The requirements of pin capabilites is different for spi master and slave. The master needs CS, SCLK, MOSI to be output-able, while slave needs MISO to be output-able. Previous code is for master only. This commit allows to place other 3 pins than MISO on input-only pins for slaves. Refactoring for spi_common is also included. Resolves https://github.com/espressif/esp-idf/issues/2455
1430 lines
54 KiB
C
1430 lines
54 KiB
C
/*
|
||
Tests for the spi_master device driver
|
||
*/
|
||
|
||
#include <esp_types.h>
|
||
#include <stdio.h>
|
||
#include <stdlib.h>
|
||
#include <malloc.h>
|
||
#include <string.h>
|
||
#include "rom/ets_sys.h"
|
||
#include "freertos/FreeRTOS.h"
|
||
#include "freertos/task.h"
|
||
#include "freertos/semphr.h"
|
||
#include "freertos/queue.h"
|
||
#include "freertos/xtensa_api.h"
|
||
#include "unity.h"
|
||
#include "driver/spi_master.h"
|
||
#include "driver/spi_slave.h"
|
||
#include "soc/dport_reg.h"
|
||
#include "esp_heap_caps.h"
|
||
#include "esp_log.h"
|
||
#include "soc/spi_periph.h"
|
||
#include "freertos/ringbuf.h"
|
||
#include "soc/gpio_periph.h"
|
||
|
||
const static char TAG[] = "test_spi";
|
||
|
||
#define PIN_NUM_MISO HSPI_IOMUX_PIN_NUM_MISO
|
||
#define PIN_NUM_MOSI HSPI_IOMUX_PIN_NUM_MOSI
|
||
#define PIN_NUM_CLK HSPI_IOMUX_PIN_NUM_CLK
|
||
#define PIN_NUM_CS HSPI_IOMUX_PIN_NUM_CS
|
||
|
||
#define TEST_SPI_HOST HSPI_HOST
|
||
#define TEST_SLAVE_HOST VSPI_HOST
|
||
|
||
#define SPI_BUS_TEST_DEFAULT_CONFIG() {\
|
||
.miso_io_num=PIN_NUM_MISO, \
|
||
.mosi_io_num=PIN_NUM_MOSI,\
|
||
.sclk_io_num=PIN_NUM_CLK,\
|
||
.quadwp_io_num=-1,\
|
||
.quadhd_io_num=-1\
|
||
}
|
||
|
||
#define SPI_DEVICE_TEST_DEFAULT_CONFIG() {\
|
||
.clock_speed_hz=10*1000*1000,\
|
||
.mode=0,\
|
||
.spics_io_num=PIN_NUM_CS,\
|
||
.queue_size=16,\
|
||
.pre_cb=NULL, \
|
||
.cs_ena_pretrans = 0,\
|
||
.cs_ena_posttrans = 0,\
|
||
.input_delay_ns = 62.5,\
|
||
}
|
||
|
||
//default device config for slave devices
|
||
#define SPI_SLAVE_TEST_DEFAULT_CONFIG() {\
|
||
.mode=0,\
|
||
.spics_io_num=PIN_NUM_CS,\
|
||
.queue_size=3,\
|
||
.flags=0,\
|
||
}
|
||
|
||
#define FUNC_SPI 1
|
||
#define FUNC_GPIO 2
|
||
|
||
void gpio_output_sel(uint32_t gpio_num, int func, uint32_t signal_idx)
|
||
{
|
||
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio_num], func);
|
||
GPIO.func_out_sel_cfg[gpio_num].func_sel=signal_idx;
|
||
}
|
||
|
||
static void check_spi_pre_n_for(int clk, int pre, int n)
|
||
{
|
||
esp_err_t ret;
|
||
spi_device_handle_t handle;
|
||
|
||
spi_device_interface_config_t devcfg={
|
||
.command_bits=0,
|
||
.address_bits=0,
|
||
.dummy_bits=0,
|
||
.clock_speed_hz=clk,
|
||
.duty_cycle_pos=128,
|
||
.mode=0,
|
||
.spics_io_num=21,
|
||
.queue_size=3
|
||
};
|
||
char sendbuf[16]="";
|
||
spi_transaction_t t;
|
||
memset(&t, 0, sizeof(t));
|
||
|
||
ret=spi_bus_add_device(HSPI_HOST, &devcfg, &handle);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
|
||
t.length=16*8;
|
||
t.tx_buffer=sendbuf;
|
||
ret=spi_device_transmit(handle, &t);
|
||
|
||
printf("Checking clk rate %dHz. expect pre %d n %d, got pre %d n %d\n", clk, pre, n, SPI2.clock.clkdiv_pre+1, SPI2.clock.clkcnt_n+1);
|
||
|
||
TEST_ASSERT(SPI2.clock.clkcnt_n+1==n);
|
||
TEST_ASSERT(SPI2.clock.clkdiv_pre+1==pre);
|
||
|
||
ret=spi_bus_remove_device(handle);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
}
|
||
|
||
|
||
TEST_CASE("SPI Master clockdiv calculation routines", "[spi]")
|
||
{
|
||
spi_bus_config_t buscfg={
|
||
.mosi_io_num=4,
|
||
.miso_io_num=26,
|
||
.sclk_io_num=25,
|
||
.quadwp_io_num=-1,
|
||
.quadhd_io_num=-1
|
||
};
|
||
esp_err_t ret;
|
||
ret=spi_bus_initialize(HSPI_HOST, &buscfg, 1);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
|
||
check_spi_pre_n_for(26000000, 1, 3);
|
||
check_spi_pre_n_for(20000000, 1, 4);
|
||
check_spi_pre_n_for(8000000, 1, 10);
|
||
check_spi_pre_n_for(800000, 2, 50);
|
||
check_spi_pre_n_for(100000, 16, 50);
|
||
check_spi_pre_n_for(333333, 4, 60);
|
||
check_spi_pre_n_for(900000, 2, 44);
|
||
check_spi_pre_n_for(1, 8192, 64); //Actually should generate the minimum clock speed, 152Hz
|
||
check_spi_pre_n_for(26000000, 1, 3);
|
||
|
||
ret=spi_bus_free(HSPI_HOST);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
}
|
||
|
||
static spi_device_handle_t setup_spi_bus(int clkspeed, bool dma) {
|
||
spi_bus_config_t buscfg={
|
||
.mosi_io_num=4,
|
||
.miso_io_num=26,
|
||
.sclk_io_num=25,
|
||
.quadwp_io_num=-1,
|
||
.quadhd_io_num=-1,
|
||
.max_transfer_sz=4096*3
|
||
};
|
||
spi_device_interface_config_t devcfg={
|
||
.command_bits=0,
|
||
.address_bits=0,
|
||
.dummy_bits=0,
|
||
.clock_speed_hz=clkspeed,
|
||
.duty_cycle_pos=128,
|
||
.mode=0,
|
||
.spics_io_num=21,
|
||
.queue_size=3,
|
||
};
|
||
esp_err_t ret;
|
||
spi_device_handle_t handle;
|
||
printf("THIS TEST NEEDS A JUMPER BETWEEN IO4 AND IO26\n");
|
||
|
||
ret=spi_bus_initialize(HSPI_HOST, &buscfg, dma?1:0);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
ret=spi_bus_add_device(HSPI_HOST, &devcfg, &handle);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
printf("Bus/dev inited.\n");
|
||
return handle;
|
||
}
|
||
|
||
static void spi_test(spi_device_handle_t handle, int num_bytes) {
|
||
esp_err_t ret;
|
||
int x;
|
||
srand(num_bytes);
|
||
char *sendbuf=heap_caps_malloc(num_bytes, MALLOC_CAP_DMA);
|
||
char *recvbuf=heap_caps_malloc(num_bytes, MALLOC_CAP_DMA);
|
||
for (x=0; x<num_bytes; x++) {
|
||
sendbuf[x]=rand()&0xff;
|
||
recvbuf[x]=0x55;
|
||
}
|
||
|
||
spi_transaction_t t;
|
||
memset(&t, 0, sizeof(t));
|
||
t.length=num_bytes*8;
|
||
t.tx_buffer=sendbuf;
|
||
t.rx_buffer=recvbuf;
|
||
t.addr=0xA00000000000000FL;
|
||
t.cmd=0x55;
|
||
|
||
printf("Transmitting %d bytes...\n", num_bytes);
|
||
ret=spi_device_transmit(handle, &t);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
|
||
srand(num_bytes);
|
||
for (x=0; x<num_bytes; x++) {
|
||
if (sendbuf[x]!=(rand()&0xff)) {
|
||
printf("Huh? Sendbuf corrupted at byte %d\n", x);
|
||
TEST_ASSERT(0);
|
||
}
|
||
if (sendbuf[x]!=recvbuf[x]) break;
|
||
}
|
||
if (x!=num_bytes) {
|
||
int from=x-16;
|
||
if (from<0) from=0;
|
||
