OVMS3/OVMS.V3/components/vehicle_renaultzoe_ph2_can/docs/index.rst

50 lines
2.1 KiB
ReStructuredText

=======================================
Renault Zoe Phase 2 (CAN direct access)
=======================================
Vehicle Type: **RZ2C**
This vehicle type supports the Renault Zoe(PH2) through direct CAN connection.
You connect CAN1 interface of the OVMS module to M-CAN bus on your Zoe, you can intercept it at TCU, Radio (IVI) or Can Core Gateway behind glovebox.
----------------
Support Overview
----------------
=========================== ==============
Function Support Status
=========================== ==============
Hardware OVMS v3.3
Vehicle Cable DIY cable to intercept M-CAN on TCU, Radio/IVI or Can Core Gateway
GSM Antenna SMA to Fakra adapter, if you use Zoes antennas (disconnect TCU)
GPS Antenna SMA to Fakra adapter, if you use Zoes antennas (disconnect TCU)
SOC Display Yes
Range Display Yes
GPS Location Yes (from modem module GPS)
Speed Display Yes
Temperature Display Yes (Battery, Outside, Cabin, Motor, Inverter, Tyres)
BMS v+t Display Yes
TPMS Display Zoe Yes (Pressure and temperature)
Charge Status Display Yes
Charge Interruption Alerts Yes
Charge Control No
Cabin Pre-heat/cool Control No
Lock/Unlock Vehicle No
Valet Mode Control No
=========================== ==============
Others:
=================================== ==============
Door open/close Yes (exclude hood)
Battery full charge cycles Yes
Battery max charge, recd pwr Yes
Trip counter from Car No
Battery lifetime gauges Yes (Charged, Recd and Used kWh)
Heat pump power, rpm and hp press. Yes
Aux power gauges Yes (testing needed)
Charge type Yes (DC charge, testing needed)
Headlights Status Yes (lowbeam)
Charge efficiency calculation Yes (but only for AC, pf is measured with power analyzer and included as statics)
=================================== ==============