4097 lines
260 KiB
C
4097 lines
260 KiB
C
|
|
//
|
|
// Warning: don't edit - generated by generate_ecu_code.pl processing ../dev/dsc_i1.json: DSC 29: Dynamic stability controller
|
|
// This generated code makes it easier to process CANBUS messages from the DSC ecu in a BMW i3
|
|
//
|
|
|
|
#define I3_ECU_DSC_TX 0x06F129
|
|
#define I3_ECU_DSC_RX 0x0629F1
|
|
|
|
#define I3_PID_DSC_FS_LOESCHEN_PERMANENT 0x1060
|
|
// Job to delete the permanent DTCs / Job zum Löschen der Permanent-DTCs
|
|
|
|
#define I3_PID_DSC_FEHLERSPEICHER_ENDE_WERKSABLAUF 0x1061
|
|
// Deletion of individual errors and permanent DTCs prevented / Löschen von Einzelfehlern und Permanent-DTCs
|
|
// unterbindet
|
|
|
|
#define I3_RES_DSC_STAT_FS_ENDE_WABL (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_FS_ENDE_WABL_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_FS_ENDE_WABL_TYPE unsigned char
|
|
// 0: Locked (deletion of individual errors and PDTCs is prevented) 1: Unlocked (deletion of individual errors
|
|
// and PDTCs is not prevented) / 0: Verriegelt (loeschen von Einzelfehlern und PDTCs wird unterbunden) 1:
|
|
// Entriegelt (loeschen von Einzelfehlern und PDTCs wird nicht unterbunden)
|
|
|
|
#define I3_PID_DSC_START_ADAPTIVDATEN_RUECKSETZEN 0xA051
|
|
// Start and status reset adaptive data / Start und Status Ruecksetzen Adaptivdaten
|
|
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_TYPE unsigned char
|
|
// Execution status / Ausführungsstatus
|
|
|
|
#define I3_PID_DSC_STEUERN_AX_AY_ABGLEICH 0xA052
|
|
// Start and status comparison of accelerometers / Starten und Status Abgleich Beschleunigungssensoren
|
|
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XA052 (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XA052_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XA052_TYPE unsigned char
|
|
// Execution status / Ausführungsstatus
|
|
|
|
#define I3_PID_DSC_START_ADAPTIVDATEN_WERKSMODUS 0xA053
|
|
// Start and status standardization adaptive data / Starten und Status Standardisierung Adaptivdaten
|
|
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XA053 (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XA053_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XA053_TYPE unsigned char
|
|
// Execution status / Ausführungsstatus
|
|
|
|
#define I3_PID_DSC_STEUERN_ADAPTIVDATEN_SLW_RESET 0xA05B
|
|
// Start and status total steering angle reset / Start und Status Summenlenkwinkel Reset
|
|
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XA05B (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XA05B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XA05B_TYPE unsigned char
|
|
// Execution status / Ausführungsstatus
|
|
|
|
#define I3_RES_DSC_STAT_DATEN_SCHREIBEN_AKTIV_NR (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_DATEN_SCHREIBEN_AKTIV_NR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_DATEN_SCHREIBEN_AKTIV_NR_TYPE unsigned char
|
|
// Information as to whether the adaptive data is being written. / Information ob der Schreibvorgang der
|
|
// Adaptivdaten läuft.
|
|
|
|
// Skipping DSC_ENTLUEFTUNG on 0xA061 which takes arguments
|
|
|
|
// Skipping DSC_VENTILE_PULS on 0xA064 which takes arguments
|
|
|
|
// Skipping RADDREHZAHLSENSORPRUEFUNG on 0xA065 which takes arguments
|
|
|
|
// Skipping DSC_PUMPENFUNKTIONSPRUEFUNG on 0xA066 which takes arguments
|
|
|
|
// Skipping BPWS_INITIALISIERUNG on 0xA067 which takes arguments
|
|
|
|
#define I3_PID_DSC_RPA_RESET_STATISTIK 0xA068
|
|
// Reset RPA learning data statistics / Reset RPA Lerndaten Statistik
|
|
|
|
// Skipping DSC_VAKUUMBEFUELLUNG on 0xA06D which takes arguments
|
|
|
|
#define I3_PID_DSC_DSC_DRUCKSENSOREN_KALIBRIERUNG 0xA070
|
|
// Starting and stopping calibration of DSC pressure sensors / Starten und Stoppen Kalibrierung DSC Drucksensoren
|
|
|
|
#define I3_PID_DSC_RPA_RESET_STANDARDISIERUNG 0xA074
|
|
// Reset RPA standardization / Reset RPA Standardisierung
|
|
|
|
#define I3_PID_DSC_DAC_RESET 0xA087
|
|
// Reset of the learning values for the Driver Attention Control (drowsiness detection) / Reset der Lernwerte für
|
|
// die Driver Attention Control (Müdigkeitserkennung)
|
|
|
|
#define I3_PID_DSC_DAC_AUSLOESUNG 0xA088
|
|
// Triggering of a drowsiness warning from Driver Attention Control / Auslösung einer Müdigkeitswarnung der
|
|
// Driver Attention Control
|
|
|
|
// Skipping VENTILE_KALIBRIERUNG on 0xA08F which takes arguments
|
|
|
|
#define I3_PID_DSC_IPB_LED 0xA123
|
|
// The service switches the IPB switch LED on / off and outputs the LED status. / Der Service schaltet die IPB
|
|
// Switch LED ein-/aus und gibt den LED Zustand aus.
|
|
|
|
#define I3_RES_DSC_STAT_IPB_LED_ZUSTAND (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_IPB_LED_ZUSTAND_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_IPB_LED_ZUSTAND_TYPE unsigned char
|
|
// 0- LED off, 1-LED on / 0- LED aus, 1-LED an
|
|
|
|
#define I3_PID_DSC_FLM_RESET 0xA130
|
|
// Field Load Manager (FLM) data / Field Load Manager (FLM) Daten
|
|
|
|
#define I3_RES_DSC_STAT_FLM_RESET (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_FLM_RESET_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_FLM_RESET_TYPE unsigned char
|
|
// Execution status / Ausführungsstatus
|
|
|
|
// Skipping EPB_ACTION_REQUEST on 0xA193 which takes arguments
|
|
|
|
#define I3_PID_DSC_EXTERNE_ANFORDERUNG_GKU_IPB_ZAEHLER_RUECKSETZEN 0xA1AA
|
|
// Reset counter for transfer by external request gear / Zaehler fuer Uebernahmen durch externe Anforderung
|
|
// Getriebe ruecksetzen
|
|
|
|
#define I3_PID_DSC_EXTERNE_ANFORDERUNG_EPB_ZAEHLER_RUECKSETZEN 0xA1BE
|
|
// Reset counter for external request gear / Zähler für externe Anforderung Getriebe rücksetzen
|
|
|
|
#define I3_PID_DSC_DSC_PUMPENFUNKTIONSTEST 0xA222
|
|
// Starting, stopping and status function test pump / Starten, Stoppen und Status Funktionstest Pumpe
|
|
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XA222 (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XA222_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XA222_TYPE unsigned char
|
|
// Execution status / Ausführungsstatus
|
|
|
|
#define I3_RES_DSC_STAT_PUMPENLEISTUNG_LEERLAUF_WERT (RXBUF_UINT(1)/100.0f)
|
|
#define I3_RES_DSC_STAT_PUMPENLEISTUNG_LEERLAUF_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_PUMPENLEISTUNG_LEERLAUF_WERT_TYPE float
|
|
// Pump output during circulation (idling without resistance, no active brake pressure build-up) / Pumpenleistung
|
|
// während Kreisförderung (Leerlauf ohne Wiederstand, kein aktiver Bremsdruckaufbau)
|
|
|
|
#define I3_RES_DSC_STAT_PUMPENLEISTUNG_KREIS_1_WERT (RXBUF_UINT(3)/100.0f)
|
|
#define I3_RES_DSC_STAT_PUMPENLEISTUNG_KREIS_1_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_PUMPENLEISTUNG_KREIS_1_WERT_TYPE float
|
|
// Pump output during load against the isolating valve in the primary brake circuit / Pumpenleistung während
|
|
// Belastung gegen das Trennventil im primären Bremskreis
|
|
|
|
#define I3_RES_DSC_STAT_PUMPENLEISTUNG_KREIS_2_WERT (RXBUF_UINT(5)/100.0f)
|
|
#define I3_RES_DSC_STAT_PUMPENLEISTUNG_KREIS_2_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_PUMPENLEISTUNG_KREIS_2_WERT_TYPE float
|
|
// Pump output during load against the isolating valve in the secondary brake circuit / Pumpenleistung während
|
|
// Belastung gegen das Trennventil im sekundären Bremskreis
|
|
|
|
#define I3_PID_DSC_STEUERN_ANTI_POWER_HOP_FUNKTION_ZAEHLER_RUECKSETZEN 0xA2A2
|
|
// This diagnostic job can be used to reset the counter of the anti-power HOP function. / Mit diesem Diagnosejob
|
|
// kann der Zaehler der Anti-Power-HOP-Funktion zurückgesetzt werden.
|
|
|
|
// Skipping EMF_VERFAHREN on 0xA803 which takes arguments
|
|
|
|
#define I3_PID_DSC_STEUERN_EEPROM_SCHREIBEN 0xAB5B
|
|
// Start and status of saving learning data / Start und Status Abspeichern Lerndaten
|
|
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XAB5B (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XAB5B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XAB5B_TYPE unsigned char
|
|
// Execution status / Ausführungsstatus
|
|
|
|
#define I3_RES_DSC_STAT_EEPROM_SICHERN_NR (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_EEPROM_SICHERN_NR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_EEPROM_SICHERN_NR_TYPE unsigned char
|
|
// Status of the EEPROM backup 0 = backup successful 1 = backup running / Status der EEPROM Sicherung
|
|
// 0=Sicherung erfolgreich 1= Sicherung läuft
|
|
|
|
#define I3_PID_DSC_START_ADAPTIVDATEN_WERKSMODUS_2 0xABA3
|
|
// Initialization of the learning values of the self-steering behavior function. / Initialisierung der Lernwerte
|
|
// der Funktion Eigenlenkverhalten .
|
|
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XABA3 (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XABA3_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ROUTINE_STATUS_0XABA3_TYPE unsigned char
|
|
// Execution status / Ausführungsstatus
|
|
|
|
#define I3_PID_DSC_GMK_DATEN 0xD09A
|
|
// Reading out GMK data / Auslesen GMK Daten
|
|
|
|
#define I3_RES_DSC_STAT_ZUSTAND_IST_GMK_WERT (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_ZUSTAND_IST_GMK_WERT_TYPE unsigned char
|
|
// Actual status of the GMK function (depending on the qualifiers of the inputs) / Ist-Zustand der GMK-Funktion
|
|
// (abhängig von Qualifiern der Eingänge)
|
|
|
|
#define I3_RES_DSC_STAT_ZUSTAND_SOLL_GMK_WERT (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_ZUSTAND_SOLL_GMK_WERT_TYPE unsigned char
|
|
// Target state of the GMK function / Soll-Zustand der GMK-Funktion
|
|
|
|
#define I3_RES_DSC_STAT_MMOTOR_OFFSET_EPS_WERT (RXBUF_SCHAR(2)/100.0f)
|
|
#define I3_RES_DSC_STAT_MMOTOR_OFFSET_EPS_WERT_UNIT 'Nm'
|
|
#define I3_RES_DSC_STAT_MMOTOR_OFFSET_EPS_WERT_TYPE float
|
|
// Offset motor torque, which the EPS additively superimposes on its own motor torque / Offset-Motormoment, das
|
|
// die EPS dem eigenen Motormoment additiv überlagert
|
|
|
|
#define I3_RES_DSC_STAT_OFFSET_EPS_QUALIFIER_WERT (RXBUF_UCHAR(3))
|
|
#define I3_RES_DSC_STAT_OFFSET_EPS_QUALIFIER_WERT_TYPE unsigned char
|
|
// Setpoint qualifier for offset motor torque (2 = implement; 14 = do not implement) / Sollwert-Qualifier zum
|
|
// OffsetMotormoment (2 = umsetzen; 14 = nicht umsetzen)
|
|
|
|
#define I3_RES_DSC_STAT_FUNKTION_GMK_CODIERUNG_EIN (RXBUF_UCHAR(4))
|
|
#define I3_RES_DSC_STAT_FUNKTION_GMK_CODIERUNG_EIN_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_FUNKTION_GMK_CODIERUNG_EIN_TYPE unsigned char
|
|
// GMK function (1 = coded in; 0 = coded out) / GMK-Funktion (1 = eincodiert; 0 = auscodiert)
|
|
|
|
#define I3_RES_DSC_STAT_MMOTOR_OFFSET_GMK_EPS_WERT (RXBUF_SCHAR(5)/100.0f)
|
|
#define I3_RES_DSC_STAT_MMOTOR_OFFSET_GMK_EPS_WERT_UNIT 'Nm'
|
|
#define I3_RES_DSC_STAT_MMOTOR_OFFSET_GMK_EPS_WERT_TYPE float
|
|
// Offset engine torque that the EPS has to provide due to the GMK function / Offset-Motormoment, welches die EPS
|
|
// aufgrund der GMK Funktion zu stellen hat
|
|
|
|
#define I3_RES_DSC_STAT_LENKUNG_VERBAUT_FAHRZEUG_WERT (RXBUF_UCHAR(6))
|
|
#define I3_RES_DSC_STAT_LENKUNG_VERBAUT_FAHRZEUG_WERT_TYPE unsigned char
|
|
// Data record EPS without IAS (1..yes, 0..no) / Datensatz EPS ohne IAS (1..ja,0..nein)
|
|
|
|
#define I3_RES_DSC_STAT_EPS_FAKT_MOM_SERVICE_QUALIFIER_WERT (RXBUF_UCHAR(7))
|
|
#define I3_RES_DSC_STAT_EPS_FAKT_MOM_SERVICE_QUALIFIER_WERT_TYPE unsigned char
|
|
// Service qualifier of the EPS for the implementation of the factors and the offset motor torque (everything OK
|
|
// if 32 or 33) / Service-Qualifier der EPS für Umsetzung der Faktoren und des Offset-Motormoments (alles i.O
|
|
// wenn 32 od 33)
|
|
|
|
#define I3_RES_DSC_STAT_FUNKTION_GBR_KENNLINIE_NUMMER_WERT (RXBUF_UCHAR(8))
|
|
#define I3_RES_DSC_STAT_FUNKTION_GBR_KENNLINIE_NUMMER_WERT_TYPE unsigned char
|
|
// active GBR characteristic set / aktiver GBR Kennliniensatz
|
|
|
|
#define I3_PID_DSC_STATUS_BREMSPEDALWINKELSENSOR 0xD0D2
|
|
// Brake pedal travel sensor / Bremspedalwegsensor
|
|
|
|
#define I3_RES_DSC_STAT_WEG_IST_SENSOR1_WERT (RXBUF_SINT(0)/100.0f)
|
|
#define I3_RES_DSC_STAT_WEG_IST_SENSOR1_WERT_UNIT 'mm'
|
|
#define I3_RES_DSC_STAT_WEG_IST_SENSOR1_WERT_TYPE float
|
|
// Current pedal travel (based on WEG_NULLPUNKT_IST) / aktueller Pedalweg (bezogen auf WEG_NULLPUNKT_IST)
|
|
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_INIT_SENSOR1_WERT (RXBUF_SINT(2)/100.0f)
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_INIT_SENSOR1_WERT_UNIT 'mm'
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_INIT_SENSOR1_WERT_TYPE float
|
|
// Initialization of the pedal zero point / Initialisierung Pedal Nullpunkt
|
|
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_IST_SENSOR1_WERT (RXBUF_SINT(4)/100.0f)
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_IST_SENSOR1_WERT_UNIT 'mm'
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_IST_SENSOR1_WERT_TYPE float
|
|
// current pedal zero point / aktueller Pedal Nullpunkt
|
|
|
|
#define I3_RES_DSC_STAT_WEG_LEERWEG_IST_SENSOR1_WERT (RXBUF_SINT(6)/100.0f)
|
|
#define I3_RES_DSC_STAT_WEG_LEERWEG_IST_SENSOR1_WERT_UNIT 'mm'
|
|
#define I3_RES_DSC_STAT_WEG_LEERWEG_IST_SENSOR1_WERT_TYPE float
|
|
// Current pedal free travel (use of hydraulics based on WEG_NULLPUNKT_IST) / aktueller Pedal Leerweg (Einsatz
|
|
// Hydraulik bezogen auf WEG_NULLPUNKT_IST)
|
|
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_INIT_SENSOR2_WERT (RXBUF_SINT(8)/100.0f)
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_INIT_SENSOR2_WERT_UNIT 'mm'
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_INIT_SENSOR2_WERT_TYPE float
|
|
// Initialization of the pedal zero point / Initialisierung Pedal Nullpunkt
|
|
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_IST_SENSOR2_WERT (RXBUF_SINT(10)/100.0f)
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_IST_SENSOR2_WERT_UNIT 'mm'
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_IST_SENSOR2_WERT_TYPE float
|
|
// current pedal zero point / aktueller Pedal Nullpunkt
|
|
|
|
#define I3_RES_DSC_STAT_WEG_LEERWEG_IST_SENSOR2_WERT (RXBUF_SINT(12)/100.0f)
|
|
#define I3_RES_DSC_STAT_WEG_LEERWEG_IST_SENSOR2_WERT_UNIT 'mm'
|
|
#define I3_RES_DSC_STAT_WEG_LEERWEG_IST_SENSOR2_WERT_TYPE float
|
|
// Current pedal free travel (use of hydraulics based on WEG_NULLPUNKT_IST) / aktueller Pedal Leerweg (Einsatz
|
|
// Hydraulik bezogen auf WEG_NULLPUNKT_IST)
|
|
|
|
#define I3_PID_DSC_CBS_BREMSE_DETAILS 0xD272
|
|
// CBS data of the brakes / CBS-Daten der Bremsen
|
|
|
|
#define I3_RES_DSC_STAT_VA_IDENT_WERT (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_VA_IDENT_WERT_TYPE unsigned char
|
|
// Identification as VA -> value = 0x02 / Identifikation als VA -> Wert = 0x02
|
|
|
|
#define I3_RES_DSC_STAT_VA_S_SIGNAL_WERT (RXBUF_UINT(1)*100.0f)
|
|
#define I3_RES_DSC_STAT_VA_S_SIGNAL_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_VA_S_SIGNAL_WERT_TYPE float
|
|
// km reading with sensor signal / km-Stand bei Sensorsignal
|
|
|
|
#define I3_RES_DSC_STAT_VA_S_WECHSEL_WERT (RXBUF_UINT(3)*100.0f)
|
|
#define I3_RES_DSC_STAT_VA_S_WECHSEL_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_VA_S_WECHSEL_WERT_TYPE float
|
|
// Km reading at the last pad change / km-Stand bei letztem Belagwechsel
|
|
|
|
#define I3_RES_DSC_STAT_VA_S_REST_ORIG_WERT (RXBUF_UINT(5))
|
|
#define I3_RES_DSC_STAT_VA_S_REST_ORIG_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_VA_S_REST_ORIG_WERT_TYPE unsigned short
|
|
// Remaining distance without min- u. max restriction / Restlaufstrecke ohne min- u. max-Beschränkung
|
|
|
|
#define I3_RES_DSC_STAT_VA_S_MIN_WERT (RXBUF_UINT(7))
|
|
#define I3_RES_DSC_STAT_VA_S_MIN_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_VA_S_MIN_WERT_TYPE unsigned short
|
|
// minimum remaining distance / minimale Restlaufstrecke
|
|
|
|
#define I3_RES_DSC_STAT_VA_S_MAX_WERT (RXBUF_UINT(9))
|
|
#define I3_RES_DSC_STAT_VA_S_MAX_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_VA_S_MAX_WERT_TYPE unsigned short
|
|
// maximum remaining distance / maximale Restlaufstrecke
|
|
|
|
#define I3_RES_DSC_STAT_VA_S_REST_WERT (RXBUF_UINT32(11))
|
|
#define I3_RES_DSC_STAT_VA_S_REST_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_VA_S_REST_WERT_TYPE unsigned long
|
|
// Remaining distance / Restlaufstrecke
|
|
|
|
#define I3_RES_DSC_STAT_VA_S_GESAMT_1_WERT (RXBUF_UINT32(15))
|
|
#define I3_RES_DSC_STAT_VA_S_GESAMT_1_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_VA_S_GESAMT_1_WERT_TYPE unsigned long
|
|
// 1. Extrapolation of total running distance / 1. Hochrechnung Gesamtlaufstrecke
|
|
|
|
#define I3_RES_DSC_STAT_VA_S_GESAMT_2_WERT (RXBUF_UINT32(19))
|
|
#define I3_RES_DSC_STAT_VA_S_GESAMT_2_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_VA_S_GESAMT_2_WERT_TYPE unsigned long
|
|
// 2. Extrapolation of total running distance / 2. Hochrechnung Gesamtlaufstrecke
|
|
|
|
#define I3_RES_DSC_STAT_VA_S_GESAMT_3_WERT (RXBUF_UINT32(23))
|
|
#define I3_RES_DSC_STAT_VA_S_GESAMT_3_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_VA_S_GESAMT_3_WERT_TYPE unsigned long
|
|
// 3. Extrapolation of total running distance / 3. Hochrechnung Gesamtlaufstrecke
|
|
|
|
#define I3_RES_DSC_STAT_VA_SZ_WERT (RXBUF_UCHAR(27))
|
|
#define I3_RES_DSC_STAT_VA_SZ_WERT_TYPE unsigned char
|
|
// Service counter / Servicezähler
|
|
|
|
// BF_VA_FLAG_BVA is a BITFIELD of size unsigned char. We don't yet generate definitions for each bit, we treat as the host data type
|
|
// Bitfield state of the BVA sensor / Bitfield Zustand BVA-Sensor
|
|
// STAT_VA_FLAG_BVA: Mask: 0x01 - BVA sensor status: 0 = BVA sensor not looped through, 1 = BVA sensor looped through
|
|
#define I3_RES_DSC_BF_VA_FLAG_BVA (RXBUF_UCHAR(28))
|
|
#define I3_RES_DSC_BF_VA_FLAG_BVA_UNIT 'Bit'
|
|
#define I3_RES_DSC_BF_VA_FLAG_BVA_TYPE unsigned char
|
|
// Bitfield state of the BVA sensor / Bitfield Zustand BVA-Sensor
|
|
|
|
// BF_VA_RESET_VERHINDERER_1 is a BITFIELD of size unsigned char. We don't yet generate definitions for each bit, we treat as the host data type
|
|
// Bitfield reset prevention / Bitfield Resetverhinderer
|
|
// STAT_VA_DATUM_UHRZEIT_GUELTIG_BEI_RESET: Mask: 0x01 - Date_Uhrzeit_gueltig_bei_reset 1. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_VA_KM_STAND_GUELTIG_BEI_RESET: Mask: 0x02 - KM_Stand_gueltig_bei_reset 2nd reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_VA_VIN_GUELTIG_BEI_RESET: Mask: 0x04 - VIN_gueltig_bei_reset 3rd reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
#define I3_RES_DSC_BF_VA_RESET_VERHINDERER_1 (RXBUF_UCHAR(29))
|
|
#define I3_RES_DSC_BF_VA_RESET_VERHINDERER_1_UNIT 'Bit'
|
|
#define I3_RES_DSC_BF_VA_RESET_VERHINDERER_1_TYPE unsigned char
|
|
// Bitfield reset prevention / Bitfield Resetverhinderer
|
|
|
|
// BF_VA_RESET_VERHINDERER_2 is a BITFIELD of size unsigned char. We don't yet generate definitions for each bit, we treat as the host data type
|
|
// Bitfield reset prevention / Bitfield Resetverhinderer
|
|
// STAT_VA_BBV_SENSOR_NICHT_GEST_BEI_RESET: Mask: 0x01 - BBV_Sensor_nicht_angesteckt_bei_reset 4. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_VA_BBV_SENSOR_FEHLER_BEI_RESET: Mask: 0x02 - BBV_Sensor_Fehler_bei_reset 5. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_VA_VORDRUCK_BEI_RESET: Mask: 0x04 - Vordruck_bei_reset 6. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_VA_EMF_ANGEZ_BEI_RESET: Mask: 0x08 - EMF_ drawn_bei_reset 7. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_VA_KOMM_FEHLER_EMF_BEI_RESET: Mask: 0x10 - Communication error_mit_EMF_bei_reset 8. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_VA_GESCHW_BEI_RESET: Mask: 0x20 - Velocity_bei_reset 9. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_VA_AKTIVER_DRUCKAUFBAU_BEI_RESET: Mask: 0x40 - Aktiver_Druckbildung_bei_reset 10. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
#define I3_RES_DSC_BF_VA_RESET_VERHINDERER_2 (RXBUF_UCHAR(30))
|
|
#define I3_RES_DSC_BF_VA_RESET_VERHINDERER_2_UNIT 'Bit'
|
|
#define I3_RES_DSC_BF_VA_RESET_VERHINDERER_2_TYPE unsigned char
|
|
// Bitfield reset prevention / Bitfield Resetverhinderer
|
|
|
|
#define I3_RES_DSC_STAT_HA_IDENT_WERT (RXBUF_UCHAR(31))
|
|
#define I3_RES_DSC_STAT_HA_IDENT_WERT_TYPE unsigned char
|
|
// Identification as HA -> value = 0x06 / Identifikation als HA -> Wert = 0x06
|
|
|
|
#define I3_RES_DSC_STAT_HA_S_SIGNAL_WERT (RXBUF_UINT(32)*100.0f)
|
|
#define I3_RES_DSC_STAT_HA_S_SIGNAL_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_HA_S_SIGNAL_WERT_TYPE float
|
|
// km reading with sensor signal / km-Stand bei Sensorsignal
|
|
|
|
#define I3_RES_DSC_STAT_HA_S_WECHSEL_WERT (RXBUF_UINT(34)*100.0f)
|
|
#define I3_RES_DSC_STAT_HA_S_WECHSEL_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_HA_S_WECHSEL_WERT_TYPE float
|
|
// Km reading at the last pad change / km-Stand bei letztem Belagwechsel
|
|
|
|
#define I3_RES_DSC_STAT_HA_S_REST_ORIG_WERT (RXBUF_UINT(36))
|
|
#define I3_RES_DSC_STAT_HA_S_REST_ORIG_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_HA_S_REST_ORIG_WERT_TYPE unsigned short
|
|
// Remaining distance without min- u. max restriction / Restlaufstrecke ohne min- u. max-Beschränkung
|
|
|
|
#define I3_RES_DSC_STAT_HA_S_MIN_WERT (RXBUF_UINT(38))
|
|
#define I3_RES_DSC_STAT_HA_S_MIN_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_HA_S_MIN_WERT_TYPE unsigned short
|
|
// minimum remaining distance / minimale Restlaufstrecke
|
|
|
|
#define I3_RES_DSC_STAT_HA_S_MAX_WERT (RXBUF_UINT(40))
|
|
#define I3_RES_DSC_STAT_HA_S_MAX_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_HA_S_MAX_WERT_TYPE unsigned short
|
|
// maximum remaining distance / maximale Restlaufstrecke
|
|
|
|
#define I3_RES_DSC_STAT_HA_S_REST_WERT (RXBUF_UINT32(42))
|
|
#define I3_RES_DSC_STAT_HA_S_REST_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_HA_S_REST_WERT_TYPE unsigned long
|
|
// Remaining distance / Restlaufstrecke
|
|
|
|
#define I3_RES_DSC_STAT_HA_S_GESAMT_1_WERT (RXBUF_UINT32(46))
|
|
#define I3_RES_DSC_STAT_HA_S_GESAMT_1_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_HA_S_GESAMT_1_WERT_TYPE unsigned long
|
|
// 1. Extrapolation of total running distance / 1. Hochrechnung Gesamtlaufstrecke
|
|
|
|
#define I3_RES_DSC_STAT_HA_S_GESAMT_2_WERT (RXBUF_UINT32(50))
|
|
#define I3_RES_DSC_STAT_HA_S_GESAMT_2_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_HA_S_GESAMT_2_WERT_TYPE unsigned long
|
|
// 2. Extrapolation of total running distance / 2. Hochrechnung Gesamtlaufstrecke
|
|
|
|
#define I3_RES_DSC_STAT_HA_S_GESAMT_3_WERT (RXBUF_UINT32(54))
|
|
#define I3_RES_DSC_STAT_HA_S_GESAMT_3_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_HA_S_GESAMT_3_WERT_TYPE unsigned long
|
|
// 3. Extrapolation of total running distance / 3. Hochrechnung Gesamtlaufstrecke
|
|
|
|
#define I3_RES_DSC_STAT_HA_SZ_WERT (RXBUF_UCHAR(58))
|
|
#define I3_RES_DSC_STAT_HA_SZ_WERT_TYPE unsigned char
|
|
// Service counter / Servicezähler
|
|
|
|
// BF_HA_FLAG_BVA is a BITFIELD of size unsigned char. We don't yet generate definitions for each bit, we treat as the host data type
|
|
// Bitfield state of the BVA sensor / Bitfield Zustand BVA-Sensor
|
|
// STAT_HA_FLAG_BVA: Mask: 0x01 - BVA sensor status: 0 = BVA sensor not looped through, 1 = BVA sensor looped through
|
|
#define I3_RES_DSC_BF_HA_FLAG_BVA (RXBUF_UCHAR(59))
|
|
#define I3_RES_DSC_BF_HA_FLAG_BVA_UNIT 'Bit'
|
|
#define I3_RES_DSC_BF_HA_FLAG_BVA_TYPE unsigned char
|
|
// Bitfield state of the BVA sensor / Bitfield Zustand BVA-Sensor
|
|
|
|
// BF_HA_RESET_VERHINDERER_1 is a BITFIELD of size unsigned char. We don't yet generate definitions for each bit, we treat as the host data type
|
|
// Bitfield reset prevention / Bitfield Resetverhinderer
|
|
// STAT_HA_DATUM_UHRZEIT_GUELTIG_BEI_RESET: Mask: 0x01 - Date_Uhrzeit_gueltig_bei_reset 1. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_HA_KM_STAND_GUELTIG_BEI_RESET: Mask: 0x02 - KM_Stand_gueltig_bei_reset 2nd reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_HA_VIN_GUELTIG_BEI_RESET: Mask: 0x04 - VIN_gueltig_bei_reset 3rd reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
#define I3_RES_DSC_BF_HA_RESET_VERHINDERER_1 (RXBUF_UCHAR(60))
|
|
#define I3_RES_DSC_BF_HA_RESET_VERHINDERER_1_UNIT 'Bit'
|
|
#define I3_RES_DSC_BF_HA_RESET_VERHINDERER_1_TYPE unsigned char
|
|
// Bitfield reset prevention / Bitfield Resetverhinderer
|
|
|
|
// BF_HA_RESET_VERHINDERER_2 is a BITFIELD of size unsigned char. We don't yet generate definitions for each bit, we treat as the host data type
|
|
