Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... . Cleaned up header files from unnecessary headers (releated to soc/... headers).
557 lines
16 KiB
C
557 lines
16 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
/******************************************************************************
|
|
* Description: A stub to make the ESP32 debuggable by GDB over the serial
|
|
* port, at least enough to do a backtrace on panic. This gdbstub is read-only:
|
|
* it allows inspecting the ESP32 state
|
|
*******************************************************************************/
|
|
|
|
#include <string.h>
|
|
#include "esp32/rom/ets_sys.h"
|
|
#include "soc/uart_periph.h"
|
|
#include "soc/gpio_periph.h"
|
|
#include "esp_private/gdbstub.h"
|
|
#include "esp_debug_helpers.h"
|
|
#include "driver/gpio.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "sdkconfig.h"
|
|
|
|
//Length of buffer used to reserve GDB commands. Has to be at least able to fit the G command, which
|
|
//implies a minimum size of about 320 bytes.
|
|
#define PBUFLEN 512
|
|
|
|
static unsigned char cmd[PBUFLEN]; //GDB command input buffer
|
|
static char chsum; //Running checksum of the output packet
|
|
|
|
#define ATTR_GDBFN
|
|
|
|
//Receive a char from the uart. Uses polling and feeds the watchdog.
|
|
static int ATTR_GDBFN gdbRecvChar() {
|
|
int i;
|
|
while (((READ_PERI_REG(UART_STATUS_REG(0))>>UART_RXFIFO_CNT_S)&UART_RXFIFO_CNT)==0) ;
|
|
i=READ_PERI_REG(UART_FIFO_REG(0));
|
|
return i;
|
|
}
|
|
|
|
//Send a char to the uart.
|
|
static void ATTR_GDBFN gdbSendChar(char c) {
|
|
while (((READ_PERI_REG(UART_STATUS_REG(0))>>UART_TXFIFO_CNT_S)&UART_TXFIFO_CNT)>=126) ;
|
|
WRITE_PERI_REG(UART_FIFO_REG(0), c);
|
|
}
|
|
|
|
//Send the start of a packet; reset checksum calculation.
|
|
static void ATTR_GDBFN gdbPacketStart() {
|
|
chsum=0;
|
|
gdbSendChar('$');
|
|
}
|
|
|
|
//Send a char as part of a packet
|
|
static void ATTR_GDBFN gdbPacketChar(char c) {
|
|
if (c=='#' || c=='$' || c=='}' || c=='*') {
|
|
gdbSendChar('}');
|
|
gdbSendChar(c^0x20);
|
|
chsum+=(c^0x20)+'}';
|
|
} else {
|
|
gdbSendChar(c);
|
|
chsum+=c;
|
|
}
|
|
}
|
|
|
|
//Send a string as part of a packet
|
|
static void ATTR_GDBFN gdbPacketStr(const char *c) {
|
|
while (*c!=0) {
|
|
gdbPacketChar(*c);
|
|
c++;
|
|
}
|
|
}
|
|
|
|
//Send a hex val as part of a packet. 'bits'/4 dictates the number of hex chars sent.
|
|
static void ATTR_GDBFN gdbPacketHex(int val, int bits) {
|
|
char hexChars[]="0123456789abcdef";
|
|
int i;
|
|
for (i=bits; i>0; i-=4) {
|
|
gdbPacketChar(hexChars[(val>>(i-4))&0xf]);
|
|
}
|
|
}
|
|
|
|
//Finish sending a packet.
|
|
static void ATTR_GDBFN gdbPacketEnd() {
|
|
gdbSendChar('#');
|
|
gdbPacketHex(chsum, 8);
|
|
}
|
|
|
|
//Error states used by the routines that grab stuff from the incoming gdb packet
|
|
#define ST_ENDPACKET -1
|
|
#define ST_ERR -2
|
|
#define ST_OK -3
|
|
#define ST_CONT -4
|
|
|
|
//Grab a hex value from the gdb packet. Ptr will get positioned on the end
|
|
//of the hex string, as far as the routine has read into it. Bits/4 indicates
|
|
//the max amount of hex chars it gobbles up. Bits can be -1 to eat up as much
|
|
//hex chars as possible.
