9463114e27
Fix A2DP stuck when BLE's interval is too small Fix assert due to no free element from Bugfix that bluetooth controller may not be able to enter sleep after end of wake up request Fix LMP sniff req timeout
1302 lines
38 KiB
Text
1302 lines
38 KiB
Text
menu Bluetooth
|
|
|
|
|
|
config BT_ENABLED
|
|
bool "Bluetooth"
|
|
help
|
|
Select this option to enable Bluetooth and show the submenu with Bluetooth configuration choices.
|
|
|
|
menu "Bluetooth controller"
|
|
visible if BT_ENABLED
|
|
|
|
choice BTDM_CONTROLLER_MODE
|
|
prompt "Bluetooth controller mode (BR/EDR/BLE/DUALMODE)"
|
|
depends on BT_ENABLED
|
|
help
|
|
Specify the bluetooth controller mode (BR/EDR, BLE or dual mode).
|
|
|
|
config BTDM_CONTROLLER_MODE_BLE_ONLY
|
|
bool "BLE Only"
|
|
|
|
config BTDM_CONTROLLER_MODE_BR_EDR_ONLY
|
|
bool "BR/EDR Only"
|
|
|
|
config BTDM_CONTROLLER_MODE_BTDM
|
|
bool "Bluetooth Dual Mode"
|
|
|
|
endchoice
|
|
|
|
config BTDM_CONTROLLER_BLE_MAX_CONN
|
|
int "BLE Max Connections"
|
|
depends on BTDM_CONTROLLER_MODE_BLE_ONLY || BTDM_CONTROLLER_MODE_BTDM
|
|
default 3
|
|
range 1 9
|
|
help
|
|
BLE maximum connections of bluetooth controller.
|
|
Each connection uses 1KB static DRAM whenever the BT controller is enabled.
|
|
|
|
config BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN
|
|
int "BR/EDR ACL Max Connections"
|
|
depends on BTDM_CONTROLLER_MODE_BR_EDR_ONLY || BTDM_CONTROLLER_MODE_BTDM
|
|
default 2
|
|
range 1 7
|
|
help
|
|
BR/EDR ACL maximum connections of bluetooth controller.
|
|
Each connection uses 1.2KB static DRAM whenever the BT controller is enabled.
|
|
|
|
config BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN
|
|
int "BR/EDR Sync(SCO/eSCO) Max Connections"
|
|
depends on BTDM_CONTROLLER_MODE_BR_EDR_ONLY || BTDM_CONTROLLER_MODE_BTDM
|
|
default 0
|
|
range 0 3
|
|
help
|
|
BR/EDR Synchronize maximum connections of bluetooth controller.
|
|
Each connection uses 2KB static DRAM whenever the BT controller is enabled.
|
|
|
|
choice BTDM_CONTROLLER_BR_EDR_SCO_DATA_PATH
|
|
prompt "BR/EDR Sync(SCO/eSCO) default data path"
|
|
depends on BTDM_CONTROLLER_MODE_BR_EDR_ONLY || BTDM_CONTROLLER_MODE_BTDM
|
|
default BTDM_CONTROLLER_BR_EDR_SCO_DATA_PATH_PCM
|
|
help
|
|
SCO data path, i.e. HCI or PCM.
|
|
SCO data can be sent/received through HCI synchronous packets, or the data
|
|
can be routed to on-chip PCM module on ESP32. PCM input/output signals can
|
|
be "matrixed" to GPIOs. The default data path can also be set using API
|
|
"esp_bredr_sco_datapath_set"
|
|
|
|
config BTDM_CONTROLLER_BR_EDR_SCO_DATA_PATH_HCI
|
|
bool "HCI"
|
|
config BTDM_CONTROLLER_BR_EDR_SCO_DATA_PATH_PCM
|
|
bool "PCM"
|
|
endchoice
|
|
|
|
config BTDM_CONTROLLER_BR_EDR_SCO_DATA_PATH_EFF
|
|
int
|
|
default 0 if BTDM_CONTROLLER_BR_EDR_SCO_DATA_PATH_HCI
|
|
default 1 if BTDM_CONTROLLER_BR_EDR_SCO_DATA_PATH_PCM
|
|
default 0
|
|
|
|
config BTDM_CONTROLLER_AUTO_LATENCY
|
|
bool "Auto latency"
|
|
depends on BTDM_CONTROLLER_MODE_BTDM
|
|
default n
|
|
help
|
|
BLE auto latency, used to enhance classic BT performance
|
|
while classic BT and BLE are enabled at the same time.
|
|
|
|
config BTDM_CONTROLLER_AUTO_LATENCY_EFF
|
|
bool
|
|
default BTDM_CONTROLLER_AUTO_LATENCY if BTDM_CONTROLLER_MODE_BTDM
|
|
default n
|
|
|
|
config BTDM_CONTROLLER_BLE_MAX_CONN_EFF
|
|
int
|
|
default BTDM_CONTROLLER_BLE_MAX_CONN if BTDM_CONTROLLER_MODE_BLE_ONLY || BTDM_CONTROLLER_MODE_BTDM
|
|
default 0
|
|
|
|
config BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF
|
|
int
|
|
default BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN if BTDM_CONTROLLER_MODE_BR_EDR_ONLY || BTDM_CONTROLLER_MODE_BTDM
|
|
default 0
|
|
|
|
config BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF
|
|
int
|
|
default BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN if BTDM_CONTROLLER_MODE_BR_EDR_ONLY || BTDM_CONTROLLER_MODE_BTDM
|
|
default 0
|
|
|
|
choice BTDM_CONTROLLER_PINNED_TO_CORE_CHOICE
|
|
prompt "The cpu core which bluetooth controller run"
|
|
depends on BT_ENABLED && !FREERTOS_UNICORE
|
|
help
|
|
Specify the cpu core to run bluetooth controller.
