[gcode_macro LIGHT_ON]
description: Innenbeleuchtung einschalten
gcode:
    SET_PIN PIN=caselight VALUE=1.0

[gcode_macro LIGHT_OFF]
description: Innenbeleuchtung ausschalten
gcode:
    SET_PIN PIN=caselight VALUE=0.0

[gcode_macro LIGHT_STBY]
description: Innenbeleuchtung dimmen
gcode:
    SET_PIN PIN=caselight VALUE=0.2

[gcode_macro G32]
description: Level, Gantry und Nozzle Park in der Front
gcode:
    LIGHT_STBY
    BED_MESH_CLEAR
    G28
    QUAD_GANTRY_LEVEL
    G28
    G0 X20 Y20 Z30 F3600
   
[gcode_macro PRINT_START]
description: Startmakro, vom Slicer aufgerufen
gcode:
    G32                            ; home all axes
    LIGHT_ON                       ; turn lights on
    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=Chamber TARGET=30
    HYPERLAPSE ACTION=START

[gcode_macro PRINT_START_STBY]
description: Startmakro, Homing QGL wird umgangen. PRINT_END_STBY vorher notwendig.
gcode:
    LIGHT_ON                       ; turn lights on
    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=Chamber TARGET=30
    HYPERLAPSE ACTION=START

[gcode_macro CANCEL_PRINT]
description: Druck abbrechen
rename_existing: BASE_CANCEL_PRINT
gcode:
	CLEAR_PAUSE
    TURN_OFF_HEATERS
	SDCARD_RESET_FILE
    G92 E0                         ; zero the extruder
    G1 E-5.0 F3600                 ; retract filament
    G91                            ; relative positioning
    G1 Z50 F3000                   ; move nozzle up 50mm
    G90                            ; absolute positioning
    G0 X20 Y20 F3600               ; park nozzle at front for maintenance
    BED_MESH_CLEAR
    M18                            ; Disable all steppers
    M107                           ; turn off fan
    LIGHT_STBY                     ; turn lights to standby
    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=Chamber TARGET=0 ;Case Fan abschalten
	SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=0
	BASE_CANCEL_PRINT
    HYPERLAPSE ACTION=STOP
	LIGHT_STBY
    ;TIMELAPSE_RENDER

[gcode_macro PRINT_END]
description: Endmakro, vom Slicer aufgerufen
gcode:
    M400                           ; wait for buffer to clear
    G92 E0                         ; zero the extruder
    G1 E-5.0 F3600                 ; retract filament
    G91                            ; relative positioning
    G0 Z5.00 X20.0 Y20.0 F20000    ; move nozzle to remove stringing
    TURN_OFF_HEATERS
    G1 Z2 F3000                    ; move nozzle up 2mm
    G90                            ; absolute positioning
    G0 X20 Y20 F3600               ; park nozzle at front for maintenance
    BED_MESH_CLEAR
    M18                            ; Disable all steppers
    M107                           ; turn off fan
    LIGHT_OFF                      ; turn lights off
    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=Chamber TARGET=0 ;turn off case fan
    HYPERLAPSE ACTION=STOP
    ;TIMELAPSE_RENDER   included in new version after stop

[gcode_macro PRINT_END_STBY]
description: Endmakro ohne Abschalten der Stepper
gcode:
    M400                           ; wait for buffer to clear
    G92 E0                         ; zero the extruder
    G1 E-5.0 F3600                 ; retract filament
    G91                            ; relative positioning
    G0 Z5.00 X20.0 Y20.0 F20000    ; move nozzle to remove stringing
    TURN_OFF_HEATERS
    G1 Z2 F3000                    ; move nozzle up 2mm
    G90                            ; absolute positioning
    G0 X20 Y20 F3600               ; park nozzle at front for maintenance
    BED_MESH_CLEAR
    M107                           ; turn off fan
    LIGHT_STBY                     ; turn lights off
    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=Chamber TARGET=0 ;turn off case fan
    HYPERLAPSE ACTION=STOP
    ;TIMELAPSE_RENDER   included in new version after stop

[gcode_macro PAUSE]
description: Druck pausieren
rename_existing: BASE_PAUSE
gcode:
  {% set x_park = printer.toolhead.axis_minimum.x|float + 5.0 %}
  {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
  {% set max_z = printer.toolhead.axis_maximum.z|float %}
  {% set act_z = printer.toolhead.position.z|float %}
  {% if act_z < (max_z - 5.0) %}
      {% set z_safe = 5.0 %}
  {% else %}
      {% set z_safe = max_z - act_z %}
  {% endif %}
  G92 E0
  G1 E-1.0 F1500.0
  G90
  SAVE_GCODE_STATE NAME=PAUSE_state
  BASE_PAUSE
  G91
  G1 Z{z_safe} F900
  G90
  G0 X{x_park} Y{y_park} F6000
  LIGHT_STBY

[gcode_macro RESUME]
description: Druck wieder aufnehmen
rename_existing: BASE_RESUME
gcode:
	LIGHT_ON
    {% if printer["gcode_macro ERCF_PAUSE"].is_paused|int != 0 %}
        M118 You can't resume the print without unlocking the ERCF first.
        M118 Run ERCF_UNLOCK and solve any issue before hitting Resume again
    {% else %}
        RESTORE_GCODE_STATE NAME=PAUSE_state
        G90
        {% if printer["gcode_macro ERCF_VAR"].clog_detection|int == 1 %}
            SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=1
        {% endif %}
        BASE_RESUME
    {% endif %}


[gcode_macro UNLOAD_FILAMENT]
description: Filament entladen (muss noch angepasst werden)
gcode:
    M109 S235
    M83
    G1 E15 F300
    G1 E-860 F1800
    M82
    G92 E0

[gcode_macro LOAD_FILAMENT]
description: Filament laden (muss noch angepasst werden)
gcode:
    M109 S235
    M83
    G1 E760 F1800
    G1 E30 F300
    G1 E-10 F1800
    M82
    G92 E0

[gcode_macro QUERY_BME680]
description: Bauraumsensor abfragen
gcode:
    {% set sensor = printer["bme280 Chamber"] %}
    {action_respond_info(
        "Temperature: %.2f C\n"
        "Pressure: %.2f hPa\n"
        "Humidity: %.2f%%\n"
        "VOC Gas: %.2f" % (
            sensor.temperature,
            sensor.pressure,
            sensor.humidity,
            sensor.gas))}

[gcode_macro QUERY_ACC]
description: Beschleunigungssensor am Druckkopf abfragen
gcode:
        ACCELEROMETER_QUERY