1047 lines
47 KiB
C
1047 lines
47 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#ifndef _SOC_SENS_REG_H_
|
|
#define _SOC_SENS_REG_H_
|
|
|
|
|
|
#include "soc.h"
|
|
#define SENS_SAR_READ_CTRL_REG (DR_REG_SENS_BASE + 0x0000)
|
|
/* SENS_SAR1_DATA_INV : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: Invert SAR ADC1 data*/
|
|
#define SENS_SAR1_DATA_INV (BIT(28))
|
|
#define SENS_SAR1_DATA_INV_M (BIT(28))
|
|
#define SENS_SAR1_DATA_INV_V 0x1
|
|
#define SENS_SAR1_DATA_INV_S 28
|
|
/* SENS_SAR1_DIG_FORCE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: 1: SAR ADC1 controlled by DIG ADC1 CTRL 0: SAR ADC1 controlled by RTC ADC1 CTRL*/
|
|
#define SENS_SAR1_DIG_FORCE (BIT(27))
|
|
#define SENS_SAR1_DIG_FORCE_M (BIT(27))
|
|
#define SENS_SAR1_DIG_FORCE_V 0x1
|
|
#define SENS_SAR1_DIG_FORCE_S 27
|
|
/* SENS_SAR1_SAMPLE_NUM : R/W ;bitpos:[26:19] ;default: 8'd0 ; */
|
|
/*description: */
|
|
#define SENS_SAR1_SAMPLE_NUM 0x000000FF
|
|
#define SENS_SAR1_SAMPLE_NUM_M ((SENS_SAR1_SAMPLE_NUM_V)<<(SENS_SAR1_SAMPLE_NUM_S))
|
|
#define SENS_SAR1_SAMPLE_NUM_V 0xFF
|
|
#define SENS_SAR1_SAMPLE_NUM_S 19
|
|
/* SENS_SAR1_CLK_GATED : R/W ;bitpos:[18] ;default: 1'b1 ; */
|
|
/*description: */
|
|
#define SENS_SAR1_CLK_GATED (BIT(18))
|
|
#define SENS_SAR1_CLK_GATED_M (BIT(18))
|
|
#define SENS_SAR1_CLK_GATED_V 0x1
|
|
#define SENS_SAR1_CLK_GATED_S 18
|
|
/* SENS_SAR1_SAMPLE_BIT : R/W ;bitpos:[17:16] ;default: 2'd3 ; */
|
|
/*description: 00: for 9-bit width 01: for 10-bit width 10: for 11-bit width
|
|
11: for 12-bit width*/
|
|
#define SENS_SAR1_SAMPLE_BIT 0x00000003
|
|
#define SENS_SAR1_SAMPLE_BIT_M ((SENS_SAR1_SAMPLE_BIT_V)<<(SENS_SAR1_SAMPLE_BIT_S))
|
|
#define SENS_SAR1_SAMPLE_BIT_V 0x3
|
|
#define SENS_SAR1_SAMPLE_BIT_S 16
|
|
/* SENS_SAR1_SAMPLE_CYCLE : R/W ;bitpos:[15:8] ;default: 8'd9 ; */
|
|
/*description: sample cycles for SAR ADC1*/
|
|
#define SENS_SAR1_SAMPLE_CYCLE 0x000000FF
|
|
#define SENS_SAR1_SAMPLE_CYCLE_M ((SENS_SAR1_SAMPLE_CYCLE_V)<<(SENS_SAR1_SAMPLE_CYCLE_S))
|
|
#define SENS_SAR1_SAMPLE_CYCLE_V 0xFF
|
|
#define SENS_SAR1_SAMPLE_CYCLE_S 8
|
|
/* SENS_SAR1_CLK_DIV : R/W ;bitpos:[7:0] ;default: 8'd2 ; */
|
|
/*description: clock divider*/
|
|
#define SENS_SAR1_CLK_DIV 0x000000FF
|
|
#define SENS_SAR1_CLK_DIV_M ((SENS_SAR1_CLK_DIV_V)<<(SENS_SAR1_CLK_DIV_S))
|
|
#define SENS_SAR1_CLK_DIV_V 0xFF
|
|
#define SENS_SAR1_CLK_DIV_S 0
|
|
|
|
#define SENS_SAR_READ_STATUS1_REG (DR_REG_SENS_BASE + 0x0004)
|
|
/* SENS_SAR1_READER_STATUS : RO ;bitpos:[31:0] ;default: 32'h0 ; */
|
|
/*description: */
|
|
#define SENS_SAR1_READER_STATUS 0xFFFFFFFF
|
|
#define SENS_SAR1_READER_STATUS_M ((SENS_SAR1_READER_STATUS_V)<<(SENS_SAR1_READER_STATUS_S))
|
|
#define SENS_SAR1_READER_STATUS_V 0xFFFFFFFF
|
|
#define SENS_SAR1_READER_STATUS_S 0
|
|
|
|
#define SENS_SAR_MEAS_WAIT1_REG (DR_REG_SENS_BASE + 0x0008)
|
|
/* SENS_SAR_AMP_WAIT2 : R/W ;bitpos:[31:16] ;default: 16'd10 ; */
|
|
/*description: */
|
|
#define SENS_SAR_AMP_WAIT2 0x0000FFFF
|
|
#define SENS_SAR_AMP_WAIT2_M ((SENS_SAR_AMP_WAIT2_V)<<(SENS_SAR_AMP_WAIT2_S))
|
|
#define SENS_SAR_AMP_WAIT2_V 0xFFFF
|
|
#define SENS_SAR_AMP_WAIT2_S 16
|
|
/* SENS_SAR_AMP_WAIT1 : R/W ;bitpos:[15:0] ;default: 16'd10 ; */
|
|
/*description: */
|
|
#define SENS_SAR_AMP_WAIT1 0x0000FFFF
|
|
#define SENS_SAR_AMP_WAIT1_M ((SENS_SAR_AMP_WAIT1_V)<<(SENS_SAR_AMP_WAIT1_S))
|
|
#define SENS_SAR_AMP_WAIT1_V 0xFFFF
|
|
#define SENS_SAR_AMP_WAIT1_S 0
|
|
|
|
#define SENS_SAR_MEAS_WAIT2_REG (DR_REG_SENS_BASE + 0x000c)
|
|
/* SENS_SAR2_RSTB_WAIT : R/W ;bitpos:[27:20] ;default: 8'd2 ; */
|
|
/*description: */
|
|
#define SENS_SAR2_RSTB_WAIT 0x000000FF
|
|
#define SENS_SAR2_RSTB_WAIT_M ((SENS_SAR2_RSTB_WAIT_V)<<(SENS_SAR2_RSTB_WAIT_S))
|
|
#define SENS_SAR2_RSTB_WAIT_V 0xFF
|
|
#define SENS_SAR2_RSTB_WAIT_S 20
|
|
/* SENS_FORCE_XPD_SAR : R/W ;bitpos:[19:18] ;default: 2'd0 ; */
|
|
/*description: */
|
|
#define SENS_FORCE_XPD_SAR 0x00000003
|
|
#define SENS_FORCE_XPD_SAR_M ((SENS_FORCE_XPD_SAR_V)<<(SENS_FORCE_XPD_SAR_S))
|
|
#define SENS_FORCE_XPD_SAR_V 0x3
|
|
#define SENS_FORCE_XPD_SAR_S 18
|
|
/* SENS_FORCE_XPD_AMP : R/W ;bitpos:[17:16] ;default: 2'd0 ; */
|
|
/*description: */
|
|
#define SENS_FORCE_XPD_AMP 0x00000003
|
|
#define SENS_FORCE_XPD_AMP_M ((SENS_FORCE_XPD_AMP_V)<<(SENS_FORCE_XPD_AMP_S))
|
|
#define SENS_FORCE_XPD_AMP_V 0x3
|
|
#define SENS_FORCE_XPD_AMP_S 16
|
|
/* SENS_SAR_AMP_WAIT3 : R/W ;bitpos:[15:0] ;default: 16'd10 ; */
|
|
/*description: */
|
|
#define SENS_SAR_AMP_WAIT3 0x0000FFFF
|
|
#define SENS_SAR_AMP_WAIT3_M ((SENS_SAR_AMP_WAIT3_V)<<(SENS_SAR_AMP_WAIT3_S))
|
|
#define SENS_SAR_AMP_WAIT3_V 0xFFFF
|
|
#define SENS_SAR_AMP_WAIT3_S 0
|
|
|
|
#define SENS_SAR_MEAS_CTRL_REG (DR_REG_SENS_BASE + 0x0010)
|
|
/* SENS_SAR2_XPD_WAIT : R/W ;bitpos:[31:24] ;default: 8'h7 ; */
|
|
/*description: */
|
|
#define SENS_SAR2_XPD_WAIT 0x000000FF
|
|
#define SENS_SAR2_XPD_WAIT_M ((SENS_SAR2_XPD_WAIT_V)<<(SENS_SAR2_XPD_WAIT_S))
|
|
#define SENS_SAR2_XPD_WAIT_V 0xFF
|
|
#define SENS_SAR2_XPD_WAIT_S 24
|
|
/* SENS_SAR_RSTB_FSM : R/W ;bitpos:[23:20] ;default: 4'b0000 ; */
|
|
/*description: */
|
|
#define SENS_SAR_RSTB_FSM 0x0000000F
|
|
#define SENS_SAR_RSTB_FSM_M ((SENS_SAR_RSTB_FSM_V)<<(SENS_SAR_RSTB_FSM_S))
|
|
#define SENS_SAR_RSTB_FSM_V 0xF
|
|
#define SENS_SAR_RSTB_FSM_S 20
|
|
/* SENS_XPD_SAR_FSM : R/W ;bitpos:[19:16] ;default: 4'b0111 ; */
|
|
/*description: */
|
|
#define SENS_XPD_SAR_FSM 0x0000000F
|
|
#define SENS_XPD_SAR_FSM_M ((SENS_XPD_SAR_FSM_V)<<(SENS_XPD_SAR_FSM_S))
|
|
#define SENS_XPD_SAR_FSM_V 0xF
|
|
#define SENS_XPD_SAR_FSM_S 16
|
|
/* SENS_AMP_SHORT_REF_GND_FSM : R/W ;bitpos:[15:12] ;default: 4'b0011 ; */
|
|
/*description: */
|
|
#define SENS_AMP_SHORT_REF_GND_FSM 0x0000000F
|
|
#define SENS_AMP_SHORT_REF_GND_FSM_M ((SENS_AMP_SHORT_REF_GND_FSM_V)<<(SENS_AMP_SHORT_REF_GND_FSM_S))
|
|
#define SENS_AMP_SHORT_REF_GND_FSM_V 0xF
|
|
#define SENS_AMP_SHORT_REF_GND_FSM_S 12
|
|
/* SENS_AMP_SHORT_REF_FSM : R/W ;bitpos:[11:8] ;default: 4'b0011 ; */
|
|
/*description: */
|
|
#define SENS_AMP_SHORT_REF_FSM 0x0000000F
|
|
#define SENS_AMP_SHORT_REF_FSM_M ((SENS_AMP_SHORT_REF_FSM_V)<<(SENS_AMP_SHORT_REF_FSM_S))
|
|
#define SENS_AMP_SHORT_REF_FSM_V 0xF
|
|
#define SENS_AMP_SHORT_REF_FSM_S 8
|
|
/* SENS_AMP_RST_FB_FSM : R/W ;bitpos:[7:4] ;default: 4'b1000 ; */
|
|
/*description: */
|
|
#define SENS_AMP_RST_FB_FSM 0x0000000F