|
|
static long ATTR_GDBFN gdbGetHexVal(unsigned char **ptr, int bits) {
|
|
int i;
|
|
int no;
|
|
unsigned int v=0;
|
|
char c;
|
|
no=bits/4;
|
|
if (bits==-1) no=64;
|
|
for (i=0; i<no; i++) {
|
|
c=**ptr;
|
|
(*ptr)++;
|
|
if (c>='0' && c<='9') {
|
|
v<<=4;
|
|
v|=(c-'0');
|
|
} else if (c>='A' && c<='F') {
|
|
v<<=4;
|
|
v|=(c-'A')+10;
|
|
} else if (c>='a' && c<='f') {
|
|
v<<=4;
|
|
v|=(c-'a')+10;
|
|
} else if (c=='#') {
|
|
if (bits==-1) {
|
|
(*ptr)--;
|
|
return v;
|
|
}
|
|
return ST_ENDPACKET;
|
|
} else {
|
|
if (bits==-1) {
|
|
(*ptr)--;
|
|
return v;
|
|
}
|
|
return ST_ERR;
|
|
}
|
|
}
|
|
return v;
|
|
}
|
|
|
|
//Swap an int into the form gdb wants it
|
|
static int ATTR_GDBFN iswap(int i) {
|
|
int r;
|
|
r=((i>>24)&0xff);
|
|
r|=((i>>16)&0xff)<<8;
|
|
r|=((i>>8)&0xff)<<16;
|
|
r|=((i>>0)&0xff)<<24;
|
|
return r;
|
|
}
|
|
|
|
//Read a byte from ESP32 memory.
|
|
static unsigned char ATTR_GDBFN readbyte(unsigned int p) {
|
|
int *i=(int*)(p&(~3));
|
|
if (p<0x20000000 || p>=0x80000000) return -1;
|
|
return *i>>((p&3)*8);
|
|
}
|
|
|
|
|
|
//Register file in the format exp108 gdb port expects it.
|
|
//Inspired by gdb/regformats/reg-xtensa.dat
|
|
typedef struct {
|
|
uint32_t pc;
|
|
uint32_t a[64];
|
|
uint32_t lbeg;
|
|
uint32_t lend;
|
|
uint32_t lcount;
|
|
uint32_t sar;
|
|
uint32_t windowbase;
|
|
uint32_t windowstart;
|
|
uint32_t configid0;
|
|
uint32_t configid1;
|
|
uint32_t ps;
|
|
uint32_t threadptr;
|
|
uint32_t br;
|
|
uint32_t scompare1;
|
|
uint32_t acclo;
|
|
uint32_t acchi;
|
|
uint32_t m0;
|
|
uint32_t m1;
|
|
uint32_t m2;
|
|
uint32_t m3;
|
|
uint32_t expstate; //I'm going to assume this is exccause...
|
|
uint32_t f64r_lo;
|
|
uint32_t f64r_hi;
|
|
uint32_t f64s;
|
|
uint32_t f[16];
|
|
uint32_t fcr;
|
|
uint32_t fsr;
|
|
} GdbRegFile;
|
|
|
|
|
|
GdbRegFile gdbRegFile;
|
|
|
|
/*
|
|
//Register format as the Xtensa HAL has it:
|
|
STRUCT_FIELD (long, 4, XT_STK_EXIT, exit)
|
|
STRUCT_FIELD (long, 4, XT_STK_PC, pc)
|
|
STRUCT_FIELD (long, 4, XT_STK_PS, ps)
|
|
STRUCT_FIELD (long, 4, XT_STK_A0, a0)
|
|
[..]
