Ray Jones
2ccd948001
Web update via OTA now under user control. Icon shows on header when an update is available.
...
Update can be commanded via the Version Information menu by pressing UP, CENTRE, UP. Prompt driven of course!
Removed Wifi Trigger pin - does not play nice with automatic COM port uploads!
Reverted to DS18B20 read from index 0 - allows plugging sensor in and re-discovery!
2019-05-20 22:09:59 +10:00
Ray Jones
fc8eef73a6
Using websocket to get proper firmware upload byte count
2019-05-18 18:49:22 +10:00
Ray Jones
da33a02844
Added SW watchdog
2019-05-17 16:08:35 +10:00
Ray Jones
a6540eb997
Added factory default via version menu.
...
WiFi credentials for SoftAP and web update now stored in NV storage.
NV Storage structures now handle load and save for their members
2019-05-16 21:12:29 +10:00
Ray Jones
04fab40742
Refactored string in JSON moderator - const char* are BAD AND EVIL in a std::map
...
MQTT parameter exchange via JSON and NV storage
2019-05-12 20:15:18 +10:00
Ray Jones
9861297744
Suite of minor bug fixes and annoyances - now Afterburner for AP and BT server names :-)
...
OTA was not rebooting after AP only update
2019-05-11 12:18:06 +10:00
rljonesau
a8744fdf22
Wifi enable & OTA enable in NVram. Bug fix thermostat mode in priming menu.
...
OTA now shows in screen header against Wifi icon.
2019-03-24 16:48:03 +11:00
rljonesau
f4d6c3dccc
Added descriptions of key pad functions in setup menus. Made key pad presses more consistent.
2019-03-17 18:10:01 +11:00
rljonesau
bf082210b8
timers a work in progress - updating JSON commands
2019-02-26 19:38:30 +11:00
rljonesau
67bc2b8261
FUBAR'd the default system voltage in NV storage - was 12, should be 120!
...
adding last two bytes of MAC to default AP's SSID - useful if you have a couple of ESP's on the desk!
2019-01-26 11:58:50 +11:00
rljonesau
4d12334823
Improved Config Portal feedback on OLED
2019-01-18 14:34:32 +11:00
rljonesau
716827b399
All WifiManager reconfigs now conclude via wifiEnterConfigPortal which manages NV flag and OLED reboot alert
2019-01-16 20:22:17 +11:00
rljonesau
af0980a72b
Can now set/clear CFG mode with OLED. Can also clear credentials.
2019-01-15 08:41:54 +11:00
rljonesau
abbd0fa5ae
tidied commenting in BTCWifi.cpp
2019-01-15 07:03:35 +11:00
rljonesau
1b74359084
Refactored to use BOOT (GPIO0) switch for WiFi - so obvious! Shows CFG on WiFi icon if STA+AP and portal running
2019-01-14 21:35:21 +11:00
rljonesau
95c054e19b
Rehashed post wm.autoConnect. Can now have config portal active on STA connection!
2019-01-14 20:54:31 +11:00
rljonesau
c2e790a5dd
STA+AP mode working - woo hoo!
2019-01-14 17:55:54 +11:00
rljonesau
13c3b1b44a
changed to single variable for AP mode tracking
2019-01-14 16:48:33 +11:00
rljonesau
551205d6bd
Tidy up DS18B20 reporting. Tidied WiFiManager handling, new Bluetooth app
2019-01-14 14:30:41 +11:00
rljonesau
320b7e8b6f
Added CFG to OLED WiFi icon when portal running. 5 sec press to reset WiFi creds, start portal
2019-01-14 11:47:13 +11:00
rljonesau
de2cd12770
Once again works with 192.168.100.1 as the SoftAP IP address
2019-01-14 09:00:43 +11:00
rljonesau
c0e42e6dc6
Pin 25 now determines if we boot into Config Portal or Web Page
...
Short press -> Config Portal
Long press -> Web Page (> 1 second)
2019-01-14 08:24:13 +11:00
rljonesau
0765882256
Can launch SoftAP with web server from boot with no WiFiManager credentials.
...
Now to set some NV flags to control the boot to either web server or WifiManager with no creds.
2019-01-14 07:16:45 +11:00
rljonesau
4d780ed3a1
Have portal working from boot, reboot after setting up WiFiManager to connect to new network
2019-01-14 06:59:32 +11:00
rljonesau
bbb225e3b7
Can finally get WifiManager configportal up using the pushbutton, but only if no credentials
2019-01-13 08:32:13 +11:00
rljonesau
713724eaab
restored comment on line in BTCWifi.cpp
2019-01-12 12:21:29 +11:00
rljonesau
74daefe644
Added validatedLoad for checking and correcting values read by Preferences at time of read.
2019-01-12 12:19:55 +11:00
rljonesau
e8a110a308
Fixed wm access from BTCWebServer.cpp for James
2019-01-11 19:50:27 +11:00
James
8005636f30
Added /reset and /wmconfig pages to reset wifi settings and start config portal on request
2019-01-11 19:28:22 +11:00
rljonesau
b40f9d3538
Improved DS18B20 handling (not connected), Fan Sensor & Operating voltage added to JSON.
...
Wireless AP no go on new green board....
2019-01-11 16:40:25 +11:00
rljonesau
74107d93d0
Added support for (horrid) 0.96" OLED via BTCConfig.h - BEST USE 1.3" SH1106 DISPLAYS
...
HC-05 bug fix for bare modules - not happy with empty AT lines being sent ERROR:(0) returns!
Had UART pins for HC-05 reversed on green board.
2019-01-10 16:01:52 +11:00
rljonesau
529ac5d8e0
Pushed and shoved and edited and finally there - structured file directories
2018-12-16 18:34:39 +11:00