[mcu mcu2]
restart_method: command
serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_190029000350563046353420-if00

[output_pin caselight ]
pin: mcu2:PB4
pwm: true
hardware_pwm: True
shutdown_value: 0.0
value:0.1
cycle_time: 0.001

[temperature_fan Chamber]
pin: mcu2:PB0
kick_start_time: 0.3
min_speed: 0.15
max_speed: 1.0
off_below: 0.15
cycle_time: 0.09
sensor_type: BME280
i2c_address: 119
i2c_mcu: rpi
i2c_bus: i2c.1
min_temp: 0
max_temp: 80
gcode_id: CHAMBER
target_temp: 0.0
control: pid
pid_Kp: 40
pid_Ki: 0.2
pid_Kd: 0.1

[controller_fan Electronics_Fan2]
pin: mcu2:PB2
max_power: 1.0
fan_speed: 1.0
kick_start_time: 0.5
idle_timeout: 600
idle_speed: 1.0
heater: extruder
stepper: stepper_x,stepper_y,stepper_z,stepper_z1,stepper_z2,stepper_z3,manual_stepper gear_stepper, manual_stepper selector_stepper
shutdown_speed: 1.0