printf("Error at %d! Sent vs recved: (starting from %d)\n" , x, from);
|
||
for (int i=0; i<32; i++) {
|
||
if (i+from<num_bytes) printf("%02X ", sendbuf[from+i]);
|
||
}
|
||
printf("\n");
|
||
for (int i=0; i<32; i++) {
|
||
if (i+from<num_bytes) printf("%02X ", recvbuf[from+i]);
|
||
}
|
||
printf("\n");
|
||
// TEST_ASSERT(0);
|
||
}
|
||
|
||
printf("Success!\n");
|
||
|
||
free(sendbuf);
|
||
free(recvbuf);
|
||
}
|
||
|
||
static void destroy_spi_bus(spi_device_handle_t handle) {
|
||
esp_err_t ret;
|
||
ret=spi_bus_remove_device(handle);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
ret=spi_bus_free(HSPI_HOST);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
}
|
||
|
||
|
||
#define TEST_LEN 111
|
||
|
||
TEST_CASE("SPI Master test", "[spi][ignore]")
|
||
{
|
||
printf("Testing bus at 80KHz\n");
|
||
spi_device_handle_t handle=setup_spi_bus(80000, true);
|
||
spi_test(handle, 16); //small
|
||
spi_test(handle, 21); //small, unaligned
|
||
spi_test(handle, 36); //aligned
|
||
spi_test(handle, 128); //aligned
|
||
spi_test(handle, 129); //unaligned
|
||
spi_test(handle, 4096-2); //multiple descs, edge case 1
|
||
spi_test(handle, 4096-1); //multiple descs, edge case 2
|
||
spi_test(handle, 4096*3); //multiple descs
|
||
|
||
destroy_spi_bus(handle);
|
||
|
||
printf("Testing bus at 80KHz, non-DMA\n");
|
||
handle=setup_spi_bus(80000, false);
|
||
spi_test(handle, 4); //aligned
|
||
spi_test(handle, 16); //small
|
||
spi_test(handle, 21); //small, unaligned
|
||
|
||
destroy_spi_bus(handle);
|
||
|
||
|
||
printf("Testing bus at 26MHz\n");
|
||
handle=setup_spi_bus(20000000, true);
|
||
|
||
spi_test(handle, 128); //DMA, aligned
|
||
spi_test(handle, 4096*3); //DMA, multiple descs
|
||
destroy_spi_bus(handle);
|
||
|
||
printf("Testing bus at 900KHz\n");
|
||
handle=setup_spi_bus(9000000, true);
|
||
|
||
spi_test(handle, 128); //DMA, aligned
|
||
spi_test(handle, 4096*3); //DMA, multiple descs
|
||
destroy_spi_bus(handle);
|
||
}
|
||
|
||
|
||
TEST_CASE("SPI Master test, interaction of multiple devs", "[spi][ignore]") {
|
||
esp_err_t ret;
|
||
spi_device_interface_config_t devcfg={
|
||
.command_bits=0,
|
||
.address_bits=0,
|
||
.dummy_bits=0,
|
||
.clock_speed_hz=1000000,
|
||
.duty_cycle_pos=128,
|
||
.mode=0,
|
||
.spics_io_num=23,
|
||
.queue_size=3,
|
||
};
|
||
spi_device_handle_t handle1=setup_spi_bus(80000, true);
|
||
spi_device_handle_t handle2;
|
||
spi_bus_add_device(HSPI_HOST, &devcfg, &handle2);
|
||
|
||
printf("Sending to dev 1\n");
|
||
spi_test(handle1, 7);
|
||
printf("Sending to dev 1\n");
|
||
spi_test(handle1, 15);
|
||
printf("Sending to dev 2\n");
|
||
spi_test(handle2, 15);
|
||
printf("Sending to dev 1\n");
|
||
spi_test(handle1, 32);
|
||
printf("Sending to dev 2\n");
|
||
spi_test(handle2, 32);
|
||
printf("Sending to dev 1\n");
|
||
spi_test(handle1, 63);
|
||
printf("Sending to dev 2\n");
|
||
spi_test(handle2, 63);
|
||
printf("Sending to dev 1\n");
|
||
spi_test(handle1, 5000);
|
||
printf("Sending to dev 2\n");
|
||
spi_test(handle2, 5000);
|
||
|
||
|
||
ret=spi_bus_remove_device(handle2);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
destroy_spi_bus(handle1);
|
||
}
|
||
|
||
static esp_err_t test_master_pins(int mosi, int miso, int sclk, int cs)
|
||
{
|
||
esp_err_t ret;
|
||
spi_bus_config_t cfg = SPI_BUS_TEST_DEFAULT_CONFIG();
|
||
cfg.mosi_io_num = mosi;
|
||
cfg.miso_io_num = miso;
|
||
cfg.sclk_io_num = sclk;
|
||
|
||
spi_device_interface_config_t master_cfg = SPI_DEVICE_TEST_DEFAULT_CONFIG();
|
||
master_cfg.spics_io_num = cs;
|
||
|
||
ret = spi_bus_initialize(TEST_SPI_HOST, &cfg, 1);
|
||
if (ret != ESP_OK) return ret;
|
||
|
||
spi_device_handle_t spi;
|
||
ret = spi_bus_add_device(TEST_SPI_HOST, &master_cfg, &spi);
|
||
if (ret != ESP_OK) {
|
||
spi_bus_free(TEST_SPI_HOST);
|
||
return ret;
|
||
}
|
||
|
||
TEST_ASSERT(spi_bus_remove_device(spi) == ESP_OK);
|
||
TEST_ASSERT(spi_bus_free(TEST_SPI_HOST) == ESP_OK);
|
||
return ESP_OK;
|
||
}
|
||
|
||
static esp_err_t test_slave_pins(int mosi, int miso, int sclk, int cs)
|
||
{
|
||
esp_err_t ret;
|
||
spi_bus_config_t cfg = SPI_BUS_TEST_DEFAULT_CONFIG();
|
||
cfg.mosi_io_num = mosi;
|
||
cfg.miso_io_num = miso;
|
||
cfg.sclk_io_num = sclk;
|
||
|
||
spi_slave_interface_config_t slave_cfg = SPI_SLAVE_TEST_DEFAULT_CONFIG();
|
||
slave_cfg.spics_io_num = cs;
|
||
|
||
ret = spi_slave_initialize(TEST_SLAVE_HOST, &cfg, &slave_cfg, 1);
|
||
if (ret != ESP_OK) return ret;
|
||
|
||
spi_slave_free(TEST_SLAVE_HOST);
|
||
return ESP_OK;
|
||
}
|
||
|
||
TEST_CASE("spi placed on input-only pins", "[spi]")
|
||
{
|
||
TEST_ESP_OK(test_master_pins(PIN_NUM_MOSI, PIN_NUM_MISO, PIN_NUM_CLK, PIN_NUM_CS));
|
||
TEST_ASSERT(test_master_pins(34, PIN_NUM_MISO, PIN_NUM_CLK, PIN_NUM_CS)!=ESP_OK);
|
||
TEST_ESP_OK(test_master_pins(PIN_NUM_MOSI, 34, PIN_NUM_CLK, PIN_NUM_CS));
|
||
TEST_ASSERT(test_master_pins(PIN_NUM_MOSI, PIN_NUM_MISO, 34, PIN_NUM_CS)!=ESP_OK);
|
||
TEST_ASSERT(test_master_pins(PIN_NUM_MOSI, PIN_NUM_MISO, PIN_NUM_CLK, 34)!=ESP_OK);
|
||
|
||
TEST_ESP_OK(test_slave_pins(PIN_NUM_MOSI, PIN_NUM_MISO, PIN_NUM_CLK, PIN_NUM_CS));
|
||
TEST_ESP_OK(test_slave_pins(34, PIN_NUM_MISO, PIN_NUM_CLK, PIN_NUM_CS));
|
||
TEST_ASSERT(test_slave_pins(PIN_NUM_MOSI, 34, PIN_NUM_CLK, PIN_NUM_CS)!=ESP_OK);
|
||
TEST_ESP_OK(test_slave_pins(PIN_NUM_MOSI, PIN_NUM_MISO, 34, PIN_NUM_CS));
|
||
TEST_ESP_OK(test_slave_pins(PIN_NUM_MOSI, PIN_NUM_MISO, PIN_NUM_CLK, 34));
|
||
}
|
||
|
||
TEST_CASE("spi bus setting with different pin configs", "[spi]")
|
||
{
|
||
spi_bus_config_t cfg;
|
||
uint32_t flags_o;
|
||
uint32_t flags_expected;
|
||
|
||
ESP_LOGI(TAG, "test 6 iomux output pins...");
|
||
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO | SPICOMMON_BUSFLAG_NATIVE_PINS | SPICOMMON_BUSFLAG_QUAD;
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
|
||
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
|
||
|
||
ESP_LOGI(TAG, "test 4 iomux output pins...");
|
||
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO | SPICOMMON_BUSFLAG_NATIVE_PINS | SPICOMMON_BUSFLAG_DUAL;
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
