diff --git a/README.md b/README.md
index e631ee3..dc5dc1c 100644
--- a/README.md
+++ b/README.md
@@ -28,19 +28,21 @@ I try to integrate every datapoint from Batriums BMS to fill Victrons registers.
  - transfer of most alarms (instead of only voltage low alarm)
  - number of cells balancing
  - time to empty or full
- - capacity used
- - daily stats Ah and kWh charged, discharged (calculated)
- - correct transmitting of CVL (fixed with Batrium version 2.17.40.0 or downgrade to 2.17.27)
+ - capacity used and total Ah discharged
+ - daily stats like kWh charged, discharged (calculated)
+ - time since last full charge
+ - correct transmitting of CVL (Stock implementation fixed with Batrium version 2.17.40.0 or downgrade to 2.17.27)
 
 ## What is not working, needs improvement
  - capacity to full or to empty is not transmitted by Batrium (transmission of 0x00111900 is missing against documentation)
- - Ah used and kWh charged and discharged is calcualated by script (see above)
+ - Ah, kWh charged and discharged is calcualated by script (see above)
  - Capacity of battery must be entered into script batrium.py (see above)
  - dbus script is started by rc.local which gets executed last, so all mppts and multiplus' showing temporarily "BMS missing" and need to be cleared after (re-)boot of Venus OS
+ - include calculation of State Of Health, based on Ah discharge and SoC State after full charge, becuase Batrium does not have
 
 ### Victrons datapoints
    This script will emulate one of Victrons own BMS, therefore are many registers to fill, but I dont know how to fill all.
-   For example time to last full, where set timestamp or what mean average Ah discharged.
+   For example what means average Ah discharged. I implemented datapoints to my best knowledge and it is working for me.
 
 # dbus-node-red-XXX Service files