// Bitfield reset prevention / Bitfield Resetverhinderer
|
|
// STAT_HA_BBV_SENSOR_NICHT_GEST_BEI_RESET: Mask: 0x01 - BBV_Sensor_nicht_angesteckt_bei_reset 4. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_HA_BBV_SENSOR_FEHLER_BEI_RESET: Mask: 0x02 - BBV_Sensor_Fehler_bei_reset 5. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_HA_VORDRUCK_BEI_RESET: Mask: 0x04 - Vordruck_bei_reset 6. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_HA_EMF_ANGEZ_BEI_RESET: Mask: 0x08 - EMF_ drawn_bei_reset 7. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_HA_KOMM_FEHLER_EMF_BEI_RESET: Mask: 0x10 - Communication error_mit_EMF_bei_reset 8. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_HA_GESCHW_BEI_RESET: Mask: 0x20 - Velocity_bei_reset 9. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
// STAT_HA_AKTIVER_DRUCKAUFBAU_BEI_RESET: Mask: 0x40 - Aktiver_Druckbildung_bei_reset 10. Reset inhibitor: 0 = statement does not apply, 1 = statement applies
|
|
#define I3_RES_DSC_BF_HA_RESET_VERHINDERER_2 (RXBUF_UCHAR(61))
|
|
#define I3_RES_DSC_BF_HA_RESET_VERHINDERER_2_UNIT 'Bit'
|
|
#define I3_RES_DSC_BF_HA_RESET_VERHINDERER_2_TYPE unsigned char
|
|
// Bitfield reset prevention / Bitfield Resetverhinderer
|
|
|
|
#define I3_PID_DSC_FES_COORDINT_SW_FEHLER_INFO 0xD62E
|
|
// FES COORDINT SW error / FES COORDINT SW Fehler
|
|
|
|
#define I3_RES_DSC_STAT_FES_COORDINT_SW_FEHLER_INFO_WERT (RXBUF_SINT32(0))
|
|
#define I3_RES_DSC_STAT_FES_COORDINT_SW_FEHLER_INFO_WERT_TYPE long
|
|
// FES COORDINT SW error / FES COORDINT SW Fehler
|
|
|
|
#define I3_PID_DSC_FLM_LESEN 0xD6D6
|
|
// Field Load Manager (FLM) / Field Load Manager (FLM)
|
|
|
|
// Can't yet generate code for STAT_FLM_1_DATA of type data[200] at offset 0. But we account for the 200 bytes
|
|
// All FLM data part 1 / Alle FLM Daten Teil 1
|
|
|
|
// Can't yet generate code for STAT_FLM_2_DATA of type data[200] at offset 200. But we account for the 200 bytes
|
|
// All FLM data part 2 / Alle FLM Daten Teil 2
|
|
|
|
// Can't yet generate code for STAT_FLM_3_DATA of type data[200] at offset 400. But we account for the 200 bytes
|
|
// All FLM data part 3 / Alle FLM Daten Teil 3
|
|
|
|
// Can't yet generate code for STAT_FLM_4_DATA of type data[211] at offset 600. But we account for the 211 bytes
|
|
// All FLM data part 4 / Alle FLM Daten Teil 4
|
|
|
|
#define I3_PID_DSC_EMF_LERNDATEN_STATISTIK 0xD804
|
|
// Reading out learning data statistics / Auslesen Lerndaten Statistik
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_FESTELLEN_STEIGUNG20_WERT (RXBUF_UINT(0))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_FESTELLEN_STEIGUNG20_WERT_TYPE unsigned short
|
|
// Number of fixes slope> 20% / Anzahl Feststellen Steigung > 20 %
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_NACHSPANNEN_ROLLUEBERWACHUNG_WERT (RXBUF_UINT(2))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_NACHSPANNEN_ROLLUEBERWACHUNG_WERT_TYPE unsigned short
|
|
// Number of re-tensioning due to rollers recognized / Anzahl Nachspannen wegen Rollen erkannt
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_NACHSPANNEN_TEMPERATUR_WERT (RXBUF_UINT(4))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_NACHSPANNEN_TEMPERATUR_WERT_TYPE unsigned short
|
|
// Number of re-tensioning due to brake disc temperature / Anzahl Nachspannen wegen Temperatur Bremsscheibe
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_AUTO_ADJUST_WERT (RXBUF_UINT(6))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_AUTO_ADJUST_WERT_TYPE unsigned short
|
|
// Number of automatic adjustments / Anzahl automatische Justage
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_NACHSPANNEN_PRAEVENTIV_WERT (RXBUF_UINT(8))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_NACHSPANNEN_PRAEVENTIV_WERT_TYPE unsigned short
|
|
// Number of retightening as a preventive measure / Anzahl Nachspannen vorbeugend
|
|
|
|
#define I3_RES_DSC_STAT_RESERVE5_WERT (RXBUF_UINT(10))
|
|
#define I3_RES_DSC_STAT_RESERVE5_WERT_TYPE unsigned short
|
|
// unused / unbenutzt
|
|
|
|
#define I3_RES_DSC_STAT_RESERVE6_WERT (RXBUF_UINT(12))
|
|
#define I3_RES_DSC_STAT_RESERVE6_WERT_TYPE unsigned short
|
|
// unused / unbenutzt
|
|
|
|
#define I3_RES_DSC_STAT_RESERVE7_WERT (RXBUF_UINT(14))
|
|
#define I3_RES_DSC_STAT_RESERVE7_WERT_TYPE unsigned short
|
|
// unused / unbenutzt
|
|
|
|
#define I3_RES_DSC_STAT_RESERVE8_WERT (RXBUF_UINT(16))
|
|
#define I3_RES_DSC_STAT_RESERVE8_WERT_TYPE unsigned short
|
|
// unused / unbenutzt
|
|
|
|
#define I3_RES_DSC_STAT_RESERVE9_WERT (RXBUF_UINT(18))
|
|
#define I3_RES_DSC_STAT_RESERVE9_WERT_TYPE unsigned short
|
|
// unused / unbenutzt
|
|
|
|
#define I3_PID_DSC_EMF_AKTUATOR_KOMBISATTEL 0xD805
|
|
// Read out data from actuator / Auslesen Daten Aktuator
|
|
|
|
#define I3_RES_DSC_STAT_SPANNUNG_MOTOR_HL_WERT (RXBUF_SINT(0)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SPANNUNG_MOTOR_HL_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_SPANNUNG_MOTOR_HL_WERT_TYPE float
|
|
// Voltage rear left motor / Spannung Motor hinten links
|
|
|
|
#define I3_RES_DSC_STAT_STROM_MOTOR_HL_WERT (RXBUF_SINT(2)/1000.0f)
|
|
#define I3_RES_DSC_STAT_STROM_MOTOR_HL_WERT_UNIT 'A'
|
|
#define I3_RES_DSC_STAT_STROM_MOTOR_HL_WERT_TYPE float
|
|
// Electricity motor rear left / Strom Motor hinten links
|
|
|
|
#define I3_RES_DSC_STAT_TEMPERATUR_MOTOR_HL_WERT (RXBUF_SINT(4)/10.0f)
|
|
#define I3_RES_DSC_STAT_TEMPERATUR_MOTOR_HL_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_TEMPERATUR_MOTOR_HL_WERT_TYPE float
|
|
// Engine temperature, rear left / Temperatur Motor hinten links
|
|
|
|
#define I3_RES_DSC_STAT_SPANNUNG_MOTOR_HR_WERT (RXBUF_SINT(6)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SPANNUNG_MOTOR_HR_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_SPANNUNG_MOTOR_HR_WERT_TYPE float
|
|
// Voltage motor rear right / Spannung Motor hinten rechts
|
|
|
|
#define I3_RES_DSC_STAT_STROM_MOTOR_HR_WERT (RXBUF_SINT(8)/1000.0f)
|
|
#define I3_RES_DSC_STAT_STROM_MOTOR_HR_WERT_UNIT 'A'
|
|
#define I3_RES_DSC_STAT_STROM_MOTOR_HR_WERT_TYPE float
|
|
// Electricity motor rear right / Strom Motor hinten rechts
|
|
|
|
#define I3_RES_DSC_STAT_TEMPERATUR_MOTOR_HR_WERT (RXBUF_SINT(10)/10.0f)
|
|
#define I3_RES_DSC_STAT_TEMPERATUR_MOTOR_HR_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_TEMPERATUR_MOTOR_HR_WERT_TYPE float
|
|
// Temperature engine rear right / Temperatur Motor hinten rechts
|
|
|
|
#define I3_RES_DSC_STAT_AKTUATOR_R (RXBUF_UCHAR(12))
|
|
#define I3_RES_DSC_STAT_AKTUATOR_R_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_AKTUATOR_R_TYPE unsigned char
|
|
// Rear right brake shoes position / Position Bremsbacken hinten rechts
|
|
|
|
#define I3_RES_DSC_STAT_AKTUATOR_L (RXBUF_UCHAR(13))
|
|
#define I3_RES_DSC_STAT_AKTUATOR_L_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_AKTUATOR_L_TYPE unsigned char
|
|
// Rear right brake shoes position / Position Bremsbacken hinten rechts
|
|
|
|
#define I3_RES_DSC_STAT_HU_MODE_STATUS (RXBUF_UCHAR(14))
|
|
#define I3_RES_DSC_STAT_HU_MODE_STATUS_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_HU_MODE_STATUS_TYPE unsigned char
|
|
// Status mode general inspection / Status Modus Hauptuntersuchung
|
|
|
|
#define I3_PID_DSC_EMF_LERNDATEN_TASTER 0xD808
|
|
// Read out learning data button / Auslesen Lerndaten Taster
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_TASTER_FESTSTELLEN_WERT (RXBUF_UINT32(0))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_TASTER_FESTSTELLEN_WERT_TYPE unsigned long
|
|
// Determine number of operations / Anzahl Bedienung Feststellen
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_TASTER_LOESEN_WERT (RXBUF_UINT32(4))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_TASTER_LOESEN_WERT_TYPE unsigned long
|
|
// Solve number of operations / Anzahl Bedienungen Lösen
|
|
|
|
#define I3_PID_DSC_EMF_LERNDATEN_AKTUATOR 0xD80A
|
|
// Read out actuator learning data / Auslesen Lerndaten Aktuator
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_AKTUATOR_FESTSTELLEN_WERT (RXBUF_UINT32(0))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_AKTUATOR_FESTSTELLEN_WERT_TYPE unsigned long
|
|
// Number of notices / Anzahl Feststellen
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_AKTUATOR_NOTENTRIEGELN_WERT (RXBUF_UINT(4))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_AKTUATOR_NOTENTRIEGELN_WERT_TYPE unsigned short
|
|
// Number of emergency releases / Anzahl Notentriegelung
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_AKTUATOR_BOOST_WERT (RXBUF_UINT(6))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_AKTUATOR_BOOST_WERT_TYPE unsigned short
|
|
// Number of readjustments / Anzahl Nachstellen
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_AKTUATOR_UEBERLAST_WERT (RXBUF_UINT(8))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_AKTUATOR_UEBERLAST_WERT_TYPE unsigned short
|
|
// Number of overloads / Anzahl Überlast
|
|
|
|
#define I3_PID_DSC_EMF_KLEMMEN_KOMBISATTEL 0xD80C
|
|
// Read out voltage control unit / Auslesen Spannung Steuergerät
|
|
|
|
#define I3_RES_DSC_STAT_SPANNUNG_ELEKTRONIK_WERT (RXBUF_UINT(0)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SPANNUNG_ELEKTRONIK_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_SPANNUNG_ELEKTRONIK_WERT_TYPE float
|
|
// Voltage control unit / Spannung Steuergerät
|
|
|
|
#define I3_RES_DSC_STAT_SPANNUNG_AKUATOR_HL_WERT (RXBUF_UINT(2)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SPANNUNG_AKUATOR_HL_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_SPANNUNG_AKUATOR_HL_WERT_TYPE float
|
|
// Voltage actuator rear left / Spannung Aktuator hinten links
|
|
|
|
#define I3_RES_DSC_STAT_SPANNUNG_AKUATOR_HR_WERT (RXBUF_UINT(4)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SPANNUNG_AKUATOR_HR_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_SPANNUNG_AKUATOR_HR_WERT_TYPE float
|
|
// Voltage actuator rear right / Spannung Aktuator hinten rechts
|
|
|
|
#define I3_RES_DSC_STAT_SPANNUNG_WECKLEITUNG_WERT (RXBUF_UINT(6)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SPANNUNG_WECKLEITUNG_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_SPANNUNG_WECKLEITUNG_WERT_TYPE float
|
|
// Voltage wake-up line / Spannung Weckleitung
|
|
|
|
#define I3_PID_DSC_EMF_TASTER 0xD80D
|
|
// Read out button / Auslesen Taster
|
|
|
|
#define I3_RES_DSC_STAT_TASTER_EMF (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_TYPE unsigned char
|
|
// Operating status / Bedienzustand
|
|
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_DIGITAL_WERT (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_DIGITAL_WERT_TYPE unsigned char
|
|
// digital status button / digitaler Status Taster
|
|
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_1_WERT (RXBUF_UINT(2)/1000.0f)
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_1_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_1_WERT_TYPE float
|
|
// Voltage button line 1 / Spannung Taster Leitung 1
|
|
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_2_WERT (RXBUF_UINT(4)/1000.0f)
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_2_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_2_WERT_TYPE float
|
|
// Voltage button line 2 / Spannung Taster Leitung 2
|
|
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_3_WERT (RXBUF_UINT(6)/1000.0f)
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_3_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_3_WERT_TYPE float
|
|
// Voltage button line 3 / Spannung Taster Leitung 3
|
|
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_4_WERT (RXBUF_UINT(8)/1000.0f)
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_4_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_4_WERT_TYPE float
|
|
// Voltage button line 4 / Spannung Taster Leitung 4
|
|
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_5_WERT (RXBUF_UINT(10)/1000.0f)
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_5_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_TASTER_EMF_5_WERT_TYPE float
|
|
// Voltage button line 5 / Spannung Taster Leitung 5
|
|
|
|
// Skipping EMF_MONTAGE_MODE on 0xD80F which takes arguments
|
|
|
|
#define I3_PID_DSC_EXTERNE_ANFORDERUNG_GKU_IPB_ZAEHLER_LESEN 0xD81A
|
|
// Returns the number of IPB takeovers through external transmission requests / Gibt Anzahl der IPB-Uebernahmen
|
|
// durch externe Getriebe-Anforderungen zurueck
|
|
|
|
#define I3_RES_DSC_STAT_AKTUELLER_ZAEHLERSTAND_GKU_WERT (RXBUF_UINT(0))
|
|
#define I3_RES_DSC_STAT_AKTUELLER_ZAEHLERSTAND_GKU_WERT_TYPE unsigned short
|
|
// Returns the number of IPB takeovers through external transmission requests / Gibt Anzahl der IPB-Uebernahmen
|
|
// durch externe Getriebe-Anforderungen zurueck
|
|
|
|
#define I3_PID_DSC_STATUS_LESEN_ANTI_POWER_HOP_FUNKTION_ZAEHLER_LESEN 0xD8EB
|
|
// Indicates how often the anti-power HOP function was active. / Gibt an, wie oft die Anti-Power-HOP-Funktion
|
|
// aktiv war.
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_ANTI_POWER_HOP_FUNKTION_WERT (RXBUF_UINT(0))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_ANTI_POWER_HOP_FUNKTION_WERT_TYPE unsigned short
|
|
// Indicates how often the anti-power HOP function was active. / Gibt an, wie oft die Anti-Power-HOP-Funktion
|
|
// aktiv war.
|
|
|
|
#define I3_PID_DSC_STATUS_MODUS_ROLLENPRUEFSTAND 0xDB5B
|
|
// Status query role mode active in the ICM / Statusabfrage Rollenmodus aktiv im ICM
|
|
|
|
#define I3_RES_DSC_STAT_ROLLENMODUS_NR (RXBUF_SCHAR(0))
|
|
#define I3_RES_DSC_STAT_ROLLENMODUS_NR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ROLLENMODUS_NR_TYPE char
|
|
// Status query role mode active in the ICM / Statusabfrage Rollenmodus aktiv im ICM
|
|
|
|
// Skipping STEUERN_MODUS_ROLLENPRUEFSTAND on 0xDB98 which takes arguments
|
|
|
|
#define I3_PID_DSC_STATUS_GIERRATE 0xDBD9
|
|
// Reading out yaw rate / Auslesen Gierrate
|
|
|
|
// Can't process STAT_GIERRATE_SENSOR_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
#define I3_RES_DSC_STAT_GIERRATE_SENSOR_NR (RXBUF_UINT(0))
|
|
#define I3_RES_DSC_STAT_GIERRATE_SENSOR_NR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_GIERRATE_SENSOR_NR_TYPE unsigned short
|
|
// Plausibility check sensor / Plausibilisierung Sensor
|
|
|
|
#define I3_PID_DSC_STATUS_QUERBESCHLEUNIGUNG 0xDBDA
|
|
// Read out lateral acceleration / Auslesen Querbeschleunigung
|
|
|
|
// Can't process STAT_QUERBESCHLEUNIGUNG_SENSOR_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
#define I3_RES_DSC_STAT_QUERBESCHLEUNIGUNG_SENSOR_NR (RXBUF_UINT(0))
|
|
#define I3_RES_DSC_STAT_QUERBESCHLEUNIGUNG_SENSOR_NR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_QUERBESCHLEUNIGUNG_SENSOR_NR_TYPE unsigned short
|
|
// Plausibility check sensor / Plausibilisierung Sensor
|
|
|
|
#define I3_PID_DSC_STATUS_LAENGSBESCHLEUNIGUNG 0xDBDB
|
|
// Read out longitudinal acceleration / Auslesen Laengsbeschleunigung
|
|
|
|
// Can't process STAT_LAENGSBESCHLEUNIGUNG_SENSOR1_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
#define I3_RES_DSC_STAT_LAENGSBESCHLEUNIGUNG_SENSOR1_NR (RXBUF_UINT(0))
|
|
#define I3_RES_DSC_STAT_LAENGSBESCHLEUNIGUNG_SENSOR1_NR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_LAENGSBESCHLEUNIGUNG_SENSOR1_NR_TYPE unsigned short
|
|
// Plausibility check sensor 1 / Plausibilisierung Sensor 1
|
|
|
|
#define I3_PID_DSC_BREMSBELAGSSENSOR 0xDBDF
|
|
// Reading out the brake lining sensor / Auslesen Bremsbelagssensor
|
|
|
|
#define I3_RES_DSC_STAT_PILLE_VA (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_PILLE_VA_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_PILLE_VA_TYPE unsigned char
|
|
// Brake pad pill front axle / Bremsbelagspille Vorderachse
|
|
|
|
#define I3_RES_DSC_STAT_PILLE_HA (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_PILLE_HA_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_PILLE_HA_TYPE unsigned char
|
|
// Brake pad pill rear axle / Bremsbelagspille Hinterachse
|
|
|
|
// Skipping LMV_FUNKTION on 0xDBE1 which takes arguments
|
|
|
|
// Skipping REKU_FUNKTION on 0xDBE2 which takes arguments
|
|
|
|
#define I3_PID_DSC_REIFENPANNENANZEIGE 0xDBE3
|
|
// Flat tire indicator / Reifenpannenanzeige
|
|
|
|
#define I3_RES_DSC_STAT_WARNUNG_AKTIV (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_WARNUNG_AKTIV_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_WARNUNG_AKTIV_TYPE unsigned char
|
|
// Warning (0 = inactive; 1 = active) / Warnung (0= inaktiv; 1= aktiv)
|
|
|
|
#define I3_RES_DSC_STAT_FUNKTION_AKTIV (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_FUNKTION_AKTIV_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_FUNKTION_AKTIV_TYPE unsigned char
|
|
// RPA system (0 = inactive; 1 = active) / RPA-System (0= inaktiv; 1= aktiv)
|
|
|
|
#define I3_RES_DSC_STAT_PLATTROLLEN_ERKANNT (RXBUF_UCHAR(2))
|
|
#define I3_RES_DSC_STAT_PLATTROLLEN_ERKANNT_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_PLATTROLLEN_ERKANNT_TYPE unsigned char
|
|
// Flat tire (0 = not recognized; 1 = recognized) / Platte Reifen (0= nicht erkannt; 1= erkannt)
|
|
|
|
#define I3_RES_DSC_STAT_3PLUS1_ERKANNT (RXBUF_UCHAR(3))
|
|
#define I3_RES_DSC_STAT_3PLUS1_ERKANNT_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_3PLUS1_ERKANNT_TYPE unsigned char
|
|
// 3Plus1 constellation (0 = not recognized; 1 = recognized) / 3Plus1 Konstellation (0= nicht erkannt; 1=
|
|
// erkannt)
|
|
|
|
#define I3_RES_DSC_STAT_NEUREIFEN_ERKANNT (RXBUF_UCHAR(4))
|
|
#define I3_RES_DSC_STAT_NEUREIFEN_ERKANNT_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_NEUREIFEN_ERKANNT_TYPE unsigned char
|
|
// New tire constellation (0 = not recognized; 1 = recognized) / Neureifen Konstellation (0= nicht erkannt; 1=
|
|
// erkannt)
|
|
|
|
#define I3_RES_DSC_STAT_NAEHERUNG_WARNGRENZE_WERT (RXBUF_UCHAR(5))
|
|
#define I3_RES_DSC_STAT_NAEHERUNG_WARNGRENZE_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_NAEHERUNG_WARNGRENZE_WERT_TYPE unsigned char
|
|
// Current value approaching warning limit / aktueller Wert Näherung Warngrenze
|
|
|
|
#define I3_RES_DSC_STAT_PANNEN_POSITION (RXBUF_UCHAR(6))
|
|
#define I3_RES_DSC_STAT_PANNEN_POSITION_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_PANNEN_POSITION_TYPE unsigned char
|
|
// Pressure reduced wheel position / Position druckreduziertes Rad
|
|
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_0_100_WERT (RXBUF_UCHAR(7))
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_0_100_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_0_100_WERT_TYPE unsigned char
|
|
// Learning progress speed range 0..100 km / h / Lernfortschritt Geschwindigkeitsbereich 0..100 km/h
|
|
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_100_190_WERT (RXBUF_UCHAR(8))
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_100_190_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_100_190_WERT_TYPE unsigned char
|
|
// Learning progress speed range 100..190 km / h / Lernfortschritt Geschwindigkeitsbereich 100..190 km/h
|
|
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_UEBER_190_WERT (RXBUF_UCHAR(9))
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_UEBER_190_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_UEBER_190_WERT_TYPE unsigned char
|
|
// Learning progress speed range> 190 km / h / Lernfortschritt Geschwindigkeitsbereich > 190 km/h
|
|
|
|
#define I3_PID_DSC_GESCHWINDIGKEIT_RAD 0xDBE4
|
|
// Read out wheel speed sensor / Auslesen Raddrehzahlfühler
|
|
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_RAD_VL_WERT (RXBUF_SINT(0)/100.0f)
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_RAD_VL_WERT_UNIT 'km/h'
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_RAD_VL_WERT_TYPE float
|
|
// Front left wheel speed / Radgeschwindigkeit vorne links
|
|
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_RAD_VR_WERT (RXBUF_SINT(2)/100.0f)
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_RAD_VR_WERT_UNIT 'km/h'
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_RAD_VR_WERT_TYPE float
|
|
// Front right wheel speed / Radgeschwindigkeit vorne rechts
|
|
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_RAD_HL_WERT (RXBUF_SINT(4)/100.0f)
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_RAD_HL_WERT_UNIT 'km/h'
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_RAD_HL_WERT_TYPE float
|
|
// Rear left wheel speed / Radgeschwindigkeit hinten links
|
|
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_RAD_HR_WERT (RXBUF_SINT(6)/100.0f)
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_RAD_HR_WERT_UNIT 'km/h'
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_RAD_HR_WERT_TYPE float
|
|
// Rear right wheel speed / Radgeschwindigkeit hinten rechts
|
|
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_FZG_WERT (RXBUF_SINT(8)/100.0f)
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_FZG_WERT_UNIT 'km/h'
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_FZG_WERT_TYPE float
|
|
// Vehicle speed / Fahrzeuggeschwindigkeit
|
|
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_VL (RXBUF_UCHAR(10))
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_VL_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_VL_TYPE unsigned char
|
|
// Wheel rotation direction front left / Raddrehrichtung vorne links
|
|
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_VR (RXBUF_UCHAR(11))
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_VR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_VR_TYPE unsigned char
|
|
// Direction of wheel rotation front right / Raddrehrichtung vorne rechts
|
|
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_HL (RXBUF_UCHAR(12))
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_HL_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_HL_TYPE unsigned char
|
|
// Wheel rotation direction rear left / Raddrehrichtung hinten links
|
|
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_HR (RXBUF_UCHAR(13))
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_HR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_HR_TYPE unsigned char
|
|
// Wheel rotation direction rear right / Raddrehrichtung hinten rechts
|
|
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_REF (RXBUF_UCHAR(14))
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_REF_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_REF_TYPE unsigned char
|
|
// Direction of travel / Fahrrichtung
|
|
|
|
#define I3_RES_DSC_STAT_SIGNALQUALITAET_VL_WERT (RXBUF_UCHAR(15))
|
|
#define I3_RES_DSC_STAT_SIGNALQUALITAET_VL_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_SIGNALQUALITAET_VL_WERT_TYPE unsigned char
|
|
// Signal quality front left x <10% = no signal; 10% <= x <= 50% weak signal; x> 50% signal OK /
|
|
// Signalqualität vorne links x < 10 % = kein Signal; 10 % <= x <= 50 % schwaches Signal; x > 50 % Signal in
|
|
// Ordnung
|
|
|
|
#define I3_RES_DSC_STAT_SIGNALQUALITAET_VR_WERT (RXBUF_UCHAR(16))
|
|
#define I3_RES_DSC_STAT_SIGNALQUALITAET_VR_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_SIGNALQUALITAET_VR_WERT_TYPE unsigned char
|
|
// Signal quality front right x <10% = no signal; 10% <= x <= 50% weak signal; x> 50% signal OK /
|
|
// Signalqualität vorne rechts x < 10 % = kein Signal; 10 % <= x <= 50 % schwaches Signal; x > 50 % Signal in
|
|
// Ordnung
|
|
|
|
#define I3_RES_DSC_STAT_SIGNALQUALITAET_HL_WERT (RXBUF_UCHAR(17))
|
|
#define I3_RES_DSC_STAT_SIGNALQUALITAET_HL_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_SIGNALQUALITAET_HL_WERT_TYPE unsigned char
|
|
// Signal quality rear left x <10% = no signal; 10% <= x <= 50% weak signal; x> 50% signal OK /
|
|
// Signalqualität hinten links x < 10 % = kein Signal; 10 % <= x <= 50 % schwaches Signal; x > 50 % Signal in
|
|
// Ordnung
|
|
|
|
#define I3_RES_DSC_STAT_SIGNALQUALITAET_HR_WERT (RXBUF_UCHAR(18))
|
|
#define I3_RES_DSC_STAT_SIGNALQUALITAET_HR_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_SIGNALQUALITAET_HR_WERT_TYPE unsigned char
|
|
// Signal quality rear right x <10% = no signal; 10% <= x <= 50% weak signal; x> 50% signal OK /
|
|
// Signalqualität hinten rechts x < 10 % = kein Signal; 10 % <= x <= 50 % schwaches Signal; x > 50 % Signal in
|
|
// Ordnung
|
|
|
|
#define I3_PID_DSC_DSC_DRUCKSENSOREN 0xDBE5
|
|
// Reading out pressure sensors / Auslesen Drucksensoren
|
|
|
|
#define I3_RES_DSC_STAT_DRUCK_KREIS1_WERT (RXBUF_SINT(0)/10.0f)
|
|
#define I3_RES_DSC_STAT_DRUCK_KREIS1_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_DRUCK_KREIS1_WERT_TYPE float
|
|
// Pressure circuit 1 LG, 35up, LG-X: brake pressure; LU / LI: brake pressure (THZ tandem master brake cylinder)
