OVMS3/OVMS.V3/components/vehicle_renaultzoe_ph2_obd/docs/index.rst

46 lines
2 KiB
ReStructuredText

=======================
Renault Zoe Phase 2 (OBD port)
=======================
Vehicle Type: **RZ2O**
This vehicle type supports the Renault Zoe(PH2) through OBD connection.
All values are read-only, no control possible because of CAN Gateway.
----------------
Support Overview
----------------
=========================== ==============
Function Support Status
=========================== ==============
Hardware OVMS v3.3
Vehicle Cable OBD-II to DB9 Data Cable for OVMS (Generic OBD2 Cable (left))
GSM Antenna 1000500 Open Vehicles OVMS GSM Antenna (or any compatible antenna)
GPS Antenna 1020200 Universal GPS Antenna (SMA Connector) (or any compatible antenna)
SOC Display Yes
Range Display Yes
GPS Location Yes (from modem module GPS)
Speed Display Yes
Temperature Display Yes (Battery, Outside, Cabin, Motor, Inverter, Tyres)
BMS v+t Display Yes
TPMS Display Zoe Yes (Pressure and temperature)
Charge Status Display Yes
Charge Interruption Alerts Yes
Charge Control No (planned, but access to CAN after gw neccessary)
Cabin Pre-heat/cool Control No (planned, but access to CAN after gw neccessary)
Lock/Unlock Vehicle Yes (display only)
Valet Mode Control No
=========================== ==============
Others:
Door open/close Yes (exclude hood)
Battery full charge cycles Yes
Battery max charge, recd pwr Yes
Trip counter from Car No (was included, but datapoint is extremly unreliable)
Battery lifetime gauges Yes (Charged, Recd and Used kWh)
Heat pump power, rpm and hp press. Yes
Aux power gauges Yes (testing needed)
Charge type Yes (DC charge, testing needed)
Headlights Status Yes (lowbeam)
Charge efficiency calculation Yes (but only for AC, pf is measured with power analyzer and included as statics)