405 lines
13 KiB
C
405 lines
13 KiB
C
/*
|
|
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
|
* Copyright (c) 2013 China Beijing Armink <armink.ztl@gmail.com>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* File: $Id: mbrtu_m.c,v 1.60 2013/08/17 11:42:56 Armink Add Master Functions $
|
|
*/
|
|
|
|
/* ----------------------- System includes ----------------------------------*/
|
|
#include "stdlib.h"
|
|
#include "string.h"
|
|
#include "stdio.h"
|
|
|
|
/* ----------------------- Platform includes --------------------------------*/
|
|
#include "port.h"
|
|
|
|
/* ----------------------- Modbus includes ----------------------------------*/
|
|
|
|
#include "mb_m.h"
|
|
#include "mbrtu.h"
|
|
#include "mbframe.h"
|
|
|
|
#include "mbcrc.h"
|
|
#include "mbport.h"
|
|
|
|
/* ----------------------- Defines ------------------------------------------*/
|
|
#define MB_RTU_SER_PDU_SIZE_MIN 4 /*!< Minimum size of a Modbus RTU frame. */
|
|
|
|
/* ----------------------- Type definitions ---------------------------------*/
|
|
typedef enum
|
|
{
|
|
STATE_M_RX_INIT, /*!< Receiver is in initial state. */
|
|
STATE_M_RX_IDLE, /*!< Receiver is in idle state. */
|
|
STATE_M_RX_RCV, /*!< Frame is beeing received. */
|
|
STATE_M_RX_ERROR, /*!< If the frame is invalid. */
|
|
} eMBMasterRcvState;
|
|
|
|
typedef enum
|
|
{
|
|
STATE_M_TX_IDLE, /*!< Transmitter is in idle state. */
|
|
STATE_M_TX_XMIT, /*!< Transmitter is in transfer state. */
|
|
STATE_M_TX_XFWR, /*!< Transmitter is in transfer finish and wait receive state. */
|
|
} eMBMasterSndState;
|
|
|
|
#if MB_MASTER_RTU_ENABLED > 0
|
|
/*------------------------ Shared variables ---------------------------------*/
|
|
extern volatile UCHAR ucMasterRcvBuf[];
|
|
extern volatile UCHAR ucMasterSndBuf[];
|
|
|
|
/* ----------------------- Static variables ---------------------------------*/
|
|
static volatile eMBMasterSndState eSndState;
|
|
static volatile eMBMasterRcvState eRcvState;
|
|
|
|
static volatile UCHAR *pucMasterSndBufferCur;
|
|
static volatile USHORT usMasterSndBufferCount;
|
|
static volatile USHORT usMasterRcvBufferPos;
|
|
|
|
static volatile UCHAR *ucMasterRTURcvBuf = ucMasterRcvBuf;
|
|
static volatile UCHAR *ucMasterRTUSndBuf = ucMasterSndBuf;
|
|
|
|
/* ----------------------- Start implementation -----------------------------*/
|
|
eMBErrorCode
|
|
eMBMasterRTUInit(UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity )
|
|
{
|
|
eMBErrorCode eStatus = MB_ENOERR;
|
|
ULONG usTimerT35_50us;
|
|
|
|
ENTER_CRITICAL_SECTION( );
|
|
|
|
/* Modbus RTU uses 8 Databits. */
|
|
if( xMBMasterPortSerialInit( ucPort, ulBaudRate, 8, eParity ) != TRUE )
|
|
{
|
|
eStatus = MB_EPORTERR;
|
|
}
|
|
else
|
|
{
|
|
/* If baudrate > 19200 then we should use the fixed timer values
|
|
* t35 = 1750us. Otherwise t35 must be 3.5 times the character time.
|
|
*/
|
|
if( ulBaudRate > 19200 )
|
|
{
|
|
usTimerT35_50us = 35; /* 1800us. */
|
|
}
|
|
else
|
|
{
|
|
/* The timer reload value for a character is given by:
|
|
*
|
|
* ChTimeValue = Ticks_per_1s / ( Baudrate / 11 )
|
|
* = 11 * Ticks_per_1s / Baudrate
|
|
* = 220000 / Baudrate
|
|
* The reload for t3.5 is 1.5 times this value and similary
|
|
* for t3.5.