|
|
#define SENS_AMP_RST_FB_FSM_M ((SENS_AMP_RST_FB_FSM_V)<<(SENS_AMP_RST_FB_FSM_S))
|
|
#define SENS_AMP_RST_FB_FSM_V 0xF
|
|
#define SENS_AMP_RST_FB_FSM_S 4
|
|
/* SENS_XPD_SAR_AMP_FSM : R/W ;bitpos:[3:0] ;default: 4'b1111 ; */
|
|
/*description: */
|
|
#define SENS_XPD_SAR_AMP_FSM 0x0000000F
|
|
#define SENS_XPD_SAR_AMP_FSM_M ((SENS_XPD_SAR_AMP_FSM_V)<<(SENS_XPD_SAR_AMP_FSM_S))
|
|
#define SENS_XPD_SAR_AMP_FSM_V 0xF
|
|
#define SENS_XPD_SAR_AMP_FSM_S 0
|
|
|
|
#define SENS_SAR_READ_STATUS2_REG (DR_REG_SENS_BASE + 0x0014)
|
|
/* SENS_SAR2_READER_STATUS : RO ;bitpos:[31:0] ;default: 32'h0 ; */
|
|
/*description: */
|
|
#define SENS_SAR2_READER_STATUS 0xFFFFFFFF
|
|
#define SENS_SAR2_READER_STATUS_M ((SENS_SAR2_READER_STATUS_V)<<(SENS_SAR2_READER_STATUS_S))
|
|
#define SENS_SAR2_READER_STATUS_V 0xFFFFFFFF
|
|
#define SENS_SAR2_READER_STATUS_S 0
|
|
|
|
#define SENS_ULP_CP_SLEEP_CYC0_REG (DR_REG_SENS_BASE + 0x0018)
|
|
/* SENS_SLEEP_CYCLES_S0 : R/W ;bitpos:[31:0] ;default: 32'd200 ; */
|
|
/*description: sleep cycles for ULP-coprocessor timer*/
|
|
#define SENS_SLEEP_CYCLES_S0 0xFFFFFFFF
|
|
#define SENS_SLEEP_CYCLES_S0_M ((SENS_SLEEP_CYCLES_S0_V)<<(SENS_SLEEP_CYCLES_S0_S))
|
|
#define SENS_SLEEP_CYCLES_S0_V 0xFFFFFFFF
|
|
#define SENS_SLEEP_CYCLES_S0_S 0
|
|
|
|
#define SENS_ULP_CP_SLEEP_CYC1_REG (DR_REG_SENS_BASE + 0x001c)
|
|
/* SENS_SLEEP_CYCLES_S1 : R/W ;bitpos:[31:0] ;default: 32'd100 ; */
|
|
/*description: */
|
|
#define SENS_SLEEP_CYCLES_S1 0xFFFFFFFF
|
|
#define SENS_SLEEP_CYCLES_S1_M ((SENS_SLEEP_CYCLES_S1_V)<<(SENS_SLEEP_CYCLES_S1_S))
|
|
#define SENS_SLEEP_CYCLES_S1_V 0xFFFFFFFF
|
|
#define SENS_SLEEP_CYCLES_S1_S 0
|
|
|
|
#define SENS_ULP_CP_SLEEP_CYC2_REG (DR_REG_SENS_BASE + 0x0020)
|
|
/* SENS_SLEEP_CYCLES_S2 : R/W ;bitpos:[31:0] ;default: 32'd50 ; */
|
|
/*description: */
|
|
#define SENS_SLEEP_CYCLES_S2 0xFFFFFFFF
|
|
#define SENS_SLEEP_CYCLES_S2_M ((SENS_SLEEP_CYCLES_S2_V)<<(SENS_SLEEP_CYCLES_S2_S))
|
|
#define SENS_SLEEP_CYCLES_S2_V 0xFFFFFFFF
|
|
#define SENS_SLEEP_CYCLES_S2_S 0
|
|
|
|
#define SENS_ULP_CP_SLEEP_CYC3_REG (DR_REG_SENS_BASE + 0x0024)
|
|
/* SENS_SLEEP_CYCLES_S3 : R/W ;bitpos:[31:0] ;default: 32'd40 ; */
|
|
/*description: */
|
|
#define SENS_SLEEP_CYCLES_S3 0xFFFFFFFF
|
|
#define SENS_SLEEP_CYCLES_S3_M ((SENS_SLEEP_CYCLES_S3_V)<<(SENS_SLEEP_CYCLES_S3_S))
|
|
#define SENS_SLEEP_CYCLES_S3_V 0xFFFFFFFF
|
|
#define SENS_SLEEP_CYCLES_S3_S 0
|
|
|
|
#define SENS_ULP_CP_SLEEP_CYC4_REG (DR_REG_SENS_BASE + 0x0028)
|
|
/* SENS_SLEEP_CYCLES_S4 : R/W ;bitpos:[31:0] ;default: 32'd20 ; */
|
|
/*description: */
|
|
#define SENS_SLEEP_CYCLES_S4 0xFFFFFFFF
|
|
#define SENS_SLEEP_CYCLES_S4_M ((SENS_SLEEP_CYCLES_S4_V)<<(SENS_SLEEP_CYCLES_S4_S))
|
|
#define SENS_SLEEP_CYCLES_S4_V 0xFFFFFFFF
|
|
#define SENS_SLEEP_CYCLES_S4_S 0
|
|
|
|
#define SENS_SAR_START_FORCE_REG (DR_REG_SENS_BASE + 0x002c)
|
|
/* SENS_SAR2_PWDET_EN : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: N/A*/
|
|
#define SENS_SAR2_PWDET_EN (BIT(24))
|
|
#define SENS_SAR2_PWDET_EN_M (BIT(24))
|
|
#define SENS_SAR2_PWDET_EN_V 0x1
|
|
#define SENS_SAR2_PWDET_EN_S 24
|
|
/* SENS_SAR1_STOP : R/W ;bitpos:[23] ;default: 1'b0 ; */
|
|
/*description: stop SAR ADC1 conversion*/
|
|
#define SENS_SAR1_STOP (BIT(23))
|
|
#define SENS_SAR1_STOP_M (BIT(23))
|
|
#define SENS_SAR1_STOP_V 0x1
|
|
#define SENS_SAR1_STOP_S 23
|
|
/* SENS_SAR2_STOP : R/W ;bitpos:[22] ;default: 1'b0 ; */
|
|
/*description: stop SAR ADC2 conversion*/
|
|
#define SENS_SAR2_STOP (BIT(22))
|
|
#define SENS_SAR2_STOP_M (BIT(22))
|
|
#define SENS_SAR2_STOP_V 0x1
|
|
#define SENS_SAR2_STOP_S 22
|
|
/* SENS_PC_INIT : R/W ;bitpos:[21:11] ;default: 11'b0 ; */
|
|
/*description: initialized PC for ULP-coprocessor*/
|
|
#define SENS_PC_INIT 0x000007FF
|
|
#define SENS_PC_INIT_M ((SENS_PC_INIT_V)<<(SENS_PC_INIT_S))
|
|
#define SENS_PC_INIT_V 0x7FF
|
|
#define SENS_PC_INIT_S 11
|
|
/* SENS_SARCLK_EN : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define SENS_SARCLK_EN (BIT(10))
|
|
#define SENS_SARCLK_EN_M (BIT(10))
|
|
#define SENS_SARCLK_EN_V 0x1
|
|
#define SENS_SARCLK_EN_S 10
|
|
/* SENS_ULP_CP_START_TOP : R/W ;bitpos:[9] ;default: 1'b0 ; */
|
|
/*description: Write 1 to start ULP-coprocessor only active when reg_ulp_cp_force_start_top
|
|
= 1*/
|
|
#define SENS_ULP_CP_START_TOP (BIT(9))
|
|
#define SENS_ULP_CP_START_TOP_M (BIT(9))
|
|
#define SENS_ULP_CP_START_TOP_V 0x1
|
|
#define SENS_ULP_CP_START_TOP_S 9
|
|
/* SENS_ULP_CP_FORCE_START_TOP : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: 1: ULP-coprocessor is started by SW 0: ULP-coprocessor is started by timer*/
|
|
#define SENS_ULP_CP_FORCE_START_TOP (BIT(8))
|
|
#define SENS_ULP_CP_FORCE_START_TOP_M (BIT(8))
|
|
#define SENS_ULP_CP_FORCE_START_TOP_V 0x1
|
|
#define SENS_ULP_CP_FORCE_START_TOP_S 8
|
|
/* SENS_SAR2_PWDET_CCT : R/W ;bitpos:[7:5] ;default: 3'b0 ; */
|
|
/*description: SAR2_PWDET_CCT PA power detector capacitance tuning.*/
|
|
#define SENS_SAR2_PWDET_CCT 0x00000007
|
|
#define SENS_SAR2_PWDET_CCT_M ((SENS_SAR2_PWDET_CCT_V)<<(SENS_SAR2_PWDET_CCT_S))
|
|
#define SENS_SAR2_PWDET_CCT_V 0x7
|
|
#define SENS_SAR2_PWDET_CCT_S 5
|
|
/* SENS_SAR2_EN_TEST : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: SAR2_EN_TEST only active when reg_sar2_dig_force = 0*/
|
|
#define SENS_SAR2_EN_TEST (BIT(4))
|
|
#define SENS_SAR2_EN_TEST_M (BIT(4))
|
|
#define SENS_SAR2_EN_TEST_V 0x1
|
|
#define SENS_SAR2_EN_TEST_S 4
|
|
/* SENS_SAR2_BIT_WIDTH : R/W ;bitpos:[3:2] ;default: 2'b11 ; */
|
|
/*description: 00: 9 bit 01: 10 bits 10: 11bits 11: 12bits*/
|
|
#define SENS_SAR2_BIT_WIDTH 0x00000003
|
|
#define SENS_SAR2_BIT_WIDTH_M ((SENS_SAR2_BIT_WIDTH_V)<<(SENS_SAR2_BIT_WIDTH_S))
|
|
#define SENS_SAR2_BIT_WIDTH_V 0x3
|
|
#define SENS_SAR2_BIT_WIDTH_S 2
|
|
/* SENS_SAR1_BIT_WIDTH : R/W ;bitpos:[1:0] ;default: 2'b11 ; */
|
|
/*description: 00: 9 bit 01: 10 bits 10: 11bits 11: 12bits*/
|
|
#define SENS_SAR1_BIT_WIDTH 0x00000003
|
|
#define SENS_SAR1_BIT_WIDTH_M ((SENS_SAR1_BIT_WIDTH_V)<<(SENS_SAR1_BIT_WIDTH_S))
|
|
#define SENS_SAR1_BIT_WIDTH_V 0x3
|
|
#define SENS_SAR1_BIT_WIDTH_S 0
|
|
|
|
#define SENS_SAR_MEM_WR_CTRL_REG (DR_REG_SENS_BASE + 0x0030)
|
|
/* SENS_RTC_MEM_WR_OFFST_CLR : WO ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: */
|
|
#define SENS_RTC_MEM_WR_OFFST_CLR (BIT(22))
|
|
#define SENS_RTC_MEM_WR_OFFST_CLR_M (BIT(22))
