164 lines
10 KiB
C
164 lines
10 KiB
C
|
|
//
|
|
// Warning: don't edit - generated by generate_ecu_code.pl processing ../dev/lim_i1.json: LIM 14: Charging interface module
|
|
// This generated code makes it easier to process CANBUS messages from the LIM ecu in a BMW i3
|
|
//
|
|
|
|
#define I3_ECU_LIM_TX 0x06F114
|
|
#define I3_ECU_LIM_RX 0x0614F1
|
|
|
|
#define I3_PID_LIM_STATUS_CALCVN 0x2541
|
|
// Read out Cal-ID (Calibration-ID) and CVN (Calibration Verification Number). (OBD scopes) Byte layout: 20 bytes
|
|
// long 00-15 = STAT_CALID_WERT 16-19 = STAT_CVN_EINH as Hex unit32 in Intel format / Cal-ID (Calibration-ID) und
|
|
// CVN(Calibration Verification Number) auslesen. (OBD-Umfänge) Byte-Layout: 20 Byte lang 00-15 =
|
|
// STAT_CALID_WERT 16-19 = STAT_CVN_EINH als Hex unit32 im Intel Format
|
|
|
|
// Can't yet generate code for STAT_CALID_TEXT of type string[16], at offset 0. But we account for the 16 bytes
|
|
// Read out Cal ID (here the Cal ID must be output as in mode $ 09 (PID $ 04)) / Cal-ID auslesen (hier muss die
|
|
// Cal-ID wie bei Mode $09 (PID $04) ausgegeben werden).
|
|
|
|
#define I3_RES_LIM_STAT_CVN_WERT (RXBUF_UINT32(16))
|
|
#define I3_RES_LIM_STAT_CVN_WERT_UNIT 'HEX'
|
|
#define I3_RES_LIM_STAT_CVN_WERT_TYPE unsigned long
|
|
// Read out CVN (here the CVN must be output as in mode $ 09 (PID $ 06)) / CVN auslesen (hier muss die CVN wie
|
|
// bei Mode $09 (PID $06) ausgegeben werden)
|
|
|
|
// Skipping ZV_LADESTECKER_CN on 0xDB0E which takes arguments
|
|
|
|
#define I3_PID_LIM_LADESTECKDOSE_TEMPERATUR 0xDB0F
|
|
// Temperature of the DC charging connection in ° C (China) / Temperatur der DC-Ladeanschluss in °C (China)
|
|
|
|
#define I3_RES_LIM_STAT_LADESTECKDOSE_TEMP_WERT (RXBUF_UINT(0)/10.0f-40.0)
|
|
#define I3_RES_LIM_STAT_LADESTECKDOSE_TEMP_WERT_UNIT '°C'
|
|
#define I3_RES_LIM_STAT_LADESTECKDOSE_TEMP_WERT_TYPE float
|
|
// Temperature of the DC charging connection in ° C (China) / Temperatur der DC-Ladeanschluss in °C (China)
|
|
|
|
// Skipping LADEN_HOSPITALITY_FUNKTION on 0xDE6B which takes arguments
|
|
|
|
// Skipping ZV_LADESTECKER on 0xDEF0 which takes arguments
|
|
|
|
// Skipping ZV_LADEKLAPPE on 0xDEF1 which takes arguments
|
|
|
|
#define I3_PID_LIM_LADEBEREITSCHAFT_LIM 0xDEF2
|
|
// Ready to charge (HW line), (1 = yes, 0 = no) sent from LIM to SLE / Ladebereitschaft (HW-Leitung), (1 = ja, 0
|
|
// = nein) vom LIM an SLE gesendet
|
|
|
|
#define I3_RES_LIM_STAT_LADEBEREITSCHAFT_LIM (RXBUF_UCHAR(0))
|
|
#define I3_RES_LIM_STAT_LADEBEREITSCHAFT_LIM_UNIT '0/1'
|
|
#define I3_RES_LIM_STAT_LADEBEREITSCHAFT_LIM_TYPE unsigned char
|
|
// Ready to charge (HW line), (1 = yes, 0 = no) sent from LIM to SLE / Ladebereitschaft (HW-Leitung), (1 = ja, 0
|
|
// = nein) vom LIM an SLE gesendet
|
|
|
|
// Skipping LED_LADESTATUS on 0xDEF3 which takes arguments
|
|
|
|
// Skipping LED_SUCHBELEUCHTUNG on 0xDEF4 which takes arguments
|
|
|
|