|
|
// / Druck Kreis 1 LG, 35up, LG-X: Bremsvordruck; LU/LI: Bremsvordruck (THZ-Tandem-Hauptbremszylinder)
|
|
|
|
#define I3_RES_DSC_STAT_DRUCK_KREIS2_WERT (RXBUF_SINT(2)/10.0f)
|
|
#define I3_RES_DSC_STAT_DRUCK_KREIS2_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_DRUCK_KREIS2_WERT_TYPE float
|
|
// Pressure circle 2 / Druck Kreis 2
|
|
|
|
#define I3_RES_DSC_STAT_DRUCK_VL_WERT (RXBUF_SINT(4)/10.0f)
|
|
#define I3_RES_DSC_STAT_DRUCK_VL_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_DRUCK_VL_WERT_TYPE float
|
|
// Print front left LG, 35up, LG-X: Kreis1 (VA); I12 / F4xPHEV circle 1 (VL / HR); UKL / I01 not used / Druck
|
|
// vorne links LG, 35up, LG-X: Kreis1 (VA); I12/F4xPHEV Kreis1 (VL/HR); UKL/I01 unbelegt
|
|
|
|
#define I3_RES_DSC_STAT_DRUCK_VR_WERT (RXBUF_SINT(6)/10.0f)
|
|
#define I3_RES_DSC_STAT_DRUCK_VR_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_DRUCK_VR_WERT_TYPE float
|
|
// Print front right LG, 35up, LG-X, LU / LI: unoccupied / Druck vorne rechts LG, 35up, LG-X, LU/LI: unbelegt
|
|
|
|
#define I3_RES_DSC_STAT_DRUCK_HL_WERT (RXBUF_SINT(8)/10.0f)
|
|
#define I3_RES_DSC_STAT_DRUCK_HL_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_DRUCK_HL_WERT_TYPE float
|
|
// Print back left LG, 35up, LG-X: Kreis2 (HA); I12 / F4xPHEV circle 2 (VR / HL); UKL / I01 not used / Druck
|
|
// hinten links LG, 35up, LG-X: Kreis2 (HA); I12/F4xPHEV Kreis2 (VR/HL); UKL/I01 unbelegt
|
|
|
|
#define I3_RES_DSC_STAT_DRUCK_HR_WERT (RXBUF_SINT(10)/10.0f)
|
|
#define I3_RES_DSC_STAT_DRUCK_HR_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_DRUCK_HR_WERT_TYPE float
|
|
// Print back right LG, 35up, LG-X, LU / LI: unoccupied / Druck hinten rechts LG, 35up, LG-X, LU/LI: unbelegt
|
|
|
|
#define I3_PID_DSC_DSC_KLEMMEN 0xDBE7
|
|
// Read out voltage control unit / Auslesen Spannung Steuergerät
|
|
|
|
#define I3_RES_DSC_STAT_SPANNUNG_ELEKTRONIK_WERT_0XDBE7 (RXBUF_UINT(0)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SPANNUNG_ELEKTRONIK_WERT_0XDBE7_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_SPANNUNG_ELEKTRONIK_WERT_0XDBE7_TYPE float
|
|
// Electronics supply voltage / Spannung Elektronikversorgung
|
|
|
|
#define I3_RES_DSC_STAT_SPANNUNG_PUMPE_WERT (RXBUF_UINT(2)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SPANNUNG_PUMPE_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_SPANNUNG_PUMPE_WERT_TYPE float
|
|
// Pump supply voltage / Spannung Pumpenversorgung
|
|
|
|
#define I3_RES_DSC_STAT_SPANNUNG_VENTILE_WERT (RXBUF_UINT(4)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SPANNUNG_VENTILE_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_SPANNUNG_VENTILE_WERT_TYPE float
|
|
// Voltage valve supply / Spannung Ventilversorgung
|
|
|
|
#define I3_RES_DSC_STAT_SPANNUNG_WECKLEITUNG_WERT_0XDBE7 (RXBUF_UINT(6)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SPANNUNG_WECKLEITUNG_WERT_0XDBE7_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_SPANNUNG_WECKLEITUNG_WERT_0XDBE7_TYPE float
|
|
// Voltage wake-up line / Spannung Weckleitung
|
|
|
|
// Skipping DSC_PUMPE on 0xDBE8 which takes arguments
|
|
|
|
// Skipping DSC_VENTILE on 0xDBE9 which takes arguments
|
|
|
|
#define I3_PID_DSC_VAKUUMSENSOR 0xDBF4
|
|
// Read out vacuum sensor / Auslesen Vakuumsensor
|
|
|
|
#define I3_RES_DSC_STAT_DRUCK_IST_WERT (RXBUF_SINT(0)/1000.0f)
|
|
#define I3_RES_DSC_STAT_DRUCK_IST_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_DRUCK_IST_WERT_TYPE float
|
|
// current pressure / aktueller Druck
|
|
|
|
#define I3_RES_DSC_STAT_SPANNUNG_IST_WERT (RXBUF_UINT(2)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SPANNUNG_IST_WERT_UNIT 'V'
|
|
#define I3_RES_DSC_STAT_SPANNUNG_IST_WERT_TYPE float
|
|
// current voltage / aktuelle Spannung
|
|
|
|
#define I3_PID_DSC_BREMSPEDALWEGSENSOR 0xDBF5
|
|
// Reading out brake pedal travel sensor / Auslesen Bremspedalwegsensor
|
|
|
|
#define I3_RES_DSC_STAT_WEG_IST_WERT (RXBUF_SINT(0)/100.0f)
|
|
#define I3_RES_DSC_STAT_WEG_IST_WERT_UNIT 'mm'
|
|
#define I3_RES_DSC_STAT_WEG_IST_WERT_TYPE float
|
|
// Current pedal travel (based on WEG_NULLPUNKT_IST) / aktueller Pedalweg (bezogen auf WEG_NULLPUNKT_IST)
|
|
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_INIT_WERT (RXBUF_SINT(2)/100.0f)
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_INIT_WERT_UNIT 'mm'
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_INIT_WERT_TYPE float
|
|
// Initialization of the pedal zero point / Initialisierung Pedal Nullpunkt
|
|
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_IST_WERT (RXBUF_SINT(4)/100.0f)
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_IST_WERT_UNIT 'mm'
|
|
#define I3_RES_DSC_STAT_WEG_NULLPUNKT_IST_WERT_TYPE float
|
|
// current pedal zero point / aktueller Pedal Nullpunkt
|
|
|
|
#define I3_RES_DSC_STAT_WEG_LEERWEG_IST_WERT (RXBUF_SINT(6)/100.0f)
|
|
#define I3_RES_DSC_STAT_WEG_LEERWEG_IST_WERT_UNIT 'mm'
|
|
#define I3_RES_DSC_STAT_WEG_LEERWEG_IST_WERT_TYPE float
|
|
// Current pedal free travel (use of hydraulics based on WEG_NULLPUNKT_IST) / aktueller Pedal Leerweg (Einsatz
|
|
// Hydraulik bezogen auf WEG_NULLPUNKT_IST)
|
|
|
|
#define I3_PID_DSC_BREMSREKUPERATIONSMOMENT 0xDBF6
|
|
// Read out wheel torque brake recuperation / Auslesen Radmoment Bremsrekuperation
|
|
|
|
#define I3_RES_DSC_STAT_MOMENT_SOLL_WERT (RXBUF_SINT(0))
|
|
#define I3_RES_DSC_STAT_MOMENT_SOLL_WERT_UNIT 'Nm'
|
|
#define I3_RES_DSC_STAT_MOMENT_SOLL_WERT_TYPE short
|
|
// Brake regeneration setpoint / Sollwert Bremsrekuperation
|
|
|
|
#define I3_RES_DSC_STAT_MOMENT_IST_WERT (RXBUF_SINT(2))
|
|
#define I3_RES_DSC_STAT_MOMENT_IST_WERT_UNIT 'Nm'
|
|
#define I3_RES_DSC_STAT_MOMENT_IST_WERT_TYPE short
|
|
// Actual value of brake regeneration / Istwert Bremsrekuperation
|
|
|
|
#define I3_PID_DSC_STATUS_ADAPTIVDATEN_ZUSTAND 0xDC13
|
|
// Read out status of adaptive data / Auslesen Status Adaptivdaten
|
|
|
|
// Can't yet generate code for STAT_ADAPTIVDATEN_RUECKSETZEN_AJ_DATA of type data[2] at offset 0. But we account for the 2 bytes
|
|
// Adaptive data basic setting set / Adaptivdaten Grundeinstellung gesetzt
|
|
|
|
#define I3_RES_DSC_STAT_ADAPTIVDATEN_RUECKSETZEN_NR (RXBUF_SINT(2))
|
|
#define I3_RES_DSC_STAT_ADAPTIVDATEN_RUECKSETZEN_NR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ADAPTIVDATEN_RUECKSETZEN_NR_TYPE short
|
|
// Adaptive data basic setting set / Adaptivdaten Grundeinstellung gesetzt
|
|
|
|
// Can't yet generate code for STAT_AX_AY_ABGLEICH_AJ_DATA of type data[1] at offset 4. But we account for the 1 bytes
|
|
// Accelerometers are compared / Ablgeich Beschleunigungssensoren erfolgt
|
|
|
|
#define I3_RES_DSC_STAT_AX_AY_ABGLEICH_NR (RXBUF_SCHAR(5))
|
|
#define I3_RES_DSC_STAT_AX_AY_ABGLEICH_NR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_AX_AY_ABGLEICH_NR_TYPE char
|
|
// Accelerometers are compared / Ablgeich Beschleunigungssensoren erfolgt
|
|
|
|
// Can't yet generate code for STAT_ADAPTIVDATEN_WERKSMODUS_AJ_DATA of type data[2] at offset 6. But we account for the 2 bytes
|
|
// Adaptive data factory setting set / Adaptivdaten Werkseinstellung gesetzt
|
|
|
|
#define I3_RES_DSC_STAT_ADAPTIVDATEN_WERKSMODUS_NR (RXBUF_SCHAR(8))
|
|
#define I3_RES_DSC_STAT_ADAPTIVDATEN_WERKSMODUS_NR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ADAPTIVDATEN_WERKSMODUS_NR_TYPE char
|
|
// Adaptive data factory setting set / Adaptivdaten Werkseinstellung gesetzt
|
|
|
|
// Can't yet generate code for STAT_ADAPTIVDATEN_LERNWERTE_AKTIV_AJ_DATA of type data[1] at offset 9. But we account for the 1 bytes
|
|
// Adaptive data in the learning area / Adaptivdaten im Lernbereich
|
|
|
|
#define I3_RES_DSC_STAT_ADAPTIVDATEN_LERNWERTE_AKTIV_NR (RXBUF_SCHAR(10))
|
|
#define I3_RES_DSC_STAT_ADAPTIVDATEN_LERNWERTE_AKTIV_NR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ADAPTIVDATEN_LERNWERTE_AKTIV_NR_TYPE char
|
|
// Adaptive data in the learning area / Adaptivdaten im Lernbereich
|
|
|
|
#define I3_PID_DSC_RPA_LERNDATEN_STATISTIK 0xDC14
|
|
// Reading out learning data statistics / Auslesen Lerndaten Statisik
|
|
|
|
#define I3_RES_DSC_STAT_RPA_VERSION_NR_1_WERT (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_RPA_VERSION_NR_1_WERT_TYPE unsigned char
|
|
// Major version number of RPA software / Hauptversionsnummer RPA-Software
|
|
|
|
#define I3_RES_DSC_STAT_RPA_VERSION_NR_2_WERT (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_RPA_VERSION_NR_2_WERT_TYPE unsigned char
|
|
// Min version number of RPA software / Unterversionsnummer RPA-Software
|
|
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_STANDARDISIERUNG_WERT (RXBUF_UINT32(2))
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_STANDARDISIERUNG_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_STANDARDISIERUNG_WERT_TYPE unsigned long
|
|
// Mileage last initialization / Kilometerstand letzte Initialisierung
|
|
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_STANDARDISIERUNG_MINUS_1_WERT (RXBUF_UINT32(6))
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_STANDARDISIERUNG_MINUS_1_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_STANDARDISIERUNG_MINUS_1_WERT_TYPE unsigned long
|
|
// Mileage penultimate initialization / Kilometerstand vorletzte Initialisierung
|
|
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_STANDARDISIERUNG_MINUS_2_WERT (RXBUF_UINT32(10))
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_STANDARDISIERUNG_MINUS_2_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_STANDARDISIERUNG_MINUS_2_WERT_TYPE unsigned long
|
|
// Mileage before-penultimate initialization / Kilometerstand vor-vorletzten Initialisierung
|
|
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_STANDARDISIERUNG_WERT (RXBUF_UINT(14))
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_STANDARDISIERUNG_WERT_UNIT 'd'
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_STANDARDISIERUNG_WERT_TYPE unsigned short
|
|
// Number of days since the last initialization / Anzahl der Tage seit der letzten Initialisierung
|
|
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_STANDARDISIERUNG_MINUS_1_WERT (RXBUF_UINT(16))
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_STANDARDISIERUNG_MINUS_1_WERT_UNIT 'd'
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_STANDARDISIERUNG_MINUS_1_WERT_TYPE unsigned short
|
|
// Number of days since the penultimate initialization / Anzahl der Tage seit der vorletzten Initialisierung
|
|
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_STANDARDISIERUNG_MINUS_2_WERT (RXBUF_UINT(18))
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_STANDARDISIERUNG_MINUS_2_WERT_UNIT 'd'
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_STANDARDISIERUNG_MINUS_2_WERT_TYPE unsigned short
|
|
// Number of days since the next to last initialization / Anzahl der Tage seit der vor-vorletzten Initialisierung
|
|
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_PANNE_WERT (RXBUF_UINT32(20))
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_PANNE_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_PANNE_WERT_TYPE unsigned long
|
|
// Mileage last detected flat tire / Kilometerstand letzte erkannten Reifenpanne
|
|
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_PANNE_MINUS_1_WERT (RXBUF_UINT32(24))
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_PANNE_MINUS_1_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_PANNE_MINUS_1_WERT_TYPE unsigned long
|
|
// Mileage penultimate detected flat tire / Kilometerstand vorletzte erkannten Reifenpanne
|
|
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_PANNE_MINUS_2_WERT (RXBUF_UINT32(28))
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_PANNE_MINUS_2_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_PANNE_MINUS_2_WERT_TYPE unsigned long
|
|
// Mileage before-penultimate detected flat tire / Kilometerstand vor-vorletzte erkannten Reifenpanne
|
|
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_PANNE_WERT (RXBUF_UINT(32))
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_PANNE_WERT_UNIT 'd'
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_PANNE_WERT_TYPE unsigned short
|
|
// Days since the last flat tire detected / Tage seit der letzten erkannten Reifenpanne
|
|
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_PANNE_MINUS_1_WERT (RXBUF_UINT(34))
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_PANNE_MINUS_1_WERT_UNIT 'd'
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_PANNE_MINUS_1_WERT_TYPE unsigned short
|
|
// Days since the penultimate detected flat tire / Tage seit der vorletzten erkannten Reifenpanne
|
|
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_PANNE_MINUS_2_WERT (RXBUF_UINT(36))
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_PANNE_MINUS_2_WERT_UNIT 'd'
|
|
#define I3_RES_DSC_STAT_TAGE_SEIT_LETZTER_PANNE_MINUS_2_WERT_TYPE unsigned short
|
|
// Days since the penultimate one recognized flat tire / Tage seit der vor-vorletzten erkannten Reifenpanne
|
|
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_LETZTE_PANNE_WERT (RXBUF_UCHAR(38))
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_LETZTE_PANNE_WERT_UNIT 'km/h'
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_LETZTE_PANNE_WERT_TYPE unsigned char
|
|
// Vehicle speed during the last flat tire detected / Fahrzeuggeschwindigkeit während der letzten erkannten
|
|
// Reifenpanne
|
|
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_LETZTE_PANNE_MINUS_1_WERT (RXBUF_UCHAR(39))
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_LETZTE_PANNE_MINUS_1_WERT_UNIT 'km/h'
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_LETZTE_PANNE_MINUS_1_WERT_TYPE unsigned char
|
|
// Vehicle speed during the penultimate flat tire detected / Fahrzeuggeschwindigkeit während der vorletzten
|
|
// erkannten Reifenpanne
|
|
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_LETZTE_PANNE_MINUS_2_WERT (RXBUF_UCHAR(40))
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_LETZTE_PANNE_MINUS_2_WERT_UNIT 'km/h'
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_LETZTE_PANNE_MINUS_2_WERT_TYPE unsigned char
|
|
// Vehicle speed during the penultimate to last detected flat tire / Fahrzeuggeschwindigkeit während der
|
|
// vor-vorletzten erkannten Reifenpanne
|
|
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_MAX_LETZTE_PANNE_WERT (RXBUF_UCHAR(41))
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_MAX_LETZTE_PANNE_WERT_UNIT 'km/h'
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_MAX_LETZTE_PANNE_WERT_TYPE unsigned char
|
|
// Max. Vehicle speed after the last flat tire detected (first value is entered no earlier than 30 seconds after
|
|
// the flat tire was detected) / max. Fahrzeuggeschwindigkeit nach der letzten erkannten Reifenpanne (erster wert
|
|
// wird frühestens 30 Sekunden nach der Pannenerkennung eingetragen)
|
|
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_MAX_LETZTE_PANNE_MINUS_1_WERT (RXBUF_UCHAR(42))
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_MAX_LETZTE_PANNE_MINUS_1_WERT_UNIT 'km/h'
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_MAX_LETZTE_PANNE_MINUS_1_WERT_TYPE unsigned char
|
|
// Vehicle speed during the penultimate flat tire detected / Fahrzeuggeschwindigkeit während der vorletzten
|
|
// erkannten Reifenpanne
|
|
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_MAX_LETZTE_PANNE_MINUS_2_WERT (RXBUF_UCHAR(43))
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_MAX_LETZTE_PANNE_MINUS_2_WERT_UNIT 'km/h'
|
|
#define I3_RES_DSC_STAT_GESCHWINDIGKEIT_MAX_LETZTE_PANNE_MINUS_2_WERT_TYPE unsigned char
|
|
// Vehicle speed during the penultimate to last detected flat tire / Fahrzeuggeschwindigkeit während der
|
|
// vor-vorletzten erkannten Reifenpanne
|
|
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_3PLUS1_ERKENNUNG_WERT (RXBUF_UINT32(44))
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_3PLUS1_ERKENNUNG_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_3PLUS1_ERKENNUNG_WERT_TYPE unsigned long
|
|
// Mileage last recognized 3plus constellation / Kilometerstand letzte erkannte 3plus-Konstellation
|
|
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_NEUREIFEN_ERKENNUNG_WERT (RXBUF_UINT32(48))
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_NEUREIFEN_ERKENNUNG_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KM_LETZTE_NEUREIFEN_ERKENNUNG_WERT_TYPE unsigned long
|
|
// Mileage last recognized new tire constellation / Kilometerstand letzte erkannte Neureifen-Konstellation
|
|
|
|
#define I3_RES_DSC_STAT_NEUREIFEN_POSITON (RXBUF_UCHAR(52))
|
|
#define I3_RES_DSC_STAT_NEUREIFEN_POSITON_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_NEUREIFEN_POSITON_TYPE unsigned char
|
|
// Position of the new tire at the last detection / Position des Neureifens bei der letzten Erkennung
|
|
|
|
#define I3_RES_DSC_STAT_URSACHE_WARNUNG_WERT (RXBUF_UCHAR(53))
|
|
#define I3_RES_DSC_STAT_URSACHE_WARNUNG_WERT_TYPE unsigned char
|
|
// Type of warning message (e.g. rapid loss of air pressure etc.) / Typ der Warnmeldung (z.B. schnelle
|
|
// Luftfruckverlust etc.)
|
|
|
|
#define I3_RES_DSC_STAT_MAX_NAEHERUNG_WARNGRENZE_SEIT_LETZTER_STD_WERT (RXBUF_UCHAR(54))
|
|
#define I3_RES_DSC_STAT_MAX_NAEHERUNG_WARNGRENZE_SEIT_LETZTER_STD_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_MAX_NAEHERUNG_WARNGRENZE_SEIT_LETZTER_STD_WERT_TYPE unsigned char
|
|
// The last initialization is the maximum approximation to the applied warning limit / Maximale Näherung zur
|
|
// applizierten Warngrenze siet der letzte Initialisierung
|
|
|
|
#define I3_PID_DSC_RPA_LERNDATEN_STD 0xDC15
|
|
// Reading out learning data standardization / Auslesen Lerndaten Standardisierung
|
|
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_0_WERT (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_0_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_0_WERT_TYPE unsigned char
|
|
// Learning progress speed range 0 (100% = fully learned) / Lernfortschritt Geschwindigkeitsbereich 0 (100 % =
|
|
// vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_1_WERT (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_1_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_1_WERT_TYPE unsigned char
|
|
// Learning progress speed range 1 (100% = fully learned) / Lernfortschritt Geschwindigkeitsbereich 1 (100 % =
|
|
// vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_2_WERT (RXBUF_UCHAR(2))
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_2_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_2_WERT_TYPE unsigned char
|
|
// Learning progress speed range 2 (100% = fully learned) / Lernfortschritt Geschwindigkeitsbereich 2 (100 % =
|
|
// vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_3_WERT (RXBUF_UCHAR(3))
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_3_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_3_WERT_TYPE unsigned char
|
|
// Learning progress speed range 3 (100% = fully learned) / Lernfortschritt Geschwindigkeitsbereich 3 (100 % =
|
|
// vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_4_WERT (RXBUF_UCHAR(4))
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_4_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_4_WERT_TYPE unsigned char
|
|
// Learning progress speed range 4 (100% = fully learned) / Lernfortschritt Geschwindigkeitsbereich 4 (100 % =
|
|
// vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_5_WERT (RXBUF_UCHAR(5))
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_5_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_5_WERT_TYPE unsigned char
|
|
// Learning progress speed range 5 (100% = fully learned) / Lernfortschritt Geschwindigkeitsbereich 5 (100 % =
|
|
// vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_6_WERT (RXBUF_UCHAR(6))
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_6_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_6_WERT_TYPE unsigned char
|
|
// Learning progress speed range 6 (100% = fully learned) / Lernfortschritt Geschwindigkeitsbereich 6 (100 % =
|
|
// vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_7_WERT (RXBUF_UCHAR(7))
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_7_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_LERNSTATUS_BEREICH_7_WERT_TYPE unsigned char
|
|
// Learning progress speed range 7 (100% = fully learned) / Lernfortschritt Geschwindigkeitsbereich 7 (100 % =
|
|
// vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_0_WERT (RXBUF_UCHAR(8))
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_0_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_0_WERT_TYPE unsigned char
|
|
// Learning status curve compensation speed range 0 (100% = fully learned) / Lernstatus Kurvenkompensation
|
|
// Geschwindigkeitsbereich 0 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_1_WERT (RXBUF_UCHAR(9))
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_1_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_1_WERT_TYPE unsigned char
|
|
// Learning status curve compensation speed range 1 (100% = fully learned) / Lernstatus Kurvenkompensation
|
|
// Geschwindigkeitsbereich 1 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_2_WERT (RXBUF_UCHAR(10))
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_2_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_2_WERT_TYPE unsigned char
|
|
// Learning status curve compensation speed range 2 (100% = fully learned) / Lernstatus Kurvenkompensation
|
|
// Geschwindigkeitsbereich 2 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_3_WERT (RXBUF_UCHAR(11))
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_3_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_3_WERT_TYPE unsigned char
|
|
// Learning status curve compensation speed range 3 (100% = fully learned) / Lernstatus Kurvenkompensation
|
|
// Geschwindigkeitsbereich 3 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_4_WERT (RXBUF_UCHAR(12))
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_4_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_4_WERT_TYPE unsigned char
|
|
// Learning status curve compensation speed range 4 (100% = fully learned) / Lernstatus Kurvenkompensation
|
|
// Geschwindigkeitsbereich 4 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_5_WERT (RXBUF_UCHAR(13))
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_5_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_5_WERT_TYPE unsigned char
|
|
// Learning status curve compensation speed range 5 (100% = fully learned) / Lernstatus Kurvenkompensation
|
|
// Geschwindigkeitsbereich 5 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_6_WERT (RXBUF_UCHAR(14))
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_6_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_6_WERT_TYPE unsigned char
|
|
// Learning status curve compensation speed range 6 (100% = fully learned) / Lernstatus Kurvenkompensation
|
|
// Geschwindigkeitsbereich 6 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_7_WERT (RXBUF_UCHAR(15))
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_7_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_KURVENKOMPENSATION_7_WERT_TYPE unsigned char
|
|
// Learning status curve compensation speed range 7 (100% = fully learned) / Lernstatus Kurvenkompensation
|
|
// Geschwindigkeitsbereich 7 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_0_WERT (RXBUF_UCHAR(16))
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_0_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_0_WERT_TYPE unsigned char
|
|
// Learning status torque compensation torque range 0 (100% = fully learned) / Lernstatus Momentenkompensation
|
|
// Momentenbereich 0 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_1_WERT (RXBUF_UCHAR(17))
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_1_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_1_WERT_TYPE unsigned char
|
|
// Learning status torque compensation torque range 1 (100% = fully learned) / Lernstatus Momentenkompensation
|
|
// Momentenbereich 1 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_2_WERT (RXBUF_UCHAR(18))
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_2_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_2_WERT_TYPE unsigned char
|
|
// Learning status torque compensation torque range 2 (100% = fully learned) / Lernstatus Momentenkompensation
|
|
// Momentenbereich 2 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_3_WERT (RXBUF_UCHAR(19))
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_3_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_3_WERT_TYPE unsigned char
|
|