|
|
#define SENS_RTC_MEM_WR_OFFST_CLR_V 0x1
|
|
#define SENS_RTC_MEM_WR_OFFST_CLR_S 22
|
|
/* SENS_MEM_WR_ADDR_SIZE : R/W ;bitpos:[21:11] ;default: 11'd512 ; */
|
|
/*description: */
|
|
#define SENS_MEM_WR_ADDR_SIZE 0x000007FF
|
|
#define SENS_MEM_WR_ADDR_SIZE_M ((SENS_MEM_WR_ADDR_SIZE_V)<<(SENS_MEM_WR_ADDR_SIZE_S))
|
|
#define SENS_MEM_WR_ADDR_SIZE_V 0x7FF
|
|
#define SENS_MEM_WR_ADDR_SIZE_S 11
|
|
/* SENS_MEM_WR_ADDR_INIT : R/W ;bitpos:[10:0] ;default: 11'd512 ; */
|
|
/*description: */
|
|
#define SENS_MEM_WR_ADDR_INIT 0x000007FF
|
|
#define SENS_MEM_WR_ADDR_INIT_M ((SENS_MEM_WR_ADDR_INIT_V)<<(SENS_MEM_WR_ADDR_INIT_S))
|
|
#define SENS_MEM_WR_ADDR_INIT_V 0x7FF
|
|
#define SENS_MEM_WR_ADDR_INIT_S 0
|
|
|
|
#define SENS_SAR_ATTEN1_REG (DR_REG_SENS_BASE + 0x0034)
|
|
/* SENS_SAR1_ATTEN : R/W ;bitpos:[31:0] ;default: 32'hffffffff ; */
|
|
/*description: 2-bit attenuation for each pad 11:1dB 10:6dB 01:3dB 00:0dB*/
|
|
#define SENS_SAR1_ATTEN 0xFFFFFFFF
|
|
#define SENS_SAR1_ATTEN_M ((SENS_SAR1_ATTEN_V)<<(SENS_SAR1_ATTEN_S))
|
|
#define SENS_SAR1_ATTEN_V 0xFFFFFFFF
|
|
#define SENS_SAR1_ATTEN_S 0
|
|
|
|
#define SENS_SAR_ATTEN2_REG (DR_REG_SENS_BASE + 0x0038)
|
|
/* SENS_SAR2_ATTEN : R/W ;bitpos:[31:0] ;default: 32'hffffffff ; */
|
|
/*description: 2-bit attenuation for each pad 11:1dB 10:6dB 01:3dB 00:0dB*/
|
|
#define SENS_SAR2_ATTEN 0xFFFFFFFF
|
|
#define SENS_SAR2_ATTEN_M ((SENS_SAR2_ATTEN_V)<<(SENS_SAR2_ATTEN_S))
|
|
#define SENS_SAR2_ATTEN_V 0xFFFFFFFF
|
|
#define SENS_SAR2_ATTEN_S 0
|
|
|
|
#define SENS_SAR_SLAVE_ADDR1_REG (DR_REG_SENS_BASE + 0x003c)
|
|
/* SENS_MEAS_STATUS : RO ;bitpos:[29:22] ;default: 8'h0 ; */
|
|
/*description: */
|
|
#define SENS_MEAS_STATUS 0x000000FF
|
|
#define SENS_MEAS_STATUS_M ((SENS_MEAS_STATUS_V)<<(SENS_MEAS_STATUS_S))
|
|
#define SENS_MEAS_STATUS_V 0xFF
|
|
#define SENS_MEAS_STATUS_S 22
|
|
/* SENS_I2C_SLAVE_ADDR0 : R/W ;bitpos:[21:11] ;default: 11'h0 ; */
|
|
/*description: */
|
|
#define SENS_I2C_SLAVE_ADDR0 0x000007FF
|
|
#define SENS_I2C_SLAVE_ADDR0_M ((SENS_I2C_SLAVE_ADDR0_V)<<(SENS_I2C_SLAVE_ADDR0_S))
|
|
#define SENS_I2C_SLAVE_ADDR0_V 0x7FF
|
|
#define SENS_I2C_SLAVE_ADDR0_S 11
|
|
/* SENS_I2C_SLAVE_ADDR1 : R/W ;bitpos:[10:0] ;default: 11'h0 ; */
|
|
/*description: */
|
|
#define SENS_I2C_SLAVE_ADDR1 0x000007FF
|
|
#define SENS_I2C_SLAVE_ADDR1_M ((SENS_I2C_SLAVE_ADDR1_V)<<(SENS_I2C_SLAVE_ADDR1_S))
|
|
#define SENS_I2C_SLAVE_ADDR1_V 0x7FF
|
|
#define SENS_I2C_SLAVE_ADDR1_S 0
|
|
|
|
#define SENS_SAR_SLAVE_ADDR2_REG (DR_REG_SENS_BASE + 0x0040)
|
|
/* SENS_I2C_SLAVE_ADDR2 : R/W ;bitpos:[21:11] ;default: 11'h0 ; */
|
|
/*description: */
|
|
#define SENS_I2C_SLAVE_ADDR2 0x000007FF
|
|
#define SENS_I2C_SLAVE_ADDR2_M ((SENS_I2C_SLAVE_ADDR2_V)<<(SENS_I2C_SLAVE_ADDR2_S))
|
|
#define SENS_I2C_SLAVE_ADDR2_V 0x7FF
|
|
#define SENS_I2C_SLAVE_ADDR2_S 11
|
|
/* SENS_I2C_SLAVE_ADDR3 : R/W ;bitpos:[10:0] ;default: 11'h0 ; */
|
|
/*description: */
|
|
#define SENS_I2C_SLAVE_ADDR3 0x000007FF
|
|
#define SENS_I2C_SLAVE_ADDR3_M ((SENS_I2C_SLAVE_ADDR3_V)<<(SENS_I2C_SLAVE_ADDR3_S))
|
|
#define SENS_I2C_SLAVE_ADDR3_V 0x7FF
|
|
#define SENS_I2C_SLAVE_ADDR3_S 0
|
|
|
|
#define SENS_SAR_SLAVE_ADDR3_REG (DR_REG_SENS_BASE + 0x0044)
|
|
/* SENS_TSENS_RDY_OUT : RO ;bitpos:[30] ;default: 1'h0 ; */
|
|
/*description: indicate temperature sensor out ready*/
|
|
#define SENS_TSENS_RDY_OUT (BIT(30))
|
|
#define SENS_TSENS_RDY_OUT_M (BIT(30))
|
|
#define SENS_TSENS_RDY_OUT_V 0x1
|
|
#define SENS_TSENS_RDY_OUT_S 30
|
|
/* SENS_TSENS_OUT : RO ;bitpos:[29:22] ;default: 8'h0 ; */
|
|
/*description: temperature sensor data out*/
|
|
#define SENS_TSENS_OUT 0x000000FF
|
|
#define SENS_TSENS_OUT_M ((SENS_TSENS_OUT_V)<<(SENS_TSENS_OUT_S))
|
|
#define SENS_TSENS_OUT_V 0xFF
|
|
#define SENS_TSENS_OUT_S 22
|
|
/* SENS_I2C_SLAVE_ADDR4 : R/W ;bitpos:[21:11] ;default: 11'h0 ; */
|
|
/*description: */
|
|
#define SENS_I2C_SLAVE_ADDR4 0x000007FF
|
|
#define SENS_I2C_SLAVE_ADDR4_M ((SENS_I2C_SLAVE_ADDR4_V)<<(SENS_I2C_SLAVE_ADDR4_S))
|
|
#define SENS_I2C_SLAVE_ADDR4_V 0x7FF
|
|
#define SENS_I2C_SLAVE_ADDR4_S 11
|
|
/* SENS_I2C_SLAVE_ADDR5 : R/W ;bitpos:[10:0] ;default: 11'h0 ; */
|
|
/*description: */
|
|
#define SENS_I2C_SLAVE_ADDR5 0x000007FF
|
|
#define SENS_I2C_SLAVE_ADDR5_M ((SENS_I2C_SLAVE_ADDR5_V)<<(SENS_I2C_SLAVE_ADDR5_S))
|
|
#define SENS_I2C_SLAVE_ADDR5_V 0x7FF
|
|
#define SENS_I2C_SLAVE_ADDR5_S 0
|
|
|
|
#define SENS_SAR_SLAVE_ADDR4_REG (DR_REG_SENS_BASE + 0x0048)
|
|
/* SENS_I2C_DONE : RO ;bitpos:[30] ;default: 1'h0 ; */
|
|
/*description: indicate I2C done*/
|
|
#define SENS_I2C_DONE (BIT(30))
|
|
#define SENS_I2C_DONE_M (BIT(30))
|
|
#define SENS_I2C_DONE_V 0x1
|
|
#define SENS_I2C_DONE_S 30
|
|
/* SENS_I2C_RDATA : RO ;bitpos:[29:22] ;default: 8'h0 ; */
|
|
/*description: I2C read data*/
|
|
#define SENS_I2C_RDATA 0x000000FF
|
|
#define SENS_I2C_RDATA_M ((SENS_I2C_RDATA_V)<<(SENS_I2C_RDATA_S))
|
|
#define SENS_I2C_RDATA_V 0xFF
|
|
#define SENS_I2C_RDATA_S 22
|
|
/* SENS_I2C_SLAVE_ADDR6 : R/W ;bitpos:[21:11] ;default: 11'h0 ; */
|
|
/*description: */
|
|
#define SENS_I2C_SLAVE_ADDR6 0x000007FF
|
|
#define SENS_I2C_SLAVE_ADDR6_M ((SENS_I2C_SLAVE_ADDR6_V)<<(SENS_I2C_SLAVE_ADDR6_S))
|
|
#define SENS_I2C_SLAVE_ADDR6_V 0x7FF
|
|
#define SENS_I2C_SLAVE_ADDR6_S 11
|
|
/* SENS_I2C_SLAVE_ADDR7 : R/W ;bitpos:[10:0] ;default: 11'h0 ; */
|
|
/*description: */
|
|
#define SENS_I2C_SLAVE_ADDR7 0x000007FF
|
|
#define SENS_I2C_SLAVE_ADDR7_M ((SENS_I2C_SLAVE_ADDR7_V)<<(SENS_I2C_SLAVE_ADDR7_S))
|
|
#define SENS_I2C_SLAVE_ADDR7_V 0x7FF
|
|
#define SENS_I2C_SLAVE_ADDR7_S 0
|
|
|
|
#define SENS_SAR_TSENS_CTRL_REG (DR_REG_SENS_BASE + 0x004c)
|
|
/* SENS_TSENS_DUMP_OUT : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: temperature sensor dump out only active when reg_tsens_power_up_force = 1*/
|
|
#define SENS_TSENS_DUMP_OUT (BIT(26))
|
|
#define SENS_TSENS_DUMP_OUT_M (BIT(26))
|
|
#define SENS_TSENS_DUMP_OUT_V 0x1
|
|
#define SENS_TSENS_DUMP_OUT_S 26
|
|
/* SENS_TSENS_POWER_UP_FORCE : R/W ;bitpos:[25] ;default: 1'b0 ; */
|
|
/*description: 1: dump out & power up controlled by SW 0: by FSM*/
|
|
#define SENS_TSENS_POWER_UP_FORCE (BIT(25))
|
|
#define SENS_TSENS_POWER_UP_FORCE_M (BIT(25))
|
|
#define SENS_TSENS_POWER_UP_FORCE_V 0x1
|
|
#define SENS_TSENS_POWER_UP_FORCE_S 25
|
|
/* SENS_TSENS_POWER_UP : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: temperature sensor power up*/