#define I3_PID_LIM_PROXIMITY 0xDEF5
|
|
// Current status of the proximity / Aktueller Zustand des Proximity
|
|
|
|
#define I3_RES_LIM_STAT_STECKER_NR (RXBUF_UCHAR(0))
|
|
#define I3_RES_LIM_STAT_STECKER_NR_UNIT '0-n'
|
|
#define I3_RES_LIM_STAT_STECKER_NR_TYPE unsigned char
|
|
// Condition of the plug / Zustand des Steckers
|
|
|
|
#define I3_RES_LIM_STAT_STROMTRAGFAEHIGKEIT_WERT (RXBUF_UCHAR(1))
|
|
#define I3_RES_LIM_STAT_STROMTRAGFAEHIGKEIT_WERT_UNIT 'A'
|
|
#define I3_RES_LIM_STAT_STROMTRAGFAEHIGKEIT_WERT_TYPE unsigned char
|
|
// Current carrying capacity of the connected cable / Stromtragfähigkeit des angeschlossenen Kabels
|
|
|
|
#define I3_PID_LIM_PILOTSIGNAL 0xDEF6
|
|
// current data of the pilot signal about the charging current / aktuelle Daten des Pilotsignals über den
|
|
// Ladestrom
|
|
|
|
#define I3_RES_LIM_STAT_PILOT_AKTIV (RXBUF_UCHAR(0))
|
|
#define I3_RES_LIM_STAT_PILOT_AKTIV_UNIT '0/1'
|
|
#define I3_RES_LIM_STAT_PILOT_AKTIV_TYPE unsigned char
|
|
// State of the pilot signal (0 = not active, 1 = active) / Zustand des Pilotsignals (0 = nicht aktiv, 1 = aktiv)
|
|
|
|
#define I3_RES_LIM_STAT_PILOT_PWM_DUTYCYCLE_WERT (RXBUF_UCHAR(1))
|
|
#define I3_RES_LIM_STAT_PILOT_PWM_DUTYCYCLE_WERT_UNIT '%'
|
|
#define I3_RES_LIM_STAT_PILOT_PWM_DUTYCYCLE_WERT_TYPE unsigned char
|
|
// Pulse duty factor PWM pilot signal / Tastverhältnis PWM Pilotsignal
|
|
|
|
#define I3_RES_LIM_STAT_PILOT_CURRENT_WERT (RXBUF_UCHAR(2))
|
|
#define I3_RES_LIM_STAT_PILOT_CURRENT_WERT_UNIT 'A'
|
|
#define I3_RES_LIM_STAT_PILOT_CURRENT_WERT_TYPE unsigned char
|
|
// Current value calculated from the pilot signal / Errechneter Stromwert aus Pilotsignal
|
|
|
|
#define I3_RES_LIM_STAT_PILOT_LADEBEREIT (RXBUF_UCHAR(3))
|
|
#define I3_RES_LIM_STAT_PILOT_LADEBEREIT_UNIT '0/1'
|
|
#define I3_RES_LIM_STAT_PILOT_LADEBEREIT_TYPE unsigned char
|
|
// Vehicle ready to charge state (0 = not ready to charge, 1 = ready to charge) / Zustand Ladebereitschaft
|
|
// Fahrzeug (0 = nicht ladebereit, 1 = ladebereit)
|
|
|
|
#define I3_RES_LIM_STAT_PILOT_FREQUENZ_WERT (RXBUF_UINT(4))
|
|
#define I3_RES_LIM_STAT_PILOT_FREQUENZ_WERT_UNIT 'Hz'
|
|
#define I3_RES_LIM_STAT_PILOT_FREQUENZ_WERT_TYPE unsigned short
|
|
// Frequency of the pilot signal / Frequenz des Pilotsignals
|
|
|
|
#define I3_RES_LIM_STAT_PILOT_PEGEL_WERT (RXBUF_UCHAR(6)/10.0f)
|
|
#define I3_RES_LIM_STAT_PILOT_PEGEL_WERT_UNIT 'V'
|
|
#define I3_RES_LIM_STAT_PILOT_PEGEL_WERT_TYPE float
|
|
// Pilot signal level / Pegel des Pilotsignals
|
|
|
|
#define I3_PID_LIM_LADESCHNITTSTELLE_DC_TEPCO 0xDEF7
|
|
// Status of the batch control lines / Status der Chargecontroll Leitungen
|
|
|
|
#define I3_RES_LIM_STAT_CHARGE_CONTROL_1 (RXBUF_UCHAR(0))
|
|
#define I3_RES_LIM_STAT_CHARGE_CONTROL_1_UNIT '0/1'
|
|
#define I3_RES_LIM_STAT_CHARGE_CONTROL_1_TYPE unsigned char
|
|
// Charge control status 1 line (0 = not active, 1 = active) / Zustand Charge control 1 Leitung (0 = nicht aktiv,