|
|
Can not specify no-affinity.
|
|
|
|
config BTDM_CONTROLLER_PINNED_TO_CORE_0
|
|
bool "Core 0 (PRO CPU)"
|
|
config BTDM_CONTROLLER_PINNED_TO_CORE_1
|
|
bool "Core 1 (APP CPU)"
|
|
depends on !FREERTOS_UNICORE
|
|
endchoice
|
|
|
|
config BTDM_CONTROLLER_PINNED_TO_CORE
|
|
int
|
|
default 0 if BTDM_CONTROLLER_PINNED_TO_CORE_0
|
|
default 1 if BTDM_CONTROLLER_PINNED_TO_CORE_1
|
|
default 0
|
|
|
|
choice BTDM_CONTROLLER_HCI_MODE_CHOICE
|
|
prompt "HCI mode"
|
|
depends on BT_ENABLED
|
|
help
|
|
Speicify HCI mode as VHCI or UART(H4)
|
|
|
|
config BTDM_CONTROLLER_HCI_MODE_VHCI
|
|
bool "VHCI"
|
|
help
|
|
Normal option. Mostly, choose this VHCI when bluetooth host run on ESP32, too.
|
|
|
|
config BTDM_CONTROLLER_HCI_MODE_UART_H4
|
|
bool "UART(H4)"
|
|
help
|
|
If use external bluetooth host which run on other hardware and use UART as the HCI interface,
|
|
choose this option.
|
|
endchoice
|
|
|
|
menu "HCI UART(H4) Options"
|
|
visible if BTDM_CONTROLLER_HCI_MODE_UART_H4
|
|
|
|
config BT_HCI_UART_NO
|
|
int "UART Number for HCI"
|
|
depends on BTDM_CONTROLLER_HCI_MODE_UART_H4
|
|
range 1 2
|
|
default 1
|
|
help
|
|
Uart number for HCI. The available uart is UART1 and UART2.
|
|
|
|
config BT_HCI_UART_BAUDRATE
|
|
int "UART Baudrate for HCI"
|
|
depends on BTDM_CONTROLLER_HCI_MODE_UART_H4
|
|
range 115200 921600
|
|
default 921600
|
|
help
|
|
UART Baudrate for HCI. Please use standard baudrate.
|
|
endmenu
|
|
|
|
menu "MODEM SLEEP Options"
|
|
visible if BT_ENABLED
|
|
|
|
config BTDM_CONTROLLER_MODEM_SLEEP
|
|
bool "Bluetooth modem sleep"
|
|
depends on BT_ENABLED
|
|
default y
|
|
help
|
|
Enable/disable bluetooth controller low power mode.
|
|
|
|
choice BTDM_MODEM_SLEEP_MODE
|
|
prompt "Bluetooth Modem sleep mode"
|
|
depends on BTDM_CONTROLLER_MODEM_SLEEP
|
|
help
|
|
To select which strategy to use for modem sleep
|
|
|
|
config BTDM_MODEM_SLEEP_MODE_ORIG
|
|
bool "ORIG Mode(sleep with low power clock)"
|
|
help
|
|
ORIG mode is a bluetooth sleep mode that can be used for dual mode controller. In this mode, bluetooth controller
|
|
sleeps between BR/EDR frames and BLE events. A low power clock is used to maintain bluetooth reference clock.
|
|
config BTDM_MODEM_SLEEP_MODE_EVED
|
|
bool "EVED Mode(For internal test only)"
|
|
help
|
|
EVED mode is for BLE only and is only for internal test. Do not use it for production. this mode is not compatible
|
|
with DFS nor light sleep
|
|
endchoice
|
|
|
|
choice BTDM_LOW_POWER_CLOCK
|
|
prompt "Bluetooth low power clock"
|
|
depends on BTDM_MODEM_SLEEP_MODE_ORIG
|
|
help
|
|
Select the low power clock source for bluetooth controller
|
|
|
|
config BTDM_LPCLK_SEL_MAIN_XTAL
|
|
bool "Main crystal"
|
|
help
|
|
Main crystal can be used as low power clock for bluetooth modem sleep. If this option is selected, bluetooth
|
|
modem sleep can work under Dynamic Frequency Scaling(DFS) enabled, but cannot work when light sleep is enabled.
|
|
Main crystal has a relatively better performance than other bluetooth low power clock sources.
|
|
config BTDM_LPCLK_SEL_EXT_32K_XTAL
|
|
bool "External 32kHz crystal"
|
|
depends on ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL
|
|
endchoice
|
|
endmenu
|
|
|
|
config BLE_SCAN_DUPLICATE
|
|
bool "BLE Scan Duplicate Options"
|
|
depends on (BTDM_CONTROLLER_MODE_BTDM || BTDM_CONTROLLER_MODE_BLE_ONLY)
|
|
default y
|
|
help
|
|
This select enables parameters setting of BLE scan duplicate.
|
|
|
|
choice SCAN_DUPLICATE_TYPE
|
|
prompt "Scan Duplicate Type"
|
|
default SCAN_DUPLICATE_BY_DEVICE_ADDR
|
|
depends on BLE_SCAN_DUPLICATE
|
|
help
|
|
Scan duplicate have three ways. one is "Scan Duplicate By Device Address", This way is to use advertiser address
|
|
filtering. The adv packet of the same address is only allowed to be reported once. Another way is "Scan Duplicate
|
|
By Device Address And Advertising Data". This way is to use advertising data and device address filtering. All
|
|
different adv packets with the same address are allowed to be reported. The last way is "Scan Duplicate By Advertising
|
|
Data". This way is to use advertising data filtering. All same advertising data only allow to be reported once even though
|
|
they are from different devices.