|
|
#define SENS_TSENS_POWER_UP (BIT(24))
|
|
#define SENS_TSENS_POWER_UP_M (BIT(24))
|
|
#define SENS_TSENS_POWER_UP_V 0x1
|
|
#define SENS_TSENS_POWER_UP_S 24
|
|
/* SENS_TSENS_CLK_DIV : R/W ;bitpos:[23:16] ;default: 8'd6 ; */
|
|
/*description: temperature sensor clock divider*/
|
|
#define SENS_TSENS_CLK_DIV 0x000000FF
|
|
#define SENS_TSENS_CLK_DIV_M ((SENS_TSENS_CLK_DIV_V)<<(SENS_TSENS_CLK_DIV_S))
|
|
#define SENS_TSENS_CLK_DIV_V 0xFF
|
|
#define SENS_TSENS_CLK_DIV_S 16
|
|
/* SENS_TSENS_IN_INV : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
/*description: invert temperature sensor data*/
|
|
#define SENS_TSENS_IN_INV (BIT(15))
|
|
#define SENS_TSENS_IN_INV_M (BIT(15))
|
|
#define SENS_TSENS_IN_INV_V 0x1
|
|
#define SENS_TSENS_IN_INV_S 15
|
|
/* SENS_TSENS_CLK_GATED : R/W ;bitpos:[14] ;default: 1'b1 ; */
|
|
/*description: */
|
|
#define SENS_TSENS_CLK_GATED (BIT(14))
|
|
#define SENS_TSENS_CLK_GATED_M (BIT(14))
|
|
#define SENS_TSENS_CLK_GATED_V 0x1
|
|
#define SENS_TSENS_CLK_GATED_S 14
|
|
/* SENS_TSENS_CLK_INV : R/W ;bitpos:[13] ;default: 1'b1 ; */
|
|
/*description: */
|
|
#define SENS_TSENS_CLK_INV (BIT(13))
|
|
#define SENS_TSENS_CLK_INV_M (BIT(13))
|
|
#define SENS_TSENS_CLK_INV_V 0x1
|
|
#define SENS_TSENS_CLK_INV_S 13
|
|
/* SENS_TSENS_XPD_FORCE : R/W ;bitpos:[12] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define SENS_TSENS_XPD_FORCE (BIT(12))
|
|
#define SENS_TSENS_XPD_FORCE_M (BIT(12))
|
|
#define SENS_TSENS_XPD_FORCE_V 0x1
|
|
#define SENS_TSENS_XPD_FORCE_S 12
|
|
/* SENS_TSENS_XPD_WAIT : R/W ;bitpos:[11:0] ;default: 12'h2 ; */
|
|
/*description: */
|
|
#define SENS_TSENS_XPD_WAIT 0x00000FFF
|
|
#define SENS_TSENS_XPD_WAIT_M ((SENS_TSENS_XPD_WAIT_V)<<(SENS_TSENS_XPD_WAIT_S))
|
|
#define SENS_TSENS_XPD_WAIT_V 0xFFF
|
|
#define SENS_TSENS_XPD_WAIT_S 0
|
|
|
|
#define SENS_SAR_I2C_CTRL_REG (DR_REG_SENS_BASE + 0x0050)
|
|
/* SENS_SAR_I2C_START_FORCE : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: 1: I2C started by SW 0: I2C started by FSM*/
|
|
#define SENS_SAR_I2C_START_FORCE (BIT(29))
|
|
#define SENS_SAR_I2C_START_FORCE_M (BIT(29))
|
|
#define SENS_SAR_I2C_START_FORCE_V 0x1
|
|
#define SENS_SAR_I2C_START_FORCE_S 29
|
|
/* SENS_SAR_I2C_START : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: start I2C only active when reg_sar_i2c_start_force = 1*/
|
|
#define SENS_SAR_I2C_START (BIT(28))
|
|
#define SENS_SAR_I2C_START_M (BIT(28))
|
|
#define SENS_SAR_I2C_START_V 0x1
|
|
#define SENS_SAR_I2C_START_S 28
|
|
/* SENS_SAR_I2C_CTRL : R/W ;bitpos:[27:0] ;default: 28'b0 ; */
|
|
/*description: I2C control data only active when reg_sar_i2c_start_force = 1*/
|
|
#define SENS_SAR_I2C_CTRL 0x0FFFFFFF
|
|
#define SENS_SAR_I2C_CTRL_M ((SENS_SAR_I2C_CTRL_V)<<(SENS_SAR_I2C_CTRL_S))
|
|
#define SENS_SAR_I2C_CTRL_V 0xFFFFFFF
|
|
#define SENS_SAR_I2C_CTRL_S 0
|
|
|
|
#define SENS_SAR_MEAS_START1_REG (DR_REG_SENS_BASE + 0x0054)
|
|
/* SENS_SAR1_EN_PAD_FORCE : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: 1: SAR ADC1 pad enable bitmap is controlled by SW 0: SAR ADC1
|
|
pad enable bitmap is controlled by ULP-coprocessor*/
|
|
#define SENS_SAR1_EN_PAD_FORCE (BIT(31))
|
|
#define SENS_SAR1_EN_PAD_FORCE_M (BIT(31))
|
|
#define SENS_SAR1_EN_PAD_FORCE_V 0x1
|
|
#define SENS_SAR1_EN_PAD_FORCE_S 31
|
|
/* SENS_SAR1_EN_PAD : R/W ;bitpos:[30:19] ;default: 12'b0 ; */
|
|
/*description: SAR ADC1 pad enable bitmap only active when reg_sar1_en_pad_force = 1*/
|
|
#define SENS_SAR1_EN_PAD 0x00000FFF
|
|
#define SENS_SAR1_EN_PAD_M ((SENS_SAR1_EN_PAD_V)<<(SENS_SAR1_EN_PAD_S))
|
|
#define SENS_SAR1_EN_PAD_V 0xFFF
|
|
#define SENS_SAR1_EN_PAD_S 19
|
|
/* SENS_MEAS1_START_FORCE : R/W ;bitpos:[18] ;default: 1'b0 ; */
|
|
/*description: 1: SAR ADC1 controller (in RTC) is started by SW 0: SAR ADC1
|
|
controller is started by ULP-coprocessor*/
|
|
#define SENS_MEAS1_START_FORCE (BIT(18))
|
|
#define SENS_MEAS1_START_FORCE_M (BIT(18))
|
|
#define SENS_MEAS1_START_FORCE_V 0x1
|
|
#define SENS_MEAS1_START_FORCE_S 18
|
|
/* SENS_MEAS1_START_SAR : R/W ;bitpos:[17] ;default: 1'b0 ; */
|
|
/*description: SAR ADC1 controller (in RTC) starts conversion only active when
|
|
reg_meas1_start_force = 1*/
|
|
#define SENS_MEAS1_START_SAR (BIT(17))
|
|
#define SENS_MEAS1_START_SAR_M (BIT(17))
|
|
#define SENS_MEAS1_START_SAR_V 0x1
|
|
#define SENS_MEAS1_START_SAR_S 17
|
|
/* SENS_MEAS1_DONE_SAR : RO ;bitpos:[16] ;default: 1'b0 ; */
|
|
/*description: SAR ADC1 conversion done indication*/
|
|
#define SENS_MEAS1_DONE_SAR (BIT(16))
|
|
#define SENS_MEAS1_DONE_SAR_M (BIT(16))
|
|
#define SENS_MEAS1_DONE_SAR_V 0x1
|
|
#define SENS_MEAS1_DONE_SAR_S 16
|
|
/* SENS_MEAS1_DATA_SAR : RO ;bitpos:[15:0] ;default: 16'b0 ; */
|
|
/*description: SAR ADC1 data*/
|
|
#define SENS_MEAS1_DATA_SAR 0x0000FFFF
|
|
#define SENS_MEAS1_DATA_SAR_M ((SENS_MEAS1_DATA_SAR_V)<<(SENS_MEAS1_DATA_SAR_S))
|
|
#define SENS_MEAS1_DATA_SAR_V 0xFFFF
|
|
#define SENS_MEAS1_DATA_SAR_S 0
|
|
|
|
#define SENS_SAR_TOUCH_CTRL1_REG (DR_REG_SENS_BASE + 0x0058)
|
|
/* SENS_HALL_PHASE_FORCE : R/W ;bitpos:[27] ;default: 1'b0 ; */
|
|
/*description: 1: HALL PHASE is controlled by SW 0: HALL PHASE is controlled
|
|
by FSM in ULP-coprocessor*/
|
|
#define SENS_HALL_PHASE_FORCE (BIT(27))
|
|
#define SENS_HALL_PHASE_FORCE_M (BIT(27))
|
|
#define SENS_HALL_PHASE_FORCE_V 0x1
|
|
#define SENS_HALL_PHASE_FORCE_S 27
|
|
/* SENS_XPD_HALL_FORCE : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: 1: XPD HALL is controlled by SW. 0: XPD HALL is controlled by
|
|
FSM in ULP-coprocessor*/
|
|
#define SENS_XPD_HALL_FORCE (BIT(26))
|
|
#define SENS_XPD_HALL_FORCE_M (BIT(26))
|
|
#define SENS_XPD_HALL_FORCE_V 0x1
|
|
#define SENS_XPD_HALL_FORCE_S 26
|
|
/* SENS_TOUCH_OUT_1EN : R/W ;bitpos:[25] ;default: 1'b1 ; */
|
|
/*description: 1: wakeup interrupt is generated if SET1 is "touched" 0:
|
|
wakeup interrupt is generated only if SET1 & SET2 is both "touched"*/
|
|
#define SENS_TOUCH_OUT_1EN (BIT(25))
|
|
#define SENS_TOUCH_OUT_1EN_M (BIT(25))
|
|
#define SENS_TOUCH_OUT_1EN_V 0x1
|
|
#define SENS_TOUCH_OUT_1EN_S 25
|
|
/* SENS_TOUCH_OUT_SEL : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: 1: when the counter is greater then the threshold the touch
|
|
pad is considered as "touched" 0: when the counter is less than the threshold the touch pad is considered as "touched"*/