|
|
*/
|
|
usTimerT35_50us = ( 7UL * 220000UL ) / ( 2UL * ulBaudRate );
|
|
}
|
|
if( xMBMasterPortTimersInit( ( USHORT ) usTimerT35_50us ) != TRUE )
|
|
{
|
|
eStatus = MB_EPORTERR;
|
|
}
|
|
}
|
|
EXIT_CRITICAL_SECTION( );
|
|
|
|
return eStatus;
|
|
}
|
|
|
|
void
|
|
eMBMasterRTUStart( void )
|
|
{
|
|
ENTER_CRITICAL_SECTION( );
|
|
/* Initially the receiver is in the state STATE_M_RX_INIT. we start
|
|
* the timer and if no character is received within t3.5 we change
|
|
* to STATE_M_RX_IDLE. This makes sure that we delay startup of the
|
|
* modbus protocol stack until the bus is free.
|
|
*/
|
|
eRcvState = STATE_M_RX_IDLE; //STATE_M_RX_INIT (We start processing immediately)
|
|
vMBMasterPortSerialEnable( TRUE, FALSE );
|
|
vMBMasterPortTimersT35Enable( );
|
|
|
|
EXIT_CRITICAL_SECTION( );
|
|
}
|
|
|
|
void
|
|
eMBMasterRTUStop( void )
|
|
{
|
|
ENTER_CRITICAL_SECTION( );
|
|
vMBMasterPortSerialEnable( FALSE, FALSE );
|
|
vMBMasterPortTimersDisable( );
|
|
EXIT_CRITICAL_SECTION( );
|
|
}
|
|
|
|
eMBErrorCode
|
|
eMBMasterRTUReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame, USHORT * pusLength )
|
|
{
|
|
eMBErrorCode eStatus = MB_ENOERR;
|
|
|
|
ENTER_CRITICAL_SECTION( );
|
|
assert( usMasterRcvBufferPos < MB_SER_PDU_SIZE_MAX );
|
|
|
|
/* Length and CRC check */
|
|
if( ( usMasterRcvBufferPos >= MB_RTU_SER_PDU_SIZE_MIN )
|
|
&& ( usMBCRC16( ( UCHAR * ) ucMasterRTURcvBuf, usMasterRcvBufferPos ) == 0 ) )
|
|
{
|
|
/* Save the address field. All frames are passed to the upper layed
|
|
* and the decision if a frame is used is done there.
|
|
*/
|
|
*pucRcvAddress = ucMasterRTURcvBuf[MB_SER_PDU_ADDR_OFF];
|
|
|
|
/* Total length of Modbus-PDU is Modbus-Serial-Line-PDU minus
|
|
* size of address field and CRC checksum.
|
|
*/
|
|
*pusLength = ( USHORT )( usMasterRcvBufferPos - MB_SER_PDU_PDU_OFF - MB_SER_PDU_SIZE_CRC );
|
|
|
|
/* Return the start of the Modbus PDU to the caller. */
|
|
*pucFrame = ( UCHAR * ) & ucMasterRTURcvBuf[MB_SER_PDU_PDU_OFF];
|
|
}
|
|
else
|
|
{
|
|
eStatus = MB_EIO;
|
|
}
|
|
|
|
EXIT_CRITICAL_SECTION( );
|
|
return eStatus;
|
|
}
|
|
|
|
eMBErrorCode
|
|
eMBMasterRTUSend( UCHAR ucSlaveAddress, const UCHAR * pucFrame, USHORT usLength )
|
|
{
|
|
eMBErrorCode eStatus = MB_ENOERR;
|
|
USHORT usCRC16;
|
|
|
|
if ( ucSlaveAddress > MB_MASTER_TOTAL_SLAVE_NUM ) return MB_EINVAL;
|
|
|
|
ENTER_CRITICAL_SECTION( );
|
|
|
|
/* Check if the receiver is still in idle state. If not we where to
|
|
* slow with processing the received frame and the master sent another
|
|
* frame on the network. We have to abort sending the frame.
