40 lines
1.4 KiB
Plaintext
40 lines
1.4 KiB
Plaintext
================================================================================
|
|
CANopen shell commands
|
|
================================================================================
|
|
|
|
Show status report:
|
|
copen status
|
|
|
|
Start / stop workers:
|
|
copen <bus> start
|
|
copen <bus> stop
|
|
- stop will fail if clients are still running.
|
|
|
|
Send NMT commands:
|
|
copen <bus> nmt <start|stop|preop|reset|commreset> [id=0] [timeout_ms=0]
|
|
- id 0 = broadcast
|
|
- timeout > 0: wait for state change (heartbeat), 3 tries
|
|
Note: state change response is not a mandatory CANopen feature.
|
|
|
|
Read SDO:
|
|
copen <bus> readsdo <id> <index_hex> <subindex_hex> [timeout_ms=50]
|
|
- index & subindex: hexadecimal without "0x" or "h"
|
|
- defaults to 3 tries on timeout
|
|
|
|
Write SDO:
|
|
copen <bus> writesdo <id> <index_hex> <subindex_hex> <value> [timeout_ms=50]
|
|
- index & subindex: hexadecimal without "0x" or "h"
|
|
- value: prefix "0x" = hex, else decimal, string if no decimal
|
|
- defaults to 3 tries on timeout
|
|
|
|
Show node core attributes:
|
|
copen <bus> info <id> [timeout_ms=50]
|
|
- prints device type, error register, device name etc.
|
|
Note: some attributes read are optional and may be empty/zero.
|
|
|
|
Scan bus for nodes:
|
|
copen <bus> scan [[startid=1][-][endid=127]] [timeout_ms=50]
|
|
- loops "info" over multiple node ids (default: all)
|
|
Note: a full scan with default timeout takes ~20 seconds
|
|
|