// Learning status torque compensation torque range 3 (100% = fully learned) / Lernstatus Momentenkompensation
|
|
// Momentenbereich 3 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_4_WERT (RXBUF_UCHAR(20))
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_4_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_4_WERT_TYPE unsigned char
|
|
// Learning status torque compensation torque range 4 (100% = fully learned) / Lernstatus Momentenkompensation
|
|
// Momentenbereich 4 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_5_WERT (RXBUF_UCHAR(21))
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_5_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_5_WERT_TYPE unsigned char
|
|
// Learning status torque compensation torque range 5 (100% = fully learned) / Lernstatus Momentenkompensation
|
|
// Momentenbereich 5 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_6_WERT (RXBUF_UCHAR(22))
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_6_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_6_WERT_TYPE unsigned char
|
|
// Learning status torque compensation torque range 6 (100% = fully learned) / Lernstatus Momentenkompensation
|
|
// Momentenbereich 6 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_7_WERT (RXBUF_UCHAR(23))
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_7_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_MOMENTENKOMPENSATION_7_WERT_TYPE unsigned char
|
|
// Learning status torque compensation torque range 7 (100% = fully learned) / Lernstatus Momentenkompensation
|
|
// Momentenbereich 7 (100 % = vollständig eingelernt)
|
|
|
|
#define I3_PID_DSC_DSC_BREMSLICHTSCHALTER 0xDC1E
|
|
// Read out brake light switch 1 = on (lights up); 0 = off / Auslesen Bremslichtschalter 1= ein (leuchtet); 0=
|
|
// aus
|
|
|
|
#define I3_RES_DSC_STAT_SCHALTER_BREMSLICHT_EIN (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_SCHALTER_BREMSLICHT_EIN_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_SCHALTER_BREMSLICHT_EIN_TYPE unsigned char
|
|
// Read out brake light switch 1 = on (lights up); 0 = off / Auslesen Bremslichtschalter 1= ein (leuchtet); 0=
|
|
// aus
|
|
|
|
#define I3_PID_DSC_BREMSFLUESSIGKEITSSCHALTER 0xDC1F
|
|
// Reading level of brake fluid 1 = brake fluid available; 0 = brake fluid empty or interruption / Auslesen
|
|
// Niveau Bremsflüssigkeit 1 = Bremsflüssigkeit vorhanden; 0 = Bremsflüssigkeit leer oder Unterbrechung
|
|
|
|
#define I3_RES_DSC_STAT_BREMSFLUESSIGKEIT_NIVEAU_SCHALTER_EIN (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_BREMSFLUESSIGKEIT_NIVEAU_SCHALTER_EIN_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_BREMSFLUESSIGKEIT_NIVEAU_SCHALTER_EIN_TYPE unsigned char
|
|
// Reading level of brake fluid 1 = brake fluid available; 0 = brake fluid empty or interruption / Auslesen
|
|
// Niveau Bremsflüssigkeit 1 = Bremsflüssigkeit vorhanden; 0 = Bremsflüssigkeit leer oder Unterbrechung
|
|
|
|
#define I3_PID_DSC_STATUS_GBRPLUS 0xDC3A
|
|
// Read out data limit range feedback (GBR) / Auslesen Daten Grenzbereichsrückmeldung (GBR)
|
|
|
|
#define I3_RES_DSC_STAT_FAKTORU_EPS_WERT (RXBUF_UCHAR(0)/100.0f)
|
|
#define I3_RES_DSC_STAT_FAKTORU_EPS_WERT_TYPE float
|
|
// Factor by which the GBR influences the steering assistance of the EPS / Faktor, über den die GBR die
|
|
// Lenkunterstützung der EPS beeinflusst
|
|
|
|
#define I3_RES_DSC_STAT_FAKTORARD_EPS_WERT (RXBUF_UCHAR(1)/100.0f)
|
|
#define I3_RES_DSC_STAT_FAKTORARD_EPS_WERT_TYPE float
|
|
// Factor by which the GBR influences the damping of the EPS / Faktor, über den die GBR die Dämpfung der EPS
|
|
// beinflusst
|
|
|
|
#define I3_RES_DSC_STAT_FAKTORARZ_EPS_WERT (RXBUF_UCHAR(2)/100.0f)
|
|
#define I3_RES_DSC_STAT_FAKTORARZ_EPS_WERT_TYPE float
|
|
// Factor by which the GBR influences the active return of the EPS / Faktor, über den die GBR den aktiven
|
|
// Rücklauf der EPS beeinflusst
|
|
|
|
#define I3_RES_DSC_STAT_MMOTOR_OFFSET_EPS_WERT_0XDC3A (RXBUF_SCHAR(3)/100.0f)
|
|
#define I3_RES_DSC_STAT_MMOTOR_OFFSET_EPS_WERT_0XDC3A_TYPE float
|
|
// Offset motor torque, which the EPS additively superimposes on its own motor torque / Offset-Motormoment, das
|
|
// die EPS dem eigenen Motormoment additiv überlagert
|
|
|
|
#define I3_RES_DSC_STAT_FAKTOR_EPS_QUALIFIER_WERT (RXBUF_UCHAR(4))
|
|
#define I3_RES_DSC_STAT_FAKTOR_EPS_QUALIFIER_WERT_TYPE unsigned char
|
|
// Target value qualifier for the 3 factors (2 = implement, 14 = do not implement) / Sollwert-Qualifier zu den 3
|
|
// Faktoren (2 = umsetzen, 14 = nicht umsetzen)
|
|
|
|
#define I3_RES_DSC_STAT_OFFSET_EPS_QUALIFIER_WERT_0XDC3A (RXBUF_UCHAR(5))
|
|
#define I3_RES_DSC_STAT_OFFSET_EPS_QUALIFIER_WERT_0XDC3A_TYPE unsigned char
|
|
// Setpoint qualifier for offset motor torque (2 = implement; 14 = do not implement) / Sollwert-Qualifier zum
|
|
// OffsetMotormoment (2 = umsetzen; 14 = nicht umsetzen)
|
|
|
|
#define I3_RES_DSC_STAT_FUNKTION_GBR_CODIERUNG_EIN (RXBUF_UCHAR(6))
|
|
#define I3_RES_DSC_STAT_FUNKTION_GBR_CODIERUNG_EIN_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_FUNKTION_GBR_CODIERUNG_EIN_TYPE unsigned char
|
|
// GBR function (1 = coded in; 0 = coded out) / GBR-Funktion (1 = eincodiert; 0 = auscodiert)
|
|
|
|
#define I3_RES_DSC_STAT_FUNKTION_GBR_KENNLINIE_NUMMER_WERT_0XDC3A (RXBUF_UCHAR(7))
|
|
#define I3_RES_DSC_STAT_FUNKTION_GBR_KENNLINIE_NUMMER_WERT_0XDC3A_TYPE unsigned char
|
|
// active GBR characteristic set / aktiver GBR Kennliniensatz
|
|
|
|
#define I3_RES_DSC_STAT_EPS_FAKT_MOM_SERVICE_QUALIFIER_WERT_0XDC3A (RXBUF_UCHAR(8))
|
|
#define I3_RES_DSC_STAT_EPS_FAKT_MOM_SERVICE_QUALIFIER_WERT_0XDC3A_TYPE unsigned char
|
|
// Service qualifier of the EPS for the implementation of the factors and the offset motor torque (everything OK
|
|
// if 32 or 33) / Service-Qualifier der EPS für Umsetzung der Faktoren und des Offset-Motormoments (alles i.O
|
|
// wenn 32 od 33)
|
|
|
|
#define I3_RES_DSC_STAT_ZUSTAND_GRENZBEREICHSREUCKMELDUNG_WERT (RXBUF_UCHAR(9))
|
|
#define I3_RES_DSC_STAT_ZUSTAND_GRENZBEREICHSREUCKMELDUNG_WERT_TYPE unsigned char
|
|
// Actual state of the GBR function (depending on the qualifiers of the inputs) / Ist-Zustand der GBR-Funktion
|
|
// (abhängig von Qualifiern der Eingänge)
|
|
|
|
#define I3_PID_DSC_STATUS_LLP 0xDC42
|
|
// Reading out data steering power prediction / Auslesen Daten Lenkleistungsprädiktion
|
|
|
|
#define I3_RES_DSC_STAT_LLP_MANI_AKTIV (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_LLP_MANI_AKTIV_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_MANI_AKTIV_TYPE unsigned char
|
|
// Manual intervention (0 = not active; 1 = active) / Manueller Eingriff (0= nicht aktiv; 1 = aktiv)
|
|
|
|
#define I3_RES_DSC_STAT_LLP_MANI_WERT (RXBUF_SCHAR(1)/10.0f)
|
|
#define I3_RES_DSC_STAT_LLP_MANI_WERT_UNIT 'kW'
|
|
#define I3_RES_DSC_STAT_LLP_MANI_WERT_TYPE float
|
|
// Manual value / Manueller Wert
|
|
|
|
#define I3_RES_DSC_STAT_LLP_CALC_WERT (RXBUF_SCHAR(2)/10.0f)
|
|
#define I3_RES_DSC_STAT_LLP_CALC_WERT_UNIT 'kW'
|
|
#define I3_RES_DSC_STAT_LLP_CALC_WERT_TYPE float
|
|
// Calculated value / Berechneter Wert
|
|
|
|
#define I3_RES_DSC_STAT_LLP_PEL_IST_WERT (RXBUF_SCHAR(3)/10.0f)
|
|
#define I3_RES_DSC_STAT_LLP_PEL_IST_WERT_UNIT 'kW'
|
|
#define I3_RES_DSC_STAT_LLP_PEL_IST_WERT_TYPE float
|
|
// Measured value / Gemessener Wert
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FZS_WERT (RXBUF_SINT(4))
|
|
#define I3_RES_DSC_STAT_LLP_FZS_WERT_UNIT 'N'
|
|
#define I3_RES_DSC_STAT_LLP_FZS_WERT_TYPE short
|
|
// Power rack / Kraft Zahnstange
|
|
|
|
#define I3_RES_DSC_STAT_LLP_RITZELWINKEL_WERT (RXBUF_SINT(6))
|
|
#define I3_RES_DSC_STAT_LLP_RITZELWINKEL_WERT_UNIT '°'
|
|
#define I3_RES_DSC_STAT_LLP_RITZELWINKEL_WERT_TYPE short
|
|
// Pinion angle / Ritzelwinkel
|
|
|
|
#define I3_RES_DSC_STAT_LLP_ANTEIL_HUB_WERT (RXBUF_SCHAR(8))
|
|
#define I3_RES_DSC_STAT_LLP_ANTEIL_HUB_WERT_UNIT '%'
|
|
#define I3_RES_DSC_STAT_LLP_ANTEIL_HUB_WERT_TYPE char
|
|
// Standardized rack stroke / Normierter Zahnstangenhub
|
|
|
|
#define I3_RES_DSC_STAT_LLP_V_ZS_WERT (RXBUF_SINT(9)/1000.0f)
|
|
#define I3_RES_DSC_STAT_LLP_V_ZS_WERT_UNIT 'm/s'
|
|
#define I3_RES_DSC_STAT_LLP_V_ZS_WERT_TYPE float
|
|
// Speed rack / Geschwindigkeit Zahnstange
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FAHRERHANDMOMENT_WERT (RXBUF_SINT(11)/100.0f)
|
|
#define I3_RES_DSC_STAT_LLP_FAHRERHANDMOMENT_WERT_UNIT 'Nm'
|
|
#define I3_RES_DSC_STAT_LLP_FAHRERHANDMOMENT_WERT_TYPE float
|
|
// Torque steering wheel (driver) / Drehmoment Lenkrad (Fahrer)
|
|
|
|
#define I3_RES_DSC_STAT_LLP_VX_ENTRY (RXBUF_UCHAR(13))
|
|
#define I3_RES_DSC_STAT_LLP_VX_ENTRY_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_VX_ENTRY_TYPE unsigned char
|
|
// Incorrect speed / Geschwindigkeit fehlerhaft
|
|
|
|
#define I3_RES_DSC_STAT_LLP_AX_KORR (RXBUF_UCHAR(14))
|
|
#define I3_RES_DSC_STAT_LLP_AX_KORR_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_AX_KORR_TYPE unsigned char
|
|
// Longitudinal acceleration incorrect / Längsbeschleunigung fehlerhaft
|
|
|
|
#define I3_RES_DSC_STAT_LLP_RETURN (RXBUF_UCHAR(15))
|
|
#define I3_RES_DSC_STAT_LLP_RETURN_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_RETURN_TYPE unsigned char
|
|
// Turn recognized / Wenden erkannt
|
|
|
|
#define I3_RES_DSC_STAT_LLP_STOP (RXBUF_UCHAR(16))
|
|
#define I3_RES_DSC_STAT_LLP_STOP_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_STOP_TYPE unsigned char
|
|
// Parking detected / Parken erkannt
|
|
|
|
#define I3_RES_DSC_STAT_LLP_EXTRAP_PEL (RXBUF_UCHAR(17))
|
|
#define I3_RES_DSC_STAT_LLP_EXTRAP_PEL_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_EXTRAP_PEL_TYPE unsigned char
|
|
// Electric power extrapolated / Elektrische Leistung extrapoliert
|
|
|
|
#define I3_RES_DSC_STAT_LLP_EXTRAP_FZS (RXBUF_UCHAR(18))
|
|
#define I3_RES_DSC_STAT_LLP_EXTRAP_FZS_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_EXTRAP_FZS_TYPE unsigned char
|
|
// Force rack extrapolated / Kraft Zahnstange extrapoliert
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FZSREDUC_BRAKE (RXBUF_UCHAR(19))
|
|
#define I3_RES_DSC_STAT_LLP_FZSREDUC_BRAKE_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_FZSREDUC_BRAKE_TYPE unsigned char
|
|
// Front axle unbraked / Vorderachse entbremst
|
|
|
|
#define I3_RES_DSC_STAT_LLP_PMA (RXBUF_UCHAR(20))
|
|
#define I3_RES_DSC_STAT_LLP_PMA_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_PMA_TYPE unsigned char
|
|
// Parking maneuvering assistant recognized / Parkenmanöverassistent erkannt
|
|
|
|
#define I3_RES_DSC_STAT_LLP_PDC (RXBUF_UCHAR(21))
|
|
#define I3_RES_DSC_STAT_LLP_PDC_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_PDC_TYPE unsigned char
|
|
// Park Distance Control detected / Park Distance Control erkannt
|
|
|
|
#define I3_RES_DSC_STAT_LLP_TEMP_A (RXBUF_UCHAR(22))
|
|
#define I3_RES_DSC_STAT_LLP_TEMP_A_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_TEMP_A_TYPE unsigned char
|
|
// Outside temperature detected / Außentemperatur erkannt
|
|
|
|
#define I3_RES_DSC_STAT_LLP_RAIN (RXBUF_UCHAR(23))
|
|
#define I3_RES_DSC_STAT_LLP_RAIN_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_RAIN_TYPE unsigned char
|
|
// Rain recognized / Regen erkannt
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_AX (RXBUF_UCHAR(24))
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_AX_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_AX_TYPE unsigned char
|
|
// Longitudinal acceleration active / Längsbeschleunigung aktiv
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_STOP (RXBUF_UCHAR(25))
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_STOP_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_STOP_TYPE unsigned char
|
|
// Parking active / Parken aktiv
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_RAIN (RXBUF_UCHAR(26))
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_RAIN_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_RAIN_TYPE unsigned char
|
|
// Rain active / Regen aktiv
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_PMA (RXBUF_UCHAR(27))
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_PMA_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_PMA_TYPE unsigned char
|
|
// Parking maneuver assistant active / Parkenmanöverassistent aktiv
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_PDC (RXBUF_UCHAR(28))
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_PDC_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_PDC_TYPE unsigned char
|
|
// Park Distance Control active / Park Distance Control aktiv
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_RETURN (RXBUF_UCHAR(29))
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_RETURN_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_RETURN_TYPE unsigned char
|
|
// Active turning / Wenden aktiv
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_TEMP_A (RXBUF_UCHAR(30))
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_TEMP_A_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_TEMP_A_TYPE unsigned char
|
|
// Outside temperature active / Außentemperatur aktiv
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_EXTRAP_FZS (RXBUF_UCHAR(31))
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_EXTRAP_FZS_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_EXTRAP_FZS_TYPE unsigned char
|
|
// Power rack active / Kraft Zahnstange aktiv
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_EXTRAP_PEL (RXBUF_UCHAR(32))
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_EXTRAP_PEL_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_EXTRAP_PEL_TYPE unsigned char
|
|
// Electric power active / Elektrische Leistung aktiv
|
|
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_FZSREDUC_BRAKE (RXBUF_UCHAR(33))
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_FZSREDUC_BRAKE_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_LLP_FLAG_FZSREDUC_BRAKE_TYPE unsigned char
|
|
// Front axle active / Vorderachse aktiv
|
|
|
|
#define I3_PID_DSC_ABS_FUNKTION 0xDC6C
|
|
// Read status of anti-lock braking system (ABS) function / Auslesen Status Funktion Antiblockiersystem (ABS)
|
|
|
|
#define I3_RES_DSC_STAT_ABS_FUNKTION (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_ABS_FUNKTION_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ABS_FUNKTION_TYPE unsigned char
|
|
// Status of the anti-lock braking system (ABS) function / Status Funktion Antiblockiersystem (ABS)
|
|
|
|
#define I3_RES_DSC_STAT_ABS_FUNKTION_QUALIFIER_WERT (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_ABS_FUNKTION_QUALIFIER_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_ABS_FUNKTION_QUALIFIER_WERT_TYPE unsigned char
|
|
// Basic qualifier function anti-lock braking system (ABS) / Basis Qualifier Funktion Antiblockiersystem (ABS)
|
|
|
|
#define I3_RES_DSC_STAT_ABS_FUNKTION_QUALIFIER_ERW_WERT (RXBUF_UCHAR(2))
|
|
#define I3_RES_DSC_STAT_ABS_FUNKTION_QUALIFIER_ERW_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_ABS_FUNKTION_QUALIFIER_ERW_WERT_TYPE unsigned char
|
|
// Extended qualifier function anti-lock braking system (ABS) / Erweiterter Qualifier Funktion Antiblockiersystem
|
|
// (ABS)
|
|
|
|
#define I3_PID_DSC_ASC_FUNKTION 0xDC6D
|
|
// Read out status function traction control (ASC) / Auslesen Status Funktion Antriebsschlupfregelung (ASC)
|
|
|
|
#define I3_RES_DSC_STAT_ASC_FUNKTION (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_ASC_FUNKTION_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ASC_FUNKTION_TYPE unsigned char
|
|
// Status function traction control (ASC) / Status Funktion Antriebsschlupfregelung (ASC)
|
|
|
|
#define I3_RES_DSC_STAT_ASC_FUNKTION_QUALIFIER_WERT (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_ASC_FUNKTION_QUALIFIER_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_ASC_FUNKTION_QUALIFIER_WERT_TYPE unsigned char
|
|
// Basic qualifier function traction control (ASC) / Basis Qualifier Funktion Antriebsschlupfregelung (ASC)
|
|
|
|
#define I3_RES_DSC_STAT_ASC_FUNKTION_QUALIFIER_ERW_WERT (RXBUF_UCHAR(2))
|
|
#define I3_RES_DSC_STAT_ASC_FUNKTION_QUALIFIER_ERW_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_ASC_FUNKTION_QUALIFIER_ERW_WERT_TYPE unsigned char
|
|
// Extended qualifier function traction control (ASC) / Erweiterter Qualifier Funktion Antriebsschlupfregelung
|
|
// (ASC)
|
|
|
|
#define I3_PID_DSC_FDR_FUNKTION 0xDC6E
|
|
// Read out status of vehicle stabilization function (FDR) / Auslesen Status Funktion Fahrzeugstabilisierung
|
|
// (FDR)
|
|
|
|
#define I3_RES_DSC_STAT_FDR_FUNKTION (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_FDR_FUNKTION_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_FDR_FUNKTION_TYPE unsigned char
|
|
// Status of the vehicle stabilization function (FDR) / Status Funktion Fahrzeugstabilisierung (FDR)
|
|
|
|
#define I3_RES_DSC_STAT_FDR_FUNKTION_QUALIFIER_WERT (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_FDR_FUNKTION_QUALIFIER_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_FDR_FUNKTION_QUALIFIER_WERT_TYPE unsigned char
|
|
// Basic qualifier function vehicle stabilization (FDR) / Basis Qualifier Funktion Fahrzeugstabilisierung (FDR)
|
|
|
|
#define I3_RES_DSC_STAT_FDR_FUNKTION_QUALIFIER_ERW_WERT (RXBUF_UCHAR(2))
|
|
#define I3_RES_DSC_STAT_FDR_FUNKTION_QUALIFIER_ERW_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_FDR_FUNKTION_QUALIFIER_ERW_WERT_TYPE unsigned char
|
|
// Extended qualifier function vehicle stabilization (FDR) / Erweiterter Qualifier Funktion
|
|
// Fahrzeugstabilisierung (FDR)
|
|
|
|
#define I3_PID_DSC_PBRK_FUNKTION 0xDC6F
|
|
// Read status of parking brake function (PBRK) / Auslesen Status Funktion Parkbremse (PBRK)
|
|
|
|
#define I3_RES_DSC_STAT_PBRK_FUNKTION (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_PBRK_FUNKTION_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_PBRK_FUNKTION_TYPE unsigned char
|
|
// Status parking brake function (PBRK) / Status Funktion Parkbremse (PBRK)
|
|
|
|
#define I3_RES_DSC_STAT_PBRK_FUNKTION_QUALIFIER_WERT (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_PBRK_FUNKTION_QUALIFIER_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_PBRK_FUNKTION_QUALIFIER_WERT_TYPE unsigned char
|
|
// Basic qualifier function parking brake (PBRK) / Basis Qualifier Funktion Parkbremse (PBRK)
|
|
|
|
#define I3_RES_DSC_STAT_PBRK_FUNKTION_QUALIFIER_ERW_WERT (RXBUF_UCHAR(2))
|
|
#define I3_RES_DSC_STAT_PBRK_FUNKTION_QUALIFIER_ERW_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_PBRK_FUNKTION_QUALIFIER_ERW_WERT_TYPE unsigned char
|
|
// Extended qualifier function parking brake (PBRK) / Erweiterter Qualifier Funktion Parkbremse (PBRK)
|
|
|
|
#define I3_PID_DSC_HDC_FUNKTION 0xDC70
|
|
// Read out status function hill descent assistant (HDC) / Auslesen Status Funktion Bergabfahrassistent (HDC)
|
|
|
|
#define I3_RES_DSC_STAT_HDC_FUNKTION (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_HDC_FUNKTION_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_HDC_FUNKTION_TYPE unsigned char
|
|
// Status function hill descent assistant (HDC) / Status Funktion Bergabfahrassistent (HDC)
|
|
|
|
#define I3_RES_DSC_STAT_HDC_FUNKTION_QUALIFIER_WERT (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_HDC_FUNKTION_QUALIFIER_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_HDC_FUNKTION_QUALIFIER_WERT_TYPE unsigned char
|
|
// Basic qualifier function hill descent assistant (HDC) / Basis Qualifier Funktion Bergabfahrassistent (HDC)
|
|
|
|
#define I3_RES_DSC_STAT_HDC_FUNKTION_QUALIFIER_ERW_WERT (RXBUF_UCHAR(2))
|
|
#define I3_RES_DSC_STAT_HDC_FUNKTION_QUALIFIER_ERW_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_HDC_FUNKTION_QUALIFIER_ERW_WERT_TYPE unsigned char
|
|
// Extended qualifier function Hill Descent Assistant (HDC) / Erweiterter Qualifier Funktion Bergabfahrassistent
|
|
// (HDC)
|
|
|
|
// Skipping ADAPTIVDATEN_SBS on 0xDC89 which takes arguments
|
|
|
|
// Skipping ADAPTIVDATEN_AAEPS on 0xDC8A which takes arguments
|
|
|
|
// Skipping ADAPTIVDATEN_EV on 0xDC8B which takes arguments
|
|
|
|
// Skipping ADAPTIVDATEN_TSC on 0xDC8C which takes arguments
|
|
|
|
// Skipping ADAPTIVDATEN_ZFM on 0xDC8D which takes arguments
|
|
|
|
#define I3_PID_DSC_MIRROR_AAEPS 0xDC8F
|
|
// MIRROR_AAEPS / MIRROR_AAEPS
|
|
|
|
// Can't process STAT_LWA_EPS_OFFSET_BESTAET_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_LWA_EPS_OFFS_KORR_ZAEHL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
#define I3_PID_DSC_MIRROR_EV 0xDC90
|
|
// MIRROR_EV / MIRROR_EV
|
|
|
|
// Can't process STAT_SBS2EV_R_VCH_INTRO_B_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_SBS2EV_R_VCH_INTRO_L_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_SBS2EV_R_VCH_INTRO_R_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_SBS_2EV_R_VCH_WERT0_B_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_SBS_2EV_R_VCH_WERT0_L_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_SBS_2EV_R_VCH_WERT0_R_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
#define I3_PID_DSC_MIRROR_SBS 0xDC91
|
|
// MIRROR_SBS / MIRROR_SBS
|
|
|
|
// Can't process STAT_COMP_OFS_AX1_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_AX1_TOL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_SENS_AX1_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_AY1_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_AY1_TOL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_AY2_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_AY2_TOL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_AZ1_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_AZ1_TOL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_SENS_AZ1_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_DE_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_DEW_LT_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_DEYR_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_DEWYR_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_DE_TOL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_DEW_TOL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_SENS_VWHL_HL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_SENS_VWHL_HR_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_SENS_VWHL_VL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_SENS_VWHL_VR_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_RY1_STST_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_RY1_DRV_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_RY1_TOL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_KYR_RY1_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_XR1_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_XR1_TOL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_SENS_XR1_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_KYR_XR1_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_YR1_DRV_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_YR1_STST1_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_YR1_TOL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_SENS_YR1_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_YR2_DRV_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_YR2_STST_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_OFS_YR2_TOL_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_COMP_SENS_YR2_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_I_SBS_3DE_IDE_CODE_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_I_AY1_SGN_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_I_AY2_SGN_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_I_YR1_SGN_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_I_YR2_SGN_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
// Can't process STAT_I_YR_WH_SGN_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
#define I3_PID_DSC_MIRROR_TSC 0xDC92
|
|
// Setpoint manual torque factor / Faktor Soll-Handmoment
|
|
|
|
// Can't process STAT_TSC_FAKTOR_SOLL_HANDMOMENT_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
#define I3_PID_DSC_MIRROR_ZFM 0xDC93
|
|
// Offset longitudinal acceleration motor torque / Offset Längsbeschleunigung Motormoment
|
|
|
|
// Can't process STAT_ZFMFS_OFS_AXM_WERT - don't know type motorola float (*** this will mean all the following offsets are wrong!!! ****)
|
|
|
|
#define I3_PID_DSC_STATUS_RDC_VERSION 0xDC94
|
|
// Displays the current software version of the RDC. / Zeigt die aktuelle Softwareversion vom RDC an.
|
|
|
|
#define I3_RES_DSC_STAT_RDC_VERSION_WERT (RXBUF_UINT(0))
|
|
#define I3_RES_DSC_STAT_RDC_VERSION_WERT_TYPE unsigned short
|
|
// Displays the current software version of the RDC. / Zeigt die aktuelle Softwareversion vom RDC an.
