Crash_Override/ESP32_ChinaDieselHeater_Control
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
527 commits 2 branches 34 tags 137 MiB
Commit graph

64 commits

Author SHA1 Message Date
Ray Jones ef04489fa6 Allowed web update of beta version to release of same base version 2020-06-19 16:49:40 +10:00
Ray Jones f18cfbf2e5 Manual selective Merge from bleeding edge, pulling in 433MHz, new HC05 and NV storage semaphore fix. 2020-06-19 11:24:44 +10:00
Ray Jones 775f235ba8 Added Stop/Start thermostat mode 
FuelUsage & FuelRate added as basic MQTT status topics
 2020-05-13 10:37:31 +10:00
Ray Jones 24d8a4a7f1 Added timer retry according to temperature being denied in the past 2020-05-09 19:17:21 +10:00
Ray Jones baf8678e99 Added some FreeRTOS tasks to avoid blocking issues - still very unreliable 2020-04-22 16:21:24 +10:00
Ray Jones b58ed90432 Found websocket write was blocking, returning 0, leading to WD reboot. Need to think of proper fix 2020-04-20 13:39:39 +10:00
Ray Jones 67998747d7 Added DemandManager, removing TimerManager from direct temperature demand control aspects 
Likewise moved demand adjustments into DemandManager.
 2020-04-11 18:49:52 +10:00
Ray Jones 9839571893 Added support for injecting Fixed Hz demands if a timer start has a defined temperature. 
Uses normal range for fixed Hz.
 2020-04-11 07:51:25 +10:00
Ray Jones 4eddcd0f1e STA only mode 
Fixed MQTT topic prefix
 2020-04-08 07:51:52 +10:00
Ray Jones 9c100f1954 Added Fuel Reset GPIO input option 2020-03-31 19:46:25 +11:00
Ray Jones 8ec438e02a Added excess fuel usage shutdown feature 2020-03-30 16:17:54 +11:00
Ray Jones 8b8aaf0024 Timer Temperature support added 
Desired temperature requests are now managed via TimerManager to allow timer override of desired temperature.
Bug fix: crash checking for new firmware if no STA connection
Suppression of GPIO JSON if no or limited GPIO capability is installed.
 2020-03-29 13:59:13 +11:00
Ray Jones 87b1704335 Added OLED and JSON Web Content Update functionality 2020-03-25 20:28:12 +11:00
Ray Jones 4986a4d741 Assortment of tweaks and fixes 
New Features:
GPIO "Run" status output (not standby)
RSSI of STA connection
STA gatewayIP
Only run as "active" controller when changes to fuel mixture etc for a short while.
Timed moderation added for frequently changing JSON vars
Altitude & Humidity via JSON
JSON reboot (mainly for MQTT clients)