|
|
|
|
config SCAN_DUPLICATE_BY_DEVICE_ADDR
|
|
bool "Scan Duplicate By Device Address"
|
|
help
|
|
This way is to use advertiser address filtering. The adv packet of the same address is only allowed to be reported once
|
|
|
|
config SCAN_DUPLICATE_BY_ADV_DATA
|
|
bool "Scan Duplicate By Advertising Data"
|
|
help
|
|
This way is to use advertising data filtering. All same advertising data only allow to be reported once even though
|
|
they are from different devices.
|
|
|
|
config SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR
|
|
bool "Scan Duplicate By Device Address And Advertising Data"
|
|
help
|
|
This way is to use advertising data and device address filtering. All different adv packets with the same address are
|
|
allowed to be reported.
|
|
endchoice
|
|
|
|
config SCAN_DUPLICATE_TYPE
|
|
int
|
|
depends on BLE_SCAN_DUPLICATE
|
|
default 0 if SCAN_DUPLICATE_BY_DEVICE_ADDR
|
|
default 1 if SCAN_DUPLICATE_BY_ADV_DATA
|
|
default 2 if SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR
|
|
default 0
|
|
|
|
config DUPLICATE_SCAN_CACHE_SIZE
|
|
int "Maximum number of devices in scan duplicate filter"
|
|
depends on BLE_SCAN_DUPLICATE
|
|
range 10 1000
|
|
default 200
|
|
help
|
|
Maximum number of devices which can be recorded in scan duplicate filter.
|
|
When the maximum amount of device in the filter is reached, the cache will be refreshed.
|
|
|
|
config BLE_MESH_SCAN_DUPLICATE_EN
|
|
bool "Special duplicate scan mechanism for BLE Mesh scan"
|
|
depends on BLE_SCAN_DUPLICATE
|
|
default n
|
|
help
|
|
This enables the BLE scan duplicate for special BLE Mesh scan.
|
|
|
|
config MESH_DUPLICATE_SCAN_CACHE_SIZE
|
|
int "Maximum number of Mesh adv packets in scan duplicate filter"
|
|
depends on BLE_MESH_SCAN_DUPLICATE_EN
|
|
range 10 1000
|
|
default 200
|
|
help
|
|
Maximum number of adv packets which can be recorded in duplicate scan cache for BLE Mesh.
|
|
When the maximum amount of device in the filter is reached, the cache will be refreshed.
|
|
|
|
config BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED
|
|
bool "BLE adv report flow control supported"
|
|
depends on (BTDM_CONTROLLER_MODE_BTDM || BTDM_CONTROLLER_MODE_BLE_ONLY)
|
|
default y
|
|
help
|
|
The function is mainly used to enable flow control for advertising reports. When it is enabled,
|
|
advertising reports will be discarded by the controller if the number of unprocessed advertising
|
|
reports exceeds the size of BLE adv report flow control.
|
|
|
|
config BLE_ADV_REPORT_FLOW_CONTROL_NUM
|
|
int "BLE adv report flow control number"
|
|
depends on BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED
|
|
range 50 1000
|
|
default 100
|
|
help
|
|
The number of unprocessed advertising report that Bluedroid can save.If you set
|
|
`BLE_ADV_REPORT_FLOW_CONTROL_NUM` to a small value, this may cause adv packets lost.
|
|
If you set `BLE_ADV_REPORT_FLOW_CONTROL_NUM` to a large value, Bluedroid may cache a
|
|
lot of adv packets and this may cause system memory run out. For example, if you set
|
|
it to 50, the maximum memory consumed by host is 35 * 50 bytes. Please set
|
|
`BLE_ADV_REPORT_FLOW_CONTROL_NUM` according to your system free memory and handle adv
|
|
packets as fast as possible, otherwise it will cause adv packets lost.
|
|
|
|
config BLE_ADV_REPORT_DISCARD_THRSHOLD
|
|
int "BLE adv lost event threshold value"
|
|
depends on BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED
|
|
range 1 1000
|
|
default 20
|
|
help
|
|
When adv report flow control is enabled, The ADV lost event will be generated when the number
|
|
of ADV packets lost in the controller reaches this threshold. It is better to set a larger value.
|
|
If you set `BLE_ADV_REPORT_DISCARD_THRSHOLD` to a small value or printf every adv lost event, it
|
|
may cause adv packets lost more.
|
|
|
|
menuconfig BTDM_COEX_BT_OPTIONS
|
|
bool "Coexistence Bluetooth Side Options"
|
|
depends on SW_COEXIST_ENABLE
|
|
default n
|
|
help
|
|
Options of Bluetooth Side of WiFi and bluetooth coexistence.
|
|
|
|
config BTDM_COEX_BLE_ADV_HIGH_PRIORITY
|
|
bool "Improve BLE ADV priority for WiFi & BLE coexistence"
|
|
depends on BTDM_COEX_BT_OPTIONS
|
|
default n
|
|
help
|
|
Improve BLE ADV coexistence priority to make it better performance.
|
|
For example, BLE mesh need to enable this option to improve BLE adv performance.