|
||
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
|
||
|
||
ESP_LOGI(TAG, "test 6 output pins...");
|
||
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO | SPICOMMON_BUSFLAG_QUAD;
|
||
//swap MOSI and MISO
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MISO, .miso_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
|
||
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
|
||
|
||
ESP_LOGI(TAG, "test 4 output pins...");
|
||
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO | SPICOMMON_BUSFLAG_DUAL;
|
||
//swap MOSI and MISO
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MISO, .miso_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
|
||
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
|
||
|
||
ESP_LOGI(TAG, "test master 5 output pins and MOSI on input-only pin...");
|
||
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO | SPICOMMON_BUSFLAG_WPHD;
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = 34, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
|
||
|
||
ESP_LOGI(TAG, "test slave 5 output pins and MISO on input-only pin...");
|
||
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO | SPICOMMON_BUSFLAG_WPHD;
|
||
cfg = (spi_bus_config_t){.mosi_io_num = 34, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
|
||
|
||
ESP_LOGI(TAG, "test master 3 output pins and MOSI on input-only pin...");
|
||
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO;
|
||
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = 34, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
|
||
|
||
ESP_LOGI(TAG, "test slave 3 output pins and MISO on input-only pin...");
|
||
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO;
|
||
cfg = (spi_bus_config_t){.mosi_io_num = 34, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
|
||
|
||
ESP_LOGI(TAG, "check native flag for 6 output pins...");
|
||
flags_expected = SPICOMMON_BUSFLAG_NATIVE_PINS;
|
||
//swap MOSI and MISO
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MISO, .miso_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
|
||
ESP_LOGI(TAG, "check native flag for 4 output pins...");
|
||
flags_expected = SPICOMMON_BUSFLAG_NATIVE_PINS;
|
||
//swap MOSI and MISO
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MISO, .miso_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
|
||
ESP_LOGI(TAG, "check dual flag for master 5 output pins and MISO/MOSI on input-only pin...");
|
||
flags_expected = SPICOMMON_BUSFLAG_DUAL;
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = 34, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
cfg = (spi_bus_config_t){.mosi_io_num = 34, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
|
||
ESP_LOGI(TAG, "check dual flag for master 3 output pins and MISO/MOSI on input-only pin...");
|
||
flags_expected = SPICOMMON_BUSFLAG_DUAL;
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = 34, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
cfg = (spi_bus_config_t){.mosi_io_num = 34, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
|
||
ESP_LOGI(TAG, "check sclk flag...");
|
||
flags_expected = SPICOMMON_BUSFLAG_SCLK;
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = -1, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
|
||
ESP_LOGI(TAG, "check mosi flag...");
|
||
flags_expected = SPICOMMON_BUSFLAG_MOSI;
|
||
cfg = (spi_bus_config_t){.mosi_io_num = -1, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
|
||
ESP_LOGI(TAG, "check miso flag...");
|
||
flags_expected = SPICOMMON_BUSFLAG_MISO;
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = -1, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
|
||
ESP_LOGI(TAG, "check quad flag...");
|
||
flags_expected = SPICOMMON_BUSFLAG_QUAD;
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = -1,
|
||
.max_transfer_sz = 8, .flags = flags_expected};
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
|
||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
|
||
}
|
||
|
||
TEST_CASE("SPI Master no response when switch from host1 (HSPI) to host2 (VSPI)", "[spi]")
|
||
{
|
||
//spi config
|
||
spi_bus_config_t bus_config;
|
||
spi_device_interface_config_t device_config;
|
||
spi_device_handle_t spi;
|
||
spi_host_device_t host;
|
||
int dma = 1;
|
||
|
||
memset(&bus_config, 0, sizeof(spi_bus_config_t));
|
||
memset(&device_config, 0, sizeof(spi_device_interface_config_t));
|
||
|
||
bus_config.miso_io_num = -1;
|
||
bus_config.mosi_io_num = 26;
|
||
bus_config.sclk_io_num = 25;
|
||
bus_config.quadwp_io_num = -1;
|
||
bus_config.quadhd_io_num = -1;
|
||
|
||
device_config.clock_speed_hz = 50000;
|
||
device_config.mode = 0;
|
||
device_config.spics_io_num = -1;
|
||
device_config.queue_size = 1;
|
||
device_config.flags = SPI_DEVICE_TXBIT_LSBFIRST | SPI_DEVICE_RXBIT_LSBFIRST;
|
||
|
||
struct spi_transaction_t transaction = {
|
||
.flags = SPI_TRANS_USE_TXDATA | SPI_TRANS_USE_RXDATA,
|
||
.length = 16,
|
||
.rx_buffer = NULL,
|
||
.tx_data = {0x04, 0x00}
|
||
};
|
||
|
||
//initialize for first host
|
||
host = 1;
|
||
|
||
TEST_ASSERT(spi_bus_initialize(host, &bus_config, dma) == ESP_OK);
|
||
TEST_ASSERT(spi_bus_add_device(host, &device_config, &spi) == ESP_OK);
|
||
|
||
printf("before first xmit\n");
|
||
TEST_ASSERT(spi_device_transmit(spi, &transaction) == ESP_OK);
|
||
printf("after first xmit\n");
|
||
|
||
TEST_ASSERT(spi_bus_remove_device(spi) == ESP_OK);
|
||
TEST_ASSERT(spi_bus_free(host) == ESP_OK);
|
||
|
||
//for second host and failed before
|
||
host = 2;
|
||
|
||
TEST_ASSERT(spi_bus_initialize(host, &bus_config, dma) == ESP_OK);
|
||
TEST_ASSERT(spi_bus_add_device(host, &device_config, &spi) == ESP_OK);
|
||
|
||
printf("before second xmit\n");
|
||
// the original version (bit mis-written) stucks here.
|
||
TEST_ASSERT(spi_device_transmit(spi, &transaction) == ESP_OK);
|
||
// test case success when see this.
|
||
printf("after second xmit\n");
|
||
|
||
TEST_ASSERT(spi_bus_remove_device(spi) == ESP_OK);
|
||
TEST_ASSERT(spi_bus_free(host) == ESP_OK);
|
||
}
|
||
|
||
IRAM_ATTR static uint32_t data_iram[320];
|
||
DRAM_ATTR static uint32_t data_dram[320]={0};
|
||
//force to place in code area.
