69 lines
2.7 KiB
Text
69 lines
2.7 KiB
Text
Steps taken to evaluate wolfSSL with the following:
|
|
|
|
Required Software for this guide:
|
|
IAR Embedded Workbench IDE - ARM v7.60.1 (or similar version)
|
|
embOS v4.16 (for Cortex-M and IAR compiler)
|
|
wolfssl (latest version)
|
|
|
|
Required items (Hardware) for this guide:
|
|
Atmel SAM V71 Xplained Ultra (Or equivalent Cortex-M Evaluation Board)
|
|
Note: Must have J-Trace adapter (SWD or SWD + ETM)
|
|
j-Trace for ARM Cortex-M Processors
|
|
Note: You can see here: https://www.segger.com/j-trace-for-cortex-m.html
|
|
Note: You can also purchase other models, we used one from IAR v3.2
|
|
20 pin target ribbon cable
|
|
USB Cable with j-Trace adapter end
|
|
Micro usb cable
|
|
|
|
#--!! NOTE !!--#
|
|
For this guide "**SAMV71_DIR" will signify the directory:
|
|
C:\<path-to>\wolfssl\IDE\IAR-EWARM\embOS\SAMV71_XULT\
|
|
|
|
#----------------------------------------------------------------------------#
|
|
# Setup file system to evaluate wolfssl in embOS project:
|
|
# (If you have not already done so)
|
|
#----------------------------------------------------------------------------#
|
|
|
|
1. In wolfssl you will notice the directory:
|
|
wolfssl\IDE\IAR-EWARM\embOS\extract_trial_here
|
|
|
|
2. go to embOS website and download a trial for your platform
|
|
https://www.segger.com/downloads/embos ->
|
|
embOS trial for Cortex-M and IAR compiler
|
|
|
|
3. Extract (unzip) the download to
|
|
C:\<path-to>\wolfssl\IDE\IAR-EWARM\embOS\extract_trial_here\
|
|
(Note: you do not need to do anything further in this directory, the
|
|
wolfSSL evaluation projects will simply link against it)
|
|
|
|
#----------------------------------------------------------------------------#
|
|
# Evaluate wolfcrypt_tests in embOS project:
|
|
#----------------------------------------------------------------------------#
|
|
|
|
1. In IAR Workbench go to Project -> Add Existing Project
|
|
a. Browse to **SAMV71_DIR\embOS_wolfcrypt_test_SAMV71_XULT\
|
|
b. Choose wolfcrypt_test.ewp and click "Open"
|
|
|
|
2. Go to Project -> Rebuild All
|
|
|
|
3. Connect your SAMV71 Xplained Ultra to your PC with micro USB in the "Debug"
|
|
port for power and the J-Link hooked up to SWD pins and your PC
|
|
|
|
4. Go to Project -> Download and Debug
|
|
|
|
5. Once the "Debug" environment has loaded go to: View -> Terminal I/O
|
|
(This is where the printf's will be directed to)
|
|
|
|
6. Hit "Go" (Debug option with 3 right arrows "→→→")
|
|
|
|
7. You should observe the tests run and pass.
|
|
|
|
#----------------------------------------------------------------------------#
|
|
#----------------------------------------------------------------------------#
|
|
|
|
Thank you for using this guide and we hope this was helpful to you. If you have
|
|
any suggestions / feedback for us please contact us:
|
|
support@wolfssl.com
|
|
info@wolfssl.com
|
|
|
|
Copyright © 2016 wolfSSL Inc. All rights reserved.
|