|
|
|
|
endmenu
|
|
|
|
menuconfig BLUEDROID_ENABLED
|
|
bool "Bluedroid Enable"
|
|
depends on BTDM_CONTROLLER_HCI_MODE_VHCI
|
|
default y
|
|
help
|
|
This enables the default Bluedroid Bluetooth stack
|
|
|
|
choice BLUEDROID_PINNED_TO_CORE_CHOICE
|
|
prompt "The cpu core which Bluedroid run"
|
|
depends on BLUEDROID_ENABLED && !FREERTOS_UNICORE
|
|
help
|
|
Which the cpu core to run Bluedroid. Can choose core0 and core1.
|
|
Can not specify no-affinity.
|
|
|
|
config BLUEDROID_PINNED_TO_CORE_0
|
|
bool "Core 0 (PRO CPU)"
|
|
config BLUEDROID_PINNED_TO_CORE_1
|
|
bool "Core 1 (APP CPU)"
|
|
depends on !FREERTOS_UNICORE
|
|
endchoice
|
|
|
|
config BLUEDROID_PINNED_TO_CORE
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if BLUEDROID_PINNED_TO_CORE_0
|
|
default 1 if BLUEDROID_PINNED_TO_CORE_1
|
|
default 0
|
|
|
|
config BTC_TASK_STACK_SIZE
|
|
int "Bluetooth event (callback to application) task stack size"
|
|
depends on BLUEDROID_ENABLED
|
|
default 3072
|
|
help
|
|
This select btc task stack size
|
|
|
|
config BLUEDROID_MEM_DEBUG
|
|
bool "Bluedroid memory debug"
|
|
depends on BLUEDROID_ENABLED
|
|
default n
|
|
help
|
|
Bluedroid memory debug
|
|
|
|
config CLASSIC_BT_ENABLED
|
|
bool "Classic Bluetooth"
|
|
depends on BLUEDROID_ENABLED
|
|
default n
|
|
help
|
|
For now this option needs "SMP_ENABLE" to be set to yes
|
|
|
|
config A2DP_ENABLE
|
|
bool "A2DP"
|
|
depends on CLASSIC_BT_ENABLED
|
|
default n
|
|
help
|
|
Advanced Audio Distrubution Profile
|
|
|
|
config A2DP_SINK_TASK_STACK_SIZE
|
|
int "A2DP sink (audio stream decoding) task stack size"
|
|
depends on A2DP_ENABLE
|
|
default 2048
|
|
|
|
config A2DP_SOURCE_TASK_STACK_SIZE
|
|
int "A2DP source (audio stream encoding) task stack size"
|
|
depends on A2DP_ENABLE
|
|
default 2048
|
|
|
|
config BT_SPP_ENABLED
|
|
bool "SPP"
|
|
depends on CLASSIC_BT_ENABLED
|
|
default n
|
|
help
|
|
This enables the Serial Port Profile
|
|
|
|
config HFP_ENABLE
|
|
bool "Hands Free/Handset Profile"
|
|
depends on CLASSIC_BT_ENABLED
|
|
default n
|
|
|
|
choice HFP_ROLE
|
|
prompt "Hands-free Profile Role configuration"
|
|
depends on HFP_ENABLE
|
|
|
|
config HFP_CLIENT_ENABLE
|
|
bool "Hands Free Unit"
|
|
endchoice
|
|
|
|
choice HFP_AUDIO_DATA_PATH
|
|
prompt "audio(SCO) data path"
|
|
depends on HFP_ENABLE
|
|
help
|
|
SCO data path, i.e. HCI or PCM. This option is set using API
|
|
"esp_bredr_sco_datapath_set" in Bluetooth host. Default SCO data
|
|
path can also be set in Bluetooth Controller.
|
|
|
|
config HFP_AUDIO_DATA_PATH_PCM
|
|
bool "PCM"
|
|
config HFP_AUDIO_DATA_PATH_HCI
|
|
bool "HCI"
|
|
endchoice
|
|
|
|
config GATTS_ENABLE
|
|
bool "Include GATT server module(GATTS)"
|
|
depends on BLUEDROID_ENABLED && (BTDM_CONTROLLER_MODE_BTDM || BTDM_CONTROLLER_MODE_BLE_ONLY)
|
|
default y
|
|
help
|
|
This option can be disabled when the app work only on gatt client mode
|
|
|
|
choice GATTS_SEND_SERVICE_CHANGE_MODE
|
|
prompt "GATTS Service Change Mode"
|
|
default GATTS_SEND_SERVICE_CHANGE_AUTO
|
|
depends on GATTS_ENABLE
|
|
help
|
|
Service change indication mode for GATT Server.
|
|
|
|
config GATTS_SEND_SERVICE_CHANGE_MANUAL
|
|
bool "GATTS manually send service change indication"
|
|
help
|
|
Manually send service change indication through API esp_ble_gatts_send_service_change_indication()
|
|
|
|
config GATTS_SEND_SERVICE_CHANGE_AUTO
|
|
bool "GATTS automatically send service change indication"
|
|
help
|
|
Let Bluedroid handle the service change indication internally
|
|
|
|
endchoice
|
|
|
|
config GATTS_SEND_SERVICE_CHANGE_MODE
|
|
int
|
|
depends on GATTS_ENABLE
|
|
default 0 if GATTS_SEND_SERVICE_CHANGE_AUTO
|
|
default 1 if GATTS_SEND_SERVICE_CHANGE_MANUAL
|
|
default 0
|
|
|
|
config GATTC_ENABLE
|
|
bool "Include GATT client module(GATTC)"
|
|
depends on BLUEDROID_ENABLED && (BTDM_CONTROLLER_MODE_BTDM || BTDM_CONTROLLER_MODE_BLE_ONLY)
|
|
default y
|
|
help
|
|
This option can be close when the app work only on gatt server mode
|
|
|
|
config GATTC_CACHE_NVS_FLASH
|
|
bool "Save gattc cache data to nvs flash"
|
|
depends on GATTC_ENABLE && (BTDM_CONTROLLER_MODE_BTDM || BTDM_CONTROLLER_MODE_BLE_ONLY)
|
|
default n
|
|
help
|
|
This select can save gattc cache data to nvs flash
|
|
|
|
config BLE_SMP_ENABLE
|
|
bool "Include BLE security module(SMP)"
|
|
depends on BLUEDROID_ENABLED && (BTDM_CONTROLLER_MODE_BTDM || BTDM_CONTROLLER_MODE_BLE_ONLY)
|
|
default y
|
|
help
|
|
This option can be close when the app not used the ble security connect.