|
|
*/
|
|
if( eRcvState == STATE_M_RX_IDLE )
|
|
{
|
|
/* First byte before the Modbus-PDU is the slave address. */
|
|
pucMasterSndBufferCur = ( UCHAR * ) pucFrame - 1;
|
|
usMasterSndBufferCount = 1;
|
|
|
|
/* Now copy the Modbus-PDU into the Modbus-Serial-Line-PDU. */
|
|
pucMasterSndBufferCur[MB_SER_PDU_ADDR_OFF] = ucSlaveAddress;
|
|
usMasterSndBufferCount += usLength;
|
|
|
|
/* Calculate CRC16 checksum for Modbus-Serial-Line-PDU. */
|
|
usCRC16 = usMBCRC16( ( UCHAR * ) pucMasterSndBufferCur, usMasterSndBufferCount );
|
|
ucMasterRTUSndBuf[usMasterSndBufferCount++] = ( UCHAR )( usCRC16 & 0xFF );
|
|
ucMasterRTUSndBuf[usMasterSndBufferCount++] = ( UCHAR )( usCRC16 >> 8 );
|
|
|
|
/* Activate the transmitter. */
|
|
eSndState = STATE_M_TX_XMIT;
|
|
// The place to enable RS485 driver
|
|
vMBMasterPortSerialEnable( FALSE, TRUE );
|
|
}
|
|
else
|
|
{
|
|
eStatus = MB_EIO;
|
|
}
|
|
EXIT_CRITICAL_SECTION( );
|
|
return eStatus;
|
|
}
|
|
|
|
BOOL
|
|
xMBMasterRTUReceiveFSM( void )
|
|
{
|
|
BOOL xStatus = FALSE;
|
|
UCHAR ucByte;
|
|
|
|
assert(( eSndState == STATE_M_TX_IDLE ) || ( eSndState == STATE_M_TX_XFWR ));
|
|
|
|
/* Always read the character. */
|
|
xStatus = xMBMasterPortSerialGetByte( ( CHAR * ) & ucByte );
|
|
|
|
switch ( eRcvState )
|
|
{
|
|
/* If we have received a character in the init state we have to
|
|
* wait until the frame is finished.
|
|
*/
|
|
case STATE_M_RX_INIT:
|
|
vMBMasterPortTimersT35Enable( );
|
|
break;
|
|
|
|
/* In the error state we wait until all characters in the
|
|
* damaged frame are transmitted.
|
|
*/
|
|
case STATE_M_RX_ERROR:
|
|
vMBMasterPortTimersT35Enable( );
|
|
break;
|
|
|
|
/* In the idle state we wait for a new character. If a character
|
|
* is received the t1.5 and t3.5 timers are started and the
|
|
* receiver is in the state STATE_M_RX_RCV and disable early
|
|
* the timer of respond timeout .
|
|
*/
|
|
case STATE_M_RX_IDLE:
|
|
/* In time of respond timeout,the receiver receive a frame.
|
|
* Disable timer of respond timeout and change the transmiter state to idle.
|
|
*/
|
|
vMBMasterPortTimersDisable( );
|
|
eSndState = STATE_M_TX_IDLE;
|
|
|
|
usMasterRcvBufferPos = 0;
|
|
ucMasterRTURcvBuf[usMasterRcvBufferPos++] = ucByte;
|
|
eRcvState = STATE_M_RX_RCV;
|
|
|
|
/* Enable t3.5 timers. */
|
|
vMBMasterPortTimersT35Enable( );
|
|
break;
|
|
|
|
/* We are currently receiving a frame. Reset the timer after
|
|
* every character received. If more than the maximum possible
|
|
* number of bytes in a modbus frame is received the frame is
|
|
* ignored.