|
||
static const uint32_t data_drom[320] = {0};
|
||
|
||
#if 1 //HSPI
|
||
#define PIN_NUM_MISO HSPI_IOMUX_PIN_NUM_MISO
|
||
#define PIN_NUM_MOSI HSPI_IOMUX_PIN_NUM_MOSI
|
||
#define PIN_NUM_CLK HSPI_IOMUX_PIN_NUM_CLK
|
||
#define PIN_NUM_CS HSPI_IOMUX_PIN_NUM_CS
|
||
#elif 1 //VSPI
|
||
#define PIN_NUM_MISO VSPI_IOMUX_PIN_NUM_MISO
|
||
#define PIN_NUM_MOSI VSPI_IOMUX_PIN_NUM_MOSI
|
||
#define PIN_NUM_CLK VSPI_IOMUX_PIN_NUM_CLK
|
||
#define PIN_NUM_CS VSPI_IOMUX_PIN_NUM_CS
|
||
#endif
|
||
|
||
#define PIN_NUM_DC 21
|
||
#define PIN_NUM_RST 18
|
||
#define PIN_NUM_BCKL 5
|
||
|
||
TEST_CASE("SPI Master DMA test, TX and RX in different regions", "[spi]")
|
||
{
|
||
uint32_t data_rxdram[320];
|
||
|
||
esp_err_t ret;
|
||
spi_device_handle_t spi;
|
||
spi_bus_config_t buscfg={
|
||
.miso_io_num=PIN_NUM_MISO,
|
||
.mosi_io_num=PIN_NUM_MOSI,
|
||
.sclk_io_num=PIN_NUM_CLK,
|
||
.quadwp_io_num=-1,
|
||
.quadhd_io_num=-1
|
||
};
|
||
spi_device_interface_config_t devcfg={
|
||
.clock_speed_hz=10000000, //Clock out at 10 MHz
|
||
.mode=0, //SPI mode 0
|
||
.spics_io_num=PIN_NUM_CS, //CS pin
|
||
.queue_size=7, //We want to be able to queue 7 transactions at a time
|
||
.pre_cb=NULL, //Specify pre-transfer callback to handle D/C line
|
||
};
|
||
//Initialize the SPI bus
|
||
ret=spi_bus_initialize(HSPI_HOST, &buscfg, 1);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
//Attach the LCD to the SPI bus
|
||
ret=spi_bus_add_device(HSPI_HOST, &devcfg, &spi);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
|
||
static spi_transaction_t trans[6];
|
||
int x;
|
||
|
||
printf("iram: %p, dram: %p, drom: %p\n", data_iram, data_dram, data_drom);
|
||
|
||
memset(trans, 0, 6*sizeof(spi_transaction_t));
|
||
|
||
trans[0].length = 320*8,
|
||
trans[0].tx_buffer = data_iram;
|
||
trans[0].rx_buffer = data_rxdram;
|
||
|
||
trans[1].length = 320*8,
|
||
trans[1].tx_buffer = data_dram;
|
||
trans[1].rx_buffer = data_rxdram;
|
||
|
||
trans[2].length = 320*8,
|
||
trans[2].tx_buffer = data_drom;
|
||
trans[2].rx_buffer = data_rxdram;
|
||
|
||
trans[3].length = 320*8,
|
||
trans[3].tx_buffer = data_drom;
|
||
trans[3].rx_buffer = data_iram;
|
||
|
||
trans[4].length = 320*8,
|
||
trans[4].rxlength = 8*4;
|
||
trans[4].tx_buffer = data_drom;
|
||
trans[4].flags = SPI_TRANS_USE_RXDATA;
|
||
|
||
trans[5].length = 8*4;
|
||
trans[5].flags = SPI_TRANS_USE_RXDATA | SPI_TRANS_USE_TXDATA;
|
||
|
||
//Queue all transactions.
|
||
for (x=0; x<6; x++) {
|
||
ret=spi_device_queue_trans(spi,&trans[x], portMAX_DELAY);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
}
|
||
|
||
for (x=0; x<6; x++) {
|
||
spi_transaction_t* ptr;
|
||
ret=spi_device_get_trans_result(spi,&ptr, portMAX_DELAY);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
TEST_ASSERT(ptr = trans+x);
|
||
}
|
||
|
||
TEST_ASSERT(spi_bus_remove_device(spi) == ESP_OK);
|
||
TEST_ASSERT(spi_bus_free(HSPI_HOST) == ESP_OK);
|
||
}
|
||
|
||
//this part tests 3 DMA issues in master mode, full-duplex in IDF2.1
|
||
// 1. RX buffer not aligned (start and end)
|
||
// 2. not setting rx_buffer
|
||
// 3. setting rx_length != length
|
||
TEST_CASE("SPI Master DMA test: length, start, not aligned", "[spi]")
|
||
{
|
||
uint8_t tx_buf[320]={0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0xde, 0xf0, 0xaa, 0xcc, 0xff, 0xee, 0x55, 0x77, 0x88, 0x43};
|
||
uint8_t rx_buf[320];
|
||
|
||
esp_err_t ret;
|
||
spi_device_handle_t spi;
|
||
spi_bus_config_t buscfg={
|
||
.miso_io_num=PIN_NUM_MOSI,
|
||
.mosi_io_num=PIN_NUM_MOSI,
|
||
.sclk_io_num=PIN_NUM_CLK,
|
||
.quadwp_io_num=-1,
|
||
.quadhd_io_num=-1
|
||
};
|
||
spi_device_interface_config_t devcfg={
|
||
.clock_speed_hz=10*1000*1000, //Clock out at 10 MHz
|
||
.mode=0, //SPI mode 0
|
||
.spics_io_num=PIN_NUM_CS, //CS pin
|
||
.queue_size=7, //We want to be able to queue 7 transactions at a time
|
||
.pre_cb=NULL,
|
||
};
|
||
//Initialize the SPI bus
|
||
ret=spi_bus_initialize(HSPI_HOST, &buscfg, 1);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
//Attach the LCD to the SPI bus
|
||
ret=spi_bus_add_device(HSPI_HOST, &devcfg, &spi);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
|
||
//connect MOSI to two devices breaks the output, fix it.
|
||
gpio_output_sel(buscfg.mosi_io_num, FUNC_GPIO, HSPID_OUT_IDX);
|
||
|
||
memset(rx_buf, 0x66, 320);
|
||
|
||
for ( int i = 0; i < 8; i ++ ) {
|
||
memset( rx_buf, 0x66, sizeof(rx_buf));
|
||
|
||
spi_transaction_t t = {};
|
||
t.length = 8*(i+1);
|
||
t.rxlength = 0;
|
||
t.tx_buffer = tx_buf+2*i;
|
||
t.rx_buffer = rx_buf + i;
|
||
|
||
if ( i == 1 ) {
|
||
//test set no start
|
||
t.rx_buffer = NULL;
|
||
} else if ( i == 2 ) {
|
||
//test rx length != tx_length
|
||
t.rxlength = t.length - 8;
|
||
}
|
||
spi_device_transmit( spi, &t );
|
||
|
||
for( int i = 0; i < 16; i ++ ) {
|
||
printf("%02X ", rx_buf[i]);
|
||
}
|
||
printf("\n");
|
||
|
||
if ( i == 1 ) {
|
||
// no rx, skip check
|
||
} else if ( i == 2 ) {
|
||
//test rx length = tx length-1
|
||
TEST_ASSERT_EQUAL_HEX8_ARRAY(t.tx_buffer, t.rx_buffer, t.length/8-1 );
|
||
} else {
|
||
//normal check
|
||
TEST_ASSERT_EQUAL_HEX8_ARRAY(t.tx_buffer, t.rx_buffer, t.length/8 );
|
||
}
|
||
}
|
||
|
||
TEST_ASSERT(spi_bus_remove_device(spi) == ESP_OK);
|
||
TEST_ASSERT(spi_bus_free(HSPI_HOST) == ESP_OK);
|
||
}
|
||
|
||
static const char MASTER_TAG[] = "test_master";
|
||
static const char SLAVE_TAG[] = "test_slave";
|
||
DRAM_ATTR static uint8_t master_send[] = {0x93, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0xde, 0xf0, 0xaa, 0xcc, 0xff, 0xee, 0x55, 0x77, 0x88, 0x43};
|
||
DRAM_ATTR static uint8_t slave_send[] = { 0xaa, 0xdc, 0xba, 0x98, 0x76, 0x54, 0x32, 0x10, 0x13, 0x57, 0x9b, 0xdf, 0x24, 0x68, 0xac, 0xe0 };
|
||
|
||
|
||
static void master_deinit(spi_device_handle_t spi)
|
||
{
|
||
TEST_ESP_OK( spi_bus_remove_device(spi) );
|
||
TEST_ESP_OK( spi_bus_free(HSPI_HOST) );
|
||
}
|
||
|
||
static void slave_pull_up(const spi_bus_config_t* cfg, int spics_io_num)
|
||
{
|
||
gpio_set_pull_mode(cfg->mosi_io_num, GPIO_PULLUP_ENABLE);
|
||
gpio_set_pull_mode(cfg->sclk_io_num, GPIO_PULLUP_ENABLE);
|
||
gpio_set_pull_mode(spics_io_num, GPIO_PULLUP_ENABLE);
|
||
}
|
||
|
||
typedef struct {
|
||
uint32_t len;
|
||
uint8_t *start;
|
||
} slave_txdata_t;
|
||
|
||
typedef struct {
|
||
uint32_t len;
|
||
uint8_t* tx_start;
|
||
uint8_t data[1];
|
||
} slave_rxdata_t;
|
||
|
||
typedef struct {
|
||
spi_host_device_t spi;
|
||
RingbufHandle_t data_received;
|
||
QueueHandle_t data_to_send;
|
||
} spi_slave_task_context_t;
|
||
|
||
esp_err_t init_slave_context(spi_slave_task_context_t *context)
|
||
{
|
||
context->data_to_send = xQueueCreate( 16, sizeof( slave_txdata_t ));
|
||
if ( context->data_to_send == NULL ) {
|
||
return ESP_ERR_NO_MEM;
|
||
}
|
||
context->data_received = xRingbufferCreate( 1024, RINGBUF_TYPE_NOSPLIT );
|
||
if ( context->data_received == NULL ) {
|
||
return ESP_ERR_NO_MEM;
|
||
}
|
||
context->spi=VSPI_HOST;
|
||
return ESP_OK;
|
||
}
|
||
|
||
void deinit_slave_context(spi_slave_task_context_t *context)
|
||
{
|
||
TEST_ASSERT( context->data_to_send != NULL );
|
||
vQueueDelete( context->data_to_send );
|
||
context->data_to_send = NULL;
|
||
TEST_ASSERT( context->data_received != NULL );
|
||
vRingbufferDelete( context->data_received );
|
||
context->data_received = NULL;
|
||
}
|
||
|
||
/* The task requires a queue and a ringbuf, which should be initialized before task starts.