|
|
|
|
config SMP_SLAVE_CON_PARAMS_UPD_ENABLE
|
|
bool "Slave enable connection parameters update during pairing"
|
|
depends on BLE_SMP_ENABLE
|
|
default n
|
|
help
|
|
In order to reduce the pairing time, slave actively initiates connection parameters update during pairing.
|
|
|
|
config BT_STACK_NO_LOG
|
|
bool "Disable BT debug logs (minimize bin size)"
|
|
depends on BLUEDROID_ENABLED
|
|
default n
|
|
help
|
|
This select can save the rodata code size
|
|
|
|
menu "BT DEBUG LOG LEVEL"
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
|
|
choice HCI_INITIAL_TRACE_LEVEL
|
|
prompt "HCI layer"
|
|
default HCI_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for HCI layer
|
|
|
|
config HCI_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config HCI_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config HCI_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config HCI_TRACE_LEVEL_API
|
|
bool "API"
|
|
config HCI_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config HCI_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config HCI_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config HCI_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if HCI_TRACE_LEVEL_NONE
|
|
default 1 if HCI_TRACE_LEVEL_ERROR
|
|
default 2 if HCI_TRACE_LEVEL_WARNING
|
|
default 3 if HCI_TRACE_LEVEL_API
|
|
default 4 if HCI_TRACE_LEVEL_EVENT
|
|
default 5 if HCI_TRACE_LEVEL_DEBUG
|
|
default 6 if HCI_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice BTM_INITIAL_TRACE_LEVEL
|
|
prompt "BTM layer"
|
|
default BTM_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for BTM layer
|
|
|
|
config BTM_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config BTM_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config BTM_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config BTM_TRACE_LEVEL_API
|
|
bool "API"
|
|
config BTM_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config BTM_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config BTM_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config BTM_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if BTM_TRACE_LEVEL_NONE
|
|
default 1 if BTM_TRACE_LEVEL_ERROR
|
|
default 2 if BTM_TRACE_LEVEL_WARNING
|
|
default 3 if BTM_TRACE_LEVEL_API
|
|
default 4 if BTM_TRACE_LEVEL_EVENT
|
|
default 5 if BTM_TRACE_LEVEL_DEBUG
|
|
default 6 if BTM_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice L2CAP_INITIAL_TRACE_LEVEL
|
|
prompt "L2CAP layer"
|
|
default L2CAP_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for L2CAP layer
|
|
|
|
config L2CAP_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config L2CAP_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config L2CAP_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config L2CAP_TRACE_LEVEL_API
|
|
bool "API"
|
|
config L2CAP_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config L2CAP_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config L2CAP_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config L2CAP_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if L2CAP_TRACE_LEVEL_NONE
|
|
default 1 if L2CAP_TRACE_LEVEL_ERROR
|
|
default 2 if L2CAP_TRACE_LEVEL_WARNING
|
|
default 3 if L2CAP_TRACE_LEVEL_API
|
|
default 4 if L2CAP_TRACE_LEVEL_EVENT
|
|
default 5 if L2CAP_TRACE_LEVEL_DEBUG
|
|
default 6 if L2CAP_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice RFCOMM_INITIAL_TRACE_LEVEL
|
|
prompt "RFCOMM layer"
|
|
default RFCOMM_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for RFCOMM layer
|
|
|
|
config RFCOMM_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config RFCOMM_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config RFCOMM_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config RFCOMM_TRACE_LEVEL_API
|
|
bool "API"
|
|
config RFCOMM_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config RFCOMM_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config RFCOMM_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config RFCOMM_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if RFCOMM_TRACE_LEVEL_NONE
|
|
default 1 if RFCOMM_TRACE_LEVEL_ERROR
|
|
default 2 if RFCOMM_TRACE_LEVEL_WARNING
|
|
default 3 if RFCOMM_TRACE_LEVEL_API
|
|
default 4 if RFCOMM_TRACE_LEVEL_EVENT
|
|
default 5 if RFCOMM_TRACE_LEVEL_DEBUG
|
|
default 6 if RFCOMM_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice SDP_INITIAL_TRACE_LEVEL
|
|
prompt "SDP layer"
|
|
default SDP_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for SDP layer
|
|
|
|
config SDP_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config SDP_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config SDP_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config SDP_TRACE_LEVEL_API
|
|
bool "API"
|
|
config SDP_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config SDP_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config SDP_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config SDP_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if SDP_TRACE_LEVEL_NONE
|
|
default 1 if SDP_TRACE_LEVEL_ERROR
|
|
default 2 if SDP_TRACE_LEVEL_WARNING
|
|
default 3 if SDP_TRACE_LEVEL_API
|
|
default 4 if SDP_TRACE_LEVEL_EVENT
|
|
default 5 if SDP_TRACE_LEVEL_DEBUG
|
|
default 6 if SDP_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice GAP_INITIAL_TRACE_LEVEL
|
|
prompt "GAP layer"
|
|
default GAP_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for GAP layer
|
|
|
|
config GAP_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config GAP_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config GAP_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config GAP_TRACE_LEVEL_API
