54 lines
No EOL
2.1 KiB
ReStructuredText
54 lines
No EOL
2.1 KiB
ReStructuredText
***************************************
|
||
Building OpenOCD from Sources for MacOS
|
||
***************************************
|
||
|
||
The following instructions are alternative to downloading binary OpenOCD from Espressif website. To quickly setup the binary OpenOCD, instead of compiling it yourself, backup and proceed to section :doc:`setup-openocd-macos`.
|
||
|
||
.. highlight:: bash
|
||
|
||
Download Sources of OpenOCD
|
||
===========================
|
||
|
||
The sources for the ESP32-enabled variant of OpenOCD are available from Espressif GitHub under https://github.com/espressif/openocd-esp32. To download the sources, use the following commands::
|
||
|
||
cd ~/esp
|
||
git clone –recursive https://github.com/espressif/openocd-esp32.git
|
||
|
||
The clone of sources should be now saved in ``~/esp/openocd-esp32`` directory.
|
||
|
||
|
||
Install Dependencies
|
||
====================
|
||
|
||
Install packages that are required to compile OpenOCD using Homebrew::
|
||
|
||
brew install automake libtool libusb wget gcc@4.9
|
||
|
||
Build OpenOCD
|
||
=============
|
||
|
||
Proceed with configuring and building OpenOCD::
|
||
|
||
cd ~/esp/openocd-esp32
|
||
./bootstrap
|
||
./configure
|
||
make
|
||
|
||
Optionally you can add ``sudo make install`` step at the end. Skip it, if you have an existing OpenOCD (from e.g. another development platform), as it may get overwritten.
|
||
|
||
.. note::
|
||
|
||
* Should an error occur, resolve it and try again until the command ``make`` works.
|
||
* If there is a submodule problem from OpenOCD, please ``cd`` to the ``openocd-esp32`` directory and input ``git submodule update --init``.
|
||
* If the ``./configure`` is successfully run, information of enabled JTAG will be printed under ``OpenOCD configuration summary``.
|
||
* If the information of your device is not shown in the log, use ``./configure`` to enable it as described in ``../openocd-esp32/doc/INSTALL.txt``.
|
||
* For details concerning compiling OpenOCD, please refer to ``openocd-esp32/README.OSX``.
|
||
|
||
Once ``make`` process is successfully completed, the executable of OpenOCD will be saved in ``~/esp/openocd-esp32/src/openocd`` directory.
|
||
|
||
Next Steps
|
||
==========
|
||
|
||
To carry on with debugging environment setup, proceed to section :ref:`jtag-debugging-configuring-esp32-target`.
|
||
|
||
|