|
||
Send ``slave_txdata_t`` to the queue to make the task send data;
|
||
the task returns data got to the ringbuf, which should have sufficient size.
|
||
*/
|
||
static void task_slave(void* arg)
|
||
{
|
||
spi_slave_task_context_t* context = (spi_slave_task_context_t*) arg;
|
||
QueueHandle_t queue = context->data_to_send;
|
||
RingbufHandle_t ringbuf = context->data_received;
|
||
uint8_t recvbuf[320+8];
|
||
slave_txdata_t txdata;
|
||
|
||
ESP_LOGI( SLAVE_TAG, "slave up" );
|
||
//never quit, but blocked by the queue, waiting to be killed, when no more send from main task.
|
||
while( 1 ) {
|
||
xQueueReceive( queue, &txdata, portMAX_DELAY );
|
||
|
||
ESP_LOGI( "test", "to send: %p", txdata.start );
|
||
spi_slave_transaction_t t = {};
|
||
t.length = txdata.len;
|
||
t.tx_buffer = txdata.start;
|
||
t.rx_buffer = recvbuf+8;
|
||
//loop until trans_len != 0 to skip glitches
|
||
memset(recvbuf, 0x66, sizeof(recvbuf));
|
||
do {
|
||
TEST_ESP_OK( spi_slave_transmit( context->spi, &t, portMAX_DELAY ) );
|
||
} while ( t.trans_len == 0 );
|
||
memcpy(recvbuf, &t.trans_len, sizeof(uint32_t));
|
||
*(uint8_t**)(recvbuf+4) = txdata.start;
|
||
ESP_LOGI( SLAVE_TAG, "received: %d", t.trans_len );
|
||
xRingbufferSend( ringbuf, recvbuf, 8+(t.trans_len+7)/8, portMAX_DELAY );
|
||
}
|
||
}
|
||
|
||
#define TEST_SPI_HOST HSPI_HOST
|
||
#define TEST_SLAVE_HOST VSPI_HOST
|
||
|
||
static uint8_t bitswap(uint8_t in)
|
||
{
|
||
uint8_t out = 0;
|
||
for (int i = 0; i < 8; i++) {
|
||
out = out >> 1;
|
||
if (in&0x80) out |= 0x80;
|
||
in = in << 1;
|
||
}
|
||
return out;
|
||
}
|
||
|
||
void test_cmd_addr(spi_slave_task_context_t *slave_context, bool lsb_first)
|
||
{
|
||
spi_device_handle_t spi;
|
||
|
||
ESP_LOGI(MASTER_TAG, ">>>>>>>>> TEST %s FIRST <<<<<<<<<<<", lsb_first?"LSB":"MSB");
|
||
|
||
//initial master, mode 0, 1MHz
|
||
spi_bus_config_t buscfg=SPI_BUS_TEST_DEFAULT_CONFIG();
|
||
TEST_ESP_OK(spi_bus_initialize(TEST_SPI_HOST, &buscfg, 1));
|
||
spi_device_interface_config_t devcfg=SPI_DEVICE_TEST_DEFAULT_CONFIG();
|
||
devcfg.clock_speed_hz = 1*1000*1000;
|
||
if (lsb_first) devcfg.flags |= SPI_DEVICE_BIT_LSBFIRST;
|
||
TEST_ESP_OK(spi_bus_add_device(TEST_SPI_HOST, &devcfg, &spi));
|
||
|
||
//connecting pins to two peripherals breaks the output, fix it.
|
||
gpio_output_sel(buscfg.mosi_io_num, FUNC_GPIO, spi_periph_signal[TEST_SPI_HOST].spid_out);
|
||
gpio_output_sel(buscfg.miso_io_num, FUNC_GPIO, spi_periph_signal[TEST_SLAVE_HOST].spiq_out);
|
||
gpio_output_sel(devcfg.spics_io_num, FUNC_GPIO, spi_periph_signal[TEST_SPI_HOST].spics_out[0]);
|
||
gpio_output_sel(buscfg.sclk_io_num, FUNC_GPIO, spi_periph_signal[TEST_SPI_HOST].spiclk_out);
|
||
|
||
for (int i= 0; i < 8; i++) {
|
||
//prepare slave tx data
|
||
slave_txdata_t slave_txdata = (slave_txdata_t) {
|
||
.start = slave_send,
|
||
.len = 256,
|
||
};
|
||
xQueueSend(slave_context->data_to_send, &slave_txdata, portMAX_DELAY);
|
||
|
||
vTaskDelay(50);
|
||
//prepare master tx data
|
||
int cmd_bits = (i+1)*2;
|
||
int addr_bits = 56-8*i;
|
||
int round_up = (cmd_bits+addr_bits+7)/8*8;
|
||
addr_bits = round_up - cmd_bits;
|
||
|
||
spi_transaction_ext_t trans = (spi_transaction_ext_t) {
|
||
.base = {
|
||
.flags = SPI_TRANS_VARIABLE_CMD | SPI_TRANS_VARIABLE_ADDR,
|
||
.addr = 0x456789abcdef0123,
|
||
.cmd = 0xcdef,
|
||
},
|
||
.command_bits = cmd_bits,
|
||
.address_bits = addr_bits,
|
||
};
|
||
|
||
ESP_LOGI( MASTER_TAG, "===== test%d =====", i );
|
||
ESP_LOGI(MASTER_TAG, "cmd_bits: %d, addr_bits: %d", cmd_bits, addr_bits);
|
||
TEST_ESP_OK(spi_device_transmit(spi, (spi_transaction_t*)&trans));
|
||
//wait for both master and slave end
|
||
|
||
size_t rcv_len;
|
||
slave_rxdata_t *rcv_data = xRingbufferReceive(slave_context->data_received, &rcv_len, portMAX_DELAY);
|
||
rcv_len-=8;
|
||
uint8_t *buffer = rcv_data->data;
|
||
|
||
ESP_LOGI(SLAVE_TAG, "trans_len: %d", rcv_len);
|
||
TEST_ASSERT_EQUAL(rcv_len, (rcv_data->len+7)/8);
|
||
TEST_ASSERT_EQUAL(rcv_data->len, cmd_bits+addr_bits);
|
||
ESP_LOG_BUFFER_HEX("slave rx", buffer, rcv_len);
|
||
|
||
uint16_t cmd_expected = trans.base.cmd & (BIT(cmd_bits) - 1);
|
||
uint64_t addr_expected = trans.base.addr & ((1ULL<<addr_bits) - 1);
|
||
|
||
uint8_t *data_ptr = buffer;
|
||
uint16_t cmd_got = *(uint16_t*)data_ptr;
|
||
data_ptr += cmd_bits/8;
|
||
cmd_got = __builtin_bswap16(cmd_got);
|
||
cmd_got = cmd_got >> (16-cmd_bits);
|
||
int remain_bits = cmd_bits % 8;
|
||
|
||
uint64_t addr_got = *(uint64_t*)data_ptr;
|
||
data_ptr += 8;
|
||
addr_got = __builtin_bswap64(addr_got);
|
||
addr_got = (addr_got << remain_bits);
|
||
addr_got |= (*data_ptr >> (8-remain_bits));
|
||
addr_got = addr_got >> (64-addr_bits);
|
||
|
||
if (lsb_first) {
|
||
cmd_got = __builtin_bswap16(cmd_got);
|
||
addr_got = __builtin_bswap64(addr_got);
|
||
|
||
uint8_t *swap_ptr = (uint8_t*)&cmd_got;
|
||
swap_ptr[0] = bitswap(swap_ptr[0]);
|
||
swap_ptr[1] = bitswap(swap_ptr[1]);
|
||
cmd_got = cmd_got >> (16-cmd_bits);
|
||
|
||
swap_ptr = (uint8_t*)&addr_got;
|
||
for (int j = 0; j < 8; j++) swap_ptr[j] = bitswap(swap_ptr[j]);
|
||
addr_got = addr_got >> (64-addr_bits);
|
||
}
|
||
|
||
ESP_LOGI(SLAVE_TAG, "cmd_got: %04X, addr_got: %08X%08X", cmd_got, (uint32_t)(addr_got>>32), (uint32_t)addr_got);