|
|
|
|
#define I3_PID_DSC_STATUS_RDC_LESEN 0xDC95
|
|
// STATUS_RDC_LESEN / STATUS_RDC_LESEN
|
|
|
|
#define I3_RES_DSC_STAT_EIGENRAEDER_BEKANNT (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_EIGENRAEDER_BEKANNT_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_EIGENRAEDER_BEKANNT_TYPE unsigned char
|
|
// All eigenwheels are known: 0 = not known; 1 = known / Alle Eigenraeder sind bekannt: 0 = nicht bekannt; 1 =
|
|
// bekannt
|
|
|
|
#define I3_RES_DSC_STAT_RADPOS_ER_BEKANNT (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_RADPOS_ER_BEKANNT_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOS_ER_BEKANNT_TYPE unsigned char
|
|
// The wheel positions of all own wheels are known: 0 = not known; 1 = known / Radpositionen aller Eigenraeder
|
|
// sind bekannt: 0 = nicht bekannt; 1 = bekannt
|
|
|
|
#define I3_RES_DSC_STAT_RADPOS_UEBERPRUEFT_BESTAETIGT (RXBUF_UCHAR(2))
|
|
#define I3_RES_DSC_STAT_RADPOS_UEBERPRUEFT_BESTAETIGT_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOS_UEBERPRUEFT_BESTAETIGT_TYPE unsigned char
|
|
// All wheel positions are checked and confirmed: 0 = not confirmed; 1 = confirmed / Alle Radpositionen sind
|
|
// ueberprueft und bestaetigt: 0 = nicht bestätigt; 1 = bestätigt
|
|
|
|
#define I3_RES_DSC_STAT_DTC_INACTIVE (RXBUF_UCHAR(3))
|
|
#define I3_RES_DSC_STAT_DTC_INACTIVE_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_DTC_INACTIVE_TYPE unsigned char
|
|
// Active DTC error with warning lamp in the error memory: 0 = DTC inactive; 1 = DTC active / Aktiver DTC Fehler
|
|
// mit Warnlampe im Fehlerspeicher vorhanden: 0 = DTC inaktiv; 1 = DTC aktiv
|
|
|
|
#define I3_RES_DSC_STAT_KAL_ANFORDERUNG_AKTIV (RXBUF_UCHAR(4))
|
|
#define I3_RES_DSC_STAT_KAL_ANFORDERUNG_AKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_KAL_ANFORDERUNG_AKTIV_TYPE unsigned char
|
|
// Calibration request pending: 0 = calibration request inactive; 1 = calibration request active /
|
|
// Kalibrieranforderung steht an: 0 = Kalibrieranforderung inaktiv; 1 = Kalibrieranforderung aktiv
|
|
|
|
#define I3_RES_DSC_STAT_RAD_ZUORDNUNG_TIMEOUT (RXBUF_UCHAR(5))
|
|
#define I3_RES_DSC_STAT_RAD_ZUORDNUNG_TIMEOUT_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RAD_ZUORDNUNG_TIMEOUT_TYPE unsigned char
|
|
// Wheel assignment could not be completed: 0 = no timeout; 1 = timeout / Radzuordnung konnte nicht abgeschlossen
|
|
// werden: 0 = kein Timeout; 1 = Timeout
|
|
|
|
#define I3_RES_DSC_STAT_BANDMODE_AKTIV (RXBUF_UCHAR(6))
|
|
#define I3_RES_DSC_STAT_BANDMODE_AKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_BANDMODE_AKTIV_TYPE unsigned char
|
|
// Query whether belt mode is activated in the RDC: 0 = belt mode inactive; 1 = band mode active / Abfrage ob
|
|
// Bandmode im RDC aktiviert ist: 0 = Bandmode inaktiv ; 1 = Bandmode aktiv
|
|
|
|
#define I3_RES_DSC_STAT_ER_ERKENNUNG_FAHRT (RXBUF_UCHAR(7))
|
|
#define I3_RES_DSC_STAT_ER_ERKENNUNG_FAHRT_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ER_ERKENNUNG_FAHRT_TYPE unsigned char
|
|
// Own wheel recognition was started while driving: 0 = not started 1 = started / Eigenraderkennung waehrend der
|
|
// Fahrt wurde gestartet: 0 = nicht gestartet 1 = gestartet
|
|
|
|
#define I3_RES_DSC_STAT_TEST_EIGENRAD_FAHRT (RXBUF_UCHAR(8))
|
|
#define I3_RES_DSC_STAT_TEST_EIGENRAD_FAHRT_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_TEST_EIGENRAD_FAHRT_TYPE unsigned char
|
|
// Test own wheel detection while driving was started: 0 = not started, 1 = started / Test-Eigenraderkennung in
|
|
// Fahrt wurde gestartet: 0 = nicht gestartet , 1 = gestartet
|
|
|
|
#define I3_RES_DSC_STAT_TEST_EIGENRAD_STAND (RXBUF_UCHAR(9))
|
|
#define I3_RES_DSC_STAT_TEST_EIGENRAD_STAND_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_TEST_EIGENRAD_STAND_TYPE unsigned char
|
|
// Test own wheel recognition was started while stationary: 0 = not started, 1 = started / Test-Eigenraderkennung
|
|
// im Stand wurde gestartet: 0 = nicht gestartet, 1 = gestartet
|
|
|
|
#define I3_RES_DSC_STAT_ER_FAHRT_VTHRS_AKTIV (RXBUF_UCHAR(10))
|
|
#define I3_RES_DSC_STAT_ER_FAHRT_VTHRS_AKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ER_FAHRT_VTHRS_AKTIV_TYPE unsigned char
|
|
// Speed threshold for own wheel recognition activated when driving: 0 = inactive, 1 = active /
|
|
// Geschwindigkeitsschwelle fuer Eigenraderkennung bei Fahrt aktiviert : 0 = inaktiv , 1 = aktiv
|
|
|
|
#define I3_RES_DSC_STAT_BM_TIMEOUT_ACTIVE (RXBUF_UCHAR(11))
|
|
#define I3_RES_DSC_STAT_BM_TIMEOUT_ACTIVE_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_BM_TIMEOUT_ACTIVE_TYPE unsigned char
|
|
// Belt mode timeout is running: 0 = inactive, 1 = active / Bandmode Timeout laeuft : 0 = inaktiv , 1 = aktiv
|
|
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_UNSPEZIFISCH_AKTIV (RXBUF_UCHAR(12))
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_UNSPEZIFISCH_AKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_UNSPEZIFISCH_AKTIV_TYPE unsigned char
|
|
// Hard warning unspecific, active: 0 = inactive; 1 = active / Harte Warnung unspezifisch, aktiv: 0 = inaktiv ; 1
|
|
// = aktiv
|
|
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_VL_AKTIV (RXBUF_UCHAR(13))
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_VL_AKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_VL_AKTIV_TYPE unsigned char
|
|
// Hard warning front left, active: 0 = inactive; 1 = active / Harte Warnung vorne links, aktiv: 0 = inaktiv ; 1
|
|
// = aktiv
|
|
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_VR_AKTIV (RXBUF_UCHAR(14))
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_VR_AKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_VR_AKTIV_TYPE unsigned char
|
|
// Hard warning front right, active: 0 = inactive; 1 = active / Harte Warnung vorne rechts, aktiv: 0 = inaktiv ;
|
|
// 1 = aktiv
|
|
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_HL_AKTIV (RXBUF_UCHAR(15))
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_HL_AKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_HL_AKTIV_TYPE unsigned char
|
|
// Hard rear left warning, active: 0 = inactive; 1 = active / Harte Warnung hinten links, aktiv: 0 = inaktiv ; 1
|
|
// = aktiv
|
|
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_HR_AKTIV (RXBUF_UCHAR(16))
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_HR_AKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_HR_AKTIV_TYPE unsigned char
|
|
// Hard rear right warning, active: 0 = inactive; 1 = active / Harte Warnung hinten rechts, aktiv: 0 = inaktiv ;
|
|
// 1 = aktiv
|
|
|
|
#define I3_RES_DSC_STAT_KL_15_EIN (RXBUF_UCHAR(17))
|
|
#define I3_RES_DSC_STAT_KL_15_EIN_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_KL_15_EIN_TYPE unsigned char
|
|
// Terminal 15 ON: 0 = OFF, 1 = ON / Klemme 15 EIN : 0 = AUS, 1 = EIN
|
|
|
|
#define I3_RES_DSC_STAT_MOTOR_LAEUFT_EIN (RXBUF_UCHAR(18))
|
|
#define I3_RES_DSC_STAT_MOTOR_LAEUFT_EIN_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_MOTOR_LAEUFT_EIN_TYPE unsigned char
|
|
// Engine running: 0 = off; 1 = ON / Motor läuft : 0 = Aus ; 1 = EIN
|
|
|
|
#define I3_RES_DSC_STAT_FZG_FAEHRT (RXBUF_UCHAR(19))
|
|
#define I3_RES_DSC_STAT_FZG_FAEHRT_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_FZG_FAEHRT_TYPE unsigned char
|
|
// Signal vehicle is moving: 0 = stationary, 1 = moving / Signal Fahrzeug fährt : 0 = steht , 1 = fährt
|
|
|
|
#define I3_RES_DSC_STAT_ERKENNUNG_ALLE_RE (RXBUF_UCHAR(20))
|
|
#define I3_RES_DSC_STAT_ERKENNUNG_ALLE_RE_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ERKENNUNG_ALLE_RE_TYPE unsigned char
|
|
// All wheel electronics recognized: 0 = not recognized 1 = recognized / Alle Radelektroniken erkannt : 0 = nicht
|
|
// erkannt 1 = erkannt
|
|
|
|
#define I3_RES_DSC_STAT_ERKENNUNG_ZUVIELE_RE (RXBUF_UCHAR(21))
|
|
#define I3_RES_DSC_STAT_ERKENNUNG_ZUVIELE_RE_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ERKENNUNG_ZUVIELE_RE_TYPE unsigned char
|
|
// Too many wheel electronics recognized: 0 = not recognized, 1 = recognized / Zu viele Radelektroniken erkannt :
|
|
// 0 = nicht erkannt , 1 = erkannt
|
|
|
|
#define I3_RES_DSC_STAT_STOERSENDER (RXBUF_UCHAR(22))
|
|
#define I3_RES_DSC_STAT_STOERSENDER_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_STOERSENDER_TYPE unsigned char
|
|
// Radio interference present: 0 = inactive, 1 = active / Funkstoerung vorhanden : 0 = inaktiv , 1 = aktiv
|
|
|
|
#define I3_RES_DSC_STAT_FREQUENZ_WERT (RXBUF_UINT(23))
|
|
#define I3_RES_DSC_STAT_FREQUENZ_WERT_UNIT 'MHz'
|
|
#define I3_RES_DSC_STAT_FREQUENZ_WERT_TYPE unsigned short
|
|
// Returns the current RF frequency. The frequency depends on the coding. (315 or 433). Specification in MHz /
|
|
// Gibt die aktuelle RF-Frequenz zurück. Die Frequenz ist abhaengig von der Codierung. (315 oder 433). Angabe in
|
|
// MHz
|
|
|
|
#define I3_PID_DSC_RDC_HS_INAKTIVEREIGNIS 0xDC96
|
|
// RDC_HS_INAKTIVEREIGNIS / RDC_HS_INAKTIVEREIGNIS
|
|
|
|
// Can't yet generate code for STAT_1_DATUM_TEXT of type string[9], at offset 0. But we account for the 9 bytes
|
|
// Date of the inactive event. 99.99.99 => invalid / Datum zum Inaktivereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_1_UHRZEIT_TEXT of type string[9], at offset 9. But we account for the 9 bytes
|
|
// Time of the inactive event. 99.99.99 => invalid / Uhrzeit zum Inaktivereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_1_KILOMETERSTAND_WERT (RXBUF_SINT32(18))
|
|
#define I3_RES_DSC_STAT_1_KILOMETERSTAND_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_1_KILOMETERSTAND_WERT_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_1_SYSTEMFLAGS_WERT (RXBUF_UINT32(22))
|
|
#define I3_RES_DSC_STAT_1_SYSTEMFLAGS_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_1_SYSTEMFLAGS_WERT_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_1_INTERNER_FEHLERCODE_WERT (RXBUF_UINT(26))
|
|
#define I3_RES_DSC_STAT_1_INTERNER_FEHLERCODE_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_1_INTERNER_FEHLERCODE_WERT_TYPE unsigned short
|
|
// SG internal error code / SG-interner Fehlercode
|
|
|
|
#define I3_RES_DSC_STAT_1_ZAEHLER_INAKTIV (RXBUF_UCHAR(28))
|
|
#define I3_RES_DSC_STAT_1_ZAEHLER_INAKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_1_ZAEHLER_INAKTIV_TYPE unsigned char
|
|
// Counter for inactive events / Zähler für Inaktiv-Ereignisse
|
|
|
|
// Can't yet generate code for STAT_2_DATUM_TEXT of type string[9], at offset 29. But we account for the 9 bytes
|
|
// Date of the inactive event. 99.99.99 => invalid / Datum zum Inaktivereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_2_UHRZEIT_TEXT of type string[9], at offset 38. But we account for the 9 bytes
|
|
// Time of the inactive event. 99.99.99 => invalid / Uhrzeit zum Inaktivereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_2_KILOMETERSTAND_WERT (RXBUF_SINT32(47))
|
|
#define I3_RES_DSC_STAT_2_KILOMETERSTAND_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_2_KILOMETERSTAND_WERT_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_2_SYSTEMFLAGS_WERT (RXBUF_UINT32(51))
|
|
#define I3_RES_DSC_STAT_2_SYSTEMFLAGS_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_2_SYSTEMFLAGS_WERT_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_2_INTERNER_FEHLERCODE_WERT (RXBUF_UINT(55))
|
|
#define I3_RES_DSC_STAT_2_INTERNER_FEHLERCODE_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_2_INTERNER_FEHLERCODE_WERT_TYPE unsigned short
|
|
// SG internal error code / SG-interner Fehlercode
|
|
|
|
#define I3_RES_DSC_STAT_2_ZAEHLER_INAKTIV (RXBUF_UCHAR(57))
|
|
#define I3_RES_DSC_STAT_2_ZAEHLER_INAKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_2_ZAEHLER_INAKTIV_TYPE unsigned char
|
|
// Counter for inactive events / Zähler für Inaktiv-Ereignisse
|
|
|
|
// Can't yet generate code for STAT_3_DATUM_TEXT of type string[9], at offset 58. But we account for the 9 bytes
|
|
// Date of the inactive event. 99.99.99 => invalid / Datum zum Inaktivereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_3_UHRZEIT_TEXT of type string[9], at offset 67. But we account for the 9 bytes
|
|
// Time of the inactive event. 99.99.99 => invalid / Uhrzeit zum Inaktivereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_3_KILOMETERSTAND_WERT (RXBUF_SINT32(76))
|
|
#define I3_RES_DSC_STAT_3_KILOMETERSTAND_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_3_KILOMETERSTAND_WERT_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_3_SYSTEMFLAGS_WERT (RXBUF_UINT32(80))
|
|
#define I3_RES_DSC_STAT_3_SYSTEMFLAGS_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_3_SYSTEMFLAGS_WERT_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_3_INTERNER_FEHLERCODE_WERT (RXBUF_UINT(84))
|
|
#define I3_RES_DSC_STAT_3_INTERNER_FEHLERCODE_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_3_INTERNER_FEHLERCODE_WERT_TYPE unsigned short
|
|
// SG internal error code / SG-interner Fehlercode
|
|
|
|
#define I3_RES_DSC_STAT_3_ZAEHLER_INAKTIV (RXBUF_UCHAR(86))
|
|
#define I3_RES_DSC_STAT_3_ZAEHLER_INAKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_3_ZAEHLER_INAKTIV_TYPE unsigned char
|
|
// Counter for inactive events / Zähler für Inaktiv-Ereignisse
|
|
|
|
#define I3_PID_DSC_RDC_HS_KALIBRIEREREIGNIS 0xDC97
|
|
// RDC_HS_KALIBRIEREREIGNIS / RDC_HS_KALIBRIEREREIGNIS
|
|
|
|
#define I3_RES_DSC_STAT_1_PLAUSI_DRUCK (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_1_PLAUSI_DRUCK_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_1_PLAUSI_DRUCK_TYPE unsigned char
|
|
// Filled pressures passed yes or no / Eingefüllte Drücke bestanden ja oder nein
|
|
|
|
#define I3_RES_DSC_STAT_1_KALIBRIERUNG (RXBUF_UCHAR(1))
|
|
#define I3_RES_DSC_STAT_1_KALIBRIERUNG_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_1_KALIBRIERUNG_TYPE unsigned char
|
|
// Status byte about success / failure of calibration / Statusbyte über Erfolg- Misserfolg der Kalibrierung
|
|
|
|
// Can't yet generate code for STAT_1_DATUM_TEXT_0XDC97 of type string[9], at offset 2. But we account for the 9 bytes
|
|
// Date of the calibration event. 99.99.99 => invalid / Datum zum Kalibrierereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_1_UHRZEIT_TEXT_0XDC97 of type string[9], at offset 11. But we account for the 9 bytes
|
|
// Time of the calibration event. 99.99.99 => invalid / Uhrzeit zum Kalibrierereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_1_KILOMETERSTAND_WERT_0XDC97 (RXBUF_SINT32(20))
|
|
#define I3_RES_DSC_STAT_1_KILOMETERSTAND_WERT_0XDC97_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_1_KILOMETERSTAND_WERT_0XDC97_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_1_SYSTEMFLAGS_WERT_0XDC97 (RXBUF_UINT32(24))
|
|
#define I3_RES_DSC_STAT_1_SYSTEMFLAGS_WERT_0XDC97_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_1_SYSTEMFLAGS_WERT_0XDC97_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_1_BEFUELL_AUSSENTEMPERATUR_WERT (RXBUF_SCHAR(28))
|
|
#define I3_RES_DSC_STAT_1_BEFUELL_AUSSENTEMPERATUR_WERT_UNIT '°'
|
|
#define I3_RES_DSC_STAT_1_BEFUELL_AUSSENTEMPERATUR_WERT_TYPE char
|
|
// Outside temperature when filling / Aussentemperatur beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_1_BEFUELL_AUSSENDRUCK_WERT (RXBUF_SINT(29)/1000.0f)
|
|
#define I3_RES_DSC_STAT_1_BEFUELL_AUSSENDRUCK_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_1_BEFUELL_AUSSENDRUCK_WERT_TYPE float
|
|
// External pressure when filling / Aussendruck beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_1_RADPOSITION_RE0 (RXBUF_UCHAR(31))
|
|
#define I3_RES_DSC_STAT_1_RADPOSITION_RE0_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_1_RADPOSITION_RE0_TYPE unsigned char
|
|
// Wheel position wheel electronics RE0 / Radposition Radelektronik RE0
|
|
|
|
#define I3_RES_DSC_STAT_1_BEFUELLDRUCK_RE0_WERT (RXBUF_SINT(32)/1000.0f)
|
|
#define I3_RES_DSC_STAT_1_BEFUELLDRUCK_RE0_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_1_BEFUELLDRUCK_RE0_WERT_TYPE float
|
|
// Filling pressure value wheel electronics RE0 (-9,999 bar => invalid) / Befuelldruckwert Radelektronik RE0
|
|
// (-9.999 bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_1_BEFUELLTEMPERATUR_RE0_WERT (RXBUF_SCHAR(34))
|
|
#define I3_RES_DSC_STAT_1_BEFUELLTEMPERATUR_RE0_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_1_BEFUELLTEMPERATUR_RE0_WERT_TYPE char
|
|
// Filling temperature value wheel electronics RE0 (-99 ° C => invalid) / Befuelltemperaturwert Radelektronik RE0
|
|
// (-99 °C => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_1_RADPOSITION_RE1 (RXBUF_UCHAR(35))
|
|
#define I3_RES_DSC_STAT_1_RADPOSITION_RE1_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_1_RADPOSITION_RE1_TYPE unsigned char
|
|
// Wheel position wheel electronics RE1 / Radposition Radelektronik RE1
|
|
|
|
#define I3_RES_DSC_STAT_1_BEFUELLDRUCK_RE1_WERT (RXBUF_SINT(36)/1000.0f)
|
|
#define I3_RES_DSC_STAT_1_BEFUELLDRUCK_RE1_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_1_BEFUELLDRUCK_RE1_WERT_TYPE float
|
|
// Filling pressure value wheel electronics RE1 (-9,999 bar => invalid) / Befuelldruckwert Radelektronik RE1
|
|
// (-9.999 bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_1_BEFUELLTEMPERATUR_RE1_WERT (RXBUF_SCHAR(38))
|
|
#define I3_RES_DSC_STAT_1_BEFUELLTEMPERATUR_RE1_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_1_BEFUELLTEMPERATUR_RE1_WERT_TYPE char
|
|
// Filling temperature value wheel electronics RE1 (-99 ° C => invalid) / Befuelltemperaturwert Radelektronik RE1
|
|
// (-99 °C => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_1_RADPOSITION_RE2 (RXBUF_UCHAR(39))
|
|
#define I3_RES_DSC_STAT_1_RADPOSITION_RE2_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_1_RADPOSITION_RE2_TYPE unsigned char
|
|
// Wheel position wheel electronics RE2 / Radposition Radelektronik RE2
|
|
|
|
#define I3_RES_DSC_STAT_1_BEFUELLDRUCK_RE2_WERT (RXBUF_SINT(40)/1000.0f)
|
|
#define I3_RES_DSC_STAT_1_BEFUELLDRUCK_RE2_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_1_BEFUELLDRUCK_RE2_WERT_TYPE float
|
|
// Filling pressure value wheel electronics RE2 (-9,999 bar => invalid) / Befuelldruckwert Radelektronik RE2
|
|
// (-9.999 bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_1_BEFUELLTEMPERATUR_RE2_WERT (RXBUF_SCHAR(42))
|
|
#define I3_RES_DSC_STAT_1_BEFUELLTEMPERATUR_RE2_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_1_BEFUELLTEMPERATUR_RE2_WERT_TYPE char
|
|
// Filling temperature value wheel electronics RE2 (-99 ° C => invalid) / Befuelltemperaturwert Radelektronik RE2
|
|
// (-99 °C => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_1_RADPOSITION_RE3 (RXBUF_UCHAR(43))
|
|
#define I3_RES_DSC_STAT_1_RADPOSITION_RE3_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_1_RADPOSITION_RE3_TYPE unsigned char
|
|
// Wheel position wheel electronics RE3 / Radposition Radelektronik RE3
|
|
|
|
#define I3_RES_DSC_STAT_1_BEFUELLDRUCK_RE3_WERT (RXBUF_SINT(44)/1000.0f)
|
|
#define I3_RES_DSC_STAT_1_BEFUELLDRUCK_RE3_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_1_BEFUELLDRUCK_RE3_WERT_TYPE float
|
|
// Filling pressure value wheel electronics RE3 (-9,999 bar => invalid) / Befuelldruckwert Radelektronik RE3
|
|
// (-9.999 bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_1_BEFUELLTEMPERATUR_RE3_WERT (RXBUF_SCHAR(46))
|
|
#define I3_RES_DSC_STAT_1_BEFUELLTEMPERATUR_RE3_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_1_BEFUELLTEMPERATUR_RE3_WERT_TYPE char
|
|
// Filling temperature value wheel electronics RE3 (-99 ° C => invalid) / Befuelltemperaturwert Radelektronik RE3
|
|
// (-99 °C => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_1_ZAEHLER_KALIBRIERUNG (RXBUF_UCHAR(47))
|
|
#define I3_RES_DSC_STAT_1_ZAEHLER_KALIBRIERUNG_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_1_ZAEHLER_KALIBRIERUNG_TYPE unsigned char
|
|
// Calibration event counter / Zähler für Kalibrierereignisse
|
|
|
|
#define I3_RES_DSC_STAT_2_PLAUSI_DRUCK (RXBUF_UCHAR(48))
|
|
#define I3_RES_DSC_STAT_2_PLAUSI_DRUCK_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_2_PLAUSI_DRUCK_TYPE unsigned char
|
|
// Filled pressures passed yes or no / Eingefüllte Drücke bestanden ja oder nein
|
|
|
|
#define I3_RES_DSC_STAT_2_KALIBRIERUNG (RXBUF_UCHAR(49))
|
|
#define I3_RES_DSC_STAT_2_KALIBRIERUNG_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_2_KALIBRIERUNG_TYPE unsigned char
|
|
// Status byte about success / failure of calibration / Statusbyte über Erfolg- Misserfolg der Kalibrierung
|
|
|
|
// Can't yet generate code for STAT_2_DATUM_TEXT_0XDC97 of type string[9], at offset 50. But we account for the 9 bytes
|
|
// Date of the calibration event. 99.99.99 => invalid / Datum zum Kalibrierereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_2_UHRZEIT_TEXT_0XDC97 of type string[9], at offset 59. But we account for the 9 bytes
|
|
// Time of the calibration event. 99.99.99 => invalid / Uhrzeit zum Kalibrierereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_2_KILOMETERSTAND_WERT_0XDC97 (RXBUF_SINT32(68))
|
|
#define I3_RES_DSC_STAT_2_KILOMETERSTAND_WERT_0XDC97_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_2_KILOMETERSTAND_WERT_0XDC97_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_2_SYSTEMFLAGS_WERT_0XDC97 (RXBUF_UINT32(72))
|
|
#define I3_RES_DSC_STAT_2_SYSTEMFLAGS_WERT_0XDC97_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_2_SYSTEMFLAGS_WERT_0XDC97_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_2_BEFUELL_AUSSENTEMPERATUR_WERT (RXBUF_SCHAR(76))
|
|
#define I3_RES_DSC_STAT_2_BEFUELL_AUSSENTEMPERATUR_WERT_UNIT '°'
|
|
#define I3_RES_DSC_STAT_2_BEFUELL_AUSSENTEMPERATUR_WERT_TYPE char
|
|
// Outside temperature when filling / Aussentemperatur beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_2_BEFUELL_AUSSENDRUCK_WERT (RXBUF_SINT(77)/1000.0f)
|
|
#define I3_RES_DSC_STAT_2_BEFUELL_AUSSENDRUCK_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_2_BEFUELL_AUSSENDRUCK_WERT_TYPE float
|
|
// External pressure when filling / Aussendruck beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_2_RADPOSITION_RE0 (RXBUF_UCHAR(79))
|
|
#define I3_RES_DSC_STAT_2_RADPOSITION_RE0_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_2_RADPOSITION_RE0_TYPE unsigned char
|
|
// Wheel position wheel electronics RE0 / Radposition Radelektronik RE0
|
|
|
|
#define I3_RES_DSC_STAT_2_BEFUELLDRUCK_RE0_WERT (RXBUF_SINT(80)/1000.0f)
|
|
#define I3_RES_DSC_STAT_2_BEFUELLDRUCK_RE0_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_2_BEFUELLDRUCK_RE0_WERT_TYPE float
|
|
// Filling pressure value wheel electronics RE0 (-9,999 bar => invalid) / Befuelldruckwert Radelektronik RE0
|
|
// (-9.999 bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_2_BEFUELLTEMPERATUR_RE0_WERT (RXBUF_SCHAR(82))
|
|
#define I3_RES_DSC_STAT_2_BEFUELLTEMPERATUR_RE0_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_2_BEFUELLTEMPERATUR_RE0_WERT_TYPE char
|
|
// Filling temperature value wheel electronics RE0 (-99 ° C => invalid) / Befuelltemperaturwert Radelektronik RE0
|
|
// (-99 °C => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_2_RADPOSITION_RE1 (RXBUF_UCHAR(83))
|
|
#define I3_RES_DSC_STAT_2_RADPOSITION_RE1_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_2_RADPOSITION_RE1_TYPE unsigned char
|
|
// Wheel position wheel electronics RE1 / Radposition Radelektronik RE1
|
|
|
|
#define I3_RES_DSC_STAT_2_BEFUELLDRUCK_RE1_WERT (RXBUF_SINT(84)/1000.0f)
|
|
#define I3_RES_DSC_STAT_2_BEFUELLDRUCK_RE1_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_2_BEFUELLDRUCK_RE1_WERT_TYPE float
|
|
// Filling pressure value wheel electronics RE1 (-9,999 bar => invalid) / Befuelldruckwert Radelektronik RE1
|
|
// (-9.999 bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_2_BEFUELLTEMPERATUR_RE1_WERT (RXBUF_SCHAR(86))
|
|
#define I3_RES_DSC_STAT_2_BEFUELLTEMPERATUR_RE1_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_2_BEFUELLTEMPERATUR_RE1_WERT_TYPE char
|
|
// Filling temperature value wheel electronics RE1 (-99 ° C => invalid) / Befuelltemperaturwert Radelektronik RE1
|
|
// (-99 °C => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_2_RADPOSITION_RE2 (RXBUF_UCHAR(87))
|
|
#define I3_RES_DSC_STAT_2_RADPOSITION_RE2_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_2_RADPOSITION_RE2_TYPE unsigned char
|
|
// Wheel position wheel electronics RE2 / Radposition Radelektronik RE2
|
|
|
|
#define I3_RES_DSC_STAT_2_BEFUELLDRUCK_RE2_WERT (RXBUF_SINT(88)/1000.0f)
|
|
#define I3_RES_DSC_STAT_2_BEFUELLDRUCK_RE2_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_2_BEFUELLDRUCK_RE2_WERT_TYPE float
|
|
// Filling pressure value wheel electronics RE2 (-9,999 bar => invalid) / Befuelldruckwert Radelektronik RE2
|
|
// (-9.999 bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_2_BEFUELLTEMPERATUR_RE2_WERT (RXBUF_SCHAR(90))
|
|
#define I3_RES_DSC_STAT_2_BEFUELLTEMPERATUR_RE2_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_2_BEFUELLTEMPERATUR_RE2_WERT_TYPE char
|
|
// Filling temperature value wheel electronics RE2 (-99 ° C => invalid) / Befuelltemperaturwert Radelektronik RE2
|
|
// (-99 °C => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_2_RADPOSITION_RE3 (RXBUF_UCHAR(91))
|
|
#define I3_RES_DSC_STAT_2_RADPOSITION_RE3_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_2_RADPOSITION_RE3_TYPE unsigned char
|
|
// Wheel position wheel electronics RE3 / Radposition Radelektronik RE3
|
|
|
|
#define I3_RES_DSC_STAT_2_BEFUELLDRUCK_RE3_WERT (RXBUF_SINT(92)/1000.0f)
|
|
#define I3_RES_DSC_STAT_2_BEFUELLDRUCK_RE3_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_2_BEFUELLDRUCK_RE3_WERT_TYPE float
|
|
// Filling pressure value wheel electronics RE3 (-9,999 bar => invalid) / Befuelldruckwert Radelektronik RE3
|
|
// (-9.999 bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_2_BEFUELLTEMPERATUR_RE3_WERT (RXBUF_SCHAR(94))
|
|
#define I3_RES_DSC_STAT_2_BEFUELLTEMPERATUR_RE3_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_2_BEFUELLTEMPERATUR_RE3_WERT_TYPE char
|
|
// Filling temperature value wheel electronics RE3 (-99 ° C => invalid) / Befuelltemperaturwert Radelektronik RE3
|
|
// (-99 °C => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_2_ZAEHLER_KALIBRIERUNG (RXBUF_UCHAR(95))
|
|
#define I3_RES_DSC_STAT_2_ZAEHLER_KALIBRIERUNG_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_2_ZAEHLER_KALIBRIERUNG_TYPE unsigned char
|
|
// Calibration event counter / Zähler für Kalibrierereignisse
|
|
|
|
#define I3_RES_DSC_STAT_3_PLAUSI_DRUCK (RXBUF_UCHAR(96))
|
|
#define I3_RES_DSC_STAT_3_PLAUSI_DRUCK_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_3_PLAUSI_DRUCK_TYPE unsigned char
|
|
// Filled pressures passed yes or no / Eingefüllte Drücke bestanden ja oder nein
|
|
|
|
#define I3_RES_DSC_STAT_3_KALIBRIERUNG (RXBUF_UCHAR(97))
|
|
#define I3_RES_DSC_STAT_3_KALIBRIERUNG_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_3_KALIBRIERUNG_TYPE unsigned char
|
|
// Status byte about success / failure of calibration / Statusbyte über Erfolg- Misserfolg der Kalibrierung
|
|
|
|
// Can't yet generate code for STAT_3_DATUM_TEXT_0XDC97 of type string[9], at offset 98. But we account for the 9 bytes
|
|
// Date of the calibration event. 99.99.99 => invalid / Datum zum Kalibrierereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_3_UHRZEIT_TEXT_0XDC97 of type string[9], at offset 107. But we account for the 9 bytes
|
|
// Time of the calibration event. 99.99.99 => invalid / Uhrzeit zum Kalibrierereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_3_KILOMETERSTAND_WERT_0XDC97 (RXBUF_SINT32(116))
|
|
#define I3_RES_DSC_STAT_3_KILOMETERSTAND_WERT_0XDC97_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_3_KILOMETERSTAND_WERT_0XDC97_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_3_SYSTEMFLAGS_WERT_0XDC97 (RXBUF_UINT32(120))
|
|
#define I3_RES_DSC_STAT_3_SYSTEMFLAGS_WERT_0XDC97_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_3_SYSTEMFLAGS_WERT_0XDC97_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_3_BEFUELL_AUSSENTEMPERATUR_WERT (RXBUF_SCHAR(124))
|
|
#define I3_RES_DSC_STAT_3_BEFUELL_AUSSENTEMPERATUR_WERT_UNIT '°'
|
|
#define I3_RES_DSC_STAT_3_BEFUELL_AUSSENTEMPERATUR_WERT_TYPE char
|
|
// Outside temperature when filling / Aussentemperatur beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_3_BEFUELL_AUSSENDRUCK_WERT (RXBUF_SINT(125)/1000.0f)
|
|
#define I3_RES_DSC_STAT_3_BEFUELL_AUSSENDRUCK_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_3_BEFUELL_AUSSENDRUCK_WERT_TYPE float
|
|
// External pressure when filling / Aussendruck beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_3_RADPOSITION_RE0 (RXBUF_UCHAR(127))
|
|
#define I3_RES_DSC_STAT_3_RADPOSITION_RE0_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_3_RADPOSITION_RE0_TYPE unsigned char
|
|
// Wheel position wheel electronics RE0 / Radposition Radelektronik RE0
|
|
|
|
#define I3_RES_DSC_STAT_3_BEFUELLDRUCK_RE0_WERT (RXBUF_SINT(128)/1000.0f)
|
|
#define I3_RES_DSC_STAT_3_BEFUELLDRUCK_RE0_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_3_BEFUELLDRUCK_RE0_WERT_TYPE float
|
|
// Filling pressure value wheel electronics RE0 (-9,999 bar => invalid) / Befuelldruckwert Radelektronik RE0
|
|
// (-9.999 bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_3_BEFUELLTEMPERATUR_RE0_WERT (RXBUF_SCHAR(130))
|
|
#define I3_RES_DSC_STAT_3_BEFUELLTEMPERATUR_RE0_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_3_BEFUELLTEMPERATUR_RE0_WERT_TYPE char
|
|
// Filling temperature value wheel electronics RE0 (-99 ° C => invalid) / Befuelltemperaturwert Radelektronik RE0
|
|
// (-99 °C => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_3_RADPOSITION_RE1 (RXBUF_UCHAR(131))
|
|
#define I3_RES_DSC_STAT_3_RADPOSITION_RE1_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_3_RADPOSITION_RE1_TYPE unsigned char
|
|
// Wheel position wheel electronics RE1 / Radposition Radelektronik RE1
|
|
|
|
#define I3_RES_DSC_STAT_3_BEFUELLDRUCK_RE1_WERT (RXBUF_SINT(132)/1000.0f)
|
|
#define I3_RES_DSC_STAT_3_BEFUELLDRUCK_RE1_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_3_BEFUELLDRUCK_RE1_WERT_TYPE float
|
|
// Filling pressure value wheel electronics RE1 (-9,999 bar => invalid) / Befuelldruckwert Radelektronik RE1
|
|
// (-9.999 bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_3_BEFUELLTEMPERATUR_RE1_WERT (RXBUF_SCHAR(134))
|
|
#define I3_RES_DSC_STAT_3_BEFUELLTEMPERATUR_RE1_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_3_BEFUELLTEMPERATUR_RE1_WERT_TYPE char
|
|
// Filling temperature value wheel electronics RE1 (-99 ° C => invalid) / Befuelltemperaturwert Radelektronik RE1
|
|
// (-99 °C => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_3_RADPOSITION_RE2 (RXBUF_UCHAR(135))
|
|
#define I3_RES_DSC_STAT_3_RADPOSITION_RE2_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_3_RADPOSITION_RE2_TYPE unsigned char
|
|
// Wheel position wheel electronics RE2 / Radposition Radelektronik RE2
|
|
|
|
#define I3_RES_DSC_STAT_3_BEFUELLDRUCK_RE2_WERT (RXBUF_SINT(136)/1000.0f)
|
|
#define I3_RES_DSC_STAT_3_BEFUELLDRUCK_RE2_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_3_BEFUELLDRUCK_RE2_WERT_TYPE float
|
|
// Filling pressure value wheel electronics RE2 (-9,999 bar => invalid) / Befuelldruckwert Radelektronik RE2
|
|
// (-9.999 bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_3_BEFUELLTEMPERATUR_RE2_WERT (RXBUF_SCHAR(138))
|
|
#define I3_RES_DSC_STAT_3_BEFUELLTEMPERATUR_RE2_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_3_BEFUELLTEMPERATUR_RE2_WERT_TYPE char
|
|
// Filling temperature value wheel electronics RE2 (-99 ° C => invalid) / Befuelltemperaturwert Radelektronik RE2
|
|
// (-99 °C => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_3_RADPOSITION_RE3 (RXBUF_UCHAR(139))
|
|
#define I3_RES_DSC_STAT_3_RADPOSITION_RE3_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_3_RADPOSITION_RE3_TYPE unsigned char
|
|
// Wheel position wheel electronics RE3 / Radposition Radelektronik RE3
|
|
|
|
#define I3_RES_DSC_STAT_3_BEFUELLDRUCK_RE3_WERT (RXBUF_SINT(140)/1000.0f)
|
|
#define I3_RES_DSC_STAT_3_BEFUELLDRUCK_RE3_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_3_BEFUELLDRUCK_RE3_WERT_TYPE float
|
|
// Filling pressure value wheel electronics RE3 (-9,999 bar => invalid) / Befuelldruckwert Radelektronik RE3
|
|
// (-9.999 bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_3_BEFUELLTEMPERATUR_RE3_WERT (RXBUF_SCHAR(142))
|
|
#define I3_RES_DSC_STAT_3_BEFUELLTEMPERATUR_RE3_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_3_BEFUELLTEMPERATUR_RE3_WERT_TYPE char
|
|
// Filling temperature value wheel electronics RE3 (-99 ° C => invalid) / Befuelltemperaturwert Radelektronik RE3
|
|
// (-99 °C => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_3_ZAEHLER_KALIBRIERUNG (RXBUF_UCHAR(143))
|
|
#define I3_RES_DSC_STAT_3_ZAEHLER_KALIBRIERUNG_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_3_ZAEHLER_KALIBRIERUNG_TYPE unsigned char
|
|
// Calibration event counter / Zähler für Kalibrierereignisse
|
|
|
|
#define I3_PID_DSC_RDC_MESSDATENBLOCK_1 0xDC98
|
|
// RDC_MESSDATENBLOCK_1 / RDC_MESSDATENBLOCK_1
|
|
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER (RXBUF_UINT32(0))
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_TYPE unsigned long
|
|
// Wheel electronics identifier / Radelektronik Identifier
|
|
|
|
#define I3_RES_DSC_STAT_RAD_POSITION_NR (RXBUF_UCHAR(4))
|
|
#define I3_RES_DSC_STAT_RAD_POSITION_NR_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RAD_POSITION_NR_TYPE unsigned char
|
|
// The read out wheel position of the identifier (measuring block) was assigned to the respective position by the
|
|
// SG. Position of the wheel electronics: 0 = front left, 1 = front right, 2 = rear left, 3 = rear right /
|
|
// Ausgelesene Radposition des Identifiers (Messblock) wurde vom SG der jeweiligen Position zugewiesen. Position
|
|
// der Radelektronik: 0 = vorne links, 1 = vorne rechts, 2 = hinten links, 3 = hinten rechts
|
|
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENDRUCKWERT_WERT (RXBUF_SINT(5)/1000.0f)
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENDRUCKWERT_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENDRUCKWERT_WERT_TYPE float
|
|
// Last valid tire pressure value returned by the selected wheel / Letzer gültiger Reifendruckwert der vom
|
|
// ausgewählten Rad zurückgeliefert wird
|
|
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENTEMPERATURWERT_WERT (RXBUF_SCHAR(7))
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENTEMPERATURWERT_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENTEMPERATURWERT_WERT_TYPE char
|
|
// Last valid tire temperature of the selected wheel / Letzte gültige Reifentemperatur des ausgewählten Rads
|
|
|
|
#define I3_RES_DSC_STAT_SOLLDRUCK_WERT (RXBUF_SINT(8)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SOLLDRUCK_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_SOLLDRUCK_WERT_TYPE float
|
|
// Predefined target pressure of the selected wheel / Vorgegebener Solldruck des ausgewählten Rads
|
|
|
|
#define I3_RES_DSC_STAT_GUTEMPFAENGE (RXBUF_UINT(10))
|
|
#define I3_RES_DSC_STAT_GUTEMPFAENGE_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_GUTEMPFAENGE_TYPE unsigned short
|
|
// Number of correctly received telegrams from the selected bike / Anzahl korrekt empfangener Telegramme vom
|
|
// ausgewählten Rad
|
|
|
|
#define I3_RES_DSC_STAT_AUSBEUTE (RXBUF_UCHAR(12))
|
|
#define I3_RES_DSC_STAT_AUSBEUTE_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_AUSBEUTE_TYPE unsigned char
|
|
// Telegram yield from the selected bike in percent / Telegrammausbeute vom ausgewählten Rad in Prozent
|
|
|
|
#define I3_RES_DSC_STAT_RSSI_PEGEL (RXBUF_UINT(13))
|
|
#define I3_RES_DSC_STAT_RSSI_PEGEL_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RSSI_PEGEL_TYPE unsigned short
|
|
// RSSI - level of the ID [unit: AD converter units] / RSSI - Pegel der ID [Einheit: AD Wandler-Einheiten]
|
|
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER (RXBUF_UINT(15))
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_TYPE unsigned short
|
|
// Remaining battery life on the wheel sensor in months / Verbleibende Restlebensdauer der Batterie am Radsensor
|
|
// in Monaten
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS (RXBUF_UCHAR(17))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_TYPE unsigned char
|
|
// Status message from the wheel electronics of the selected wheel. / Status Meldung der Radelektronik des
|
|
// angewählten Rads.