|
|
#define SENS_TOUCH_OUT_SEL (BIT(24))
|
|
#define SENS_TOUCH_OUT_SEL_M (BIT(24))
|
|
#define SENS_TOUCH_OUT_SEL_V 0x1
|
|
#define SENS_TOUCH_OUT_SEL_S 24
|
|
/* SENS_TOUCH_XPD_WAIT : R/W ;bitpos:[23:16] ;default: 8'h4 ; */
|
|
/*description: the waiting cycles (in 8MHz) between TOUCH_START and TOUCH_XPD*/
|
|
#define SENS_TOUCH_XPD_WAIT 0x000000FF
|
|
#define SENS_TOUCH_XPD_WAIT_M ((SENS_TOUCH_XPD_WAIT_V)<<(SENS_TOUCH_XPD_WAIT_S))
|
|
#define SENS_TOUCH_XPD_WAIT_V 0xFF
|
|
#define SENS_TOUCH_XPD_WAIT_S 16
|
|
/* SENS_TOUCH_MEAS_DELAY : R/W ;bitpos:[15:0] ;default: 16'h1000 ; */
|
|
/*description: the meas length (in 8MHz)*/
|
|
#define SENS_TOUCH_MEAS_DELAY 0x0000FFFF
|
|
#define SENS_TOUCH_MEAS_DELAY_M ((SENS_TOUCH_MEAS_DELAY_V)<<(SENS_TOUCH_MEAS_DELAY_S))
|
|
#define SENS_TOUCH_MEAS_DELAY_V 0xFFFF
|
|
#define SENS_TOUCH_MEAS_DELAY_S 0
|
|
|
|
#define SENS_SAR_TOUCH_THRES1_REG (DR_REG_SENS_BASE + 0x005c)
|
|
/* SENS_TOUCH_OUT_TH0 : R/W ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
/*description: the threshold for touch pad 0*/
|
|
#define SENS_TOUCH_OUT_TH0 0x0000FFFF
|
|
#define SENS_TOUCH_OUT_TH0_M ((SENS_TOUCH_OUT_TH0_V)<<(SENS_TOUCH_OUT_TH0_S))
|
|
#define SENS_TOUCH_OUT_TH0_V 0xFFFF
|
|
#define SENS_TOUCH_OUT_TH0_S 16
|
|
/* SENS_TOUCH_OUT_TH1 : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: the threshold for touch pad 1*/
|
|
#define SENS_TOUCH_OUT_TH1 0x0000FFFF
|
|
#define SENS_TOUCH_OUT_TH1_M ((SENS_TOUCH_OUT_TH1_V)<<(SENS_TOUCH_OUT_TH1_S))
|
|
#define SENS_TOUCH_OUT_TH1_V 0xFFFF
|
|
#define SENS_TOUCH_OUT_TH1_S 0
|
|
|
|
#define SENS_SAR_TOUCH_THRES2_REG (DR_REG_SENS_BASE + 0x0060)
|
|
/* SENS_TOUCH_OUT_TH2 : R/W ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
/*description: the threshold for touch pad 2*/
|
|
#define SENS_TOUCH_OUT_TH2 0x0000FFFF
|
|
#define SENS_TOUCH_OUT_TH2_M ((SENS_TOUCH_OUT_TH2_V)<<(SENS_TOUCH_OUT_TH2_S))
|
|
#define SENS_TOUCH_OUT_TH2_V 0xFFFF
|
|
#define SENS_TOUCH_OUT_TH2_S 16
|
|
/* SENS_TOUCH_OUT_TH3 : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: the threshold for touch pad 3*/
|
|
#define SENS_TOUCH_OUT_TH3 0x0000FFFF
|
|
#define SENS_TOUCH_OUT_TH3_M ((SENS_TOUCH_OUT_TH3_V)<<(SENS_TOUCH_OUT_TH3_S))
|
|
#define SENS_TOUCH_OUT_TH3_V 0xFFFF
|
|
#define SENS_TOUCH_OUT_TH3_S 0
|
|
|
|
#define SENS_SAR_TOUCH_THRES3_REG (DR_REG_SENS_BASE + 0x0064)
|
|
/* SENS_TOUCH_OUT_TH4 : R/W ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
/*description: the threshold for touch pad 4*/
|
|
#define SENS_TOUCH_OUT_TH4 0x0000FFFF
|
|
#define SENS_TOUCH_OUT_TH4_M ((SENS_TOUCH_OUT_TH4_V)<<(SENS_TOUCH_OUT_TH4_S))
|
|
#define SENS_TOUCH_OUT_TH4_V 0xFFFF
|
|
#define SENS_TOUCH_OUT_TH4_S 16
|
|
/* SENS_TOUCH_OUT_TH5 : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: the threshold for touch pad 5*/
|
|
#define SENS_TOUCH_OUT_TH5 0x0000FFFF
|
|
#define SENS_TOUCH_OUT_TH5_M ((SENS_TOUCH_OUT_TH5_V)<<(SENS_TOUCH_OUT_TH5_S))
|
|
#define SENS_TOUCH_OUT_TH5_V 0xFFFF
|
|
#define SENS_TOUCH_OUT_TH5_S 0
|
|
|
|
#define SENS_SAR_TOUCH_THRES4_REG (DR_REG_SENS_BASE + 0x0068)
|
|
/* SENS_TOUCH_OUT_TH6 : R/W ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
/*description: the threshold for touch pad 6*/
|
|
#define SENS_TOUCH_OUT_TH6 0x0000FFFF
|
|
#define SENS_TOUCH_OUT_TH6_M ((SENS_TOUCH_OUT_TH6_V)<<(SENS_TOUCH_OUT_TH6_S))
|
|
#define SENS_TOUCH_OUT_TH6_V 0xFFFF
|
|
#define SENS_TOUCH_OUT_TH6_S 16
|
|
/* SENS_TOUCH_OUT_TH7 : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: the threshold for touch pad 7*/
|
|
#define SENS_TOUCH_OUT_TH7 0x0000FFFF
|
|
#define SENS_TOUCH_OUT_TH7_M ((SENS_TOUCH_OUT_TH7_V)<<(SENS_TOUCH_OUT_TH7_S))
|
|
#define SENS_TOUCH_OUT_TH7_V 0xFFFF
|
|
#define SENS_TOUCH_OUT_TH7_S 0
|
|
|
|
#define SENS_SAR_TOUCH_THRES5_REG (DR_REG_SENS_BASE + 0x006c)
|
|
/* SENS_TOUCH_OUT_TH8 : R/W ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
/*description: the threshold for touch pad 8*/
|
|
#define SENS_TOUCH_OUT_TH8 0x0000FFFF
|
|
#define SENS_TOUCH_OUT_TH8_M ((SENS_TOUCH_OUT_TH8_V)<<(SENS_TOUCH_OUT_TH8_S))
|
|
#define SENS_TOUCH_OUT_TH8_V 0xFFFF
|
|
#define SENS_TOUCH_OUT_TH8_S 16
|
|
/* SENS_TOUCH_OUT_TH9 : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: the threshold for touch pad 9*/
|
|
#define SENS_TOUCH_OUT_TH9 0x0000FFFF
|
|
#define SENS_TOUCH_OUT_TH9_M ((SENS_TOUCH_OUT_TH9_V)<<(SENS_TOUCH_OUT_TH9_S))
|
|
#define SENS_TOUCH_OUT_TH9_V 0xFFFF
|
|
#define SENS_TOUCH_OUT_TH9_S 0
|
|
|
|
#define SENS_SAR_TOUCH_OUT1_REG (DR_REG_SENS_BASE + 0x0070)
|
|
/* SENS_TOUCH_MEAS_OUT0 : RO ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
/*description: the counter for touch pad 0*/
|
|
#define SENS_TOUCH_MEAS_OUT0 0x0000FFFF
|
|
#define SENS_TOUCH_MEAS_OUT0_M ((SENS_TOUCH_MEAS_OUT0_V)<<(SENS_TOUCH_MEAS_OUT0_S))
|
|
#define SENS_TOUCH_MEAS_OUT0_V 0xFFFF
|
|
#define SENS_TOUCH_MEAS_OUT0_S 16
|
|
/* SENS_TOUCH_MEAS_OUT1 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: the counter for touch pad 1*/
|
|
#define SENS_TOUCH_MEAS_OUT1 0x0000FFFF
|
|
#define SENS_TOUCH_MEAS_OUT1_M ((SENS_TOUCH_MEAS_OUT1_V)<<(SENS_TOUCH_MEAS_OUT1_S))
|
|
#define SENS_TOUCH_MEAS_OUT1_V 0xFFFF
|
|
#define SENS_TOUCH_MEAS_OUT1_S 0
|
|
|
|
#define SENS_SAR_TOUCH_OUT2_REG (DR_REG_SENS_BASE + 0x0074)
|
|
/* SENS_TOUCH_MEAS_OUT2 : RO ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
/*description: the counter for touch pad 2*/
|
|
#define SENS_TOUCH_MEAS_OUT2 0x0000FFFF
|
|
#define SENS_TOUCH_MEAS_OUT2_M ((SENS_TOUCH_MEAS_OUT2_V)<<(SENS_TOUCH_MEAS_OUT2_S))
|
|
#define SENS_TOUCH_MEAS_OUT2_V 0xFFFF
|
|
#define SENS_TOUCH_MEAS_OUT2_S 16
|
|
/* SENS_TOUCH_MEAS_OUT3 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: the counter for touch pad 3*/
|
|
#define SENS_TOUCH_MEAS_OUT3 0x0000FFFF
|
|
#define SENS_TOUCH_MEAS_OUT3_M ((SENS_TOUCH_MEAS_OUT3_V)<<(SENS_TOUCH_MEAS_OUT3_S))
|
|
#define SENS_TOUCH_MEAS_OUT3_V 0xFFFF
|
|
#define SENS_TOUCH_MEAS_OUT3_S 0
|
|
|
|
#define SENS_SAR_TOUCH_OUT3_REG (DR_REG_SENS_BASE + 0x0078)
|
|
/* SENS_TOUCH_MEAS_OUT4 : RO ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
/*description: the counter for touch pad 4*/
|
|
#define SENS_TOUCH_MEAS_OUT4 0x0000FFFF
|
|
#define SENS_TOUCH_MEAS_OUT4_M ((SENS_TOUCH_MEAS_OUT4_V)<<(SENS_TOUCH_MEAS_OUT4_S))
|
|
#define SENS_TOUCH_MEAS_OUT4_V 0xFFFF
|
|
#define SENS_TOUCH_MEAS_OUT4_S 16
|
|
