f041cf8cad
Final release V3.2.2
2020-09-16 14:46:54 +10:00
d0a5da308d
IDF PATCH TO SOLVE RMT CRASH WEHN SAVING TO FLASH
2020-06-30 05:46:31 +10:00
a9e0a1e60d
Made release version V3.2.1
2020-06-22 12:15:57 +10:00
ef04489fa6
Allowed web update of beta version to release of same base version
2020-06-19 16:49:40 +10:00
f18cfbf2e5
Manual selective Merge from bleeding edge, pulling in 433MHz, new HC05 and NV storage semaphore fix.
2020-06-19 11:24:44 +10:00
2548191173
V3.2.0 release
2020-05-21 07:42:15 +10:00
21e17d1a2b
Fix for incoming MQTT status 1
...
Use pull up resistor for new HC-05 BT modules rx data
2020-05-21 07:27:06 +10:00
775f235ba8
Added Stop/Start thermostat mode
...
FuelUsage & FuelRate added as basic MQTT status topics
2020-05-13 10:37:31 +10:00
24d8a4a7f1
Added timer retry according to temperature being denied in the past
2020-05-09 19:17:21 +10:00
7b36aa27f5
Tidy up after check pull
2020-05-07 11:51:15 +10:00
4b3951b465
BUG FIX: signed 16 bit issue reporting altitude over JSON
2020-05-07 10:12:20 +10:00
97f3433158
BIG FIXES: External thermostat start denied if internal thermostat too high
...
Pump priming from web page only worked once - was because prime command was never released from heater.
2020-05-06 10:41:26 +10:00
3129a88cb9
Pretty stable with https library BUT #ifdef'd out actual https usage is is very temperamental ATM.
2020-05-03 21:59:56 +10:00
c74f0a76eb
Merge branch 'WebAuth' into SSLtrials
...
Conflicts resolved:
src/Afterburner.cpp
src/WiFi/BTCWebServer.cpp
src/WiFi/BrowserUpload.cpp
src/cfg/BTCConfig.h
2020-04-26 19:52:00 +10:00
b75254220c
Allow entry of no password
2020-04-26 19:28:31 +10:00
9ff2d9410b
Split websocket handling into a task
...
Read all added to BME-280 (MariusZ)
New security menu in debug/telnet
2020-04-26 16:15:08 +10:00
5cdc5c95a5
Moved Blue Wire Comms to a separate task
2020-04-25 09:23:16 +10:00
28bfb28ff6
Adding web authorisation
2020-04-22 16:42:24 +10:00
baf8678e99
Added some FreeRTOS tasks to avoid blocking issues - still very unreliable
2020-04-22 16:21:24 +10:00
b58ed90432
Found websocket write was blocking, returning 0, leading to WD reboot. Need to think of proper fix
2020-04-20 13:39:39 +10:00
67998747d7
Added DemandManager, removing TimerManager from direct temperature demand control aspects
...
Likewise moved demand adjustments into DemandManager.
2020-04-11 18:49:52 +10:00
9839571893
Added support for injecting Fixed Hz demands if a timer start has a defined temperature.
...
Uses normal range for fixed Hz.
2020-04-11 07:51:25 +10:00
4625f98cf3
Core panic in TxManage, concluding gate in timer callback - using digitalwrite is BAD @ ISRL!!!
...
Now use FreeRTOS queue to pass the actual event down.
2020-04-09 06:57:26 +10:00
0ed7ba7e59
Fixed NULL dereference in asyncHTTPrequest - causes core panics if STA but no internet/server unreachable
2020-04-08 20:17:40 +10:00
4eddcd0f1e
STA only mode
...
Fixed MQTT topic prefix
2020-04-08 07:51:52 +10:00
3e3ef7d2f2
AsyncTCP touch
2020-03-31 19:48:03 +11:00
9c100f1954
Added Fuel Reset GPIO input option
2020-03-31 19:46:25 +11:00
8ec438e02a
Added excess fuel usage shutdown feature
2020-03-30 16:17:54 +11:00
8b8aaf0024
Timer Temperature support added
...