|
|
STRUCT_FIELD (long, 4, XT_STK_A15, a15)
|
|
STRUCT_FIELD (long, 4, XT_STK_SAR, sar)
|
|
STRUCT_FIELD (long, 4, XT_STK_EXCCAUSE, exccause)
|
|
STRUCT_FIELD (long, 4, XT_STK_EXCVADDR, excvaddr)
|
|
STRUCT_FIELD (long, 4, XT_STK_LBEG, lbeg)
|
|
STRUCT_FIELD (long, 4, XT_STK_LEND, lend)
|
|
STRUCT_FIELD (long, 4, XT_STK_LCOUNT, lcount)
|
|
// Temporary space for saving stuff during window spill
|
|
STRUCT_FIELD (long, 4, XT_STK_TMP0, tmp0)
|
|
STRUCT_FIELD (long, 4, XT_STK_TMP1, tmp1)
|
|
STRUCT_FIELD (long, 4, XT_STK_TMP2, tmp2)
|
|
STRUCT_FIELD (long, 4, XT_STK_VPRI, vpri)
|
|
STRUCT_FIELD (long, 4, XT_STK_OVLY, ovly)
|
|
#endif
|
|
STRUCT_END(XtExcFrame)
|
|
*/
|
|
|
|
static void commonRegfile() {
|
|
if (gdbRegFile.a[0] & 0x8000000U) gdbRegFile.a[0] = (gdbRegFile.a[0] & 0x3fffffffU) | 0x40000000U;
|
|
if (!esp_stack_ptr_is_sane(gdbRegFile.a[1])) gdbRegFile.a[1] = 0xDEADBEEF;
|
|
gdbRegFile.windowbase=0; //0
|
|
gdbRegFile.windowstart=0x1; //1
|
|
gdbRegFile.configid0=0xdeadbeef; //ToDo
|
|
gdbRegFile.configid1=0xdeadbeef; //ToDo
|
|
gdbRegFile.threadptr=0xdeadbeef; //ToDo
|
|
gdbRegFile.br=0xdeadbeef; //ToDo
|
|
gdbRegFile.scompare1=0xdeadbeef; //ToDo
|
|
gdbRegFile.acclo=0xdeadbeef; //ToDo
|
|
gdbRegFile.acchi=0xdeadbeef; //ToDo
|
|
gdbRegFile.m0=0xdeadbeef; //ToDo
|
|
gdbRegFile.m1=0xdeadbeef; //ToDo
|
|
gdbRegFile.m2=0xdeadbeef; //ToDo
|
|
gdbRegFile.m3=0xdeadbeef; //ToDo
|
|
}
|
|
|
|
static void dumpHwToRegfile(XtExcFrame *frame) {
|
|
int i;
|
|
long *frameAregs=&frame->a0;
|
|
gdbRegFile.pc=(frame->pc & 0x3fffffffU)|0x40000000U;
|
|
for (i=0; i<16; i++) gdbRegFile.a[i]=frameAregs[i];
|
|
for (i=16; i<64; i++) gdbRegFile.a[i]=0xDEADBEEF;
|
|
gdbRegFile.lbeg=frame->lbeg;
|
|
gdbRegFile.lend=frame->lend;
|
|
gdbRegFile.lcount=frame->lcount;
|
|
gdbRegFile.ps=(frame->ps & PS_UM) ? (frame->ps & ~PS_EXCM) : frame->ps;
|
|
//All windows have been spilled to the stack by the ISR routines. The following values should indicate that.
|
|
gdbRegFile.sar=frame->sar;
|
|
commonRegfile();
|
|
gdbRegFile.expstate=frame->exccause; //ToDo
|
|
}
|
|
|
|
//Send the reason execution is stopped to GDB.
|
|
static void sendReason() {
|
|
//exception-to-signal mapping
|
|
char exceptionSignal[]={4,31,11,11,2,6,8,0,6,7,0,0,7,7,7,7};
|
|
int i=0;
|
|
gdbPacketStart();
|
|
gdbPacketChar('T');
|
|
i=gdbRegFile.expstate&0x7f;
|
|
if (i<sizeof(exceptionSignal)) {
|
|
gdbPacketHex(exceptionSignal[i], 8);
|
|
} else {
|
|
gdbPacketHex(11, 8);
|
|
}
|
|
gdbPacketEnd();
|
|
}
|
|
|
|
static int sendPacket(const char * text) {
|
|
gdbPacketStart();
|
|
if (text != NULL) gdbPacketStr(text);
|
|
gdbPacketEnd();
|
|
return ST_OK;
|
|
}
|
|
|
|
#if CONFIG_ESP_GDBSTUB_SUPPORT_TASKS
|
|
|
|
#define STUB_TASKS_NUM CONFIG_ESP_GDBSTUB_MAX_TASKS
|
|
|
|
//Remember the exception frame that caused panic since it's not saved in TCB
|
|
static XtExcFrame paniced_frame;
|
|
|
|
//Allows GDBStub to disable task support after a crash
|
|
//(e.g. if GDBStub crashes while trying to get task list, e.g. due to corrupted list structures)
|
|
static enum {
|
|
HANDLER_NOT_STARTED,
|
|
HANDLER_STARTED,
|
|
HANDLER_TASK_SUPPORT_DISABLED
|
|
} handlerState;
|
|
|
|
static void dumpTaskToRegfile(XtSolFrame *frame) {
|
|
int i;
|
|
long *frameAregs=&frame->a0;
|
|
gdbRegFile.pc=(frame->pc & 0x3fffffffU)|0x40000000U;
|
|
for (i=0; i<4; i++) gdbRegFile.a[i]=frameAregs[i];
|
|
for (i=4; i<64; i++) gdbRegFile.a[i]=0xDEADBEEF;
|
|
gdbRegFile.lbeg=0;
|
|
gdbRegFile.lend=0;
|
|
gdbRegFile.lcount=0;
|
|
gdbRegFile.ps=(frame->ps & PS_UM) ? (frame->ps & ~PS_EXCM) : frame->ps;
|
|
//All windows have been spilled to the stack by the ISR routines. The following values should indicate that.