|
|
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_AKTIV (RXBUF_UCHAR(18))
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_AKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_AKTIV_TYPE unsigned char
|
|
// Breakdown warning from the selected bike, 0 = inactive, 1 = active, FF = signal unknown / Pannen Warnung vom
|
|
// angewählten Rad, 0= Inaktiv, 1 = aktiv, FF = Signal unbekannt
|
|
|
|
#define I3_RES_DSC_STAT_POS_CHANGED (RXBUF_UCHAR(19))
|
|
#define I3_RES_DSC_STAT_POS_CHANGED_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_POS_CHANGED_TYPE unsigned char
|
|
// Wheel electronics ID of the selected wheel has changed, 0 = not changed, 1 = changed, FF = signal unknown /
|
|
// Radelektronik ID vom angewählten Rad hat sich geändert, 0 = nicht geändert, 1 = geändert, FF= Signal unbekannt
|
|
|
|
#define I3_RES_DSC_STAT_RE_OVERHEAT_AKTIV (RXBUF_UCHAR(20))
|
|
#define I3_RES_DSC_STAT_RE_OVERHEAT_AKTIV_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RE_OVERHEAT_AKTIV_TYPE unsigned char
|
|
// Overheating message from the wheel electronics of the selected wheel, 0 = inactive, 1 = active, FF = signal
|
|
// unknown / Überhitzungsmeldung der Radelektronik vom angewählten Rad, 0 = Inaktiv, 1 = aktiv, FF = Signal
|
|
// unbekannt
|
|
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG (RXBUF_UCHAR(21))
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_TYPE unsigned char
|
|
// Direction of rotation of the wheel 0 = standstill 1 = right 2 = left 3 = unknown 255 = not defined /
|
|
// Drehrichtung des Rades 0=Stillstand 1=rechts 2=links 3=unbekannt 255=nicht definiert
|
|
|
|
#define I3_RES_DSC_STAT_FOLGEAUSFALL (RXBUF_UCHAR(22))
|
|
#define I3_RES_DSC_STAT_FOLGEAUSFALL_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_FOLGEAUSFALL_TYPE unsigned char
|
|
// Number of time intervals (typically 60s) since the last telegram was received / Anzahl Zeitintervalle (typ.
|
|
// 60s) seit letztem Telegrammempfang
|
|
|
|
#define I3_RES_DSC_STAT_RE_HERSTELLER (RXBUF_UCHAR(23))
|
|
#define I3_RES_DSC_STAT_RE_HERSTELLER_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RE_HERSTELLER_TYPE unsigned char
|
|
// RE manufacturer / RE-Hersteller
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_SENDEMODE (RXBUF_UCHAR(24))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_SENDEMODE_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_SENDEMODE_TYPE unsigned char
|
|
// Transmission mode of the wheel electronics / Sendemode der Radelektronik
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_FEHLER_WERT (RXBUF_UINT(25))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_FEHLER_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_FEHLER_WERT_TYPE unsigned short
|
|
// Error code wheel electronics / Fehlercode Radelektronik
|
|
|
|
#define I3_RES_DSC_STAT_ROLLSWITCH (RXBUF_UCHAR(27))
|
|
#define I3_RES_DSC_STAT_ROLLSWITCH_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ROLLSWITCH_TYPE unsigned char
|
|
// Status Rollswitch / Status Rollswitch
|
|
|
|
#define I3_RES_DSC_STAT_TELEGRAMMTYP (RXBUF_UCHAR(28))
|
|
#define I3_RES_DSC_STAT_TELEGRAMMTYP_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_TELEGRAMMTYP_TYPE unsigned char
|
|
// Telegram type / Telegrammtyp
|
|
|
|
#define I3_PID_DSC_RDC_MESSDATENBLOCK_2 0xDC99
|
|
// RDC_MESSDATENBLOCK_2 / RDC_MESSDATENBLOCK_2
|
|
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_0XDC99 (RXBUF_UINT32(0))
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_0XDC99_TYPE unsigned long
|
|
// Wheel electronics identifier / Radelektronik Identifier
|
|
|
|
#define I3_RES_DSC_STAT_RAD_POSITION_NR_0XDC99 (RXBUF_UCHAR(4))
|
|
#define I3_RES_DSC_STAT_RAD_POSITION_NR_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RAD_POSITION_NR_0XDC99_TYPE unsigned char
|
|
// The read out wheel position of the identifier (measuring block) was assigned to the respective position by the
|
|
// SG. Position of the wheel electronics: 0 = front left, 1 = front right, 2 = rear left, 3 = rear right /
|
|
// Ausgelesene Radposition des Identifiers (Messblock) wurde vom SG der jeweiligen Position zugewiesen. Position
|
|
// der Radelektronik: 0 = vorne links, 1 = vorne rechts, 2 = hinten links, 3 = hinten rechts
|
|
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENDRUCKWERT_WERT_0XDC99 (RXBUF_SINT(5)/1000.0f)
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENDRUCKWERT_WERT_0XDC99_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENDRUCKWERT_WERT_0XDC99_TYPE float
|
|
// Last valid tire pressure value returned by the selected wheel / Letzer gültiger Reifendruckwert der vom
|
|
// ausgewählten Rad zurückgeliefert wird
|
|
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENTEMPERATURWERT_WERT_0XDC99 (RXBUF_SCHAR(7))
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENTEMPERATURWERT_WERT_0XDC99_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENTEMPERATURWERT_WERT_0XDC99_TYPE char
|
|
// Last valid tire temperature of the selected wheel / Letzte gültige Reifentemperatur des ausgewählten Rads
|
|
|
|
#define I3_RES_DSC_STAT_SOLLDRUCK_WERT_0XDC99 (RXBUF_SINT(8)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SOLLDRUCK_WERT_0XDC99_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_SOLLDRUCK_WERT_0XDC99_TYPE float
|
|
// Predefined target pressure of the selected wheel / Vorgegebener Solldruck des ausgewählten Rads
|
|
|
|
#define I3_RES_DSC_STAT_GUTEMPFAENGE_0XDC99 (RXBUF_UINT(10))
|
|
#define I3_RES_DSC_STAT_GUTEMPFAENGE_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_GUTEMPFAENGE_0XDC99_TYPE unsigned short
|
|
// Number of correctly received telegrams from the selected bike / Anzahl korrekt empfangener Telegramme vom
|
|
// ausgewählten Rad
|
|
|
|
#define I3_RES_DSC_STAT_AUSBEUTE_0XDC99 (RXBUF_UCHAR(12))
|
|
#define I3_RES_DSC_STAT_AUSBEUTE_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_AUSBEUTE_0XDC99_TYPE unsigned char
|
|
// Telegram yield from the selected bike in percent / Telegrammausbeute vom ausgewählten Rad in Prozent
|
|
|
|
#define I3_RES_DSC_STAT_RSSI_PEGEL_0XDC99 (RXBUF_UINT(13))
|
|
#define I3_RES_DSC_STAT_RSSI_PEGEL_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RSSI_PEGEL_0XDC99_TYPE unsigned short
|
|
// RSSI - level of the ID [unit: AD converter units] / RSSI - Pegel der ID [Einheit: AD Wandler-Einheiten]
|
|
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_0XDC99 (RXBUF_UINT(15))
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_0XDC99_TYPE unsigned short
|
|
// Remaining battery life on the wheel sensor in months / Verbleibende Restlebensdauer der Batterie am Radsensor
|
|
// in Monaten
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_0XDC99 (RXBUF_UCHAR(17))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_0XDC99_TYPE unsigned char
|
|
// Status message from the wheel electronics of the selected wheel. / Status Meldung der Radelektronik des
|
|
// angewählten Rads.
|
|
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_AKTIV_0XDC99 (RXBUF_UCHAR(18))
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_AKTIV_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_AKTIV_0XDC99_TYPE unsigned char
|
|
// Breakdown warning from the selected bike, 0 = inactive, 1 = active, FF = signal unknown / Pannen Warnung vom
|
|
// angewählten Rad, 0= Inaktiv, 1 = aktiv, FF = Signal unbekannt
|
|
|
|
#define I3_RES_DSC_STAT_POS_CHANGED_0XDC99 (RXBUF_UCHAR(19))
|
|
#define I3_RES_DSC_STAT_POS_CHANGED_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_POS_CHANGED_0XDC99_TYPE unsigned char
|
|
// Wheel electronics ID of the selected wheel has changed, 0 = not changed, 1 = changed, FF = signal unknown /
|
|
// Radelektronik ID vom angewählten Rad hat sich geändert, 0 = nicht geändert, 1 = geändert, FF= Signal unbekannt
|
|
|
|
#define I3_RES_DSC_STAT_RE_OVERHEAT_AKTIV_0XDC99 (RXBUF_UCHAR(20))
|
|
#define I3_RES_DSC_STAT_RE_OVERHEAT_AKTIV_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RE_OVERHEAT_AKTIV_0XDC99_TYPE unsigned char
|
|
// Overheating message from the wheel electronics of the selected wheel, 0 = inactive, 1 = active, FF = signal
|
|
// unknown / Überhitzungsmeldung der Radelektronik vom angewählten Rad, 0 = Inaktiv, 1 = aktiv, FF = Signal
|
|
// unbekannt
|
|
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_0XDC99 (RXBUF_UCHAR(21))
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_0XDC99_TYPE unsigned char
|
|
// Direction of rotation of the wheel 0 = standstill 1 = right 2 = left 3 = unknown 255 = not defined /
|
|
// Drehrichtung des Rades 0=Stillstand 1=rechts 2=links 3=unbekannt 255=nicht definiert
|
|
|
|
#define I3_RES_DSC_STAT_FOLGEAUSFALL_0XDC99 (RXBUF_UCHAR(22))
|
|
#define I3_RES_DSC_STAT_FOLGEAUSFALL_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_FOLGEAUSFALL_0XDC99_TYPE unsigned char
|
|
// Number of time intervals (typically 60s) since the last telegram was received / Anzahl Zeitintervalle (typ.
|
|
// 60s) seit letztem Telegrammempfang
|
|
|
|
#define I3_RES_DSC_STAT_RE_HERSTELLER_0XDC99 (RXBUF_UCHAR(23))
|
|
#define I3_RES_DSC_STAT_RE_HERSTELLER_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RE_HERSTELLER_0XDC99_TYPE unsigned char
|
|
// RE manufacturer / RE-Hersteller
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_SENDEMODE_0XDC99 (RXBUF_UCHAR(24))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_SENDEMODE_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_SENDEMODE_0XDC99_TYPE unsigned char
|
|
// Transmission mode of the wheel electronics / Sendemode der Radelektronik
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_FEHLER_WERT_0XDC99 (RXBUF_UINT(25))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_FEHLER_WERT_0XDC99_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_FEHLER_WERT_0XDC99_TYPE unsigned short
|
|
// Error code wheel electronics / Fehlercode Radelektronik
|
|
|
|
#define I3_RES_DSC_STAT_ROLLSWITCH_0XDC99 (RXBUF_UCHAR(27))
|
|
#define I3_RES_DSC_STAT_ROLLSWITCH_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ROLLSWITCH_0XDC99_TYPE unsigned char
|
|
// Status Rollswitch / Status Rollswitch
|
|
|
|
#define I3_RES_DSC_STAT_TELEGRAMMTYP_0XDC99 (RXBUF_UCHAR(28))
|
|
#define I3_RES_DSC_STAT_TELEGRAMMTYP_0XDC99_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_TELEGRAMMTYP_0XDC99_TYPE unsigned char
|
|
// Telegram type / Telegrammtyp
|
|
|
|
#define I3_PID_DSC_RDC_MESSDATENBLOCK_3 0xDC9A
|
|
// RDC_MESSDATENBLOCK_3 / RDC_MESSDATENBLOCK_3
|
|
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_0XDC9A (RXBUF_UINT32(0))
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_0XDC9A_TYPE unsigned long
|
|
// Wheel electronics identifier / Radelektronik Identifier
|
|
|
|
#define I3_RES_DSC_STAT_RAD_POSITION_NR_0XDC9A (RXBUF_UCHAR(4))
|
|
#define I3_RES_DSC_STAT_RAD_POSITION_NR_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RAD_POSITION_NR_0XDC9A_TYPE unsigned char
|
|
// The read out wheel position of the identifier (measuring block) was assigned to the respective position by the
|
|
// SG. Position of the wheel electronics: 0 = front left, 1 = front right, 2 = rear left, 3 = rear right /
|
|
// Ausgelesene Radposition des Identifiers (Messblock) wurde vom SG der jeweiligen Position zugewiesen. Position
|
|
// der Radelektronik: 0 = vorne links, 1 = vorne rechts, 2 = hinten links, 3 = hinten rechts
|
|
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENDRUCKWERT_WERT_0XDC9A (RXBUF_SINT(5)/1000.0f)
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENDRUCKWERT_WERT_0XDC9A_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENDRUCKWERT_WERT_0XDC9A_TYPE float
|
|
// Last valid tire pressure value returned by the selected wheel / Letzer gültiger Reifendruckwert der vom
|
|
// ausgewählten Rad zurückgeliefert wird
|
|
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENTEMPERATURWERT_WERT_0XDC9A (RXBUF_SCHAR(7))
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENTEMPERATURWERT_WERT_0XDC9A_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENTEMPERATURWERT_WERT_0XDC9A_TYPE char
|
|
// Last valid tire temperature of the selected wheel / Letzte gültige Reifentemperatur des ausgewählten Rads
|
|
|
|
#define I3_RES_DSC_STAT_SOLLDRUCK_WERT_0XDC9A (RXBUF_SINT(8)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SOLLDRUCK_WERT_0XDC9A_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_SOLLDRUCK_WERT_0XDC9A_TYPE float
|
|
// Predefined target pressure of the selected wheel / Vorgegebener Solldruck des ausgewählten Rads
|
|
|
|
#define I3_RES_DSC_STAT_GUTEMPFAENGE_0XDC9A (RXBUF_UINT(10))
|
|
#define I3_RES_DSC_STAT_GUTEMPFAENGE_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_GUTEMPFAENGE_0XDC9A_TYPE unsigned short
|
|
// Number of correctly received telegrams from the selected bike / Anzahl korrekt empfangener Telegramme vom
|
|
// ausgewählten Rad
|
|
|
|
#define I3_RES_DSC_STAT_AUSBEUTE_0XDC9A (RXBUF_UCHAR(12))
|
|
#define I3_RES_DSC_STAT_AUSBEUTE_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_AUSBEUTE_0XDC9A_TYPE unsigned char
|
|
// Telegram yield from the selected bike in percent / Telegrammausbeute vom ausgewählten Rad in Prozent
|
|
|
|
#define I3_RES_DSC_STAT_RSSI_PEGEL_0XDC9A (RXBUF_UINT(13))
|
|
#define I3_RES_DSC_STAT_RSSI_PEGEL_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RSSI_PEGEL_0XDC9A_TYPE unsigned short
|
|
// RSSI - level of the ID [unit: AD converter units] / RSSI - Pegel der ID [Einheit: AD Wandler-Einheiten]
|
|
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_0XDC9A (RXBUF_UINT(15))
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_0XDC9A_TYPE unsigned short
|
|
// Remaining battery life on the wheel sensor in months / Verbleibende Restlebensdauer der Batterie am Radsensor
|
|
// in Monaten
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_0XDC9A (RXBUF_UCHAR(17))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_0XDC9A_TYPE unsigned char
|
|
// Status message from the wheel electronics of the selected wheel. / Status Meldung der Radelektronik des
|
|
// angewählten Rads.
|
|
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_AKTIV_0XDC9A (RXBUF_UCHAR(18))
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_AKTIV_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_AKTIV_0XDC9A_TYPE unsigned char
|
|
// Breakdown warning from the selected bike, 0 = inactive, 1 = active, FF = signal unknown / Pannen Warnung vom
|
|
// angewählten Rad, 0= Inaktiv, 1 = aktiv, FF = Signal unbekannt
|
|
|
|
#define I3_RES_DSC_STAT_POS_CHANGED_0XDC9A (RXBUF_UCHAR(19))
|
|
#define I3_RES_DSC_STAT_POS_CHANGED_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_POS_CHANGED_0XDC9A_TYPE unsigned char
|
|
// Wheel electronics ID of the selected wheel has changed, 0 = not changed, 1 = changed, FF = signal unknown /
|
|
// Radelektronik ID vom angewählten Rad hat sich geändert, 0 = nicht geändert, 1 = geändert, FF= Signal unbekannt
|
|
|
|
#define I3_RES_DSC_STAT_RE_OVERHEAT_AKTIV_0XDC9A (RXBUF_UCHAR(20))
|
|
#define I3_RES_DSC_STAT_RE_OVERHEAT_AKTIV_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RE_OVERHEAT_AKTIV_0XDC9A_TYPE unsigned char
|
|
// Overheating message from the wheel electronics of the selected wheel, 0 = inactive, 1 = active, FF = signal
|
|
// unknown / Überhitzungsmeldung der Radelektronik vom angewählten Rad, 0 = Inaktiv, 1 = aktiv, FF = Signal
|
|
// unbekannt
|
|
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_0XDC9A (RXBUF_UCHAR(21))
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_0XDC9A_TYPE unsigned char
|
|
// Direction of rotation of the wheel 0 = standstill 1 = right 2 = left 3 = unknown 255 = not defined /
|
|
// Drehrichtung des Rades 0=Stillstand 1=rechts 2=links 3=unbekannt 255=nicht definiert
|
|
|
|
#define I3_RES_DSC_STAT_FOLGEAUSFALL_0XDC9A (RXBUF_UCHAR(22))
|
|
#define I3_RES_DSC_STAT_FOLGEAUSFALL_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_FOLGEAUSFALL_0XDC9A_TYPE unsigned char
|
|
// Number of time intervals (typically 60s) since the last telegram was received / Anzahl Zeitintervalle (typ.
|
|
// 60s) seit letztem Telegrammempfang
|
|
|
|
#define I3_RES_DSC_STAT_RE_HERSTELLER_0XDC9A (RXBUF_UCHAR(23))
|
|
#define I3_RES_DSC_STAT_RE_HERSTELLER_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RE_HERSTELLER_0XDC9A_TYPE unsigned char
|
|
// RE manufacturer / RE-Hersteller
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_SENDEMODE_0XDC9A (RXBUF_UCHAR(24))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_SENDEMODE_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_SENDEMODE_0XDC9A_TYPE unsigned char
|
|
// Transmission mode of the wheel electronics / Sendemode der Radelektronik
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_FEHLER_WERT_0XDC9A (RXBUF_UINT(25))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_FEHLER_WERT_0XDC9A_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_FEHLER_WERT_0XDC9A_TYPE unsigned short
|
|
// Error code wheel electronics / Fehlercode Radelektronik
|
|
|
|
#define I3_RES_DSC_STAT_ROLLSWITCH_0XDC9A (RXBUF_UCHAR(27))
|
|
#define I3_RES_DSC_STAT_ROLLSWITCH_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ROLLSWITCH_0XDC9A_TYPE unsigned char
|
|
// Status Rollswitch / Status Rollswitch
|
|
|
|
#define I3_RES_DSC_STAT_TELEGRAMMTYP_0XDC9A (RXBUF_UCHAR(28))
|
|
#define I3_RES_DSC_STAT_TELEGRAMMTYP_0XDC9A_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_TELEGRAMMTYP_0XDC9A_TYPE unsigned char
|
|
// Telegram type / Telegrammtyp
|
|
|
|
#define I3_PID_DSC_RDC_MESSDATENBLOCK_4 0xDC9B
|
|
// RDC_MESSDATENBLOCK_4 / RDC_MESSDATENBLOCK_4
|
|
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_0XDC9B (RXBUF_UINT32(0))
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_0XDC9B_TYPE unsigned long
|
|
// Wheel electronics identifier / Radelektronik Identifier
|
|
|
|
#define I3_RES_DSC_STAT_RAD_POSITION_NR_0XDC9B (RXBUF_UCHAR(4))
|
|
#define I3_RES_DSC_STAT_RAD_POSITION_NR_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RAD_POSITION_NR_0XDC9B_TYPE unsigned char
|
|
// The read out wheel position of the identifier (measuring block) was assigned to the respective position by the
|
|
// SG. Position of the wheel electronics: 0 = front left, 1 = front right, 2 = rear left, 3 = rear right /
|
|
// Ausgelesene Radposition des Identifiers (Messblock) wurde vom SG der jeweiligen Position zugewiesen. Position
|
|
// der Radelektronik: 0 = vorne links, 1 = vorne rechts, 2 = hinten links, 3 = hinten rechts
|
|
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENDRUCKWERT_WERT_0XDC9B (RXBUF_SINT(5)/1000.0f)
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENDRUCKWERT_WERT_0XDC9B_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENDRUCKWERT_WERT_0XDC9B_TYPE float
|
|
// Last valid tire pressure value returned by the selected wheel / Letzer gültiger Reifendruckwert der vom
|
|
// ausgewählten Rad zurückgeliefert wird
|
|
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENTEMPERATURWERT_WERT_0XDC9B (RXBUF_SCHAR(7))
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENTEMPERATURWERT_WERT_0XDC9B_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_LETZTER_REIFENTEMPERATURWERT_WERT_0XDC9B_TYPE char
|
|
// Last valid tire temperature of the selected wheel / Letzte gültige Reifentemperatur des ausgewählten Rads
|
|
|
|
#define I3_RES_DSC_STAT_SOLLDRUCK_WERT_0XDC9B (RXBUF_SINT(8)/1000.0f)
|
|
#define I3_RES_DSC_STAT_SOLLDRUCK_WERT_0XDC9B_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_SOLLDRUCK_WERT_0XDC9B_TYPE float
|
|
// Predefined target pressure of the selected wheel / Vorgegebener Solldruck des ausgewählten Rads
|
|
|
|
#define I3_RES_DSC_STAT_GUTEMPFAENGE_0XDC9B (RXBUF_UINT(10))
|
|
#define I3_RES_DSC_STAT_GUTEMPFAENGE_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_GUTEMPFAENGE_0XDC9B_TYPE unsigned short
|
|
// Number of correctly received telegrams from the selected bike / Anzahl korrekt empfangener Telegramme vom
|
|
// ausgewählten Rad
|
|
|
|
#define I3_RES_DSC_STAT_AUSBEUTE_0XDC9B (RXBUF_UCHAR(12))
|
|
#define I3_RES_DSC_STAT_AUSBEUTE_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_AUSBEUTE_0XDC9B_TYPE unsigned char
|
|
// Telegram yield from the selected bike in percent / Telegrammausbeute vom ausgewählten Rad in Prozent
|
|
|
|
#define I3_RES_DSC_STAT_RSSI_PEGEL_0XDC9B (RXBUF_UINT(13))
|
|
#define I3_RES_DSC_STAT_RSSI_PEGEL_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RSSI_PEGEL_0XDC9B_TYPE unsigned short
|
|
// RSSI - level of the ID [unit: AD converter units] / RSSI - Pegel der ID [Einheit: AD Wandler-Einheiten]
|
|
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_0XDC9B (RXBUF_UINT(15))
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_0XDC9B_TYPE unsigned short
|
|
// Remaining battery life on the wheel sensor in months / Verbleibende Restlebensdauer der Batterie am Radsensor
|
|
// in Monaten
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_0XDC9B (RXBUF_UCHAR(17))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_0XDC9B_TYPE unsigned char
|
|
// Status message from the wheel electronics of the selected wheel. / Status Meldung der Radelektronik des
|
|
// angewählten Rads.