|
|
bool "API"
|
|
config GAP_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config GAP_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config GAP_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config GAP_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if GAP_TRACE_LEVEL_NONE
|
|
default 1 if GAP_TRACE_LEVEL_ERROR
|
|
default 2 if GAP_TRACE_LEVEL_WARNING
|
|
default 3 if GAP_TRACE_LEVEL_API
|
|
default 4 if GAP_TRACE_LEVEL_EVENT
|
|
default 5 if GAP_TRACE_LEVEL_DEBUG
|
|
default 6 if GAP_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice BNEP_INITIAL_TRACE_LEVEL
|
|
prompt "BNEP layer"
|
|
default BNEP_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for BNEP layer
|
|
|
|
config BNEP_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config BNEP_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config BNEP_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config BNEP_TRACE_LEVEL_API
|
|
bool "API"
|
|
config BNEP_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config BNEP_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config BNEP_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config BNEP_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if BNEP_TRACE_LEVEL_NONE
|
|
default 1 if BNEP_TRACE_LEVEL_ERROR
|
|
default 2 if BNEP_TRACE_LEVEL_WARNING
|
|
default 3 if BNEP_TRACE_LEVEL_API
|
|
default 4 if BNEP_TRACE_LEVEL_EVENT
|
|
default 5 if BNEP_TRACE_LEVEL_DEBUG
|
|
default 6 if BNEP_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice PAN_INITIAL_TRACE_LEVEL
|
|
prompt "PAN layer"
|
|
default PAN_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for PAN layer
|
|
|
|
config PAN_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config PAN_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config PAN_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config PAN_TRACE_LEVEL_API
|
|
bool "API"
|
|
config PAN_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config PAN_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config PAN_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config PAN_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if PAN_TRACE_LEVEL_NONE
|
|
default 1 if PAN_TRACE_LEVEL_ERROR
|
|
default 2 if PAN_TRACE_LEVEL_WARNING
|
|
default 3 if PAN_TRACE_LEVEL_API
|
|
default 4 if PAN_TRACE_LEVEL_EVENT
|
|
default 5 if PAN_TRACE_LEVEL_DEBUG
|
|
default 6 if PAN_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice A2D_INITIAL_TRACE_LEVEL
|
|
prompt "A2D layer"
|
|
default A2D_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for A2D layer
|
|
|
|
config A2D_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config A2D_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config A2D_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config A2D_TRACE_LEVEL_API
|
|
bool "API"
|
|
config A2D_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config A2D_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config A2D_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config A2D_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if A2D_TRACE_LEVEL_NONE
|
|
default 1 if A2D_TRACE_LEVEL_ERROR
|
|
default 2 if A2D_TRACE_LEVEL_WARNING
|
|
default 3 if A2D_TRACE_LEVEL_API
|
|
default 4 if A2D_TRACE_LEVEL_EVENT
|
|
default 5 if A2D_TRACE_LEVEL_DEBUG
|
|
default 6 if A2D_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice AVDT_INITIAL_TRACE_LEVEL
|
|
prompt "AVDT layer"
|
|
default AVDT_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for AVDT layer
|
|
|
|
config AVDT_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config AVDT_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config AVDT_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config AVDT_TRACE_LEVEL_API
|
|
bool "API"
|
|
config AVDT_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config AVDT_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config AVDT_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config AVDT_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if AVDT_TRACE_LEVEL_NONE
|
|
default 1 if AVDT_TRACE_LEVEL_ERROR
|
|
default 2 if AVDT_TRACE_LEVEL_WARNING
|
|
default 3 if AVDT_TRACE_LEVEL_API
|
|
default 4 if AVDT_TRACE_LEVEL_EVENT
|
|
default 5 if AVDT_TRACE_LEVEL_DEBUG
|
|
default 6 if AVDT_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice AVCT_INITIAL_TRACE_LEVEL
|
|
prompt "AVCT layer"
|
|
default AVCT_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for AVCT layer
|
|
|
|
config AVCT_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config AVCT_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config AVCT_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config AVCT_TRACE_LEVEL_API
|
|
bool "API"
|
|
config AVCT_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config AVCT_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config AVCT_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config AVCT_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if AVCT_TRACE_LEVEL_NONE
|
|
default 1 if AVCT_TRACE_LEVEL_ERROR
|
|
default 2 if AVCT_TRACE_LEVEL_WARNING
|
|
default 3 if AVCT_TRACE_LEVEL_API
|
|
default 4 if AVCT_TRACE_LEVEL_EVENT
|
|
default 5 if AVCT_TRACE_LEVEL_DEBUG
|
|
default 6 if AVCT_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice AVRC_INITIAL_TRACE_LEVEL
|
|
prompt "AVRC layer"
|
|
default AVRC_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for AVRC layer
|
|
|
|
config AVRC_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config AVRC_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config AVRC_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config AVRC_TRACE_LEVEL_API
|
|
bool "API"
|
|