|
|
gdbRegFile.sar=0;
|
|
commonRegfile();
|
|
gdbRegFile.expstate=0; //ToDo
|
|
}
|
|
|
|
// Fetch the task status. Returns the total number of tasks.
|
|
static unsigned getTaskInfo(unsigned index, unsigned * handle, const char ** name, unsigned * coreId) {
|
|
static unsigned taskCount = 0;
|
|
static TaskSnapshot_t tasks[STUB_TASKS_NUM];
|
|
|
|
if (!taskCount) {
|
|
unsigned tcbSize = 0;
|
|
taskCount = uxTaskGetSnapshotAll(tasks, STUB_TASKS_NUM, &tcbSize);
|
|
}
|
|
if (index < taskCount) {
|
|
TaskHandle_t h = (TaskHandle_t)tasks[index].pxTCB;
|
|
if (handle) *handle = (unsigned)h;
|
|
if (name) *name = pcTaskGetTaskName(h);
|
|
if (coreId) *coreId = xTaskGetAffinity(h);
|
|
}
|
|
return taskCount;
|
|
}
|
|
|
|
typedef struct
|
|
{
|
|
uint8_t * topOfStack;
|
|
} DumpTCB;
|
|
|
|
|
|
static void dumpTCBToRegFile(unsigned handle) {
|
|
// A task handle is a pointer to a TCB in FreeRTOS
|
|
DumpTCB * tcb = (DumpTCB*)handle;
|
|
uint8_t * pxTopOfStack = tcb->topOfStack;
|
|
|
|
//Deduced from coredump code
|
|
XtExcFrame * frame = (XtExcFrame*)pxTopOfStack;
|
|
if (frame->exit) {
|
|
// It's an exception frame
|
|
dumpHwToRegfile(frame);
|
|
} else {
|
|
XtSolFrame * taskFrame = (XtSolFrame*)pxTopOfStack;
|
|
dumpTaskToRegfile(taskFrame);
|
|
}
|
|
}
|
|
|
|
#define CUR_TASK_INDEX_NOT_SET -2
|
|
#define CUR_TASK_INDEX_UNKNOWN -1
|
|
|
|
// Get the index of the task currently running on the current CPU, and cache the result
|
|
static int findCurrentTaskIndex() {
|
|
static int curTaskIndex = CUR_TASK_INDEX_NOT_SET;
|
|
if (curTaskIndex == CUR_TASK_INDEX_NOT_SET) {
|
|
unsigned curHandle = (unsigned)xTaskGetCurrentTaskHandleForCPU(xPortGetCoreID());
|
|
unsigned handle;
|
|
unsigned count = getTaskInfo(0, 0, 0, 0);
|
|
for(int k=0; k<(int)count; k++) {
|
|
if (getTaskInfo(k, &handle, 0, 0) && curHandle == handle) {
|
|
curTaskIndex = k;
|
|
return curTaskIndex;
|
|
}
|
|
}
|
|
curTaskIndex = CUR_TASK_INDEX_UNKNOWN;
|
|
}
|
|
return curTaskIndex;
|
|
}
|
|
|
|
#endif // CONFIG_ESP_GDBSTUB_SUPPORT_TASKS
|
|
|
|
//Handle a command as received from GDB.
