OVMS3-idf/examples/protocols
2019-11-26 20:01:50 +08:00
..
asio esp_netif and examples: using wifi driver handle, update examples and tests to pass the CI 2019-11-13 12:36:25 +01:00
cbor cbor: add tinycbor library and example 2019-08-22 17:44:29 +08:00
coap_client examples: protocol examples which use common connection component 2019-11-13 12:36:25 +01:00
coap_server examples: protocol examples which use common connection component 2019-11-13 12:36:25 +01:00
esp_http_client examples: protocol examples which use common connection component 2019-11-13 12:36:25 +01:00
esp_local_ctrl esp_netif: example init code fixed to assert only variables, not 2019-11-13 12:36:25 +01:00
http2_request examples: protocol examples which use common connection component 2019-11-13 12:36:25 +01:00
http_request examples: protocol examples which use common connection component 2019-11-13 12:36:25 +01:00
http_server Merge branch 'docs/update_oocd_config_on_cmd_line' into 'master' 2019-11-22 05:32:35 +08:00
https_mbedtls examples: protocol examples which use common connection component 2019-11-13 12:36:25 +01:00
https_request examples: protocol examples which use common connection component 2019-11-13 12:36:25 +01:00
https_server esp_netif: include tcpip_adapter legacy header by default to provide *implicit* compatiblity 2019-11-13 12:36:25 +01:00
icmp_echo feature: Add uart hal support. 2019-11-26 20:01:50 +08:00
mdns mdns: update mdns to use esp-netif for mdns supported services such as STA, AP, ETH 2019-11-13 12:36:25 +01:00
modbus/serial freemodbus: fix supported targets ci issue 2019-11-26 09:07:47 +01:00
modbus_master/main freemodbus: add modbus master ascii 2019-11-26 13:16:25 +08:00
modbus_slave freemodbus: add modbus master ascii 2019-11-26 13:16:25 +08:00
mqtt esp_netif: include tcpip_adapter legacy header by default to provide *implicit* compatiblity 2019-11-13 12:36:25 +01:00
openssl_client examples: protocol examples which use common connection component 2019-11-13 12:36:25 +01:00
openssl_server examples: protocol examples which use common connection component 2019-11-13 12:36:25 +01:00
pppos_client feature: Add uart hal support. 2019-11-26 20:01:50 +08:00
sntp examples: protocol examples which use common connection component 2019-11-13 12:36:25 +01:00
sockets esp_netif: update default DHCP IP addresses to be in line with old interface, added loopback implementation, explicit esp-netif init, sanity checks for parameters added 2019-11-13 12:36:25 +01:00
websocket examples: protocol examples which use common connection component 2019-11-13 12:36:25 +01:00
README.md build system: Use CMake-based build system as default when describing commands 2019-07-08 17:31:27 +10:00

Protocols Examples

Implementation of internet communication protocols and services.

See the README.md file in the upper level examples directory for more information about examples.

Establishing Wi-Fi or Ethernet Connection

About the example_connect() Function

Protocols examples use a simple helper function, example_connect(), to establish Wi-Fi or Ethernet connection. This function is implemented in examples/common_components/protocol_examples/common/connect.c, and has a very simple behavior: block until connection is established and IP address is obtained, then return. This function is used to reduce the amount of boilerplate and to keep the example code focused on the protocol or library being demonstrated.

The simple example_connect() function does not handle timeouts, does not gracefully handle various error conditions, and is only suited for use in examples. When developing real applications, this helper function needs to be replaced with full Wi-Fi / Ethernet connection handling code. Such code can be found in examples/wifi/getting_started/ and examples/ethernet/basic/ examples.

Configuring the Example

To configure the example to use Wi-Fi or Ethernet connection, open the project configuration menu (idf.py menuconfig) and navigate to "Example Connection Configuration" menu. Select either "Wi-Fi" or "Ethernet" in the "Connect using" choice.

When connecting using Wi-Fi, enter SSID and password of your Wi-Fi access point into the corresponding fields. If connecting to an open Wi-Fi network, keep the password field empty.

When connecting using Ethernet, set up PHY type and configuration in the provided fields. If using Ethernet for the first time, it is recommended to start with the Ethernet example readme, which contains instructions for connecting and configuring the PHY. Once Ethernet example obtains IP address successfully, proceed to the protocols example and set the same configuration options.

Disabling IPv6

By default, example_connect() function waits until Wi-Fi or Ethernet connection is established, and IPv4 address and IPv6 link-local address are obtained. In network environments where IPv6 link-local address cannot be obtained, disable "Obtain IPv6 link-local address" option found in "Example Connection Configuration" menu.