|
|
*/
|
|
case STATE_M_RX_RCV:
|
|
if( usMasterRcvBufferPos < MB_SER_PDU_SIZE_MAX )
|
|
{
|
|
ucMasterRTURcvBuf[usMasterRcvBufferPos++] = ucByte;
|
|
}
|
|
else
|
|
{
|
|
eRcvState = STATE_M_RX_ERROR;
|
|
}
|
|
vMBMasterPortTimersT35Enable( );
|
|
break;
|
|
}
|
|
return xStatus;
|
|
}
|
|
|
|
BOOL
|
|
xMBMasterRTUTransmitFSM( void )
|
|
{
|
|
BOOL xNeedPoll = TRUE;
|
|
BOOL xFrameIsBroadcast = FALSE;
|
|
|
|
assert( eRcvState == STATE_M_RX_IDLE );
|
|
|
|
switch ( eSndState )
|
|
{
|
|
/* We should not get a transmitter event if the transmitter is in
|
|
* idle state. */
|
|
case STATE_M_TX_XFWR:
|
|
xNeedPoll = FALSE;
|
|
break;
|
|
|
|
case STATE_M_TX_IDLE:
|
|
break;
|
|
|
|
case STATE_M_TX_XMIT:
|
|
/* check if we are finished. */
|
|
if( usMasterSndBufferCount != 0 )
|
|
{
|
|
xMBMasterPortSerialPutByte( ( CHAR )*pucMasterSndBufferCur );
|
|
pucMasterSndBufferCur++; /* next byte in sendbuffer. */
|
|
usMasterSndBufferCount--;
|
|
}
|
|
else
|
|
{
|
|
xFrameIsBroadcast = ( ucMasterRTUSndBuf[MB_SER_PDU_ADDR_OFF] == MB_ADDRESS_BROADCAST ) ? TRUE : FALSE;
|
|
vMBMasterRequestSetType( xFrameIsBroadcast );
|
|
eSndState = STATE_M_TX_XFWR;
|
|
/* If the frame is broadcast ,master will enable timer of convert delay,
|
|
* else master will enable timer of respond timeout. */
|
|
if ( xFrameIsBroadcast == TRUE )
|
|
{
|
|
vMBMasterPortTimersConvertDelayEnable( );
|
|
}
|
|
else
|
|
{
|
|
vMBMasterPortTimersRespondTimeoutEnable( );
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
return xNeedPoll;
|
|
}
|
|
|
|
BOOL MB_PORT_ISR_ATTR xMBMasterRTUTimerExpired(void)
|
|
{
|
|
BOOL xNeedPoll = FALSE;
|
|
|
|
switch (eRcvState)
|
|
{
|
|
/* Timer t35 expired. Startup phase is finished. */
|
|
case STATE_M_RX_INIT:
|
|
xNeedPoll = xMBMasterPortEventPost(EV_MASTER_READY);
|
|
break;
|
|
|
|
/* A frame was received and t35 expired. Notify the listener that
|
|
* a new frame was received. */
|
|
case STATE_M_RX_RCV:
|
|
xNeedPoll = xMBMasterPortEventPost(EV_MASTER_FRAME_RECEIVED);
|
|
break;
|
|
|
|
/* An error occured while receiving the frame. */
|
|
case STATE_M_RX_ERROR:
|
|
vMBMasterSetErrorType(EV_ERROR_RECEIVE_DATA);
|
|
xNeedPoll = xMBMasterPortEventPost(EV_MASTER_ERROR_PROCESS);
|
|
break;
|
|
|
|
/* Function called in an illegal state. */
|
|
default:
|
|
assert(eRcvState == STATE_M_RX_IDLE);
|
|
break;
|
|
}
|
|
eRcvState = STATE_M_RX_IDLE;
|
|
|
|
switch (eSndState)
|
|
{
|
|
/* A frame was send finish and convert delay or respond timeout expired.
|
|
* If the frame is broadcast,The master will idle,and if the frame is not
|
|
* broadcast. Notify the listener process error.*/
|
|
case STATE_M_TX_XFWR:
|
|
if ( xMBMasterRequestIsBroadcast( ) == FALSE ) {
|
|
vMBMasterSetErrorType(EV_ERROR_RESPOND_TIMEOUT);
|
|
xNeedPoll = xMBMasterPortEventPost(EV_MASTER_ERROR_PROCESS);
|
|
}
|
|
break;
|
|
/* Function called in an illegal state. */
|
|
default:
|
|
assert( ( eSndState == STATE_M_TX_XMIT ) || ( eSndState == STATE_M_TX_IDLE ));
|
|
break;
|
|
}
|
|
eSndState = STATE_M_TX_IDLE;
|
|
|
|
vMBMasterPortTimersDisable( );
|
|
/* If timer mode is convert delay, the master event then turns EV_MASTER_EXECUTE status. */
|
|
if (xMBMasterGetCurTimerMode() == MB_TMODE_CONVERT_DELAY) {
|
|
xNeedPoll = xMBMasterPortEventPost(EV_MASTER_EXECUTE);
|
|
}
|
|
|
|
return xNeedPoll;
|
|
}
|
|
|
|
|
|
#endif
|
|
|
|
|