# *BrakTooth* ESP32 BR/EDR Active Sniffer/Injector This is a reverse engineered **active** BR/EDR sniffer and ESP32 patching framework (soon to be open-sourced), which can be used to explore the Bluetooth (BT) BR/EDR interaction between ESP32 controller and a remote target. Differently than **passive** sniffers, which do not interact with the BT network (piconet), the **active** sniffer connects itself to the remote BT device (BR/EDR target) and allows testing of BT protocol down to the Baseband layer in a quick and simple way by using a third-party BT host stack such as **[blue-kitchen](https://github.com/bluekitchen/btstack)**. The *BrakTooth* sniffer makes use of cheap boards such as ESP32-DOIT or ESP32-WROVER-KIT. ### Simplified Setup Overview ![poc_setup](docs/setup.svg) ### 1) Installation ###### a. Flash custom firmware to ESP32 Before starting to use *BrakTooth* Sniffer, you need to upload a custom firmware to your ESP32 board: ```bash ./firmware.py flash /dev/ttyUSB0 # Change ttyUSB0 to match your port name ``` ###### b. Install Linux requirements (Ubuntu 18.04 / 20.04) ```bash git clone https://github.com/Matheus-Garbelini/esp32_bluetooth_classic_sniffer cd esp32_bluetooth_classic_sniffer ./requirements.sh # (sudo required) Installs latest wireshark and standalone python3 runtime ./build.sh # Build BT Host programs and Wireshark h4bcm dissector ``` ### 2) Usage Instructions ```bash Usage: BTSnifferBREDR.py [OPTIONS] Options: --port TEXT Serial port name (/dev/ttyUSBx for Linux) --host TEXT BDAddress of local host (default: E0:D4:E8:19:C7:68) --target TEXT BDAddress of remote target (ex: a8:96:75:25:c2:ac) --live-wireshark Opens Wireshark live session --live-terminal Show a summary of each packet on terminal --bridge-only Starts the HCI bridge without connecting any BT Host stack --help Show this message and exit. ``` You can start the sniffer in as either master or slave role. If you use add `--target` argument, the sniffer will attempt a connection to your remote target. Otherwise, it will just wait for someone to connect to it. Lastly, the `--bridge-only` only creates the HCI pseudo terminal (/dev/pts/x) so ESP32 can operate as a standard HCI BT controller. You can use this feature to connect any other BT host stack to ESP32. ##### Example 1 - **Connect** to remote target and start both Wireshark live capture and packets summary ```bash ./BTSnifferBREDR.py --port=/dev/ttyUSB0 --target=E0:D4:E8:19:C7:69 --live-terminal --live-wireshark ``` mode_master ##### Example 2 - **Wait** for BT connections and start both Wireshark live capture and terminal output ```bash ./BTSnifferBREDR.py --port=/dev/ttyUSB0 --live-terminal --live-wireshark ``` ##### Example 3 - Start sniffer in HCI mode (bridge-only) and start both Wireshark live capture and packets summary ```bash ./BTSnifferBREDR.py --port=/dev/ttyUSB0 --bridge-only --live-terminal --live-wireshark ``` mode_bridge_only ### 3) Customising BT Host programs (Profiles) Since *BrakTooth* sniffer uses a BT host stack to guide connectivity, the following modified BlueKitchen examples are used: * **host_stack/sdp_rfcomm_query** - This program initiates connection with slave device and attempts to perform SDP scanning and pairing. * **host_stack/spp_counter** - This program wait for connections and establish a spp (serial port) connection with the master device. You can modify or add BT profiles to the current programs by following the official documentation of *[BlueKitchen](https://bluekitchen-gmbh.com/btstack/#examples/examples/index.html)*. Note that folder `host_stack/bluekitchen/example/` already contain some profile examples. ### General Architecture The custom ESP32 BR/EDR Sniffer/Injector firmware communicates with the host system over a USB serial port and waits to receive custom commands or HCI commands. At startup, an HCI bridge is created to separate BrakTooth custom protocol from standard HCI commands sent or received from ESP32. Once the "RX/TX Sniffer" feature is enabled on the ESP32 firmware, Baseband packets are directly forwarded to *`BTSnifferBREDR.py`* script which simply decodes sniffed packets over the custom protocol and prints them via Scapy and/or dumps to Wireshark via live capture and to `logs` folder. ![arch.pdf](docs/arch.pdf.svg) ### Features Overview ![firmware_design](docs/firmware_design.pdf.svg) * **RX/TX Sniffer:** Dumps Baseband packets and forwards them to the host. Supported packets: * Baseband Header * NULL/POLL from remote target * FHS (no scapy layer for now) * EIR (no dissection for now) * ACL Header * LMP * **TX Interception:** This allows the host PC to modify TX packets in real-time before over-the-air transmission from ESP32. It requires however, an ESP32 board with high-speed USB such as [ESP-PROG](https://docs.espressif.com/projects/espressif-esp-iot-solution/en/latest/hw-reference/ESP-Prog_guide.html) or [ESP-WROVER-KIT](https://www.espressif.com/en/products/hardware/esp-wrover-kit/overview). Both of them have a [FTD2232H](https://ftdichip.com/products/ft2232hq/) USB to UART controller, which allows reduced USB pooling latency of *125us*. **(disabled for now, sorry)**. * **TX Injector:** This allows the host to inject BR/EDR packets immediately after the BT paging procedure and on every transmission slot (i.e. every 1.25ms) subjected to waits if there is something in ESP32 internal LMP queue. **(disabled for now, sorry)**. * **RX/TX Bypass:** Effectively "*blinds*" ESP32 BT stack from receiving or transmitting LMP packets after the paging procedure. One can use this to construct a standalone LMP state machine on the host and with Scapy :slightly_smiling_face:.​ This feature could enable something similar to what has been done in [SweynTooth nRF52 dongle](https://github.com/Matheus-Garbelini/sweyntooth_bluetooth_low_energy_attacks), but for BR/EDR. * **ROM Patcher:** Installs **ROM** hooks from inside the firmware. * **HCI IN/OUT:** Standard communication interface with the BT Host stack. A third-party stack such as [bluekitchen](https://github.com/bluekitchen/btstack). ### Acknowledgements The dissection of Baseband packets extends the [*InternalBlue* Broadcom Wireshark Dissector](https://github.com/seemoo-lab/h4bcm_wireshark_dissector). Specifically, the dissection extended the h4bcm Wireshark plugin to support a few more BT layers and our custom ESP32 metadata header. Thanks [@jiska2342](https://github.com/seemoo-lab/h4bcm_wireshark_dissector/commits?author=jiska2342). Thanks to all the following open-source projects: * Special thanks to [@Ebiroll](https://github.com/Ebiroll) for his maintenance on [Xtensa Module for Ghidra](https://github.com/Ebiroll/ghidra-xtensa) * [@mringwal](https://github.com/mringwal) for the excellent open-source [BlueKitchen BT Host Stack](https://github.com/bluekitchen/btstack) * [InternalBlue Project](https://github.com/seemoo-lab/internalblue) * [Scapy Packet Manipulation Library](https://github.com/secdev/scapy) * [Wireshark Project](https://gitlab.com/wireshark/wireshark)