Desired temperature requests are now managed via TimerManager to allow timer override of desired temperature.
Bug fix: crash checking for new firmware if no STA connection
Suppression of GPIO JSON if no or limited GPIO capability is installed.
2020-03-29 13:59:13 +11:00
87b1704335
Added OLED and JSON Web Content Update functionality
2020-03-25 20:28:12 +11:00
1d80e34c4b
Added web content download feature.
...
Need to incorporate into OLED menus etc.
2020-03-24 21:14:41 +11:00
4986a4d741
Assortment of tweaks and fixes
...
New Features:
GPIO "Run" status output (not standby)
RSSI of STA connection
STA gatewayIP
Only run as "active" controller when changes to fuel mixture etc for a short while.
Timed moderation added for frequently changing JSON vars
Altitude & Humidity via JSON
JSON reboot (mainly for MQTT clients)
Bug Fixes:
Cyclic not enabled when frost start
LVC holdoff added for "starting car" situation
Better handling of string and float NV Storage defaults
FrostRise limits 1-30 now 0-30
Handle spaces in SPIFFS file uploads
2020-03-23 16:54:15 +11:00
3ca3e633ae
Added getch the to our TelnetSpy overload. This adds the logic to add a LF if only CR is sent by a terminal package
2020-01-15 17:52:43 +11:00
06d78860ca
Bug fix: Factory default would not save
2020-01-15 07:55:57 +11:00
41d43813b7
V3.1.8
2020-01-13 19:58:55 +11:00
7e1a4940ac
Added BME280 humidity and altitude information
...
Can start heater if high humidity
Altitude reported to heater per BMP180 in OEM controllers.
lowered min Hz limit to 500
2020-01-13 19:48:32 +11:00
083fb63764
BUG FIX: always showing offset against DS18B20 in temp sensor role screen
2020-01-09 12:50:54 +11:00
88cf18bfcf
BUG FIX: insufficient wait time after OEM controller data packet, bad calc of start time :-(
2020-01-07 12:30:13 +11:00
af1ab021a4
Renamed to ABMQTT.cpp/.h
2020-01-06 06:11:22 +11:00
194cc08ac9
Case Sensitive issue "ABmqtt"/"ABMqtt" -> "ABMQTT.h"
2020-01-05 08:46:46 +11:00
f5d72e2ac8
Using asyncHTTPrequest for version update check, synchronous method for actual update.
...
Released and tagged as V3.1.7.4 BETA
2020-01-04 18:13:40 +11:00
69155f8e45
Stabilise using AsyncTCP to scrape FOTA JSON file.
...
Need to establish WTF "closed_slots" in AsyncTCP are all about, especially the bad indexes that fly about leading to LWIP crashes.
2019-12-15 17:58:11 +11:00
c76490481d
Bug fixes:
...
Telnet spy would not work in AP only mode
LVC would not allow start when in warning mode, and LVC warning always started at 12/24V
Added "No GPIO" option for new boards with C6 fitted as a 0R
2019-12-06 21:12:56 +11:00
c9298656fa
Tx gate now terminated via a HW timer callback. Using max priority task for SW watchdog.
2019-11-22 21:30:45 +11:00
c649517805
BUG FIX: Introduced an E-07 issue if an OEM controller was plugged in
...
- was due to vTaskDelay at end of loop() - now only delays if OEM is NOT detected.
2019-11-21 20:32:54 +11:00
6fb7b9d608
Added UIEditScreen class to standardise the save&confirm behaviour.
...
Bug fix in body temperature sensor < 0
2019-11-21 19:25:14 +11:00
eb2e2d4305
bug fix of rowsel in ds18b20 screen
2019-11-11 18:59:49 +11:00
d8e71eebc1
Added Frost Mode setup screen, sub-classed NVstore confirm behaviour
2019-11-10 15:44:54 +11:00
53430d3fa0
frost icon
2019-11-01 09:25:58 +11:00
7081391f63
Added core frost functionality
2019-11-01 09:24:58 +11:00
Ray Jones