|
|
static int gdbHandleCommand(unsigned char *cmd, int len) {
|
|
//Handle a command
|
|
int i, j, k;
|
|
unsigned char *data=cmd+1;
|
|
if (cmd[0]=='g') { //send all registers to gdb
|
|
int *p=(int*)&gdbRegFile;
|
|
gdbPacketStart();
|
|
for (i=0; i<sizeof(GdbRegFile)/4; i++) gdbPacketHex(iswap(*p++), 32);
|
|
gdbPacketEnd();
|
|
} else if (cmd[0]=='G') { //receive content for all registers from gdb
|
|
int *p=(int*)&gdbRegFile;
|
|
for (i=0; i<sizeof(GdbRegFile)/4; i++) *p++=iswap(gdbGetHexVal(&data, 32));
|
|
sendPacket("OK");
|
|
} else if (cmd[0]=='m') { //read memory to gdb
|
|
i=gdbGetHexVal(&data, -1);
|
|
data++;
|
|
j=gdbGetHexVal(&data, -1);
|
|
gdbPacketStart();
|
|
for (k=0; k<j; k++) {
|
|
gdbPacketHex(readbyte(i++), 8);
|
|
}
|
|
gdbPacketEnd();
|
|
} else if (cmd[0]=='?') { //Reply with stop reason
|
|
sendReason();
|
|
#if CONFIG_ESP_GDBSTUB_SUPPORT_TASKS
|
|
} else if (handlerState != HANDLER_TASK_SUPPORT_DISABLED) {
|
|
if (cmd[0]=='H') { //Continue with task
|
|
if (cmd[1]=='g' || cmd[1]=='c') {
|
|
const char * ret = "OK";
|
|
data++;
|
|
i=gdbGetHexVal(&data, -1);
|
|
handlerState = HANDLER_STARTED; //Hg0 is the first packet received after connect
|
|
j = findCurrentTaskIndex();
|
|
if (i == j || (j == CUR_TASK_INDEX_UNKNOWN && i == 0)) {
|
|
//GDB has asked us for the current task on this CPU.
|
|
//This task either was executing when we have entered the panic handler,
|
|
//or was already switched out and we have paniced during the context switch.
|
|
//Either way we are interested in the stack frame where panic has happened,
|
|
//so obtain the state from the exception frame rather than the TCB.
|
|
dumpHwToRegfile(&paniced_frame);
|
|
} else {
|
|
unsigned handle, count;
|
|
//Get the handle for that task
|
|
count = getTaskInfo(i, &handle, 0, 0);
|
|
//Then extract TCB and gdbRegFile from it
|
|
if (i < count) dumpTCBToRegFile(handle);
|
|
else ret = "E00";
|
|
}
|
|
return sendPacket(ret);
|
|
}
|
|
return sendPacket(NULL);
|
|
} else if (cmd[0]=='T') { //Task alive check
|
|
unsigned count;
|
|
data++;
|
|
i=gdbGetHexVal(&data, -1);
|
|
count = getTaskInfo(i, 0, 0, 0);
|
|
return sendPacket(i < count ? "OK": "E00");
|
|
} else if (cmd[0]=='q') { //Extended query
|
|
// React to qThreadExtraInfo or qfThreadInfo or qsThreadInfo or qC, without using strcmp
|
|
if (len > 16 && cmd[1] == 'T' && cmd[2] == 'h' && cmd[3] == 'r' && cmd[7] == 'E' && cmd[12] == 'I' && cmd[16] == ',') {
|
|
data=&cmd[17];
|
|
i=gdbGetHexVal(&data, -1);
|
|
|
|
unsigned handle = 0, coreId = 3;
|
|
const char * name = 0;
|
|
// Extract the task name and CPU from freeRTOS
|
|
unsigned tCount = getTaskInfo(i, &handle, &name, &coreId);
|
|
if (i < tCount) {
|
|
gdbPacketStart();
|
|
for(k=0; name[k]; k++) gdbPacketHex(name[k], 8);
|
|
gdbPacketStr("20435055"); // CPU
|
|
gdbPacketStr(coreId == 0 ? "30": coreId == 1 ? "31" : "78"); // 0 or 1 or x
|
|
gdbPacketEnd();
|
|
return ST_OK;
|
|
}
|
|
} else if (len >= 12 && (cmd[1] == 'f' || cmd[1] == 's') && (cmd[2] == 'T' && cmd[3] == 'h' && cmd[4] == 'r' && cmd[5] == 'e' && cmd[6] == 'a' && cmd[7] == 'd' && cmd[8] == 'I')) {
|
|
// Only react to qfThreadInfo and qsThreadInfo, not using strcmp here since it can be in ROM
|
|
// Extract the number of task from freeRTOS
|
|
static int taskIndex = 0;
|
|
unsigned tCount = 0;
|
|
if (cmd[1] == 'f') {
|
|
taskIndex = 0;
|
|
handlerState = HANDLER_STARTED; //It seems it's the first request GDB is sending
|
|
}
|
|
tCount = getTaskInfo(0, 0, 0, 0);
|
|
if (taskIndex < tCount) {
|
|
gdbPacketStart();
|
|
gdbPacketStr("m");
|
|
gdbPacketHex(taskIndex, 32);
|
|
gdbPacketEnd();
|
|
taskIndex++;
|
|
} else return sendPacket("l");
|
|
} else if (len >= 2 && cmd[1] == 'C') {
|
|
// Get current task id
|
|
gdbPacketStart();
|
|
k = findCurrentTaskIndex();
|
|
if (k != CUR_TASK_INDEX_UNKNOWN) {
|
|
gdbPacketStr("QC");
|
|
gdbPacketHex(k, 32);
|
|
} else gdbPacketStr("bad");
|
|
gdbPacketEnd();
|
|
return ST_OK;
|
|
}
|
|
return sendPacket(NULL);
|
|
}
|
|
#endif // CONFIG_ESP_GDBSTUB_SUPPORT_TASKS
|
|
} else {
|
|
//We don't recognize or support whatever GDB just sent us.
