2: This is the second of 5 talkgroups that could be set static, in example: TG1
* TS1_3: This is the third of 5 talkgroups that could be set static, in example: TG20
* TS1_4: This is the fourth of 5 talkgroups that could be set static, in example: TG110
* TS1_5: This is the fifth of 5 talkgroups that could be set static, in example: TG270
---
Info created by DG9VH 2016-11-11