113 lines
3.2 KiB
Plaintext
113 lines
3.2 KiB
Plaintext
wolfSSL/AlphaProject Boad demo setup Guide
|
|
|
|
This demo is tested with the following condition.
|
|
|
|
Renesas : CS+ v6.01, v8.01
|
|
Board : AP-RX71M-0A
|
|
wolfSSL : 3.15.3, 4.0.0
|
|
|
|
Setup process:
|
|
1. Download software
|
|
- Unzip AlphaProject firmware
|
|
- Unzip wolfssl under the same directory
|
|
|
|
2. Set up wolfSSL
|
|
- open wolfssl\IDE\Renesas\cs+\Projec/wolfssl\lib.mtpj with CS+ and build
|
|
- open t4_demo.mtpj and build. This create demo program library.
|
|
|
|
3. Set up AlphaProject
|
|
|
|
!!** When you use version 2.0 of a sample program, **!!
|
|
!!** please replace _ether_ to _usbfunc_ **!!
|
|
|
|
- The demo uses ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\
|
|
ap_rx71m_0a_ether_sample_cs.mtpj
|
|
- Open and edit ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\src\AP_RX71M_0A.c
|
|
insert wolfSSL_init() in echo_srv_init().
|
|
|
|
===
|
|
sci_init();
|
|
can_init();
|
|
echo_srv_init();
|
|
wolfSSL_init(); <- insert this line
|
|
===
|
|
!!** when you use version 2.0 **!!
|
|
===
|
|
CanInit();
|
|
SciInit();
|
|
EthernetAppInit();
|
|
UsbfInit();
|
|
wolfSSL_init(); <- insert this line
|
|
===
|
|
!!******************************!!
|
|
|
|
- Modify stack and heap size in ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\src\r_config
|
|
Line 120#pragma stacksize su=0x2000
|
|
Line 139 #define BSP_CFG_HEAP_BYTES (0xa000)
|
|
|
|
!!** when you use version 2.0 **!!
|
|
- Modify stack and heap size in ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_usbfunc_sample_cs\src\smc_gen\r_bsp_config.h
|
|
Line 154#pragma stacksize su=0x2000
|
|
Line 175#define BSP_CFG_HEAP_BYTES (0xa000)
|
|
!!******************************!!
|
|
|
|
- Modify IP address Sample\ap_rx71m_0a_ether_sample_cs\src\r_t4_rx\src\config_tcpudp.c
|
|
as needed
|
|
!!** when you use version 2.0 **!!
|
|
- Modify IP address Sample\ap_rx71m_0a_usbfunc_sample_cs\src\tcp_sample\src\config_tcpudp.c
|
|
as needed
|
|
!!******************************!!
|
|
|
|
===
|
|
#define MY_IP_ADDR0 192,168,1,200 /* Local IP address */
|
|
#define GATEWAY_ADDR0 192,168,1,254 /* Gateway address (invalid if all 0s) */
|
|
#define SUBNET_MASK0 255,255,255,0
|
|
===
|
|
|
|
- Add project properties of linking library in ap_rx71m_0a_ether_sample_cs.mtpj
|
|
|
|
wolfssl\IDE\Renesas\cs+\Projects\wolfssl_lib\DefaultBuild\wolfssl_lib.lib
|
|
wolfssl\IDE\Renesas\cs+\Projects\t4_demo\DefaultBuild\t4_demo.lib
|
|
|
|
- Set CC-RX(Build Tool)->Library Geberation->Library Configuration to"C99" and enable ctype.h.
|
|
|
|
- Build the project and start execute. You see message on the console prompting command.
|
|
|
|
===
|
|
wolfSSL Demo
|
|
t: test, b: benchmark, s: server, or c <IP addr> <Port>: client
|
|
$
|
|
===
|
|
|
|
Command can be executed only once. You need to reset and restart MPU for following command.
|
|
|
|
Command instruction:
|
|
t: Crypt algorithm test
|
|
b: benchmark
|
|
s: simple server acceptint at port 50000
|
|
c: simple client. Specify IP address and port as following.
|
|
c <IP Addr> <Port Num>
|
|
|
|
|
|
4. Testing TLS Connection
|
|
You can use wolfssl/examples/server and client on your PC for TLS peer test.
|
|
|
|
|
|
PC side
|
|
$ ./examples/server/server -b -d
|
|
|
|
Board side
|
|
> c <IP Addr> 11111
|
|
|
|
Board side
|
|
> s
|
|
|
|
PC side
|
|
$ ./examples/client/client -h <IP Addr> -p 50000
|
|
|
|
---
|
|
If you have any question, please contact support@wolfssl.com.
|
|
|
|
wolfSSL Inc.
|
|
|