|
||
|
||
TEST_ASSERT_EQUAL_HEX16(cmd_expected, cmd_got);
|
||
if (addr_bits > 0) {
|
||
TEST_ASSERT_EQUAL_HEX32(addr_expected, addr_got);
|
||
TEST_ASSERT_EQUAL_HEX32(addr_expected >> 8, addr_got >> 8);
|
||
}
|
||
|
||
//clean
|
||
vRingbufferReturnItem(slave_context->data_received, buffer);
|
||
}
|
||
|
||
TEST_ASSERT(spi_bus_remove_device(spi) == ESP_OK);
|
||
TEST_ASSERT(spi_bus_free(TEST_SPI_HOST) == ESP_OK);
|
||
}
|
||
|
||
TEST_CASE("SPI master variable cmd & addr test","[spi]")
|
||
{
|
||
spi_slave_task_context_t slave_context = {};
|
||
esp_err_t err = init_slave_context( &slave_context );
|
||
TEST_ASSERT( err == ESP_OK );
|
||
TaskHandle_t handle_slave;
|
||
xTaskCreate( task_slave, "spi_slave", 4096, &slave_context, 0, &handle_slave);
|
||
|
||
//initial slave, mode 0, no dma
|
||
int dma_chan = 0;
|
||
int slave_mode = 0;
|
||
spi_bus_config_t slv_buscfg=SPI_BUS_TEST_DEFAULT_CONFIG();
|
||
spi_slave_interface_config_t slvcfg=SPI_SLAVE_TEST_DEFAULT_CONFIG();
|
||
slvcfg.mode = slave_mode;
|
||
//Initialize SPI slave interface
|
||
TEST_ESP_OK( spi_slave_initialize(TEST_SLAVE_HOST, &slv_buscfg, &slvcfg, dma_chan) );
|
||
|
||
test_cmd_addr(&slave_context, false);
|
||
test_cmd_addr(&slave_context, true);
|
||
|
||
vTaskDelete( handle_slave );
|
||
handle_slave = 0;
|
||
|
||
deinit_slave_context(&slave_context);
|
||
|
||
TEST_ASSERT(spi_slave_free(TEST_SLAVE_HOST) == ESP_OK);
|
||
|
||
ESP_LOGI(MASTER_TAG, "test passed.");
|
||
}
|
||
|
||
/********************************************************************************
|
||
* Test Timing By Internal Connections
|
||
********************************************************************************/
|
||
typedef enum {
|
||
FULL_DUPLEX = 0,
|
||
HALF_DUPLEX_MISO = 1,
|
||
HALF_DUPLEX_MOSI = 2,
|
||
} spi_dup_t;
|
||
|
||
static int timing_speed_array[]={/**/
|
||
SPI_MASTER_FREQ_8M ,
|
||
SPI_MASTER_FREQ_9M ,
|
||
SPI_MASTER_FREQ_10M,
|
||
SPI_MASTER_FREQ_11M,
|
||
SPI_MASTER_FREQ_13M,
|
||
SPI_MASTER_FREQ_16M,
|
||
SPI_MASTER_FREQ_20M,
|
||
SPI_MASTER_FREQ_26M,
|
||
SPI_MASTER_FREQ_40M,
|
||
SPI_MASTER_FREQ_80M,
|
||
};
|
||
|
||
typedef struct {
|
||
uint8_t master_rxbuf[320];
|
||
spi_transaction_t master_trans[16];
|
||
TaskHandle_t handle_slave;
|
||
spi_slave_task_context_t slave_context;
|
||
slave_txdata_t slave_trans[16];
|
||
} timing_context_t;
|
||
|
||
void master_print_data(spi_transaction_t *t, spi_dup_t dup)
|
||
{
|
||
if (t->tx_buffer) {
|
||
ESP_LOG_BUFFER_HEX( "master tx", t->tx_buffer, t->length/8 );
|
||
} else {
|
||
ESP_LOGI( "master tx", "no data" );
|
||
}
|
||
|
||
int rxlength;
|
||
if (dup!=HALF_DUPLEX_MISO) {
|
||
rxlength = t->length/8;
|
||
} else {
|
||
rxlength = t->rxlength/8;
|
||
}
|
||
if (t->rx_buffer) {
|
||
ESP_LOG_BUFFER_HEX( "master rx", t->rx_buffer, rxlength );
|
||
} else {
|
||
ESP_LOGI( "master rx", "no data" );
|
||
}
|
||
}
|
||
|
||
void slave_print_data(slave_rxdata_t *t)
|
||
{
|
||
int rcv_len = (t->len+7)/8;
|
||
ESP_LOGI(SLAVE_TAG, "trans_len: %d", t->len);
|
||
ESP_LOG_BUFFER_HEX( "slave tx", t->tx_start, rcv_len);
|
||
ESP_LOG_BUFFER_HEX( "slave rx", t->data, rcv_len);
|
||
}
|
||
|
||
esp_err_t check_data(spi_transaction_t *t, spi_dup_t dup, slave_rxdata_t *slave_t)
|
||
{
|
||
int length;
|
||
if (dup!=HALF_DUPLEX_MISO) {
|
||
length = t->length;
|
||
} else {
|
||
length = t->rxlength;
|
||
}
|
||
TEST_ASSERT(length!=0);
|
||
|
||
//currently the rcv_len can be in range of [t->length-1, t->length+3]
|
||
uint32_t rcv_len = slave_t->len;
|
||
TEST_ASSERT(rcv_len >= length-1 && rcv_len <= length+3);
|
||
|
||
//the timing speed is temporarily only for master
|
||
if (dup!=HALF_DUPLEX_MISO) {
|
||
// TEST_ASSERT_EQUAL_HEX8_ARRAY(t->tx_buffer, slave_t->data, (t->length+7)/8);
|
||
}
|
||
if (dup!=HALF_DUPLEX_MOSI) {
|
||
TEST_ASSERT_EQUAL_HEX8_ARRAY(slave_t->tx_start, t->rx_buffer, (length+7)/8);
|
||
}
|
||
return ESP_OK;
|
||
}
|
||
|
||
static void timing_init_transactions(spi_dup_t dup, timing_context_t* context)
|
||
{
|
||
spi_transaction_t* trans = context->master_trans;
|
||
uint8_t *rx_buf_ptr = context->master_rxbuf;
|
||
if (dup==HALF_DUPLEX_MISO) {
|
||
for (int i = 0; i < 8; i++ ) {
|
||
trans[i] = (spi_transaction_t) {
|
||
.flags = 0,
|
||
.rxlength = 8*(i*2+1),
|
||
.rx_buffer = rx_buf_ptr,
|
||
};
|
||
rx_buf_ptr += ((context->master_trans[i].rxlength + 31)/8)&(~3);
|
||
}
|
||
} else if (dup==HALF_DUPLEX_MOSI) {
|
||
for (int i = 0; i < 8; i++ ) {
|
||
trans[i] = (spi_transaction_t) {
|
||
.flags = 0,
|
||
.length = 8*(i*2+1),
|
||
.tx_buffer = master_send+i,
|
||
};
|
||
}
|
||
} else {
|
||
for (int i = 0; i < 8; i++ ) {
|
||
trans[i] = (spi_transaction_t) {
|
||
.flags = 0,
|
||
.length = 8*(i*2+1),
|
||
.tx_buffer = master_send+i,
|
||
.rx_buffer = rx_buf_ptr,
|
||
};
|
||
rx_buf_ptr += ((context->master_trans[i].length + 31)/8)&(~3);
|
||
}
|
||
}
|
||
//prepare slave tx data
|
||
for (int i = 0; i < 8; i ++) {
|
||
context->slave_trans[i] = (slave_txdata_t) {
|
||
.start = slave_send + 4*(i%3),
|
||
.len = 256,
|
||
};
|
||
}
|
||
}
|
||
|
||
typedef struct {
|
||
const char cfg_name[30];
|
||
/*The test work till the frequency below,
|
||
*set the frequency to higher and remove checks in the driver to know how fast the system can run.