|
|
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_AKTIV_0XDC9B (RXBUF_UCHAR(18))
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_AKTIV_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_HARTE_WARNUNG_AKTIV_0XDC9B_TYPE unsigned char
|
|
// Breakdown warning from the selected bike, 0 = inactive, 1 = active, FF = signal unknown / Pannen Warnung vom
|
|
// angewählten Rad, 0= Inaktiv, 1 = aktiv, FF = Signal unbekannt
|
|
|
|
#define I3_RES_DSC_STAT_POS_CHANGED_0XDC9B (RXBUF_UCHAR(19))
|
|
#define I3_RES_DSC_STAT_POS_CHANGED_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_POS_CHANGED_0XDC9B_TYPE unsigned char
|
|
// Wheel electronics ID of the selected wheel has changed, 0 = not changed, 1 = changed, FF = signal unknown /
|
|
// Radelektronik ID vom angewählten Rad hat sich geändert, 0 = nicht geändert, 1 = geändert, FF= Signal unbekannt
|
|
|
|
#define I3_RES_DSC_STAT_RE_OVERHEAT_AKTIV_0XDC9B (RXBUF_UCHAR(20))
|
|
#define I3_RES_DSC_STAT_RE_OVERHEAT_AKTIV_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RE_OVERHEAT_AKTIV_0XDC9B_TYPE unsigned char
|
|
// Overheating message from the wheel electronics of the selected wheel, 0 = inactive, 1 = active, FF = signal
|
|
// unknown / Überhitzungsmeldung der Radelektronik vom angewählten Rad, 0 = Inaktiv, 1 = aktiv, FF = Signal
|
|
// unbekannt
|
|
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_0XDC9B (RXBUF_UCHAR(21))
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_DREHRICHTUNG_0XDC9B_TYPE unsigned char
|
|
// Direction of rotation of the wheel 0 = standstill 1 = right 2 = left 3 = unknown 255 = not defined /
|
|
// Drehrichtung des Rades 0=Stillstand 1=rechts 2=links 3=unbekannt 255=nicht definiert
|
|
|
|
#define I3_RES_DSC_STAT_FOLGEAUSFALL_0XDC9B (RXBUF_UCHAR(22))
|
|
#define I3_RES_DSC_STAT_FOLGEAUSFALL_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_FOLGEAUSFALL_0XDC9B_TYPE unsigned char
|
|
// Number of time intervals (typically 60s) since the last telegram was received / Anzahl Zeitintervalle (typ.
|
|
// 60s) seit letztem Telegrammempfang
|
|
|
|
#define I3_RES_DSC_STAT_RE_HERSTELLER_0XDC9B (RXBUF_UCHAR(23))
|
|
#define I3_RES_DSC_STAT_RE_HERSTELLER_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RE_HERSTELLER_0XDC9B_TYPE unsigned char
|
|
// RE manufacturer / RE-Hersteller
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_SENDEMODE_0XDC9B (RXBUF_UCHAR(24))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_SENDEMODE_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_SENDEMODE_0XDC9B_TYPE unsigned char
|
|
// Transmission mode of the wheel electronics / Sendemode der Radelektronik
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_FEHLER_WERT_0XDC9B (RXBUF_UINT(25))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_FEHLER_WERT_0XDC9B_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_FEHLER_WERT_0XDC9B_TYPE unsigned short
|
|
// Error code wheel electronics / Fehlercode Radelektronik
|
|
|
|
#define I3_RES_DSC_STAT_ROLLSWITCH_0XDC9B (RXBUF_UCHAR(27))
|
|
#define I3_RES_DSC_STAT_ROLLSWITCH_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ROLLSWITCH_0XDC9B_TYPE unsigned char
|
|
// Status Rollswitch / Status Rollswitch
|
|
|
|
#define I3_RES_DSC_STAT_TELEGRAMMTYP_0XDC9B (RXBUF_UCHAR(28))
|
|
#define I3_RES_DSC_STAT_TELEGRAMMTYP_0XDC9B_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_TELEGRAMMTYP_0XDC9B_TYPE unsigned char
|
|
// Telegram type / Telegrammtyp
|
|
|
|
#define I3_PID_DSC_RDC_HS_WARNEREIGNIS_1 0xDC9C
|
|
// RDC_HS_WARNEREIGNIS_1 / RDC_HS_WARNEREIGNIS_1
|
|
|
|
// Can't yet generate code for STAT_DATUM_TEXT of type string[9], at offset 0. But we account for the 9 bytes
|
|
// Date of the warning event. 99.99.99 => invalid / Datum zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_UHRZEIT_TEXT of type string[9], at offset 9. But we account for the 9 bytes
|
|
// Time of the warning event. 99.99.99 => invalid / Uhrzeit zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT (RXBUF_SINT32(18))
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT (RXBUF_UINT32(22))
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT (RXBUF_SCHAR(26))
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_UNIT '°'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_TYPE char
|
|
// Outside temperature when filling / Aussentemperatur beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT (RXBUF_SINT(27)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_TYPE float
|
|
// External pressure when filling / Aussendruck beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT (RXBUF_SCHAR(29))
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_UNIT '°'
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_TYPE char
|
|
// Outside temperature at warning event / Aussentemperatur bei Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT (RXBUF_SINT(30)/1000.0f)
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_TYPE float
|
|
// External pressure in the event of a warning / Aussendruck beim Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT (RXBUF_UCHAR(32))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_TYPE unsigned char
|
|
// Wheel electronics status of the wheel causing the breakdown / Radelektronik-Status des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD (RXBUF_UCHAR(33))
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_TYPE unsigned char
|
|
// Wheel position of the wheel causing the breakdown / Radposition des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0 (RXBUF_UCHAR(34))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_TYPE unsigned char
|
|
// Wheel position RE0 / Radposition RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT (RXBUF_SINT(35)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_TYPE float
|
|
// Filling pressure value RE0 / Befuelldruckwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT (RXBUF_SCHAR(37))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_TYPE char
|
|
// Filling temperature value RE0 / Befuelltemperaturwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT (RXBUF_SINT(38)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_TYPE float
|
|
// Tire pressure RE0 / Reifenddruck RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT (RXBUF_SCHAR(40))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_TYPE char
|
|
// Tire temperature RE0 / Reifentemperatur RE0
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1 (RXBUF_UCHAR(41))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_TYPE unsigned char
|
|
// Wheel position RE1 / Radposition RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT (RXBUF_SINT(42)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_TYPE float
|
|
// Filling pressure value RE1 / Befuelldruckwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT (RXBUF_SCHAR(44))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_TYPE char
|
|
// Filling temperature value RE1 / Befuelltemperaturwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT (RXBUF_SINT(45)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_TYPE float
|
|
// Tire pressure RE1 / Reifenddruck RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT (RXBUF_SCHAR(47))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_TYPE char
|
|
// Tire temperature RE1 / Reifentemperatur RE1
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2 (RXBUF_UCHAR(48))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_TYPE unsigned char
|
|
// Wheel position RE2 / Radposition RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT (RXBUF_SINT(49)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_TYPE float
|
|
// Filling pressure value RE2 / Befuelldruckwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT (RXBUF_SCHAR(51))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_TYPE char
|
|
// Filling temperature value RE2 / Befuelltemperaturwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT (RXBUF_SINT(52)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_TYPE float
|
|
// Tire pressure RE2 / Reifenddruck RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT (RXBUF_SCHAR(54))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_TYPE char
|
|
// Tire temperature RE2 / Reifentemperatur RE2
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3 (RXBUF_UCHAR(55))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_TYPE unsigned char
|
|
// Wheel position RE3 / Radposition RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT (RXBUF_SINT(56)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_TYPE float
|
|
// Filling pressure value RE3 / Befuelldruckwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT (RXBUF_SCHAR(58))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_TYPE char
|
|
// Filling temperature value RE3 / Befuelltemperaturwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT (RXBUF_SINT(59)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_TYPE float
|
|
// Tire pressure RE3 / Reifenddruck RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT (RXBUF_SCHAR(61))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_TYPE char
|
|
// Tire temperature RE3 / Reifentemperatur RE3
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARNEREIGNIS_WERT (RXBUF_UCHAR(62))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARNEREIGNIS_WERT_TYPE unsigned char
|
|
// Warning events counter / Zaehler Warnereignisse
|
|
|
|
#define I3_PID_DSC_RDC_HS_WARNEREIGNIS_2 0xDC9D
|
|
// RDC_HS_WARNEREIGNIS_2 / RDC_HS_WARNEREIGNIS_2
|
|
|
|
// Can't yet generate code for STAT_DATUM_TEXT_0XDC9D of type string[9], at offset 0. But we account for the 9 bytes
|
|
// Date of the warning event. 99.99.99 => invalid / Datum zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_UHRZEIT_TEXT_0XDC9D of type string[9], at offset 9. But we account for the 9 bytes
|
|
// Time of the warning event. 99.99.99 => invalid / Uhrzeit zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDC9D (RXBUF_SINT32(18))
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDC9D_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDC9D_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDC9D (RXBUF_UINT32(22))
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDC9D_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDC9D_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDC9D (RXBUF_SCHAR(26))
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDC9D_UNIT '°'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDC9D_TYPE char
|
|
// Outside temperature when filling / Aussentemperatur beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDC9D (RXBUF_SINT(27)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDC9D_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDC9D_TYPE float
|
|
// External pressure when filling / Aussendruck beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDC9D (RXBUF_SCHAR(29))
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDC9D_UNIT '°'
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDC9D_TYPE char
|
|
// Outside temperature at warning event / Aussentemperatur bei Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDC9D (RXBUF_SINT(30)/1000.0f)
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDC9D_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDC9D_TYPE float
|
|
// External pressure in the event of a warning / Aussendruck beim Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDC9D (RXBUF_UCHAR(32))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDC9D_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDC9D_TYPE unsigned char
|
|
// Wheel electronics status of the wheel causing the breakdown / Radelektronik-Status des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDC9D (RXBUF_UCHAR(33))
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDC9D_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDC9D_TYPE unsigned char
|
|
// Wheel position of the wheel causing the breakdown / Radposition des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDC9D (RXBUF_UCHAR(34))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDC9D_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDC9D_TYPE unsigned char
|
|
// Wheel position RE0 / Radposition RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDC9D (RXBUF_SINT(35)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDC9D_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDC9D_TYPE float
|
|
// Filling pressure value RE0 / Befuelldruckwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDC9D (RXBUF_SCHAR(37))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDC9D_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDC9D_TYPE char
|
|
// Filling temperature value RE0 / Befuelltemperaturwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDC9D (RXBUF_SINT(38)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDC9D_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDC9D_TYPE float
|
|
// Tire pressure RE0 / Reifenddruck RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDC9D (RXBUF_SCHAR(40))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDC9D_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDC9D_TYPE char
|
|
// Tire temperature RE0 / Reifentemperatur RE0
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDC9D (RXBUF_UCHAR(41))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDC9D_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDC9D_TYPE unsigned char
|
|
// Wheel position RE1 / Radposition RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDC9D (RXBUF_SINT(42)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDC9D_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDC9D_TYPE float
|
|
// Filling pressure value RE1 / Befuelldruckwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDC9D (RXBUF_SCHAR(44))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDC9D_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDC9D_TYPE char
|
|
// Filling temperature value RE1 / Befuelltemperaturwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDC9D (RXBUF_SINT(45)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDC9D_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDC9D_TYPE float
|
|
// Tire pressure RE1 / Reifenddruck RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDC9D (RXBUF_SCHAR(47))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDC9D_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDC9D_TYPE char
|
|
// Tire temperature RE1 / Reifentemperatur RE1
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDC9D (RXBUF_UCHAR(48))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDC9D_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDC9D_TYPE unsigned char
|
|
// Wheel position RE2 / Radposition RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDC9D (RXBUF_SINT(49)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDC9D_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDC9D_TYPE float
|
|
// Filling pressure value RE2 / Befuelldruckwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDC9D (RXBUF_SCHAR(51))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDC9D_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDC9D_TYPE char
|
|
// Filling temperature value RE2 / Befuelltemperaturwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDC9D (RXBUF_SINT(52)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDC9D_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDC9D_TYPE float
|
|
// Tire pressure RE2 / Reifenddruck RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDC9D (RXBUF_SCHAR(54))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDC9D_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDC9D_TYPE char
|
|
// Tire temperature RE2 / Reifentemperatur RE2
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDC9D (RXBUF_UCHAR(55))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDC9D_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDC9D_TYPE unsigned char
|
|
// Wheel position RE3 / Radposition RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDC9D (RXBUF_SINT(56)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDC9D_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDC9D_TYPE float
|
|
// Filling pressure value RE3 / Befuelldruckwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDC9D (RXBUF_SCHAR(58))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDC9D_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDC9D_TYPE char
|
|
// Filling temperature value RE3 / Befuelltemperaturwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDC9D (RXBUF_SINT(59)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDC9D_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDC9D_TYPE float
|
|
// Tire pressure RE3 / Reifenddruck RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDC9D (RXBUF_SCHAR(61))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDC9D_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDC9D_TYPE char
|
|
// Tire temperature RE3 / Reifentemperatur RE3
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARNEREIGNIS_WERT_0XDC9D (RXBUF_UCHAR(62))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARNEREIGNIS_WERT_0XDC9D_TYPE unsigned char
|
|
// Warning events counter / Zaehler Warnereignisse
|
|
|
|
#define I3_PID_DSC_RDC_HS_WARNEREIGNIS_3 0xDC9E
|
|
// RDC_HS_WARNEREIGNIS_3 / RDC_HS_WARNEREIGNIS_3
|
|
|
|
// Can't yet generate code for STAT_DATUM_TEXT_0XDC9E of type string[9], at offset 0. But we account for the 9 bytes
|
|
// Date of the warning event. 99.99.99 => invalid / Datum zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_UHRZEIT_TEXT_0XDC9E of type string[9], at offset 9. But we account for the 9 bytes
|
|
// Time of the warning event. 99.99.99 => invalid / Uhrzeit zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDC9E (RXBUF_SINT32(18))
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDC9E_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDC9E_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDC9E (RXBUF_UINT32(22))
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDC9E_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDC9E_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDC9E (RXBUF_SCHAR(26))
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDC9E_UNIT '°'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDC9E_TYPE char
|
|
// Outside temperature when filling / Aussentemperatur beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDC9E (RXBUF_SINT(27)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDC9E_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDC9E_TYPE float
|
|
// External pressure when filling / Aussendruck beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDC9E (RXBUF_SCHAR(29))
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDC9E_UNIT '°'
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDC9E_TYPE char
|
|
// Outside temperature at warning event / Aussentemperatur bei Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDC9E (RXBUF_SINT(30)/1000.0f)
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDC9E_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDC9E_TYPE float
|
|
// External pressure in the event of a warning / Aussendruck beim Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDC9E (RXBUF_UCHAR(32))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDC9E_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDC9E_TYPE unsigned char
|
|
// Wheel electronics status of the wheel causing the breakdown / Radelektronik-Status des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDC9E (RXBUF_UCHAR(33))
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDC9E_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDC9E_TYPE unsigned char
|
|
// Wheel position of the wheel causing the breakdown / Radposition des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDC9E (RXBUF_UCHAR(34))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDC9E_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDC9E_TYPE unsigned char
|
|
// Wheel position RE0 / Radposition RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDC9E (RXBUF_SINT(35)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDC9E_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDC9E_TYPE float
|
|
// Filling pressure value RE0 / Befuelldruckwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDC9E (RXBUF_SCHAR(37))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDC9E_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDC9E_TYPE char
|
|
// Filling temperature value RE0 / Befuelltemperaturwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDC9E (RXBUF_SINT(38)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDC9E_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDC9E_TYPE float
|
|
// Tire pressure RE0 / Reifenddruck RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDC9E (RXBUF_SCHAR(40))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDC9E_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDC9E_TYPE char
|
|
// Tire temperature RE0 / Reifentemperatur RE0
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDC9E (RXBUF_UCHAR(41))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDC9E_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDC9E_TYPE unsigned char
|
|
// Wheel position RE1 / Radposition RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDC9E (RXBUF_SINT(42)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDC9E_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDC9E_TYPE float
|
|
// Filling pressure value RE1 / Befuelldruckwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDC9E (RXBUF_SCHAR(44))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDC9E_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDC9E_TYPE char
|
|
// Filling temperature value RE1 / Befuelltemperaturwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDC9E (RXBUF_SINT(45)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDC9E_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDC9E_TYPE float
|
|
// Tire pressure RE1 / Reifenddruck RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDC9E (RXBUF_SCHAR(47))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDC9E_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDC9E_TYPE char
|
|
// Tire temperature RE1 / Reifentemperatur RE1
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDC9E (RXBUF_UCHAR(48))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDC9E_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDC9E_TYPE unsigned char
|
|
// Wheel position RE2 / Radposition RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDC9E (RXBUF_SINT(49)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDC9E_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDC9E_TYPE float
|
|
// Filling pressure value RE2 / Befuelldruckwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDC9E (RXBUF_SCHAR(51))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDC9E_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDC9E_TYPE char
|
|
// Filling temperature value RE2 / Befuelltemperaturwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDC9E (RXBUF_SINT(52)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDC9E_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDC9E_TYPE float
|
|
// Tire pressure RE2 / Reifenddruck RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDC9E (RXBUF_SCHAR(54))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDC9E_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDC9E_TYPE char
|
|
// Tire temperature RE2 / Reifentemperatur RE2
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDC9E (RXBUF_UCHAR(55))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDC9E_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDC9E_TYPE unsigned char
|
|
// Wheel position RE3 / Radposition RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDC9E (RXBUF_SINT(56)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDC9E_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDC9E_TYPE float
|
|
// Filling pressure value RE3 / Befuelldruckwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDC9E (RXBUF_SCHAR(58))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDC9E_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDC9E_TYPE char
|
|
// Filling temperature value RE3 / Befuelltemperaturwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDC9E (RXBUF_SINT(59)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDC9E_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDC9E_TYPE float
|
|
// Tire pressure RE3 / Reifenddruck RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDC9E (RXBUF_SCHAR(61))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDC9E_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDC9E_TYPE char
|
|
// Tire temperature RE3 / Reifentemperatur RE3
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARNEREIGNIS_WERT_0XDC9E (RXBUF_UCHAR(62))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARNEREIGNIS_WERT_0XDC9E_TYPE unsigned char
|
|
// Warning events counter / Zaehler Warnereignisse
|
|
|
|
#define I3_PID_DSC_RDC_HS_WARNEREIGNIS_RUECKNAHME 0xDC9F
|
|
// RDC_HS_WARNEREIGNIS_RUECKNAHME / RDC_HS_WARNEREIGNIS_RUECKNAHME
|
|
|
|
// Can't yet generate code for STAT_DATUM_TEXT_0XDC9F of type string[9], at offset 0. But we account for the 9 bytes
|
|
// Date of the warning event. 99.99.99 => invalid / Datum zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_UHRZEIT_TEXT_0XDC9F of type string[9], at offset 9. But we account for the 9 bytes
|
|
// Time of the warning event. 99.99.99 => invalid / Uhrzeit zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDC9F (RXBUF_SINT32(18))
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDC9F_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDC9F_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDC9F (RXBUF_UINT32(22))
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDC9F_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDC9F_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDC9F (RXBUF_SCHAR(26))
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDC9F_UNIT '°'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDC9F_TYPE char
|
|
// Outside temperature when filling / Aussentemperatur beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDC9F (RXBUF_SINT(27)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDC9F_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDC9F_TYPE float
|
|
// External pressure when filling / Aussendruck beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDC9F (RXBUF_SCHAR(29))
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDC9F_UNIT '°'
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDC9F_TYPE char
|
|
// Outside temperature at warning event / Aussentemperatur bei Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDC9F (RXBUF_SINT(30)/1000.0f)
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDC9F_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDC9F_TYPE float
|
|
// External pressure in the event of a warning / Aussendruck beim Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDC9F (RXBUF_UCHAR(32))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDC9F_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDC9F_TYPE unsigned char
|
|
// Wheel electronics status of the wheel causing the breakdown / Radelektronik-Status des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDC9F (RXBUF_UCHAR(33))
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDC9F_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDC9F_TYPE unsigned char
|
|
// Wheel position of the wheel causing the breakdown / Radposition des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDC9F (RXBUF_UCHAR(34))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDC9F_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDC9F_TYPE unsigned char
|
|
// Wheel position RE0 / Radposition RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDC9F (RXBUF_SINT(35)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDC9F_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDC9F_TYPE float
|
|
// Filling pressure value RE0 / Befuelldruckwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDC9F (RXBUF_SCHAR(37))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDC9F_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDC9F_TYPE char
|
|
// Filling temperature value RE0 / Befuelltemperaturwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDC9F (RXBUF_SINT(38)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDC9F_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDC9F_TYPE float
|
|
// Tire pressure RE0 / Reifenddruck RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDC9F (RXBUF_SCHAR(40))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDC9F_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDC9F_TYPE char
|
|
// Tire temperature RE0 / Reifentemperatur RE0
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDC9F (RXBUF_UCHAR(41))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDC9F_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDC9F_TYPE unsigned char
|
|
// Wheel position RE1 / Radposition RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDC9F (RXBUF_SINT(42)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDC9F_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDC9F_TYPE float
|
|
// Filling pressure value RE1 / Befuelldruckwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDC9F (RXBUF_SCHAR(44))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDC9F_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDC9F_TYPE char
|
|
// Filling temperature value RE1 / Befuelltemperaturwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDC9F (RXBUF_SINT(45)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDC9F_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDC9F_TYPE float
|
|
// Tire pressure RE1 / Reifenddruck RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDC9F (RXBUF_SCHAR(47))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDC9F_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDC9F_TYPE char
|
|
// Tire temperature RE1 / Reifentemperatur RE1
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDC9F (RXBUF_UCHAR(48))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDC9F_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDC9F_TYPE unsigned char
|
|
// Wheel position RE2 / Radposition RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDC9F (RXBUF_SINT(49)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDC9F_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDC9F_TYPE float
|
|
// Filling pressure value RE2 / Befuelldruckwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDC9F (RXBUF_SCHAR(51))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDC9F_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDC9F_TYPE char
|
|
// Filling temperature value RE2 / Befuelltemperaturwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDC9F (RXBUF_SINT(52)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDC9F_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDC9F_TYPE float
|
|
// Tire pressure RE2 / Reifenddruck RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDC9F (RXBUF_SCHAR(54))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDC9F_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDC9F_TYPE char
|
|
// Tire temperature RE2 / Reifentemperatur RE2
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDC9F (RXBUF_UCHAR(55))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDC9F_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDC9F_TYPE unsigned char
|
|
// Wheel position RE3 / Radposition RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDC9F (RXBUF_SINT(56)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDC9F_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDC9F_TYPE float
|
|
// Filling pressure value RE3 / Befuelldruckwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDC9F (RXBUF_SCHAR(58))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDC9F_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDC9F_TYPE char
|
|
// Filling temperature value RE3 / Befuelltemperaturwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDC9F (RXBUF_SINT(59)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDC9F_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDC9F_TYPE float
|
|
// Tire pressure RE3 / Reifenddruck RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDC9F (RXBUF_SCHAR(61))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDC9F_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDC9F_TYPE char
|
|
// Tire temperature RE3 / Reifentemperatur RE3
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARN_RUECKNAHME (RXBUF_UCHAR(62))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARN_RUECKNAHME_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARN_RUECKNAHME_TYPE unsigned char
|
|
// Counter for canceling warnings by refilling air or changing wheels. / Zähler für Warnungsrücknahmen durch
|
|
// Luftnachfüllen oder Radtausch.