/* SENS_TOUCH_MEAS_OUT5 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: the counter for touch pad 5*/
|
|
#define SENS_TOUCH_MEAS_OUT5 0x0000FFFF
|
|
#define SENS_TOUCH_MEAS_OUT5_M ((SENS_TOUCH_MEAS_OUT5_V)<<(SENS_TOUCH_MEAS_OUT5_S))
|
|
#define SENS_TOUCH_MEAS_OUT5_V 0xFFFF
|
|
#define SENS_TOUCH_MEAS_OUT5_S 0
|
|
|
|
#define SENS_SAR_TOUCH_OUT4_REG (DR_REG_SENS_BASE + 0x007c)
|
|
/* SENS_TOUCH_MEAS_OUT6 : RO ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
/*description: the counter for touch pad 6*/
|
|
#define SENS_TOUCH_MEAS_OUT6 0x0000FFFF
|
|
#define SENS_TOUCH_MEAS_OUT6_M ((SENS_TOUCH_MEAS_OUT6_V)<<(SENS_TOUCH_MEAS_OUT6_S))
|
|
#define SENS_TOUCH_MEAS_OUT6_V 0xFFFF
|
|
#define SENS_TOUCH_MEAS_OUT6_S 16
|
|
/* SENS_TOUCH_MEAS_OUT7 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: the counter for touch pad 7*/
|
|
#define SENS_TOUCH_MEAS_OUT7 0x0000FFFF
|
|
#define SENS_TOUCH_MEAS_OUT7_M ((SENS_TOUCH_MEAS_OUT7_V)<<(SENS_TOUCH_MEAS_OUT7_S))
|
|
#define SENS_TOUCH_MEAS_OUT7_V 0xFFFF
|
|
#define SENS_TOUCH_MEAS_OUT7_S 0
|
|
|
|
#define SENS_SAR_TOUCH_OUT5_REG (DR_REG_SENS_BASE + 0x0080)
|
|
/* SENS_TOUCH_MEAS_OUT8 : RO ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
/*description: the counter for touch pad 8*/
|
|
#define SENS_TOUCH_MEAS_OUT8 0x0000FFFF
|
|
#define SENS_TOUCH_MEAS_OUT8_M ((SENS_TOUCH_MEAS_OUT8_V)<<(SENS_TOUCH_MEAS_OUT8_S))
|
|
#define SENS_TOUCH_MEAS_OUT8_V 0xFFFF
|
|
#define SENS_TOUCH_MEAS_OUT8_S 16
|
|
/* SENS_TOUCH_MEAS_OUT9 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: the counter for touch pad 9*/
|
|
#define SENS_TOUCH_MEAS_OUT9 0x0000FFFF
|
|
#define SENS_TOUCH_MEAS_OUT9_M ((SENS_TOUCH_MEAS_OUT9_V)<<(SENS_TOUCH_MEAS_OUT9_S))
|
|
#define SENS_TOUCH_MEAS_OUT9_V 0xFFFF
|
|
#define SENS_TOUCH_MEAS_OUT9_S 0
|
|
|
|
#define SENS_SAR_TOUCH_CTRL2_REG (DR_REG_SENS_BASE + 0x0084)
|
|
/* SENS_TOUCH_MEAS_EN_CLR : WO ;bitpos:[30] ;default: 1'h0 ; */
|
|
/*description: to clear reg_touch_meas_en*/
|
|
#define SENS_TOUCH_MEAS_EN_CLR (BIT(30))
|
|
#define SENS_TOUCH_MEAS_EN_CLR_M (BIT(30))
|
|
#define SENS_TOUCH_MEAS_EN_CLR_V 0x1
|
|
#define SENS_TOUCH_MEAS_EN_CLR_S 30
|
|
/* SENS_TOUCH_SLEEP_CYCLES : R/W ;bitpos:[29:14] ;default: 16'h100 ; */
|
|
/*description: sleep cycles for timer*/
|
|
#define SENS_TOUCH_SLEEP_CYCLES 0x0000FFFF
|
|
#define SENS_TOUCH_SLEEP_CYCLES_M ((SENS_TOUCH_SLEEP_CYCLES_V)<<(SENS_TOUCH_SLEEP_CYCLES_S))
|
|
#define SENS_TOUCH_SLEEP_CYCLES_V 0xFFFF
|
|
#define SENS_TOUCH_SLEEP_CYCLES_S 14
|
|
/* SENS_TOUCH_START_FORCE : R/W ;bitpos:[13] ;default: 1'h0 ; */
|
|
/*description: 1: to start touch fsm by SW 0: to start touch fsm by timer*/
|
|
#define SENS_TOUCH_START_FORCE (BIT(13))
|
|
#define SENS_TOUCH_START_FORCE_M (BIT(13))
|
|
#define SENS_TOUCH_START_FORCE_V 0x1
|
|
#define SENS_TOUCH_START_FORCE_S 13
|
|
/* SENS_TOUCH_START_EN : R/W ;bitpos:[12] ;default: 1'h0 ; */
|
|
/*description: 1: start touch fsm valid when reg_touch_start_force is set*/
|
|
#define SENS_TOUCH_START_EN (BIT(12))
|
|
#define SENS_TOUCH_START_EN_M (BIT(12))
|
|
#define SENS_TOUCH_START_EN_V 0x1
|
|
#define SENS_TOUCH_START_EN_S 12
|
|
/* SENS_TOUCH_START_FSM_EN : R/W ;bitpos:[11] ;default: 1'h1 ; */
|
|
/*description: 1: TOUCH_START & TOUCH_XPD is controlled by touch fsm 0: TOUCH_START
|
|
& TOUCH_XPD is controlled by registers*/
|
|
#define SENS_TOUCH_START_FSM_EN (BIT(11))
|
|
#define SENS_TOUCH_START_FSM_EN_M (BIT(11))
|
|
#define SENS_TOUCH_START_FSM_EN_V 0x1
|
|
#define SENS_TOUCH_START_FSM_EN_S 11
|
|
/* SENS_TOUCH_MEAS_DONE : RO ;bitpos:[10] ;default: 1'h0 ; */
|
|
/*description: fsm set 1 to indicate touch touch meas is done*/
|
|
#define SENS_TOUCH_MEAS_DONE (BIT(10))
|
|
#define SENS_TOUCH_MEAS_DONE_M (BIT(10))
|
|
#define SENS_TOUCH_MEAS_DONE_V 0x1
|
|
#define SENS_TOUCH_MEAS_DONE_S 10
|
|
/* SENS_TOUCH_MEAS_EN : RO ;bitpos:[9:0] ;default: 10'h0 ; */
|
|
/*description: 10-bit register to indicate which pads are "touched"*/
|
|
#define SENS_TOUCH_MEAS_EN 0x000003FF
|
|
#define SENS_TOUCH_MEAS_EN_M ((SENS_TOUCH_MEAS_EN_V)<<(SENS_TOUCH_MEAS_EN_S))
|
|
#define SENS_TOUCH_MEAS_EN_V 0x3FF
|
|
#define SENS_TOUCH_MEAS_EN_S 0
|
|
|
|
#define SENS_SAR_TOUCH_ENABLE_REG (DR_REG_SENS_BASE + 0x008c)
|
|
/* SENS_TOUCH_PAD_OUTEN1 : R/W ;bitpos:[29:20] ;default: 10'h3ff ; */
|
|
/*description: Bitmap defining SET1 for generating wakeup interrupt. SET1 is
|
|
"touched" only if at least one of touch pad in SET1 is "touched".*/
|
|
#define SENS_TOUCH_PAD_OUTEN1 0x000003FF
|
|
#define SENS_TOUCH_PAD_OUTEN1_M ((SENS_TOUCH_PAD_OUTEN1_V)<<(SENS_TOUCH_PAD_OUTEN1_S))
|
|
#define SENS_TOUCH_PAD_OUTEN1_V 0x3FF
|
|
#define SENS_TOUCH_PAD_OUTEN1_S 20
|
|
/* SENS_TOUCH_PAD_OUTEN2 : R/W ;bitpos:[19:10] ;default: 10'h3ff ; */
|
|
/*description: Bitmap defining SET2 for generating wakeup interrupt. SET2 is
|
|
"touched" only if at least one of touch pad in SET2 is "touched".*/
|
|
#define SENS_TOUCH_PAD_OUTEN2 0x000003FF
|
|
#define SENS_TOUCH_PAD_OUTEN2_M ((SENS_TOUCH_PAD_OUTEN2_V)<<(SENS_TOUCH_PAD_OUTEN2_S))
|
|
#define SENS_TOUCH_PAD_OUTEN2_V 0x3FF
|
|
#define SENS_TOUCH_PAD_OUTEN2_S 10
|
|
/* SENS_TOUCH_PAD_WORKEN : R/W ;bitpos:[9:0] ;default: 10'h3ff ; */
|
|
/*description: Bitmap defining the working set during the measurement.*/
|
|
#define SENS_TOUCH_PAD_WORKEN 0x000003FF
|
|
#define SENS_TOUCH_PAD_WORKEN_M ((SENS_TOUCH_PAD_WORKEN_V)<<(SENS_TOUCH_PAD_WORKEN_S))
|
|
#define SENS_TOUCH_PAD_WORKEN_V 0x3FF
|
|
#define SENS_TOUCH_PAD_WORKEN_S 0
|
|
|
|
#define SENS_SAR_READ_CTRL2_REG (DR_REG_SENS_BASE + 0x0090)
|
|
/* SENS_SAR2_DATA_INV : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: Invert SAR ADC2 data*/
|
|
#define SENS_SAR2_DATA_INV (BIT(29))
|
|
#define SENS_SAR2_DATA_INV_M (BIT(29))
|
|
#define SENS_SAR2_DATA_INV_V 0x1
|
|
#define SENS_SAR2_DATA_INV_S 29
|
|
/* SENS_SAR2_DIG_FORCE : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: 1: SAR ADC2 controlled by DIG ADC2 CTRL or PWDET CTRL 0: SAR
|
|
ADC2 controlled by RTC ADC2 CTRL*/
|
|
#define SENS_SAR2_DIG_FORCE (BIT(28))
|
|
#define SENS_SAR2_DIG_FORCE_M (BIT(28))
|
|
#define SENS_SAR2_DIG_FORCE_V 0x1
|
|
#define SENS_SAR2_DIG_FORCE_S 28
|
|
/* SENS_SAR2_PWDET_FORCE : R/W ;bitpos:[27] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define SENS_SAR2_PWDET_FORCE (BIT(27))
|
|
#define SENS_SAR2_PWDET_FORCE_M (BIT(27))
|
|
#define SENS_SAR2_PWDET_FORCE_V 0x1
|
|