config AVRC_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config AVRC_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config AVRC_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config AVRC_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if AVRC_TRACE_LEVEL_NONE
|
|
default 1 if AVRC_TRACE_LEVEL_ERROR
|
|
default 2 if AVRC_TRACE_LEVEL_WARNING
|
|
default 3 if AVRC_TRACE_LEVEL_API
|
|
default 4 if AVRC_TRACE_LEVEL_EVENT
|
|
default 5 if AVRC_TRACE_LEVEL_DEBUG
|
|
default 6 if AVRC_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice MCA_INITIAL_TRACE_LEVEL
|
|
prompt "MCA layer"
|
|
default MCA_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for MCA layer
|
|
|
|
config MCA_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config MCA_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config MCA_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config MCA_TRACE_LEVEL_API
|
|
bool "API"
|
|
config MCA_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config MCA_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config MCA_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config MCA_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if MCA_TRACE_LEVEL_NONE
|
|
default 1 if MCA_TRACE_LEVEL_ERROR
|
|
default 2 if MCA_TRACE_LEVEL_WARNING
|
|
default 3 if MCA_TRACE_LEVEL_API
|
|
default 4 if MCA_TRACE_LEVEL_EVENT
|
|
default 5 if MCA_TRACE_LEVEL_DEBUG
|
|
default 6 if MCA_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice HID_INITIAL_TRACE_LEVEL
|
|
prompt "HID layer"
|
|
default HID_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for HID layer
|
|
|
|
config HID_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config HID_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config HID_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config HID_TRACE_LEVEL_API
|
|
bool "API"
|
|
config HID_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config HID_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config HID_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config HID_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if HID_TRACE_LEVEL_NONE
|
|
default 1 if HID_TRACE_LEVEL_ERROR
|
|
default 2 if HID_TRACE_LEVEL_WARNING
|
|
default 3 if HID_TRACE_LEVEL_API
|
|
default 4 if HID_TRACE_LEVEL_EVENT
|
|
default 5 if HID_TRACE_LEVEL_DEBUG
|
|
default 6 if HID_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice APPL_INITIAL_TRACE_LEVEL
|
|
prompt "APPL layer"
|
|
default APPL_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for APPL layer
|
|
|
|
config APPL_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config APPL_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config APPL_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config APPL_TRACE_LEVEL_API
|
|
bool "API"
|
|
config APPL_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config APPL_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config APPL_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config APPL_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if APPL_TRACE_LEVEL_NONE
|
|
default 1 if APPL_TRACE_LEVEL_ERROR
|
|
default 2 if APPL_TRACE_LEVEL_WARNING
|
|
default 3 if APPL_TRACE_LEVEL_API
|
|
default 4 if APPL_TRACE_LEVEL_EVENT
|
|
default 5 if APPL_TRACE_LEVEL_DEBUG
|
|
default 6 if APPL_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice GATT_INITIAL_TRACE_LEVEL
|
|
prompt "GATT layer"
|
|
default GATT_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for GATT layer
|
|
|
|
config GATT_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config GATT_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config GATT_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config GATT_TRACE_LEVEL_API
|
|
bool "API"
|
|
config GATT_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config GATT_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config GATT_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config GATT_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if GATT_TRACE_LEVEL_NONE
|
|
default 1 if GATT_TRACE_LEVEL_ERROR
|
|
default 2 if GATT_TRACE_LEVEL_WARNING
|
|
default 3 if GATT_TRACE_LEVEL_API
|
|
default 4 if GATT_TRACE_LEVEL_EVENT
|
|
default 5 if GATT_TRACE_LEVEL_DEBUG
|
|
default 6 if GATT_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice SMP_INITIAL_TRACE_LEVEL
|
|
prompt "SMP layer"
|
|
default SMP_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for SMP layer
|
|
|
|
config SMP_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config SMP_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config SMP_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config SMP_TRACE_LEVEL_API
|
|
bool "API"
|
|
config SMP_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config SMP_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config SMP_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config SMP_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if SMP_TRACE_LEVEL_NONE
|
|
default 1 if SMP_TRACE_LEVEL_ERROR
|
|
default 2 if SMP_TRACE_LEVEL_WARNING
|
|
default 3 if SMP_TRACE_LEVEL_API
|
|
default 4 if SMP_TRACE_LEVEL_EVENT
|
|
default 5 if SMP_TRACE_LEVEL_DEBUG
|
|
default 6 if SMP_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice BTIF_INITIAL_TRACE_LEVEL
|
|
prompt "BTIF layer"
|
|
default BTIF_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for BTIF layer
|
|
|
|
config BTIF_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config BTIF_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config BTIF_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config BTIF_TRACE_LEVEL_API
|
|
bool "API"
|
|
