History

zhiweijian 5dfbacd00e Component/bt: modify license		2018-01-15 19:47:23 +08:00
..
main	Component/bt: modify license	2018-01-15 19:47:23 +08:00
Makefile	component/bt: implement classic Bluetooth profiles A2DP(sink) and AVRCP(controller)	2017-04-12 16:42:14 +08:00
README.md	component/bt: implement A2DP source	2018-01-09 20:20:52 +08:00
sdkconfig.defaults	component/bt: implement A2DP source	2018-01-09 20:20:52 +08:00

README.md

ESP-IDF A2DP-SINK demo

Demo of A2DP audio sink role

This is the demo for user to use ESP_APIs to use Advanced Audio Distribution Profile in receiving audio stream

Options choose step: 1. make menuconfig. 2. enter menuconfig "Component config", choose "Bluetooth" 3. enter menu Bluetooth, choose "Bluedroid Enable" 4. enter menu Bluedroid Enable, choose "Classic Bluetooth" 5. select "A2DP" and choose "SINK"

For the I2S codec, pick whatever chip or board works for you; this code was written using a PCM5102 chip, but other I2S boards and chips will probably work as well. The default I2S connections are shown below, but these can be changed in menuconfig:

+-----------+--------------+ | ESP pin | I2S signal | +===========+==============+ | GPIO22 | LRCK | +-----------+--------------+ | GPIO25 | DATA | +-----------+--------------+ | GPIO26 | BCK | +-----------+--------------+

If the internal DAC is selected, analog audio will be available on GPIO25 and GPIO26. The output resolution on these pins will always be limited to 8 bit because of the internal structure of the DACs.

After the program started, other bluetooth devices such as smart phones can discover this device named "ESP_SPEAKER", and after connection is established, audio data can be transmitted and there will occur a count of audio data packets printed.