#define SENS_SAR2_PWDET_FORCE_S 27
|
|
/* SENS_SAR2_SAMPLE_NUM : R/W ;bitpos:[26:19] ;default: 8'd0 ; */
|
|
/*description: */
|
|
#define SENS_SAR2_SAMPLE_NUM 0x000000FF
|
|
#define SENS_SAR2_SAMPLE_NUM_M ((SENS_SAR2_SAMPLE_NUM_V)<<(SENS_SAR2_SAMPLE_NUM_S))
|
|
#define SENS_SAR2_SAMPLE_NUM_V 0xFF
|
|
#define SENS_SAR2_SAMPLE_NUM_S 19
|
|
/* SENS_SAR2_CLK_GATED : R/W ;bitpos:[18] ;default: 1'b1 ; */
|
|
/*description: */
|
|
#define SENS_SAR2_CLK_GATED (BIT(18))
|
|
#define SENS_SAR2_CLK_GATED_M (BIT(18))
|
|
#define SENS_SAR2_CLK_GATED_V 0x1
|
|
#define SENS_SAR2_CLK_GATED_S 18
|
|
/* SENS_SAR2_SAMPLE_BIT : R/W ;bitpos:[17:16] ;default: 2'd3 ; */
|
|
/*description: 00: for 9-bit width 01: for 10-bit width 10: for 11-bit width
|
|
11: for 12-bit width*/
|
|
#define SENS_SAR2_SAMPLE_BIT 0x00000003
|
|
#define SENS_SAR2_SAMPLE_BIT_M ((SENS_SAR2_SAMPLE_BIT_V)<<(SENS_SAR2_SAMPLE_BIT_S))
|
|
#define SENS_SAR2_SAMPLE_BIT_V 0x3
|
|
#define SENS_SAR2_SAMPLE_BIT_S 16
|
|
/* SENS_SAR2_SAMPLE_CYCLE : R/W ;bitpos:[15:8] ;default: 8'd9 ; */
|
|
/*description: sample cycles for SAR ADC2*/
|
|
#define SENS_SAR2_SAMPLE_CYCLE 0x000000FF
|
|
#define SENS_SAR2_SAMPLE_CYCLE_M ((SENS_SAR2_SAMPLE_CYCLE_V)<<(SENS_SAR2_SAMPLE_CYCLE_S))
|
|
#define SENS_SAR2_SAMPLE_CYCLE_V 0xFF
|
|
#define SENS_SAR2_SAMPLE_CYCLE_S 8
|
|
/* SENS_SAR2_CLK_DIV : R/W ;bitpos:[7:0] ;default: 8'd2 ; */
|
|
/*description: clock divider*/
|
|
#define SENS_SAR2_CLK_DIV 0x000000FF
|
|
#define SENS_SAR2_CLK_DIV_M ((SENS_SAR2_CLK_DIV_V)<<(SENS_SAR2_CLK_DIV_S))
|
|
#define SENS_SAR2_CLK_DIV_V 0xFF
|
|
#define SENS_SAR2_CLK_DIV_S 0
|
|
|
|
#define SENS_SAR_MEAS_START2_REG (DR_REG_SENS_BASE + 0x0094)
|
|
/* SENS_SAR2_EN_PAD_FORCE : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: 1: SAR ADC2 pad enable bitmap is controlled by SW 0: SAR ADC2
|
|
pad enable bitmap is controlled by ULP-coprocessor*/
|
|
#define SENS_SAR2_EN_PAD_FORCE (BIT(31))
|
|
#define SENS_SAR2_EN_PAD_FORCE_M (BIT(31))
|
|
#define SENS_SAR2_EN_PAD_FORCE_V 0x1
|
|
#define SENS_SAR2_EN_PAD_FORCE_S 31
|
|
/* SENS_SAR2_EN_PAD : R/W ;bitpos:[30:19] ;default: 12'b0 ; */
|
|
/*description: SAR ADC2 pad enable bitmap only active when reg_sar2_en_pad_force = 1*/
|
|
#define SENS_SAR2_EN_PAD 0x00000FFF
|
|
#define SENS_SAR2_EN_PAD_M ((SENS_SAR2_EN_PAD_V)<<(SENS_SAR2_EN_PAD_S))
|
|
#define SENS_SAR2_EN_PAD_V 0xFFF
|
|
#define SENS_SAR2_EN_PAD_S 19
|
|
/* SENS_MEAS2_START_FORCE : R/W ;bitpos:[18] ;default: 1'b0 ; */
|
|
/*description: 1: SAR ADC2 controller (in RTC) is started by SW 0: SAR ADC2
|
|
controller is started by ULP-coprocessor*/
|
|
#define SENS_MEAS2_START_FORCE (BIT(18))
|
|
#define SENS_MEAS2_START_FORCE_M (BIT(18))
|
|
#define SENS_MEAS2_START_FORCE_V 0x1
|
|
#define SENS_MEAS2_START_FORCE_S 18
|
|
/* SENS_MEAS2_START_SAR : R/W ;bitpos:[17] ;default: 1'b0 ; */
|
|
/*description: SAR ADC2 controller (in RTC) starts conversion only active when
|
|
reg_meas2_start_force = 1*/
|
|
#define SENS_MEAS2_START_SAR (BIT(17))
|
|
#define SENS_MEAS2_START_SAR_M (BIT(17))
|
|
#define SENS_MEAS2_START_SAR_V 0x1
|
|
#define SENS_MEAS2_START_SAR_S 17
|
|
/* SENS_MEAS2_DONE_SAR : RO ;bitpos:[16] ;default: 1'b0 ; */
|
|
/*description: SAR ADC2 conversion done indication*/
|
|
#define SENS_MEAS2_DONE_SAR (BIT(16))
|
|
#define SENS_MEAS2_DONE_SAR_M (BIT(16))
|
|
#define SENS_MEAS2_DONE_SAR_V 0x1
|
|
#define SENS_MEAS2_DONE_SAR_S 16
|
|
/* SENS_MEAS2_DATA_SAR : RO ;bitpos:[15:0] ;default: 16'b0 ; */
|
|
/*description: SAR ADC2 data*/
|
|
#define SENS_MEAS2_DATA_SAR 0x0000FFFF
|
|
#define SENS_MEAS2_DATA_SAR_M ((SENS_MEAS2_DATA_SAR_V)<<(SENS_MEAS2_DATA_SAR_S))
|
|
#define SENS_MEAS2_DATA_SAR_V 0xFFFF
|
|
#define SENS_MEAS2_DATA_SAR_S 0
|
|
|
|
#define SENS_SAR_DAC_CTRL1_REG (DR_REG_SENS_BASE + 0x0098)
|
|
/* SENS_DAC_CLK_INV : R/W ;bitpos:[25] ;default: 1'b0 ; */
|
|
/*description: 1: invert PDAC_CLK*/
|
|
#define SENS_DAC_CLK_INV (BIT(25))
|
|
#define SENS_DAC_CLK_INV_M (BIT(25))
|
|
#define SENS_DAC_CLK_INV_V 0x1
|
|
#define SENS_DAC_CLK_INV_S 25
|
|
/* SENS_DAC_CLK_FORCE_HIGH : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: 1: force PDAC_CLK to high*/
|
|
#define SENS_DAC_CLK_FORCE_HIGH (BIT(24))
|
|
#define SENS_DAC_CLK_FORCE_HIGH_M (BIT(24))
|
|
#define SENS_DAC_CLK_FORCE_HIGH_V 0x1
|
|
#define SENS_DAC_CLK_FORCE_HIGH_S 24
|
|
/* SENS_DAC_CLK_FORCE_LOW : R/W ;bitpos:[23] ;default: 1'b0 ; */
|
|
/*description: 1: force PDAC_CLK to low*/
|
|
#define SENS_DAC_CLK_FORCE_LOW (BIT(23))
|
|
#define SENS_DAC_CLK_FORCE_LOW_M (BIT(23))
|
|
#define SENS_DAC_CLK_FORCE_LOW_V 0x1
|
|
#define SENS_DAC_CLK_FORCE_LOW_S 23
|
|
/* SENS_DAC_DIG_FORCE : R/W ;bitpos:[22] ;default: 1'b0 ; */
|
|
/*description: 1: DAC1 & DAC2 use DMA 0: DAC1 & DAC2 do not use DMA*/
|
|
#define SENS_DAC_DIG_FORCE (BIT(22))
|
|
#define SENS_DAC_DIG_FORCE_M (BIT(22))
|
|
#define SENS_DAC_DIG_FORCE_V 0x1
|
|
#define SENS_DAC_DIG_FORCE_S 22
|
|
/* SENS_DEBUG_BIT_SEL : R/W ;bitpos:[21:17] ;default: 5'b0 ; */
|
|
/*description: */
|
|
#define SENS_DEBUG_BIT_SEL 0x0000001F
|
|
#define SENS_DEBUG_BIT_SEL_M ((SENS_DEBUG_BIT_SEL_V)<<(SENS_DEBUG_BIT_SEL_S))
|
|
#define SENS_DEBUG_BIT_SEL_V 0x1F
|
|
#define SENS_DEBUG_BIT_SEL_S 17
|
|
/* SENS_SW_TONE_EN : R/W ;bitpos:[16] ;default: 1'b0 ; */
|
|
/*description: 1: enable CW generator 0: disable CW generator*/
|
|
#define SENS_SW_TONE_EN (BIT(16))
|
|
#define SENS_SW_TONE_EN_M (BIT(16))
|
|
#define SENS_SW_TONE_EN_V 0x1
|
|
#define SENS_SW_TONE_EN_S 16
|
|
/* SENS_SW_FSTEP : R/W ;bitpos:[15:0] ;default: 16'b0 ; */
|
|
/*description: frequency step for CW generator can be used to adjust the frequency*/
|
|
#define SENS_SW_FSTEP 0x0000FFFF
|
|
#define SENS_SW_FSTEP_M ((SENS_SW_FSTEP_V)<<(SENS_SW_FSTEP_S))
|
|
#define SENS_SW_FSTEP_V 0xFFFF
|
|
#define SENS_SW_FSTEP_S 0
|
|
|
|
#define SENS_SAR_DAC_CTRL2_REG (DR_REG_SENS_BASE + 0x009c)
|
|
/* SENS_DAC_CW_EN2 : R/W ;bitpos:[25] ;default: 1'b1 ; */
|
|
/*description: 1: to select CW generator as source to PDAC2_DAC[7:0] 0: to
|
|
select register reg_pdac2_dac[7:0] as source to PDAC2_DAC[7:0]*/
|
|
#define SENS_DAC_CW_EN2 (BIT(25))
|
|
#define SENS_DAC_CW_EN2_M (BIT(25))
|
|
#define SENS_DAC_CW_EN2_V 0x1
|
|
#define SENS_DAC_CW_EN2_S 25
|
|
/* SENS_DAC_CW_EN1 : R/W ;bitpos:[24] ;default: 1'b1 ; */
|
|
/*description: 1: to select CW generator as source to PDAC1_DAC[7:0] 0: to
|
|
