diff --git a/OVMS.V3/components/vehicle_renaultzoe_ph2/docs/index.rst b/OVMS.V3/components/vehicle_renaultzoe_ph2/docs/index.rst
index 2b4743e..e1140b7 100644
--- a/OVMS.V3/components/vehicle_renaultzoe_ph2/docs/index.rst
+++ b/OVMS.V3/components/vehicle_renaultzoe_ph2/docs/index.rst
@@ -1,10 +1,11 @@
 =======================
-Renault Zoe
+Renault Zoe Phase 2
 =======================
 
 Vehicle Type: **RZ2**
 
-This vehicle type supports the Renault Zoe(PH2)
+This vehicle type supports the Renault Zoe(PH2) through OBD connection. 
+All values are read-only, no control possible because of CAN Gateway.
 
 ----------------
 Support Overview
@@ -13,23 +14,35 @@ Support Overview
 =========================== ==============
 Function                    Support Status
 =========================== ==============
-Hardware                    OVMS v3 (or later)
-Vehicle Cable               OBD-II to DB9 Data Cable for OVMS (1441200 right, or 1139300 left)
+Hardware                    OVMS v3.3
+Vehicle Cable               OBD-II to DB9 Data Cable for OVMS (Generic OBD2 Cable (left))
 GSM Antenna                 1000500 Open Vehicles OVMS GSM Antenna (or any compatible antenna)
 GPS Antenna                 1020200 Universal GPS Antenna (SMA Connector) (or any compatible antenna)
 SOC Display                 Yes
 Range Display               Yes
 GPS Location                Yes (from modem module GPS)
 Speed Display               Yes
-Temperature Display         Yes (External Temp and Battery)
+Temperature Display         Yes (Battery, Outside, Cabin, Motor, Inverter, Tyres)
 BMS v+t Display             Yes
-TPMS Display Zoe            No
-TPMS Display Kangoo         No
+TPMS Display Zoe            Yes (Pressure and temperature)
 Charge Status Display       Yes
-Charge Interruption Alerts  No
-Charge Control              No
-Cabin Pre-heat/cool Control No
-Lock/Unlock Vehicle         No
+Charge Interruption Alerts  Yes
+Charge Control              No (planned, but access to CAN after gw neccessary)
+Cabin Pre-heat/cool Control No (planned, but access to CAN after gw neccessary)
+Lock/Unlock Vehicle         Yes (display only)
 Valet Mode Control          No
-Others
 =========================== ==============
+Others:
+
+Door open/close                     Yes (exclude hood)
+Battery full charge cycles          Yes
+Battery max charge, recd pwr        Yes
+Trip counter from Car               No (is included, but datapoint is extremly unreliable for now)
+Battery lifetime gauges             Yes (Charged, Recd and Used kWh)
+Heat pump power, rpm and hp press.  Yes
+Aux power gauges                    Yes (but not perfectly reliable)
+Charge type                         Yes
+Headlights Status                   No (but planned)
+Ambiet Pressure                     Yes (seems to be a fixed value, removed later if its true)
+Charge efficiency calculation       Yes (but only for AC, pf is measured with power analyzer and included as statics)
+