OVMS3-idf/examples/bluetooth/esp_ble_mesh/ble_mesh_node
Hrishikesh Dhayagude fb32429387 ESP BLE Mesh: Minor fix - Print the address and the on/off value appropriately
The new value should be printed in the set function and not the previous
one.
2019-10-16 15:19:14 +08:00
..
main ESP BLE Mesh: Minor fix - Print the address and the on/off value appropriately 2019-10-16 15:19:14 +08:00
tutorial examples: change default build instructions in docs to CMake 2019-08-06 17:25:25 +05:30
CMakeLists.txt Bluetooth examples restructuring 2019-07-01 19:21:57 +08:00
Makefile Bluetooth examples restructuring 2019-07-01 19:21:57 +08:00
README.md examples: change default build instructions in docs to CMake 2019-08-06 17:25:25 +05:30
sdkconfig.defaults Handle deprecated values in sdkconfig.defaults 2019-10-03 10:13:42 +02:00

ESP BLE Mesh Node demo

This demo shows how BLE Mesh device can be set up as a node with the following features:

  • One element
  • Two SIG models
    • Configuration Server model: The role of this model is mainly to configure Provisioner devices AppKey and set up its relay function, TTL size, subscription, etc.
    • OnOff Server model: This model implements the most basic function of turning the lights on and off.

The default purpose of this demo is to enable the advertising function with 20-ms non-connectable interval in BLE 5.0. You can disable this function through menuconfig: idf.py menuconfig --> Example Configuration --> This option facilitates sending with 20ms non-connectable interval...

For a better demonstration effect, an RGB LED can be soldered onto the ESP32-DevKitC board, by connecting their corresponding GPIO pins are GPIO_NUM_25, GPIO_NUM_26, GPIO_NUM_27. Then you need to select the following option in menuconfig: idf.py menuconfig --> Example Configuration --> Board selection for BLE Mesh --> ESP-WROOM-32

Please check the tutorial for more information about this example.