config BTIF_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config BTIF_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config BTIF_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config BTIF_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if BTIF_TRACE_LEVEL_NONE
|
|
default 1 if BTIF_TRACE_LEVEL_ERROR
|
|
default 2 if BTIF_TRACE_LEVEL_WARNING
|
|
default 3 if BTIF_TRACE_LEVEL_API
|
|
default 4 if BTIF_TRACE_LEVEL_EVENT
|
|
default 5 if BTIF_TRACE_LEVEL_DEBUG
|
|
default 6 if BTIF_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice BTC_INITIAL_TRACE_LEVEL
|
|
prompt "BTC layer"
|
|
default BTC_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for BTC layer
|
|
|
|
config BTC_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config BTC_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config BTC_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config BTC_TRACE_LEVEL_API
|
|
bool "API"
|
|
config BTC_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config BTC_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config BTC_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config BTC_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if BTC_TRACE_LEVEL_NONE
|
|
default 1 if BTC_TRACE_LEVEL_ERROR
|
|
default 2 if BTC_TRACE_LEVEL_WARNING
|
|
default 3 if BTC_TRACE_LEVEL_API
|
|
default 4 if BTC_TRACE_LEVEL_EVENT
|
|
default 5 if BTC_TRACE_LEVEL_DEBUG
|
|
default 6 if BTC_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice OSI_INITIAL_TRACE_LEVEL
|
|
prompt "OSI layer"
|
|
default OSI_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for OSI layer
|
|
|
|
config OSI_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config OSI_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config OSI_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config OSI_TRACE_LEVEL_API
|
|
bool "API"
|
|
config OSI_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config OSI_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config OSI_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config OSI_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if OSI_TRACE_LEVEL_NONE
|
|
default 1 if OSI_TRACE_LEVEL_ERROR
|
|
default 2 if OSI_TRACE_LEVEL_WARNING
|
|
default 3 if OSI_TRACE_LEVEL_API
|
|
default 4 if OSI_TRACE_LEVEL_EVENT
|
|
default 5 if OSI_TRACE_LEVEL_DEBUG
|
|
default 6 if OSI_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
choice BLUFI_INITIAL_TRACE_LEVEL
|
|
prompt "BLUFI layer"
|
|
default BLUFI_TRACE_LEVEL_WARNING
|
|
depends on BLUEDROID_ENABLED && !BT_STACK_NO_LOG
|
|
help
|
|
Define BT trace level for BLUFI layer
|
|
|
|
config BLUFI_TRACE_LEVEL_NONE
|
|
bool "NONE"
|
|
config BLUFI_TRACE_LEVEL_ERROR
|
|
bool "ERROR"
|
|
config BLUFI_TRACE_LEVEL_WARNING
|
|
bool "WARNING"
|
|
config BLUFI_TRACE_LEVEL_API
|
|
bool "API"
|
|
config BLUFI_TRACE_LEVEL_EVENT
|
|
bool "EVENT"
|
|
config BLUFI_TRACE_LEVEL_DEBUG
|
|
bool "DEBUG"
|
|
config BLUFI_TRACE_LEVEL_VERBOSE
|
|
bool "VERBOSE"
|
|
endchoice
|
|
|
|
config BLUFI_INITIAL_TRACE_LEVEL
|
|
int
|
|
depends on BLUEDROID_ENABLED
|
|
default 0 if BLUFI_TRACE_LEVEL_NONE
|
|
default 1 if BLUFI_TRACE_LEVEL_ERROR
|
|
default 2 if BLUFI_TRACE_LEVEL_WARNING
|
|
default 3 if BLUFI_TRACE_LEVEL_API
|
|
default 4 if BLUFI_TRACE_LEVEL_EVENT
|
|
default 5 if BLUFI_TRACE_LEVEL_DEBUG
|
|
default 6 if BLUFI_TRACE_LEVEL_VERBOSE
|
|
default 2
|
|
|
|
endmenu #BT DEBUG LOG LEVEL
|
|
|
|
|
|
config BT_ACL_CONNECTIONS
|
|
int "BT/BLE MAX ACL CONNECTIONS(1~7)"
|
|
depends on BLUEDROID_ENABLED
|
|
range 1 7
|
|
default 4
|
|
help
|
|
Maximum BT/BLE connection count
|
|
|
|
config BT_ALLOCATION_FROM_SPIRAM_FIRST
|
|
bool "BT/BLE will first malloc the memory from the PSRAM"
|
|
depends on BLUEDROID_ENABLED
|
|
default n
|
|
help
|
|
This select can save the internal RAM if there have the PSRAM
|
|
|
|
config BT_BLE_DYNAMIC_ENV_MEMORY
|
|
bool "Use dynamic memory allocation in BT/BLE stack"
|
|
depends on BLUEDROID_ENABLED
|
|
default n
|
|
help
|
|
This select can make the allocation of memory will become more flexible
|
|
|
|
config BLE_HOST_QUEUE_CONGESTION_CHECK
|
|
bool "BLE queue congestion check"
|
|
depends on BLUEDROID_ENABLED
|
|
default n
|
|
help
|
|
When scanning and scan duplicate is not enabled, if there are a lot of adv packets around or application layer
|
|
handling adv packets is slow, it will cause the controller memory to run out. if enabled, adv packets will be
|
|
lost when host queue is congested.
|
|
|
|
config SMP_ENABLE
|
|
bool
|
|
depends on BLUEDROID_ENABLED
|
|
default CLASSIC_BT_ENABLED || BLE_SMP_ENABLE
|
|
|
|
config BLE_ACTIVE_SCAN_REPORT_ADV_SCAN_RSP_INDIVIDUALLY
|
|
bool "Report adv data and scan response individually when BLE active scan"
|
|
depends on BLUEDROID_ENABLED && (BTDM_CONTROLLER_MODE_BTDM || BTDM_CONTROLLER_MODE_BLE_ONLY)
|
|
default n
|
|
help
|
|
Originally, when doing BLE active scan, Bluedroid will not report adv to application layer
|
|
until receive scan response. This option is used to disable the behavior. When enable this option,
|
|
Bluedroid will report adv data or scan response to application layer immediately.
|
|
|
|
# Memory reserved at start of DRAM for Bluetooth stack
|
|
|
|
config BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT
|
|
int "Timeout of BLE connection establishment"
|
|
depends on BLUEDROID_ENABLED
|
|
range 1 60
|
|
default 30
|
|
help
|
|
Bluetooth Connection establishment maximum time, if connection time exceeds this value, the connection
|
|
establishment fails, ESP_GATTC_OPEN_EVT or ESP_GATTS_OPEN_EVT is triggered.
|
|
|
|
config BT_RESERVE_DRAM
|
|
hex
|
|
default 0xdb5c if BT_ENABLED
|
|
default 0
|
|
|
|
endmenu
|