Mode button with multiple presses ================================= [◀ Go back to main README](../README.md) Description ----------- This script extend the functionality of mode button. Instead of just one you can trigger several actions by pressing the mode button several times. The hardware needs to have a mode button, see `/ system routerboard mode-button`. Starting with RouterOS 6.47beta60 you can configure the reset button to act the same, see `/ system routerboard reset-button`. Copy this code to terminal to check: ``` :if ([ :len [ /system routerboard mode-button print as-value ] ] > 0) do={ :put "Mode button is supported."; } else={ :if ([ :len [ /system routerboard reset-button print as-value ] ] > 0) do={ :put "Mode button is not supported, but reset button is."; } else={ :put "Neither mode button nor reset button is supported."; } } ``` Requirements and installation ----------------------------- Just install the script: $ScriptInstallUpdate mode-button; Then configure the mode button to run `mode-button`: / system routerboard mode-button set enabled=yes on-event="/ system script run mode-button;"; To use the reset button instead: / system routerboard reset-button set enabled=yes on-event="/ system script run mode-button;"; Configuration ------------- The configuration goes to `global-config-overlay`, these are the parameters: * `ModeButton`: an array with defined actions * `ModeButtonLED`: led to give visual feedback Usage and invocation -------------------- Press the mode button. :) --- [◀ Go back to main README](../README.md) [▲ Go back to top](#top)