|
||
*/
|
||
int freq_limit;
|
||
spi_dup_t dup;
|
||
bool master_iomux;
|
||
bool slave_iomux;
|
||
int slave_tv_ns;
|
||
} test_timing_config_t;
|
||
|
||
#define ESP_SPI_SLAVE_TV (12.5*3)
|
||
#define GPIO_DELAY (12.5*2)
|
||
#define SAMPLE_DELAY 12.5
|
||
|
||
#define TV_INT_CONNECT_GPIO (ESP_SPI_SLAVE_TV+GPIO_DELAY)
|
||
#define TV_INT_CONNECT (ESP_SPI_SLAVE_TV)
|
||
#define TV_WITH_ESP_SLAVE_GPIO (ESP_SPI_SLAVE_TV+SAMPLE_DELAY+GPIO_DELAY)
|
||
#define TV_WITH_ESP_SLAVE (ESP_SPI_SLAVE_TV+SAMPLE_DELAY)
|
||
|
||
//currently ESP32 slave only supports up to 20MHz, but 40MHz on the same board
|
||
#define ESP_SPI_SLAVE_MAX_FREQ SPI_MASTER_FREQ_20M
|
||
#define ESP_SPI_SLAVE_MAX_FREQ_SYNC SPI_MASTER_FREQ_40M
|
||
|
||
|
||
static test_timing_config_t timing_master_conf_t[] = {/**/
|
||
{ .cfg_name = "FULL_DUP, MASTER IOMUX",
|
||
.freq_limit = SPI_MASTER_FREQ_13M,
|
||
.dup = FULL_DUPLEX,
|
||
.master_iomux = true,
|
||
.slave_iomux = false,
|
||
.slave_tv_ns = TV_INT_CONNECT_GPIO,
|
||
},
|
||
{ .cfg_name = "FULL_DUP, SLAVE IOMUX",
|
||
.freq_limit = SPI_MASTER_FREQ_13M,
|
||
.dup = FULL_DUPLEX,
|
||
.master_iomux = false,
|
||
.slave_iomux = true,
|
||
.slave_tv_ns = TV_INT_CONNECT,
|
||
},
|
||
{ .cfg_name = "FULL_DUP, BOTH GPIO",
|
||
.freq_limit = SPI_MASTER_FREQ_10M,
|
||
.dup = FULL_DUPLEX,
|
||
.master_iomux = false,
|
||
.slave_iomux = false,
|
||
.slave_tv_ns = TV_INT_CONNECT_GPIO,
|
||
},
|
||
{ .cfg_name = "HALF_DUP, MASTER IOMUX",
|
||
.freq_limit = ESP_SPI_SLAVE_MAX_FREQ_SYNC,
|
||
.dup = HALF_DUPLEX_MISO,
|
||
.master_iomux = true,
|
||
.slave_iomux = false,
|
||
.slave_tv_ns = TV_INT_CONNECT_GPIO,
|
||
},
|
||
{ .cfg_name = "HALF_DUP, SLAVE IOMUX",
|
||
.freq_limit = ESP_SPI_SLAVE_MAX_FREQ_SYNC,
|
||
.dup = HALF_DUPLEX_MISO,
|
||
.master_iomux = false,
|
||
.slave_iomux = true,
|
||
.slave_tv_ns = TV_INT_CONNECT,
|
||
},
|
||
{ .cfg_name = "HALF_DUP, BOTH GPIO",
|
||
.freq_limit = ESP_SPI_SLAVE_MAX_FREQ_SYNC,
|
||
.dup = HALF_DUPLEX_MISO,
|
||
.master_iomux = false,
|
||
.slave_iomux = false,
|
||
.slave_tv_ns = TV_INT_CONNECT_GPIO,
|
||
},
|
||
{ .cfg_name = "MOSI_DUP, MASTER IOMUX",
|
||
.freq_limit = ESP_SPI_SLAVE_MAX_FREQ_SYNC,
|
||
.dup = HALF_DUPLEX_MOSI,
|
||
.master_iomux = true,
|
||
.slave_iomux = false,
|
||
.slave_tv_ns = TV_INT_CONNECT_GPIO,
|
||
},
|
||
{ .cfg_name = "MOSI_DUP, SLAVE IOMUX",
|
||
.freq_limit = ESP_SPI_SLAVE_MAX_FREQ_SYNC,
|
||
.dup = HALF_DUPLEX_MOSI,
|
||
.master_iomux = false,
|
||
.slave_iomux = true,
|
||
.slave_tv_ns = TV_INT_CONNECT,
|
||
},
|
||
{ .cfg_name = "MOSI_DUP, BOTH GPIO",
|
||
.freq_limit = ESP_SPI_SLAVE_MAX_FREQ_SYNC,
|
||
.dup = HALF_DUPLEX_MOSI,
|
||
.master_iomux = false,
|
||
.slave_iomux = false,
|
||
.slave_tv_ns = TV_INT_CONNECT_GPIO,
|
||
},
|
||
};
|
||
|
||
//this case currently only checks master read
|
||
TEST_CASE("test timing_master","[spi][timeout=120]")
|
||
{
|
||
timing_context_t context;
|
||
|
||
//Enable pull-ups on SPI lines so we don't detect rogue pulses when no master is connected.
|
||
//slave_pull_up(&slv_buscfg, slvcfg.spics_io_num);
|
||
|
||
context.slave_context = (spi_slave_task_context_t){};
|
||
esp_err_t err = init_slave_context( &context.slave_context );
|
||
TEST_ASSERT( err == ESP_OK );
|
||
|
||
xTaskCreate( task_slave, "spi_slave", 4096, &context.slave_context, 0, &context.handle_slave);
|
||
|
||
const int test_size = sizeof(timing_master_conf_t)/sizeof(test_timing_config_t);
|
||
for (int i = 0; i < test_size; i++) {
|
||
test_timing_config_t* conf = &timing_master_conf_t[i];
|
||
|
||
spi_device_handle_t spi;
|
||
|
||
timing_init_transactions(conf->dup, &context);
|
||
|
||
ESP_LOGI(MASTER_TAG, "****************** %s ***************", conf->cfg_name);
|
||
for (int j=0; j<sizeof(timing_speed_array)/sizeof(int); j++ ) {
|
||
if (timing_speed_array[j] > conf->freq_limit) break;
|
||
ESP_LOGI(MASTER_TAG, "======> %dk", timing_speed_array[j]/1000);
|
||
|
||
//master config
|
||
const int master_mode = 0;
|
||
spi_bus_config_t buscfg=SPI_BUS_TEST_DEFAULT_CONFIG();
|
||
spi_device_interface_config_t devcfg=SPI_DEVICE_TEST_DEFAULT_CONFIG();
|
||
devcfg.mode = master_mode;
|
||
if (conf->dup==HALF_DUPLEX_MISO||conf->dup==HALF_DUPLEX_MOSI) {
|
||
devcfg.cs_ena_pretrans = 20;
|
||
devcfg.flags |= SPI_DEVICE_HALFDUPLEX;
|
||
} else {
|
||
devcfg.cs_ena_pretrans = 1;
|
||
}
|
||
devcfg.cs_ena_posttrans = 20;
|
||
devcfg.input_delay_ns = conf->slave_tv_ns;
|
||
devcfg.clock_speed_hz = timing_speed_array[j];
|
||
|
||
//slave config
|
||
int slave_mode = 0;
|
||
spi_slave_interface_config_t slvcfg=SPI_SLAVE_TEST_DEFAULT_CONFIG();
|
||
slvcfg.mode = slave_mode;
|
||
|
||
//pin config & initialize
|
||
//we can't have two sets of iomux pins on the same pins
|
||
assert(!conf->master_iomux || !conf->slave_iomux);
|
||
if (conf->slave_iomux) {
|
||
//only in this case, use VSPI iomux pins
|
||
buscfg.miso_io_num = VSPI_IOMUX_PIN_NUM_MISO;
|
||
buscfg.mosi_io_num = VSPI_IOMUX_PIN_NUM_MOSI;
|
||
buscfg.sclk_io_num = VSPI_IOMUX_PIN_NUM_CLK;
|
||
devcfg.spics_io_num = VSPI_IOMUX_PIN_NUM_CS;
|
||
slvcfg.spics_io_num = VSPI_IOMUX_PIN_NUM_CS;
|
||
} else {
|
||
buscfg.miso_io_num = HSPI_IOMUX_PIN_NUM_MISO;
|
||
buscfg.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI;
|
||
buscfg.sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK;
|
||
devcfg.spics_io_num = HSPI_IOMUX_PIN_NUM_CS;
|
||
slvcfg.spics_io_num = HSPI_IOMUX_PIN_NUM_CS;
|
||
}
|
||
slave_pull_up(&buscfg, slvcfg.spics_io_num);
|
||
|
||
//this does nothing, but avoid the driver from using iomux pins if required
|
||
buscfg.quadhd_io_num = (!conf->master_iomux && !conf->slave_iomux? VSPI_IOMUX_PIN_NUM_MISO: -1);
|
||
TEST_ESP_OK(spi_bus_initialize(HSPI_HOST, &buscfg, 0));
|
||
TEST_ESP_OK(spi_bus_add_device(HSPI_HOST, &devcfg, &spi));
|
||