Bug Fixes:
Cyclic not enabled when frost start
LVC holdoff added for "starting car" situation
Better handling of string and float NV Storage defaults
FrostRise limits  1-30 now 0-30
Handle spaces in SPIFFS file uploads
 2020-03-23 16:54:15 +11:00
Ray Jones 06d78860ca Bug fix: Factory default would not save 2020-01-15 07:55:57 +11:00
Ray Jones 7e1a4940ac Added BME280 humidity and altitude information 
Can start heater if high humidity
Altitude reported to heater per BMP180 in OEM controllers.
lowered min Hz limit to 500
 2020-01-13 19:48:32 +11:00
Ray Jones 083fb63764 BUG FIX: always showing offset against DS18B20 in temp sensor role screen 2020-01-09 12:50:54 +11:00
Ray Jones 194cc08ac9 Case Sensitive issue "ABmqtt"/"ABMqtt" -> "ABMQTT.h" 2020-01-05 08:46:46 +11:00
Ray Jones f5d72e2ac8 Using asyncHTTPrequest for version update check, synchronous method for actual update. 
Released and tagged as V3.1.7.4 BETA
 2020-01-04 18:13:40 +11:00
Ray Jones 69155f8e45 Stabilise using AsyncTCP to scrape FOTA JSON file. 
Need to establish WTF "closed_slots" in AsyncTCP are all about, especially the bad indexes that fly about leading to LWIP crashes.
 2019-12-15 17:58:11 +11:00
Ray Jones 6fb7b9d608 Added UIEditScreen class to standardise the save&confirm behaviour. 
Bug fix in body temperature sensor < 0
 2019-11-21 19:25:14 +11:00
Ray Jones eb2e2d4305 bug fix of rowsel in ds18b20 screen 2019-11-11 18:59:49 +11:00
Ray Jones d8e71eebc1 Added Frost Mode setup screen, sub-classed NVstore confirm behaviour 2019-11-10 15:44:54 +11:00
Ray Jones 7081391f63 Added core frost functionality 2019-11-01 09:24:58 +11:00
Ray Jones f2af9c3fda Added under/over temperature threshold for GPIO outputs 2019-10-30 21:48:25 +11:00
Ray Jones f330d812e6 Added JTAG use defines for ESP PROG debug 2019-10-27 11:02:49 +11:00
Ray Jones 2e25ad3da4 Fixed role ordering in NV for DS18B20 probe offsets 
Replaced ` with clean degree symbol in standard font & arial 8
Removed temp offset from fuel cal screen
GUI alignment tweaks to avoid cutoffs
Better handling of single DS18B20 with BME280
Added bounds limits to Exponential Mean
Sorted inheritance from CSensor properly
 2019-10-19 09:58:19 +11:00
Ray Jones aabe6a54b3 Stabilised BME280 with DS18B20 coexistence 2019-10-18 12:55:16 +11:00
Ray Jones ab246244c9 Merge branch 'Branch_V3BoardDetect' 2019-09-25 19:39:02 +10:00
Ray Jones af34331401 Dig Only V3 PCB, Fixed Hz setting reporting bug fix 2019-09-25 19:38:19 +10:00
Ray Jones 112628f103 Tidy up 2019-09-25 17:27:43 +10:00
Ray Jones 573ebf3e3b Added auto save of single DS18B20 serial number 2019-09-22 14:46:39 +10:00
Ray Jones 8fb1981552 Added Temp Probe selection screen, mapping sensors to user preferences 2019-09-22 09:03:42 +10:00
Ray Jones c51b18dd36 Added password hold option 2019-09-17 20:07:57 +10:00
Ray Jones 3a70970356 Added menu mode selection menu 2019-09-17 08:30:49 +10:00
Ray Jones f93e5d7628 Add basic menu Modes 2019-09-15 12:51:51 +10:00
Ray Jones 3a810d6eea Tidied Repeating timer icon 2019-09-08 11:56:22 +10:00
Ray Jones ac5fdc5dfd V3.1.2 - 
AM/PM selection in clock setup menu.
Extra MQTT JSON IDs added.

Filtered No Heater JSON.
 2019-09-08 10:14:36 +10:00
Ray Jones 583a4881cd Added AM/PM annunciators to clock for 12hr mode 
Added last will to MQTT connection
Condensed no heater timeouts with default screen
 2019-09-07 23:48:46 +10:00
Ray Jones 9fbb6e8dfc Shifted MQTT telnet setup into a separate module. 
Fixed addCRC script for > V3 python
 2019-09-07 18:28:21 +10:00
Ray Jones 77dada9d6b BUG FIX: Fuel gauge reset via web page 
NEW FEATURE: MQTT status screen
 2019-09-04 20:59:01 +10:00
Ray Jones f6f721bd8a Got basic MQTT session working to test.mosquito.org :-) 2019-08-27 23:09:07 +10:00
Ray Jones c79522233c Added Stop function to GPIO input #1 (eg CO sensor with Ext Thermostat 2019-08-27 20:35:21 +10:00
Ray Jones 08a39a26f7 Added countdown to detailed GUI for external thermostat shutdown feature 2019-08-27 06:13:01 +10:00
Ray Jones 7853102a4d Added external thermostat time function to GPIO setup screen 2019-08-26 08:41:44 +10:00
Ray Jones e7bac339b5 Implemented functionality to start & stop heater according to external thermostat input 2019-08-26 06:37:41 +10:00
Ray Jones d7e083b837 Board detect bug fix. New icons for GPIO setup/status 2019-08-10 15:57:46 +10:00
Ray Jones 4873fa8c71 Split GPIO so each pin's function is defined individually. 
Adjusted DS18B20 timing to match Maxim's recommended values.
 2019-08-09 06:13:02 +10:00
Ray Jones 48a0254f13 Can now define the operation mode for each GPIO line individually. 
Need to test actual functionality, GUI OK.
 2019-08-07 22:04:20 +10:00
Ray Jones 10db95733f Added external thermostat via GPIO in 2. Want to change how GPIO pins are defined. 
Modded code to only allow single DS18B20 - getting funny ROM SEARCH lock ups...
Set mini temp sample interval to 750ms, as per data sheet for 12bit DS18B20
 2019-08-07 18:59:30 +10:00