select register reg_pdac1_dac[7:0] as source to PDAC1_DAC[7:0]*/
|
|
#define SENS_DAC_CW_EN1 (BIT(24))
|
|
#define SENS_DAC_CW_EN1_M (BIT(24))
|
|
#define SENS_DAC_CW_EN1_V 0x1
|
|
#define SENS_DAC_CW_EN1_S 24
|
|
/* SENS_DAC_INV2 : R/W ;bitpos:[23:22] ;default: 2'b0 ; */
|
|
/*description: 00: do not invert any bits 01: invert all bits 10: invert MSB
|
|
11: invert all bits except MSB*/
|
|
#define SENS_DAC_INV2 0x00000003
|
|
#define SENS_DAC_INV2_M ((SENS_DAC_INV2_V)<<(SENS_DAC_INV2_S))
|
|
#define SENS_DAC_INV2_V 0x3
|
|
#define SENS_DAC_INV2_S 22
|
|
/* SENS_DAC_INV1 : R/W ;bitpos:[21:20] ;default: 2'b0 ; */
|
|
/*description: 00: do not invert any bits 01: invert all bits 10: invert MSB
|
|
11: invert all bits except MSB*/
|
|
#define SENS_DAC_INV1 0x00000003
|
|
#define SENS_DAC_INV1_M ((SENS_DAC_INV1_V)<<(SENS_DAC_INV1_S))
|
|
#define SENS_DAC_INV1_V 0x3
|
|
#define SENS_DAC_INV1_S 20
|
|
/* SENS_DAC_SCALE2 : R/W ;bitpos:[19:18] ;default: 2'b0 ; */
|
|
/*description: 00: no scale 01: scale to 1/2 10: scale to 1/4 scale to 1/8*/
|
|
#define SENS_DAC_SCALE2 0x00000003
|
|
#define SENS_DAC_SCALE2_M ((SENS_DAC_SCALE2_V)<<(SENS_DAC_SCALE2_S))
|
|
#define SENS_DAC_SCALE2_V 0x3
|
|
#define SENS_DAC_SCALE2_S 18
|
|
/* SENS_DAC_SCALE1 : R/W ;bitpos:[17:16] ;default: 2'b0 ; */
|
|
/*description: 00: no scale 01: scale to 1/2 10: scale to 1/4 scale to 1/8*/
|
|
#define SENS_DAC_SCALE1 0x00000003
|
|
#define SENS_DAC_SCALE1_M ((SENS_DAC_SCALE1_V)<<(SENS_DAC_SCALE1_S))
|
|
#define SENS_DAC_SCALE1_V 0x3
|
|
#define SENS_DAC_SCALE1_S 16
|
|
/* SENS_DAC_DC2 : R/W ;bitpos:[15:8] ;default: 8'b0 ; */
|
|
/*description: DC offset for DAC2 CW generator*/
|
|
#define SENS_DAC_DC2 0x000000FF
|
|
#define SENS_DAC_DC2_M ((SENS_DAC_DC2_V)<<(SENS_DAC_DC2_S))
|
|
#define SENS_DAC_DC2_V 0xFF
|
|
#define SENS_DAC_DC2_S 8
|
|
/* SENS_DAC_DC1 : R/W ;bitpos:[7:0] ;default: 8'b0 ; */
|
|
/*description: DC offset for DAC1 CW generator*/
|
|
#define SENS_DAC_DC1 0x000000FF
|
|
#define SENS_DAC_DC1_M ((SENS_DAC_DC1_V)<<(SENS_DAC_DC1_S))
|
|
#define SENS_DAC_DC1_V 0xFF
|
|
#define SENS_DAC_DC1_S 0
|
|
|
|
#define SENS_SAR_MEAS_CTRL2_REG (DR_REG_SENS_BASE + 0x0a0)
|
|
/* SENS_AMP_SHORT_REF_GND_FORCE : R/W ;bitpos:[18:17] ;default: 2'b0 ; */
|
|
/*description: */
|
|
#define SENS_AMP_SHORT_REF_GND_FORCE 0x00000003
|
|
#define SENS_AMP_SHORT_REF_GND_FORCE_M ((SENS_AMP_SHORT_REF_GND_FORCE_V)<<(SENS_AMP_SHORT_REF_GND_FORCE_S))
|
|
#define SENS_AMP_SHORT_REF_GND_FORCE_V 0x3
|
|
#define SENS_AMP_SHORT_REF_GND_FORCE_S 17
|
|
/* SENS_AMP_SHORT_REF_FORCE : R/W ;bitpos:[16:15] ;default: 2'b0 ; */
|
|
/*description: */
|
|
#define SENS_AMP_SHORT_REF_FORCE 0x00000003
|
|
#define SENS_AMP_SHORT_REF_FORCE_M ((SENS_AMP_SHORT_REF_FORCE_V)<<(SENS_AMP_SHORT_REF_FORCE_S))
|
|
#define SENS_AMP_SHORT_REF_FORCE_V 0x3
|
|
#define SENS_AMP_SHORT_REF_FORCE_S 15
|
|
/* SENS_AMP_RST_FB_FORCE : R/W ;bitpos:[14:13] ;default: 2'b0 ; */
|
|
/*description: */
|
|
#define SENS_AMP_RST_FB_FORCE 0x00000003
|
|
#define SENS_AMP_RST_FB_FORCE_M ((SENS_AMP_RST_FB_FORCE_V)<<(SENS_AMP_RST_FB_FORCE_S))
|
|
#define SENS_AMP_RST_FB_FORCE_V 0x3
|
|
#define SENS_AMP_RST_FB_FORCE_S 13
|
|
/* SENS_SAR2_RSTB_FORCE : R/W ;bitpos:[12:11] ;default: 2'b0 ; */
|
|
/*description: */
|
|
#define SENS_SAR2_RSTB_FORCE 0x00000003
|
|
#define SENS_SAR2_RSTB_FORCE_M ((SENS_SAR2_RSTB_FORCE_V)<<(SENS_SAR2_RSTB_FORCE_S))
|
|
#define SENS_SAR2_RSTB_FORCE_V 0x3
|
|
#define SENS_SAR2_RSTB_FORCE_S 11
|
|
/* SENS_SAR_RSTB_FSM_IDLE : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define SENS_SAR_RSTB_FSM_IDLE (BIT(10))
|
|
#define SENS_SAR_RSTB_FSM_IDLE_M (BIT(10))
|
|
#define SENS_SAR_RSTB_FSM_IDLE_V 0x1
|
|
#define SENS_SAR_RSTB_FSM_IDLE_S 10
|
|
/* SENS_XPD_SAR_FSM_IDLE : R/W ;bitpos:[9] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define SENS_XPD_SAR_FSM_IDLE (BIT(9))
|
|
#define SENS_XPD_SAR_FSM_IDLE_M (BIT(9))
|
|
#define SENS_XPD_SAR_FSM_IDLE_V 0x1
|
|
#define SENS_XPD_SAR_FSM_IDLE_S 9
|
|
/* SENS_AMP_SHORT_REF_GND_FSM_IDLE : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define SENS_AMP_SHORT_REF_GND_FSM_IDLE (BIT(8))
|
|
#define SENS_AMP_SHORT_REF_GND_FSM_IDLE_M (BIT(8))
|
|
#define SENS_AMP_SHORT_REF_GND_FSM_IDLE_V 0x1
|
|
#define SENS_AMP_SHORT_REF_GND_FSM_IDLE_S 8
|
|
/* SENS_AMP_SHORT_REF_FSM_IDLE : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define SENS_AMP_SHORT_REF_FSM_IDLE (BIT(7))
|
|
#define SENS_AMP_SHORT_REF_FSM_IDLE_M (BIT(7))
|
|
#define SENS_AMP_SHORT_REF_FSM_IDLE_V 0x1
|
|
#define SENS_AMP_SHORT_REF_FSM_IDLE_S 7
|
|
/* SENS_AMP_RST_FB_FSM_IDLE : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define SENS_AMP_RST_FB_FSM_IDLE (BIT(6))
|
|
#define SENS_AMP_RST_FB_FSM_IDLE_M (BIT(6))
|
|
#define SENS_AMP_RST_FB_FSM_IDLE_V 0x1
|
|
#define SENS_AMP_RST_FB_FSM_IDLE_S 6
|
|
/* SENS_XPD_SAR_AMP_FSM_IDLE : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define SENS_XPD_SAR_AMP_FSM_IDLE (BIT(5))
|
|
#define SENS_XPD_SAR_AMP_FSM_IDLE_M (BIT(5))
|
|
#define SENS_XPD_SAR_AMP_FSM_IDLE_V 0x1
|
|
#define SENS_XPD_SAR_AMP_FSM_IDLE_S 5
|
|
/* SENS_SAR1_DAC_XPD_FSM_IDLE : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define SENS_SAR1_DAC_XPD_FSM_IDLE (BIT(4))
|
|
#define SENS_SAR1_DAC_XPD_FSM_IDLE_M (BIT(4))
|
|
#define SENS_SAR1_DAC_XPD_FSM_IDLE_V 0x1
|
|
#define SENS_SAR1_DAC_XPD_FSM_IDLE_S 4
|
|
/* SENS_SAR1_DAC_XPD_FSM : R/W ;bitpos:[3:0] ;default: 4'b0011 ; */
|
|
/*description: */
|
|
#define SENS_SAR1_DAC_XPD_FSM 0x0000000F
|
|
#define SENS_SAR1_DAC_XPD_FSM_M ((SENS_SAR1_DAC_XPD_FSM_V)<<(SENS_SAR1_DAC_XPD_FSM_S))
|
|
#define SENS_SAR1_DAC_XPD_FSM_V 0xF
|
|
#define SENS_SAR1_DAC_XPD_FSM_S 0
|
|
|
|
#define SENS_SAR_NOUSE_REG (DR_REG_SENS_BASE + 0x00F8)
|
|
/* SENS_SAR_NOUSE : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
|
|
/*description: */
|
|
#define SENS_SAR_NOUSE 0xFFFFFFFF
|
|
#define SENS_SAR_NOUSE_M ((SENS_SAR_NOUSE_V)<<(SENS_SAR_NOUSE_S))
|
|
#define SENS_SAR_NOUSE_V 0xFFFFFFFF
|
|
#define SENS_SAR_NOUSE_S 0
|
|
|
|
#define SENS_SARDATE_REG (DR_REG_SENS_BASE + 0x00FC)
|
|
/* SENS_SAR_DATE : R/W ;bitpos:[27:0] ;default: 28'h1605180 ; */
|
|
/*description: */
|
|
#define SENS_SAR_DATE 0x0FFFFFFF
|
|
#define SENS_SAR_DATE_M ((SENS_SAR_DATE_V)<<(SENS_SAR_DATE_S))
|
|
#define SENS_SAR_DATE_V 0xFFFFFFF
|
|
#define SENS_SAR_DATE_S 0
|
|
|
|
|
|
|
|
|
|
#endif /*_SOC_SENS_REG_H_ */
|
|
|
|
|