|
|
// 1 = aktiv)
|
|
|
|
#define I3_RES_LIM_STAT_CHARGE_CONTROL_2 (RXBUF_UCHAR(1))
|
|
#define I3_RES_LIM_STAT_CHARGE_CONTROL_2_UNIT '0/1'
|
|
#define I3_RES_LIM_STAT_CHARGE_CONTROL_2_TYPE unsigned char
|
|
// Charge control status 2 line (0 = not active, 1 = active) / Zustand Charge control 2 Leitung (0 = nicht aktiv,
|
|
// 1 = aktiv)
|
|
|
|
#define I3_RES_LIM_STAT_CHARGE_PERMISSION (RXBUF_UCHAR(2))
|
|
#define I3_RES_LIM_STAT_CHARGE_PERMISSION_UNIT '0/1'
|
|
#define I3_RES_LIM_STAT_CHARGE_PERMISSION_TYPE unsigned char
|
|
// Charge permission line status (0 = not active, 1 = active) / Zustand Charge Permission Leitung (0 = nicht
|
|
// aktiv, 1 = aktiv)
|
|
|
|
#define I3_RES_LIM_STAT_LADESTECKER (RXBUF_UCHAR(3))
|
|
#define I3_RES_LIM_STAT_LADESTECKER_UNIT '0/1'
|
|
#define I3_RES_LIM_STAT_LADESTECKER_TYPE unsigned char
|
|
// State of charging plug (0 = not plugged in, 1 = plugged in) / Zustand Ladestecker (0 = nicht gesteckt, 1 =
|
|
// gesteckt)
|
|
|
|
#define I3_PID_LIM_DC_SCHUETZ_SCHALTER 0xDEF8
|
|
// Contactor switch status (DC charging) / Status Schützschalter (DC-Laden)
|
|
|
|
#define I3_RES_LIM_STAT_DC_SCHUETZ_SCHALTER (RXBUF_UCHAR(0))
|
|
#define I3_RES_LIM_STAT_DC_SCHUETZ_SCHALTER_UNIT '0-n'
|
|
#define I3_RES_LIM_STAT_DC_SCHUETZ_SCHALTER_TYPE unsigned char
|
|
// Contactor switch status (DC charging) / Status Schützschalter (DC-Laden)
|
|
|
|
#define I3_PID_LIM_DC_SCHUETZ_SPANNUNG_EINGANG 0xDEF9
|
|
// Voltage at the input of the relay box (contactors) for DC charging / Spannung am Eingang der Relaisbox
|
|
// (Schaltschütze) für DC-Laden
|
|
|
|
#define I3_RES_LIM_STAT_DC_SCHUETZ_SPANNUNG_EINGANG_WERT (RXBUF_UINT(0))
|
|
#define I3_RES_LIM_STAT_DC_SCHUETZ_SPANNUNG_EINGANG_WERT_UNIT 'V'
|
|
#define I3_RES_LIM_STAT_DC_SCHUETZ_SPANNUNG_EINGANG_WERT_TYPE unsigned short
|
|
// Voltage at the input of the relay box (contactors) for DC charging / Spannung am Eingang der Relaisbox
|
|
// (Schaltschütze) für DC-Laden
|
|
|
|
#define I3_RES_LIM_STAT_DC_SCHUETZ_SPANNUNG_NEGATIV (RXBUF_UCHAR(2))
|
|
#define I3_RES_LIM_STAT_DC_SCHUETZ_SPANNUNG_NEGATIV_UNIT '0/1'
|
|
#define I3_RES_LIM_STAT_DC_SCHUETZ_SPANNUNG_NEGATIV_TYPE unsigned char
|
|
// Detection of a negative voltage (0 = no or positive voltage / 1 = negative voltage) / Erkennung einer
|
|
// negativen Spannung (0 = keine oder positive Spannung / 1 = negative Spannung)
|
|
|
|
#define I3_PID_LIM_DC_PINABDECKUNG_COMBO 0xDEFA
|
|
// State of the DC pin cover for combo socket (0 = closed, 1 = open) / Zustand der DC Pinabdeckung bei
|
|
// Combo-Steckdose (0 = geschlossen, 1 = geöffnet)
|
|
|
|
#define I3_RES_LIM_STAT_DC_PINABDECKUNG (RXBUF_UCHAR(0))
|
|
#define I3_RES_LIM_STAT_DC_PINABDECKUNG_UNIT '0/1'
|
|
#define I3_RES_LIM_STAT_DC_PINABDECKUNG_TYPE unsigned char
|
|
// State of the DC pin cover for combo socket (0 = closed, 1 = open) / Zustand der DC Pinabdeckung bei
|
|
// Combo-Steckdose (0 = geschlossen, 1 = geöffnet)
|