Crash_Override/OVMS3
2
0
Fork 0
Code Issues 5 Pull requests Projects Releases 4 Wiki Activity
OVMS3/OVMS.V3/components/wolfssh/ide/Renesas/cs+
History
Carsten Schmiemann e418d3ab82 Initial commit, fork from original Project
2022-04-06 00:04:46 +02:00
..
common Initial commit, fork from original Project 2022-04-06 00:04:46 +02:00
demo_server Initial commit, fork from original Project 2022-04-06 00:04:46 +02:00
wolfssh_lib Initial commit, fork from original Project 2022-04-06 00:04:46 +02:00
wolfssl_lib Initial commit, fork from original Project 2022-04-06 00:04:46 +02:00
README.md Initial commit, fork from original Project 2022-04-06 00:04:46 +02:00
README_jp.md Initial commit, fork from original Project 2022-04-06 00:04:46 +02:00

README.md

wolfSSH/AlphaProject Boad Simple Ssh Example Server Setup Guide

This demo is tested with the following condition.

  • Renesas : CS+ v8.01
  • Board : Alpha Project AP-RX71M-0A w/ Sample program v2.0
  • wolfSSL : 4.0.0
  • wolfSSH : 1.3.1

Setup process:

1. Download software

  • Unzip AlphaProject firmware
  • Unzip wolfssl under the same directory
  • Unzip wolfssh under the same directory

2. Set up wolfSSL and wolfSSH

  • Open wolfssh\ide\Renesas\cs+\wolfssl_lib\wolfssl_lib.mtpj with CS+ and build
  • Open wolfssh\ide\Renesas\cs+\wolfssh_lib\wolfssh_lib.mtpj with CS+ and build
  • Open demo_server.mtpj and build. This create demo program library.

3. Set up AlphaProject

  • The demo uses ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_usbfunc_sample_cs\ap_rx71m_0a_ether_sample_cs.mtpj
  • Open and edit ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_usbfunc_sample_cs\src\AP_RX71M_0A.c
    insert wolfSSL_init() in UsbfInit().
    CanInit();
    SciInit();
    EthernetAppInit();
    UsbfInit();
    wolfSSL_init(); <- insert this line
  • Modify stack and heap size in ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_usbfunc_sample_cs\src\smc_gen\r_config\r_bsp_config.h
    Line 154 #pragma stacksize su=0x2000
    Line 175 #define BSP_CFG_HEAP_BYTES  (0xa000)
  • Modify IP address Sample\ap_rx71m_0a_usbfunc_sample_cs\src\tcp_sample\config_tcpudp.c as needed
   #define MY_IP_ADDR0     192,168,1,200           /* Local IP address  */
   #define GATEWAY_ADDR0   192,168,1,254           /* Gateway address (invalid if all 0s) */
   #define SUBNET_MASK0    255,255,255,0

  • Add project properties of linking library in ap_rx71m_0a_usbfunc_sample_cs.mtpj
    wolfssh\ide\Renesas\cs+\Projects\wolfssl_lib\DefaultBuild\wolfssl_lib.lib
    wolfssh\ide\Renesas\cs+\Projects\wolfssh_lib\DefaultBuild\wolfssh_lib.lib
    　 wolfssh\ide\Renesas\cs+\Projects\demo_server\DefaultBuild\demo_sever.lib

  • Set CC-RX(Build Tool)->Library Geberation->Library Configuration to"C99" and enable ctype.h.

  • Build the project and start execut. You see message on the console prompting command.

    Start server_test
  • wolfSSH simple server will be open on port 50000 which can be connected to by using the example client bundled with wolfSSH
    $ ./examples/client/client -h 192.168.1.200 -p 50000 -u jill
    Sample public key check callback
    public key = 0x55a0890864ea
    public key size = 279
    ctx = You've been sampled!
    Password: <---- input "upthehill"
    Server said: Hello, wolfSSH!

Support

Email us at support@wolfssl.com.