|
|
return sendPacket(NULL);
|
|
}
|
|
return ST_OK;
|
|
}
|
|
|
|
|
|
//Lower layer: grab a command packet and check the checksum
|
|
//Calls gdbHandleCommand on the packet if the checksum is OK
|
|
//Returns ST_OK on success, ST_ERR when checksum fails, a
|
|
//character if it is received instead of the GDB packet
|
|
//start char.
|
|
static int gdbReadCommand() {
|
|
unsigned char c;
|
|
unsigned char chsum=0, rchsum;
|
|
unsigned char sentchs[2];
|
|
int p=0;
|
|
unsigned char *ptr;
|
|
c=gdbRecvChar();
|
|
if (c!='$') return c;
|
|
while(1) {
|
|
c=gdbRecvChar();
|
|
if (c=='#') { //end of packet, checksum follows
|
|
cmd[p]=0;
|
|
break;
|
|
}
|
|
chsum+=c;
|
|
if (c=='$') {
|
|
//Wut, restart packet?
|
|
chsum=0;
|
|
p=0;
|
|
continue;
|
|
}
|
|
if (c=='}') { //escape the next char
|
|
c=gdbRecvChar();
|
|
chsum+=c;
|
|
c^=0x20;
|
|
}
|
|
cmd[p++]=c;
|
|
if (p>=PBUFLEN) return ST_ERR;
|
|
}
|
|
//A # has been received. Get and check the received chsum.
|
|
sentchs[0]=gdbRecvChar();
|
|
sentchs[1]=gdbRecvChar();
|
|
ptr=&sentchs[0];
|
|
rchsum=gdbGetHexVal(&ptr, 8);
|
|
if (rchsum!=chsum) {
|
|
gdbSendChar('-');
|
|
return ST_ERR;
|
|
} else {
|
|
gdbSendChar('+');
|
|
return gdbHandleCommand(cmd, p);
|
|
}
|
|
}
|
|
|
|
|
|
void esp_gdbstub_panic_handler(XtExcFrame *frame) {
|
|
#if CONFIG_ESP_GDBSTUB_SUPPORT_TASKS
|
|
if (handlerState == HANDLER_STARTED) {
|
|
//We have re-entered GDB Stub. Try disabling task support.
|
|
handlerState = HANDLER_TASK_SUPPORT_DISABLED;
|
|
gdbPacketEnd(); // Ends up any pending GDB packet (this creates a garbage value)
|
|
} else if (handlerState == HANDLER_NOT_STARTED) {
|
|
//Need to remember the frame that panic'd since gdb will ask for all threads before ours
|
|
memcpy(&paniced_frame, frame, sizeof(paniced_frame));
|
|
dumpHwToRegfile(&paniced_frame);
|
|
}
|
|
#else // CONFIG_ESP_GDBSTUB_SUPPORT_TASKS
|
|
dumpHwToRegfile(frame);
|
|
#endif // CONFIG_ESP_GDBSTUB_SUPPORT_TASKS
|
|
|
|
//Make sure txd/rxd are enabled
|
|
gpio_pullup_dis(1);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0RXD_U, FUNC_U0RXD_U0RXD);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD_U0TXD);
|
|
|
|
sendReason();
|
|
while(gdbReadCommand()!=ST_CONT);
|
|
while(1);
|
|
}
|