//slave automatically use iomux pins if pins are on VSPI_* pins
|
||
buscfg.quadhd_io_num = -1;
|
||
TEST_ESP_OK( spi_slave_initialize(VSPI_HOST, &buscfg, &slvcfg, 0) );
|
||
|
||
//initialize master and slave on the same pins break some of the output configs, fix them
|
||
if (conf->master_iomux) {
|
||
gpio_output_sel(buscfg.mosi_io_num, FUNC_SPI, HSPID_OUT_IDX);
|
||
gpio_output_sel(buscfg.miso_io_num, FUNC_GPIO, VSPIQ_OUT_IDX);
|
||
gpio_output_sel(devcfg.spics_io_num, FUNC_SPI, HSPICS0_OUT_IDX);
|
||
gpio_output_sel(buscfg.sclk_io_num, FUNC_SPI, HSPICLK_OUT_IDX);
|
||
} else if (conf->slave_iomux) {
|
||
gpio_output_sel(buscfg.mosi_io_num, FUNC_GPIO, HSPID_OUT_IDX);
|
||
gpio_output_sel(buscfg.miso_io_num, FUNC_SPI, VSPIQ_OUT_IDX);
|
||
gpio_output_sel(devcfg.spics_io_num, FUNC_GPIO, HSPICS0_OUT_IDX);
|
||
gpio_output_sel(buscfg.sclk_io_num, FUNC_GPIO, HSPICLK_OUT_IDX);
|
||
} else {
|
||
gpio_output_sel(buscfg.mosi_io_num, FUNC_GPIO, HSPID_OUT_IDX);
|
||
gpio_output_sel(buscfg.miso_io_num, FUNC_GPIO, VSPIQ_OUT_IDX);
|
||
gpio_output_sel(devcfg.spics_io_num, FUNC_GPIO, HSPICS0_OUT_IDX);
|
||
gpio_output_sel(buscfg.sclk_io_num, FUNC_GPIO, HSPICLK_OUT_IDX);
|
||
}
|
||
|
||
//clear master receive buffer
|
||
memset(context.master_rxbuf, 0x66, sizeof(context.master_rxbuf));
|
||
|
||
//prepare slave tx data
|
||
for (int k = 0; k < 8; k ++) xQueueSend( context.slave_context.data_to_send, &context.slave_trans[k], portMAX_DELAY );
|
||
|
||
for( int k= 0; k < 8; k ++ ) {
|
||
//wait for both master and slave end
|
||
ESP_LOGI( MASTER_TAG, "=> test%d", k );
|
||
//send master tx data
|
||
vTaskDelay(9);
|
||
|
||
spi_transaction_t *t = &context.master_trans[k];
|
||
TEST_ESP_OK (spi_device_transmit( spi, t) );
|
||
master_print_data(t, conf->dup);
|
||
|
||
size_t rcv_len;
|
||
slave_rxdata_t *rcv_data = xRingbufferReceive( context.slave_context.data_received, &rcv_len, portMAX_DELAY );
|
||
slave_print_data(rcv_data);
|
||
|
||
//check result
|
||
TEST_ESP_OK(check_data(t, conf->dup, rcv_data));
|
||
//clean
|
||
vRingbufferReturnItem(context.slave_context.data_received, rcv_data);
|
||
}
|
||
master_deinit(spi);
|
||
TEST_ASSERT(spi_slave_free(VSPI_HOST) == ESP_OK);
|
||
}
|
||
}
|
||
|
||
vTaskDelete( context.handle_slave );
|
||
context.handle_slave = 0;
|
||
|
||
deinit_slave_context(&context.slave_context);
|
||
|
||
ESP_LOGI(MASTER_TAG, "test passed.");
|
||
}
|
||
|
||
/********************************************************************************
|
||
* Test SPI transaction interval
|
||
********************************************************************************/
|
||
#define RECORD_TIME_PREPARE() uint32_t __t1, __t2
|
||
#define RECORD_TIME_START() do {__t1 = xthal_get_ccount();}while(0)
|
||
#define RECORD_TIME_END(p_time) do{__t2 = xthal_get_ccount(); *p_time = (__t2-__t1)/240;}while(0)
|
||
|
||
static void speed_setup(spi_device_handle_t* spi, bool use_dma)
|
||
{
|
||
esp_err_t ret;
|
||
spi_bus_config_t buscfg=SPI_BUS_TEST_DEFAULT_CONFIG();
|
||
spi_device_interface_config_t devcfg=SPI_DEVICE_TEST_DEFAULT_CONFIG();
|
||
devcfg.queue_size=8; //We want to be able to queue 7 transactions at a time
|
||
|
||
//Initialize the SPI bus and the device to test
|
||
ret=spi_bus_initialize(HSPI_HOST, &buscfg, (use_dma?1:0));
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
ret=spi_bus_add_device(HSPI_HOST, &devcfg, spi);
|
||
TEST_ASSERT(ret==ESP_OK);
|
||
}
|
||
|
||
static void speed_deinit(spi_device_handle_t spi)
|
||
{
|
||
TEST_ESP_OK( spi_bus_remove_device(spi) );
|
||
TEST_ESP_OK( spi_bus_free(HSPI_HOST) );
|
||
}
|
||
|
||
static void sorted_array_insert(uint32_t* array, int* size, uint32_t item)
|
||
{
|
||
int pos;
|
||
for (pos = *size; pos>0; pos--) {
|
||
if (array[pos-1] < item) break;
|
||
array[pos] = array[pos-1];
|
||
}
|
||
array[pos]=item;
|
||
(*size)++;
|
||
}
|
||
|
||
#define TEST_TIMES 11
|
||
|
||
TEST_CASE("spi_speed","[spi]")
|
||
{
|
||
RECORD_TIME_PREPARE();
|
||
uint32_t t_flight;
|
||
//to get rid of the influence of randomly interrupts, we measured the performance by median value
|
||
uint32_t t_flight_sorted[TEST_TIMES];
|
||
int t_flight_num = 0;
|
||
|
||
spi_device_handle_t spi;
|
||
const bool use_dma = true;
|
||
WORD_ALIGNED_ATTR spi_transaction_t trans = {
|
||
.length = 1*8,
|
||
.flags = SPI_TRANS_USE_TXDATA,
|
||
};
|
||
|
||
//first work with DMA
|
||
speed_setup(&spi, use_dma);
|
||
|
||
//first time introduces a device switch, which costs more time. we skip this
|
||
spi_device_transmit(spi, &trans);
|
||
|
||
//record flight time by isr, with DMA
|
||
t_flight_num = 0;
|
||
for (int i = 0; i < TEST_TIMES; i++) {
|
||
spi_device_transmit(spi, &trans); // prime the flash cache
|
||
RECORD_TIME_START();
|
||
spi_device_transmit(spi, &trans);
|
||
RECORD_TIME_END(&t_flight);
|
||
sorted_array_insert(t_flight_sorted, &t_flight_num, t_flight);
|
||
}
|
||
TEST_PERFORMANCE_LESS_THAN(SPI_PER_TRANS_NO_POLLING, "%d us", t_flight_sorted[(TEST_TIMES+1)/2]);
|
||
for (int i = 0; i < TEST_TIMES; i++) {
|
||
ESP_LOGI(TAG, "%d", t_flight_sorted[i]);
|
||
}
|
||
|
||
speed_deinit(spi);
|
||
speed_setup(&spi, !use_dma);
|
||
|
||
//first time introduces a device switch, which costs more time. we skip this
|
||
spi_device_transmit(spi, &trans);
|
||
|
||
//record flight time by isr, without DMA
|
||
t_flight_num = 0;
|
||
for (int i = 0; i < TEST_TIMES; i++) {
|
||
RECORD_TIME_START();
|
||
spi_device_transmit(spi, &trans);
|
||
RECORD_TIME_END(&t_flight);
|
||
sorted_array_insert(t_flight_sorted, &t_flight_num, t_flight);
|
||
}
|
||
TEST_PERFORMANCE_LESS_THAN( SPI_PER_TRANS_NO_POLLING_NO_DMA, "%d us", t_flight_sorted[(TEST_TIMES+1)/2]);
|
||
for (int i = 0; i < TEST_TIMES; i++) {
|
||
ESP_LOGI(TAG, "%d", t_flight_sorted[i]);
|
||
}
|
||
speed_deinit(spi);
|
||
}
|
||
|