|
|
|
|
// Skipping STEUERN_RADELEKTRONIK_VORGEBEN on 0xDCC0 which takes arguments
|
|
|
|
// Skipping STEUERN_DIGITAL_RDC on 0xDCC6 which takes arguments
|
|
|
|
#define I3_PID_DSC_STATUS_RE_LESEN_DRUCKCODIERUNG 0xDCD9
|
|
// Read out pressure coding / Auslesen Druckcodierung
|
|
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE0_WERT (RXBUF_UINT32(0))
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE0_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE0_WERT_TYPE unsigned long
|
|
// Identifier wheel electronics RE0 / Identifier Radelektronik RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDCD9 (RXBUF_SINT(4)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDCD9_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDCD9_TYPE float
|
|
// Tire pressure value wheel electronics RE0 (-9,999 bar => invalid) / Reifendruckwert Radelektronik RE0 (-9.999
|
|
// bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE0_WERT (RXBUF_SINT(6))
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE0_WERT_TYPE short
|
|
// Remaining service life of wheel electronics RE0 in months (-999 months => invalid) / Restlebensdauer
|
|
// Radelektronik RE0 in Monaten (-999 Monate => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE0_WERT (RXBUF_UCHAR(8))
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE0_WERT_TYPE unsigned char
|
|
// Receive counter for wheel electronics RE0 (255 => invalid) / Empfangszaehler Radelektronik RE0 (255 =>
|
|
// ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE1_WERT (RXBUF_UINT32(9))
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE1_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE1_WERT_TYPE unsigned long
|
|
// Identifier wheel electronics RE1 / Identifier Radelektronik RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDCD9 (RXBUF_SINT(13)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDCD9_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDCD9_TYPE float
|
|
// Tire pressure value wheel electronics RE1 (-9,999 bar => invalid) / Reifendruckwert Radelektronik RE1 (-9.999
|
|
// bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE1_WERT (RXBUF_SINT(15))
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE1_WERT_TYPE short
|
|
// Remaining service life of wheel electronics RE1 in months (-999 months => invalid) / Restlebensdauer
|
|
// Radelektronik RE1 in Monaten (-999 Monate => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE1_WERT (RXBUF_UCHAR(17))
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE1_WERT_TYPE unsigned char
|
|
// Receive counter wheel electronics RE1 (255 => invalid) / Empfangszaehler Radelektronik RE1 (255 => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE2_WERT (RXBUF_UINT32(18))
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE2_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE2_WERT_TYPE unsigned long
|
|
// Identifier wheel electronics RE2 / Identifier Radelektronik RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDCD9 (RXBUF_SINT(22)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDCD9_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDCD9_TYPE float
|
|
// Tire pressure value wheel electronics RE2 (-9,999 bar => invalid) / Reifendruckwert Radelektronik RE2 (-9.999
|
|
// bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE2_WERT (RXBUF_SINT(24))
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE2_WERT_TYPE short
|
|
// Remaining service life of RE2 wheel electronics in months (-999 months => invalid) / Restlebensdauer
|
|
// Radelektronik RE2 in Monaten (-999 Monate => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE2_WERT (RXBUF_UCHAR(26))
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE2_WERT_TYPE unsigned char
|
|
// Receive counter wheel electronics RE2 (255 => invalid) / Empfangszaehler Radelektronik RE2 (255 => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE3_WERT (RXBUF_UINT32(27))
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE3_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE3_WERT_TYPE unsigned long
|
|
// Identifier wheel electronics RE3 / Identifier Radelektronik RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDCD9 (RXBUF_SINT(31)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDCD9_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDCD9_TYPE float
|
|
// Tire pressure value wheel electronics RE3 (-9,999 bar => invalid) / Reifendruckwert Radelektronik RE3 (-9.999
|
|
// bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE3_WERT (RXBUF_SINT(33))
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE3_WERT_TYPE short
|
|
// Remaining service life of RE3 wheel electronics in months (-999 months => invalid) / Restlebensdauer
|
|
// Radelektronik RE3 in Monaten (-999 Monate => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE3_WERT (RXBUF_UCHAR(35))
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE3_WERT_TYPE unsigned char
|
|
// Receive counter wheel electronics RE3 (255 => invalid) / Empfangszaehler Radelektronik RE3 (255 => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE4_WERT (RXBUF_UINT32(36))
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE4_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE4_WERT_TYPE unsigned long
|
|
// Identifier wheel electronics RE4 / Identifier Radelektronik RE4
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE4_WERT (RXBUF_SINT(40)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE4_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE4_WERT_TYPE float
|
|
// Tire pressure value wheel electronics RE4 (-9,999 bar => invalid) / Reifendruckwert Radelektronik RE4 (-9.999
|
|
// bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE4_WERT (RXBUF_SINT(42))
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE4_WERT_TYPE short
|
|
// Remaining service life of RE4 wheel electronics in months (-999 months => invalid) / Restlebensdauer
|
|
// Radelektronik RE4 in Monaten (-999 Monate => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE4_WERT (RXBUF_UCHAR(44))
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE4_WERT_TYPE unsigned char
|
|
// Receiving counter wheel electronics RE4 (255 => invalid) / Empfangszaehler Radelektronik RE4 (255 =>
|
|
// ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE5_WERT (RXBUF_UINT32(45))
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE5_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE5_WERT_TYPE unsigned long
|
|
// Identifier wheel electronics RE5 / Identifier Radelektronik RE5
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE5_WERT (RXBUF_SINT(49)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE5_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE5_WERT_TYPE float
|
|
// Tire pressure value wheel electronics RE5 (-9,999 bar => invalid) / Reifendruckwert Radelektronik RE5 (-9.999
|
|
// bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE5_WERT (RXBUF_SINT(51))
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE5_WERT_TYPE short
|
|
// Remaining service life of RE5 wheel electronics in months (-999 months => invalid) / Restlebensdauer
|
|
// Radelektronik RE5 in Monaten (-999 Monate => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE5_WERT (RXBUF_UCHAR(53))
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE5_WERT_TYPE unsigned char
|
|
// Re5 wheel electronics reception counter (255 => invalid) / Empfangszaehler Radelektronik RE5 (255 =>
|
|
// ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE6_WERT (RXBUF_UINT32(54))
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE6_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE6_WERT_TYPE unsigned long
|
|
// Identifier wheel electronics RE6 / Identifier Radelektronik RE6
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE6_WERT (RXBUF_SINT(58)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE6_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE6_WERT_TYPE float
|
|
// Tire pressure value wheel electronics RE6 (-9,999 bar => invalid) / Reifendruckwert Radelektronik RE6 (-9.999
|
|
// bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE6_WERT (RXBUF_SINT(60))
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE6_WERT_TYPE short
|
|
// Remaining service life of RE6 wheel electronics in months (-999 months => invalid) / Restlebensdauer
|
|
// Radelektronik RE6 in Monaten (-999 Monate => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE6_WERT (RXBUF_UCHAR(62))
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE6_WERT_TYPE unsigned char
|
|
// Receiving counter wheel electronics RE6 (255 => invalid) / Empfangszaehler Radelektronik RE6 (255 =>
|
|
// ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE7_WERT (RXBUF_UINT32(63))
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE7_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RE_IDENTIFIER_RE7_WERT_TYPE unsigned long
|
|
// Identifier wheel electronics RE7 / Identifier Radelektronik RE7
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE7_WERT (RXBUF_SINT(67)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE7_WERT_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE7_WERT_TYPE float
|
|
// Tire pressure value wheel electronics RE7 (-9,999 bar => invalid) / Reifendruckwert Radelektronik RE7 (-9.999
|
|
// bar => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE7_WERT (RXBUF_SINT(69))
|
|
#define I3_RES_DSC_STAT_RESTLEBENSDAUER_RE7_WERT_TYPE short
|
|
// Remaining service life of RE7 wheel electronics in months (-999 months => invalid) / Restlebensdauer
|
|
// Radelektronik RE7 in Monaten (-999 Monate => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE7_WERT (RXBUF_UCHAR(71))
|
|
#define I3_RES_DSC_STAT_EMPFANGSZAEHLER_RE7_WERT_TYPE unsigned char
|
|
// Re7 wheel electronics reception counter (255 => invalid) / Empfangszaehler Radelektronik RE7 (255 =>
|
|
// ungueltig)
|
|
|
|
// Skipping STEUERN_SOLLDRUCK_VORGEBEN on 0xDCEE which takes arguments
|
|
|
|
#define I3_PID_DSC_RDC_HS_WARNEREIGNIS_WEICH_1 0xDCF1
|
|
// RDC_WARNEREIGNIS_WEICH_1 / RDC_WARNEREIGNIS_WEICH_1
|
|
|
|
// Can't yet generate code for STAT_DATUM_TEXT_0XDCF1 of type string[9], at offset 0. But we account for the 9 bytes
|
|
// Date of the warning event. 99.99.99 => invalid / Datum zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_UHRZEIT_TEXT_0XDCF1 of type string[9], at offset 9. But we account for the 9 bytes
|
|
// Time of the warning event. 99.99.99 => invalid / Uhrzeit zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDCF1 (RXBUF_SINT32(18))
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDCF1_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDCF1_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDCF1 (RXBUF_UINT32(22))
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDCF1_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDCF1_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDCF1 (RXBUF_SCHAR(26))
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDCF1_UNIT '°'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDCF1_TYPE char
|
|
// Outside temperature when filling / Aussentemperatur beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDCF1 (RXBUF_SINT(27)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDCF1_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDCF1_TYPE float
|
|
// External pressure when filling / Aussendruck beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDCF1 (RXBUF_SCHAR(29))
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDCF1_UNIT '°'
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDCF1_TYPE char
|
|
// Outside temperature at warning event / Aussentemperatur bei Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDCF1 (RXBUF_SINT(30)/1000.0f)
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDCF1_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDCF1_TYPE float
|
|
// External pressure in the event of a warning / Aussendruck beim Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDCF1 (RXBUF_UCHAR(32))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDCF1_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDCF1_TYPE unsigned char
|
|
// Wheel electronics status of the wheel causing the breakdown / Radelektronik-Status des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDCF1 (RXBUF_UCHAR(33))
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDCF1_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDCF1_TYPE unsigned char
|
|
// Wheel position of the wheel causing the breakdown / Radposition des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDCF1 (RXBUF_UCHAR(34))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDCF1_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDCF1_TYPE unsigned char
|
|
// Wheel position RE0 / Radposition RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDCF1 (RXBUF_SINT(35)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDCF1_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDCF1_TYPE float
|
|
// Filling pressure value RE0 / Befuelldruckwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDCF1 (RXBUF_SCHAR(37))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDCF1_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDCF1_TYPE char
|
|
// Filling temperature value RE0 / Befuelltemperaturwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDCF1 (RXBUF_SINT(38)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDCF1_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDCF1_TYPE float
|
|
// Tire pressure RE0 / Reifenddruck RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDCF1 (RXBUF_SCHAR(40))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDCF1_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDCF1_TYPE char
|
|
// Tire temperature RE0 / Reifentemperatur RE0
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDCF1 (RXBUF_UCHAR(41))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDCF1_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDCF1_TYPE unsigned char
|
|
// Wheel position RE1 / Radposition RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDCF1 (RXBUF_SINT(42)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDCF1_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDCF1_TYPE float
|
|
// Filling pressure value RE1 / Befuelldruckwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDCF1 (RXBUF_SCHAR(44))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDCF1_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDCF1_TYPE char
|
|
// Filling temperature value RE1 / Befuelltemperaturwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDCF1 (RXBUF_SINT(45)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDCF1_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDCF1_TYPE float
|
|
// Tire pressure RE1 / Reifenddruck RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDCF1 (RXBUF_SCHAR(47))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDCF1_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDCF1_TYPE char
|
|
// Tire temperature RE1 / Reifentemperatur RE1
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDCF1 (RXBUF_UCHAR(48))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDCF1_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDCF1_TYPE unsigned char
|
|
// Wheel position RE2 / Radposition RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDCF1 (RXBUF_SINT(49)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDCF1_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDCF1_TYPE float
|
|
// Filling pressure value RE2 / Befuelldruckwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDCF1 (RXBUF_SCHAR(51))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDCF1_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDCF1_TYPE char
|
|
// Filling temperature value RE2 / Befuelltemperaturwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDCF1 (RXBUF_SINT(52)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDCF1_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDCF1_TYPE float
|
|
// Tire pressure RE2 / Reifenddruck RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDCF1 (RXBUF_SCHAR(54))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDCF1_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDCF1_TYPE char
|
|
// Tire temperature RE2 / Reifentemperatur RE2
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDCF1 (RXBUF_UCHAR(55))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDCF1_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDCF1_TYPE unsigned char
|
|
// Wheel position RE3 / Radposition RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDCF1 (RXBUF_SINT(56)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDCF1_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDCF1_TYPE float
|
|
// Filling pressure value RE3 / Befuelldruckwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDCF1 (RXBUF_SCHAR(58))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDCF1_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDCF1_TYPE char
|
|
// Filling temperature value RE3 / Befuelltemperaturwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDCF1 (RXBUF_SINT(59)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDCF1_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDCF1_TYPE float
|
|
// Tire pressure RE3 / Reifenddruck RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDCF1 (RXBUF_SCHAR(61))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDCF1_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDCF1_TYPE char
|
|
// Tire temperature RE3 / Reifentemperatur RE3
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARNEREIGNIS_WERT_0XDCF1 (RXBUF_UCHAR(62))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARNEREIGNIS_WERT_0XDCF1_TYPE unsigned char
|
|
// Warning events counter / Zaehler Warnereignisse
|
|
|
|
#define I3_PID_DSC_RDC_HS_WARNEREIGNIS_WEICH_2 0xDCF2
|
|
// RDC_HS_WARNEREIGNIS_WEICH_2 / RDC_HS_WARNEREIGNIS_WEICH_2
|
|
|
|
// Can't yet generate code for STAT_DATUM_TEXT_0XDCF2 of type string[9], at offset 0. But we account for the 9 bytes
|
|
// Date of the warning event. 99.99.99 => invalid / Datum zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_UHRZEIT_TEXT_0XDCF2 of type string[9], at offset 9. But we account for the 9 bytes
|
|
// Time of the warning event. 99.99.99 => invalid / Uhrzeit zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDCF2 (RXBUF_SINT32(18))
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDCF2_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDCF2_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDCF2 (RXBUF_UINT32(22))
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDCF2_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDCF2_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDCF2 (RXBUF_SCHAR(26))
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDCF2_UNIT '°'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDCF2_TYPE char
|
|
// Outside temperature when filling / Aussentemperatur beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDCF2 (RXBUF_SINT(27)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDCF2_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDCF2_TYPE float
|
|
// External pressure when filling / Aussendruck beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDCF2 (RXBUF_SCHAR(29))
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDCF2_UNIT '°'
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDCF2_TYPE char
|
|
// Outside temperature at warning event / Aussentemperatur bei Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDCF2 (RXBUF_SINT(30)/1000.0f)
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDCF2_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDCF2_TYPE float
|
|
// External pressure in the event of a warning / Aussendruck beim Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDCF2 (RXBUF_UCHAR(32))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDCF2_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDCF2_TYPE unsigned char
|
|
// Wheel electronics status of the wheel causing the breakdown / Radelektronik-Status des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDCF2 (RXBUF_UCHAR(33))
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDCF2_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDCF2_TYPE unsigned char
|
|
// Wheel position of the wheel causing the breakdown / Radposition des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDCF2 (RXBUF_UCHAR(34))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDCF2_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDCF2_TYPE unsigned char
|
|
// Wheel position RE0 / Radposition RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDCF2 (RXBUF_SINT(35)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDCF2_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDCF2_TYPE float
|
|
// Filling pressure value RE0 / Befuelldruckwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDCF2 (RXBUF_SCHAR(37))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDCF2_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDCF2_TYPE char
|
|
// Filling temperature value RE0 / Befuelltemperaturwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDCF2 (RXBUF_SINT(38)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDCF2_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDCF2_TYPE float
|
|
// Tire pressure RE0 / Reifenddruck RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDCF2 (RXBUF_SCHAR(40))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDCF2_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDCF2_TYPE char
|
|
// Tire temperature RE0 / Reifentemperatur RE0
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDCF2 (RXBUF_UCHAR(41))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDCF2_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDCF2_TYPE unsigned char
|
|
// Wheel position RE1 / Radposition RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDCF2 (RXBUF_SINT(42)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDCF2_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDCF2_TYPE float
|
|
// Filling pressure value RE1 / Befuelldruckwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDCF2 (RXBUF_SCHAR(44))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDCF2_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDCF2_TYPE char
|
|
// Filling temperature value RE1 / Befuelltemperaturwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDCF2 (RXBUF_SINT(45)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDCF2_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDCF2_TYPE float
|
|
// Tire pressure RE1 / Reifenddruck RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDCF2 (RXBUF_SCHAR(47))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDCF2_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDCF2_TYPE char
|
|
// Tire temperature RE1 / Reifentemperatur RE1
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDCF2 (RXBUF_UCHAR(48))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDCF2_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDCF2_TYPE unsigned char
|
|
// Wheel position RE2 / Radposition RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDCF2 (RXBUF_SINT(49)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDCF2_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDCF2_TYPE float
|
|
// Filling pressure value RE2 / Befuelldruckwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDCF2 (RXBUF_SCHAR(51))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDCF2_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDCF2_TYPE char
|
|
// Filling temperature value RE2 / Befuelltemperaturwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDCF2 (RXBUF_SINT(52)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDCF2_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDCF2_TYPE float
|
|
// Tire pressure RE2 / Reifenddruck RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDCF2 (RXBUF_SCHAR(54))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDCF2_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDCF2_TYPE char
|
|
// Tire temperature RE2 / Reifentemperatur RE2
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDCF2 (RXBUF_UCHAR(55))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDCF2_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDCF2_TYPE unsigned char
|
|
// Wheel position RE3 / Radposition RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDCF2 (RXBUF_SINT(56)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDCF2_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDCF2_TYPE float
|
|
// Filling pressure value RE3 / Befuelldruckwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDCF2 (RXBUF_SCHAR(58))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDCF2_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDCF2_TYPE char
|
|
// Filling temperature value RE3 / Befuelltemperaturwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDCF2 (RXBUF_SINT(59)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDCF2_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDCF2_TYPE float
|
|
// Tire pressure RE3 / Reifenddruck RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDCF2 (RXBUF_SCHAR(61))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDCF2_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDCF2_TYPE char
|
|
// Tire temperature RE3 / Reifentemperatur RE3
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARNEREIGNIS_WERT_0XDCF2 (RXBUF_UCHAR(62))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARNEREIGNIS_WERT_0XDCF2_TYPE unsigned char
|
|
// Warning events counter / Zaehler Warnereignisse
|
|
|
|
#define I3_PID_DSC_RDC_HS_WARNEREIGNIS_WEICH_3 0xDCF3
|
|
// RDC_HS_WARNEREIGNIS_WEICH_3 / RDC_HS_WARNEREIGNIS_WEICH_3
|
|
|
|
// Can't yet generate code for STAT_DATUM_TEXT_0XDCF3 of type string[9], at offset 0. But we account for the 9 bytes
|
|
// Date of the warning event. 99.99.99 => invalid / Datum zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
// Can't yet generate code for STAT_UHRZEIT_TEXT_0XDCF3 of type string[9], at offset 9. But we account for the 9 bytes
|
|
// Time of the warning event. 99.99.99 => invalid / Uhrzeit zum Warnereignis. 99.99.99 => ungültig
|
|
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDCF3 (RXBUF_SINT32(18))
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDCF3_UNIT 'km'
|
|
#define I3_RES_DSC_STAT_KILOMETERSTAND_WERT_0XDCF3_TYPE long
|
|
// Mileage (-999999 km => invalid) / Kilometerstand (-999999 km => ungueltig)
|
|
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDCF3 (RXBUF_UINT32(22))
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDCF3_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_SYSTEMFLAGS_WERT_0XDCF3_TYPE unsigned long
|
|
// System flags / Systemflags
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDCF3 (RXBUF_SCHAR(26))
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDCF3_UNIT '°'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENTEMPERATUR_WERT_0XDCF3_TYPE char
|
|
// Outside temperature when filling / Aussentemperatur beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDCF3 (RXBUF_SINT(27)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDCF3_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELL_AUSSENDRUCK_WERT_0XDCF3_TYPE float
|
|
// External pressure when filling / Aussendruck beim Befüllen
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDCF3 (RXBUF_SCHAR(29))
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDCF3_UNIT '°'
|
|
#define I3_RES_DSC_STAT_AUSSENTEMPERATUR_WERT_0XDCF3_TYPE char
|
|
// Outside temperature at warning event / Aussentemperatur bei Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDCF3 (RXBUF_SINT(30)/1000.0f)
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDCF3_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_AUSSENDRUCK_WERT_0XDCF3_TYPE float
|
|
// External pressure in the event of a warning / Aussendruck beim Warnereignis
|
|
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDCF3 (RXBUF_UCHAR(32))
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDCF3_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_RADELEKTRONIK_STATUS_PANNENRAD_WERT_0XDCF3_TYPE unsigned char
|
|
// Wheel electronics status of the wheel causing the breakdown / Radelektronik-Status des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDCF3 (RXBUF_UCHAR(33))
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDCF3_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITION_PANNENRAD_0XDCF3_TYPE unsigned char
|
|
// Wheel position of the wheel causing the breakdown / Radposition des Pannenauslösenden Rades
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDCF3 (RXBUF_UCHAR(34))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDCF3_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE0_0XDCF3_TYPE unsigned char
|
|
// Wheel position RE0 / Radposition RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDCF3 (RXBUF_SINT(35)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDCF3_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE0_WERT_0XDCF3_TYPE float
|
|
// Filling pressure value RE0 / Befuelldruckwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDCF3 (RXBUF_SCHAR(37))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDCF3_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE0_WERT_0XDCF3_TYPE char
|
|
// Filling temperature value RE0 / Befuelltemperaturwert RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDCF3 (RXBUF_SINT(38)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDCF3_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE0_WERT_0XDCF3_TYPE float
|
|
// Tire pressure RE0 / Reifenddruck RE0
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDCF3 (RXBUF_SCHAR(40))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDCF3_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE0_WERT_0XDCF3_TYPE char
|
|
// Tire temperature RE0 / Reifentemperatur RE0
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDCF3 (RXBUF_UCHAR(41))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDCF3_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE1_0XDCF3_TYPE unsigned char
|
|
// Wheel position RE1 / Radposition RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDCF3 (RXBUF_SINT(42)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDCF3_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE1_WERT_0XDCF3_TYPE float
|
|
// Filling pressure value RE1 / Befuelldruckwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDCF3 (RXBUF_SCHAR(44))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDCF3_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE1_WERT_0XDCF3_TYPE char
|
|
// Filling temperature value RE1 / Befuelltemperaturwert RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDCF3 (RXBUF_SINT(45)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDCF3_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE1_WERT_0XDCF3_TYPE float
|
|
// Tire pressure RE1 / Reifenddruck RE1
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDCF3 (RXBUF_SCHAR(47))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDCF3_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE1_WERT_0XDCF3_TYPE char
|
|
// Tire temperature RE1 / Reifentemperatur RE1
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDCF3 (RXBUF_UCHAR(48))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDCF3_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE2_0XDCF3_TYPE unsigned char
|
|
// Wheel position RE2 / Radposition RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDCF3 (RXBUF_SINT(49)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDCF3_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE2_WERT_0XDCF3_TYPE float
|
|
// Filling pressure value RE2 / Befuelldruckwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDCF3 (RXBUF_SCHAR(51))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDCF3_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE2_WERT_0XDCF3_TYPE char
|
|
// Filling temperature value RE2 / Befuelltemperaturwert RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDCF3 (RXBUF_SINT(52)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDCF3_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE2_WERT_0XDCF3_TYPE float
|
|
// Tire pressure RE2 / Reifenddruck RE2
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDCF3 (RXBUF_SCHAR(54))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDCF3_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE2_WERT_0XDCF3_TYPE char
|
|
// Tire temperature RE2 / Reifentemperatur RE2
|
|
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDCF3 (RXBUF_UCHAR(55))
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDCF3_UNIT '0-n'
|
|
#define I3_RES_DSC_STAT_RADPOSITON_RE3_0XDCF3_TYPE unsigned char
|
|
// Wheel position RE3 / Radposition RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDCF3 (RXBUF_SINT(56)/1000.0f)
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDCF3_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_BEFUELLDRUCK_RE3_WERT_0XDCF3_TYPE float
|
|
// Filling pressure value RE3 / Befuelldruckwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDCF3 (RXBUF_SCHAR(58))
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDCF3_UNIT '°C'
|
|
#define I3_RES_DSC_STAT_BEFUELLTEMPERATUR_RE3_WERT_0XDCF3_TYPE char
|
|
// Filling temperature value RE3 / Befuelltemperaturwert RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDCF3 (RXBUF_SINT(59)/1000.0f)
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDCF3_UNIT 'bar'
|
|
#define I3_RES_DSC_STAT_REIFENDRUCK_RE3_WERT_0XDCF3_TYPE float
|
|
// Tire pressure RE3 / Reifenddruck RE3
|
|
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDCF3 (RXBUF_SCHAR(61))
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDCF3_UNIT '°'
|
|
#define I3_RES_DSC_STAT_REIFENTEMPERATUR_RE3_WERT_0XDCF3_TYPE char
|
|
// Tire temperature RE3 / Reifentemperatur RE3
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARNEREIGNIS_WERT_0XDCF3 (RXBUF_UCHAR(62))
|
|
#define I3_RES_DSC_STAT_ZAEHLER_WARNEREIGNIS_WERT_0XDCF3_TYPE unsigned char
|
|
// Warning events counter / Zaehler Warnereignisse
|
|
|
|
// Skipping AUSGANG_LLP on 0xDD0C which takes arguments
|
|
|
|
#define I3_PID_DSC_STATUS_AUTO_EPB_ZAEHLER 0xDD1B
|
|
// Indicates how often the roll-away protection was active. / Gibt an, wie oft die Wegrollsicherung aktiv war.
|
|
|
|
#define I3_RES_DSC_STAT_AUTO_EPB_ZAEHLER_WERT (RXBUF_UINT(0))
|
|
#define I3_RES_DSC_STAT_AUTO_EPB_ZAEHLER_WERT_TYPE unsigned short
|
|
// Indicates how often the roll-away protection was active. / Gibt an, wie oft die Wegrollsicherung aktiv war.
|
|
|
|
#define I3_PID_DSC_EXTERNE_ANFORDERUNG_EPB_ZAEHLER_LESEN 0xE354
|
|
// Returns the number of EPB activations by external transmission requests / Gibt Anzahl der EPB-Aktivierungen
|
|
// durch externe Getriebe-Anforderungen zurück
|
|
|
|
#define I3_RES_DSC_STAT_ZAEHLERSTAND_EPB_AKTIVIERUNG_WERT (RXBUF_UINT(0))
|
|
#define I3_RES_DSC_STAT_ZAEHLERSTAND_EPB_AKTIVIERUNG_WERT_TYPE unsigned short
|
|
// Returns the number of EPB activations by external transmission requests / Gibt Anzahl der EPB-Aktivierungen
|
|
// durch externe Getriebe-Anforderungen zurück
|
|
|
|
#define I3_PID_DSC__SW_IDENTIFIKATION 0x4000
|
|
// 11 bytes software identification / 11 Bytes SW-Identifikation
|
|
|
|
// Can't yet generate code for STAT_SW_DATA of type data[11] at offset 0. But we account for the 11 bytes
|
|
// 11 bytes software identification / 11 Bytes SW-Identifikation
|
|
|
|
#define I3_PID_DSC_FAHRZEUGZUSTAND 0x5002
|
|
// Image of the Flexray signal ST_VEH_CON / Abbild des Flexraysignals ST_VEH_CON
|
|
|
|
#define I3_RES_DSC_STAT_FAHRZEUGZUSTAND_WERT (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_FAHRZEUGZUSTAND_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_FAHRZEUGZUSTAND_WERT_TYPE unsigned char
|
|
// Image of the Flexray signal ST_VEH_CON / Abbild des Flexraysignals ST_VEH_CON
|
|
|
|
#define I3_PID_DSC_ANTRIEBSZUSTAND 0x5004
|
|
// Image of the Flexray signal ST_DRV_VEH / Abbild des Flexraysignals ST_DRV_VEH
|
|
|
|
#define I3_RES_DSC_STAT_ANTRIEBSZUSTAND_WERT (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_ANTRIEBSZUSTAND_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_ANTRIEBSZUSTAND_WERT_TYPE unsigned char
|
|
// Image of the Flexray signal ST_DRV_VEH / Abbild des Flexraysignals ST_DRV_VEH
|
|
|
|
#define I3_PID_DSC_SPANNUNGSMASTER_VERFUEGBAR 0x5008
|
|
// Voltage master available (see description of voltage threshold client) and decision logic error cause (bit 0:
|
|
// availability of voltage master; bit 4 = 1: DSC internal error as cause; bit 5 = 1: BBx error or RDCI error as
|
|
// cause; bits 1,2,3,6 , 7 not used) / Spannungsmaster verfügbar (siehe Beschreibung Spannungsschwellenclient)
|
|
// und Entscheidungslogik Fehlerursache (Bit 0: Verfügbarkeit der Spannungsmaster; Bit 4 = 1: DSC interner Fehler
|
|
// als Ursache; Bit 5 = 1: BBx Fehler oder RDCI Fehler als Ursache; Bits 1,2,3,6,7 nicht genutzt)
|
|
|
|
#define I3_RES_DSC_STAT_SPANNUNGSMASTER_VERFUEGBAR_WERT (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_SPANNUNGSMASTER_VERFUEGBAR_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_SPANNUNGSMASTER_VERFUEGBAR_WERT_TYPE unsigned char
|
|
// Voltage master available (see description of voltage threshold client) and decision logic error cause (bit 0:
|
|
// availability of voltage master; bit 4 = 1: DSC internal error as cause; bit 5 = 1: BBx error or RDCI error as
|
|
// cause; bits 1,2,3,6 , 7 not used) / Spannungsmaster verfügbar (siehe Beschreibung Spannungsschwellenclient)
|
|
// und Entscheidungslogik Fehlerursache (Bit 0: Verfügbarkeit der Spannungsmaster; Bit 4 = 1: DSC interner Fehler
|
|
// als Ursache; Bit 5 = 1: BBx Fehler oder RDCI Fehler als Ursache; Bits 1,2,3,6,7 nicht genutzt)
|
|
|
|
#define I3_PID_DSC_FUNKTIONSZUSTAND 0x500B
|
|
// Functional status of the controller: ABS, ASC, FDR, GMV, ECBA, IBrake, start-up assistant, autohold, EMF
|
|
// status, image of the flexray signal ST_BRG_DV, direction of travel / Funktionszustand der Regler: ABS, ASC,
|
|
// FDR, GMV, ECBA, IBrake, Anfahrassistent, Autohold, EMF-Zustand, Abbild des Flexraysignals ST_BRG_DV,
|
|
// Fahrtrichtung
|
|
|
|
#define I3_RES_DSC_STAT_FUNKTIONSZUSTAND_WERT (RXBUF_UINT(0))
|
|
#define I3_RES_DSC_STAT_FUNKTIONSZUSTAND_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_FUNKTIONSZUSTAND_WERT_TYPE unsigned short
|
|
// Functional status of the controller: ABS, ASC, FDR, GMV, ECBA, IBrake, start-up assistant, autohold, EMF
|
|
// status, image of the flexray signal ST_BRG_DV, direction of travel / Funktionszustand der Regler: ABS, ASC,
|
|
// FDR, GMV, ECBA, IBrake, Anfahrassistent, Autohold, EMF-Zustand, Abbild des Flexraysignals ST_BRG_DV,
|
|
// Fahrtrichtung
|
|
|
|
#define I3_PID_DSC_INTERNER_FUNKTIONSZUSTAND 0x500C
|
|
// ECU internal status / Steuergeräte interner Zustand
|
|
|
|
#define I3_RES_DSC_STAT_INTERNER_FUNKTIONSZUSTAND_WERT (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_INTERNER_FUNKTIONSZUSTAND_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_INTERNER_FUNKTIONSZUSTAND_WERT_TYPE unsigned char
|
|
// ECU internal status / Steuergeräte interner Zustand
|
|
|
|
#define I3_PID_DSC_FEHLERSPEICHERSPERRE_AKTIV 0x500F
|
|
// Image of the Flexray signal ST_ILK_ERRM_FZM (fault memory lock) / Abbild des Flexraysignals ST_ILK_ERRM_FZM
|
|
// (Fehlerspeichersperre)
|
|
|
|
#define I3_RES_DSC_STAT_FEHLERSPEICHERSPERRE_AKTIV (RXBUF_UCHAR(0))
|
|
#define I3_RES_DSC_STAT_FEHLERSPEICHERSPERRE_AKTIV_UNIT '0/1'
|
|
#define I3_RES_DSC_STAT_FEHLERSPEICHERSPERRE_AKTIV_TYPE unsigned char
|
|
// Image of the Flexray signal ST_ILK_ERRM_FZM (fault memory lock) / Abbild des Flexraysignals ST_ILK_ERRM_FZM
|
|
// (Fehlerspeichersperre)
|
|
|
|
#define I3_PID_DSC_NETZWERK_ROHDATEN 0x5010
|
|
// NETWORK_ROHDATEN UWB / NETZWERK_ROHDATEN UWB
|
|
|
|
#define I3_RES_DSC_STAT_ROHDATEN_WERT (RXBUF_SINT32(0))
|
|
#define I3_RES_DSC_STAT_ROHDATEN_WERT_UNIT 'HEX'
|
|
#define I3_RES_DSC_STAT_ROHDATEN_WERT_TYPE long
|
|
// NETWORK_ROHDATEN UWB / NETZWERK_ROHDATEN UWB
|