44 lines
No EOL
1.6 KiB
Text
44 lines
No EOL
1.6 KiB
Text
Steps taken to evaluate wolfSSL with the following:
|
|
|
|
Required Software for this guide:
|
|
IAR Embedded Workbench IDE - ARM v7.60.1 (or similar version)
|
|
embOS v4.16 (for Cortex-M and IAR compiler)
|
|
wolfssl (latest version)
|
|
|
|
Required items (Hardware) for this guide:
|
|
Atmel SAM V71 Xplained Ultra (Or equivalent Cortex-M Evaluation Board)
|
|
Note: Must have J-Trace adapter (SWD or SWD + ETM)
|
|
j-Trace for ARM Cortex-M Processors
|
|
Note: You can see here: https://www.segger.com/j-trace-for-cortex-m.html
|
|
Note: You can also purchase other models, we used one from IAR v3.2
|
|
20 pin target ribbon cable
|
|
USB Cable with j-Trace adapter end
|
|
Micro usb cable
|
|
|
|
#--!! NOTE !!--#
|
|
For this guide "**SAMV71_DIR" will signify the directory:
|
|
C:\<path-to>\wolfssl\IDE\IAR-EWARM\embOS\SAMV71_XULT\
|
|
|
|
|
|
#----------------------------------------------------------------------------#
|
|
# Create wolfcrypt_lib.a
|
|
#----------------------------------------------------------------------------#
|
|
|
|
1. Open IAR Workbench -> Project -> Add Existing Project
|
|
a. Browse to **SAMV71_DIR\embOS_wolfcrypt_lib
|
|
c. Choose wolfcrypt_lib.ewp and click "Open"
|
|
|
|
2. Go to Project -> Rebuild All
|
|
|
|
3. Verify the library built, you should now have:
|
|
**SAMV71_DIR\embOS_wolfcrypt_lib\Debug\Bin\wolfcrypt_lib.a
|
|
|
|
#----------------------------------------------------------------------------#
|
|
#----------------------------------------------------------------------------#
|
|
|
|
Thank you for using this guide and we hope this was helpful to you. If you have
|
|
any suggestions / feedback for us please contact us:
|
|
support@wolfssl.com
|
|
info@wolfssl.com
|
|
|
|
Copyright © 2016 wolfSSL Inc. All rights reserved. |