OVMS3-idf/components/driver/include/driver/timer.h
2020-02-07 16:37:45 +11:00

440 lines
15 KiB
C

// Copyright 2010-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "esp_err.h"
#include "esp_attr.h"
#include "soc/soc.h"
#include "soc/timer_periph.h"
#include "esp_intr_alloc.h"
#include "hal/timer_types.h"
#ifdef __cplusplus
extern "C" {
#endif
#define TIMER_BASE_CLK (APB_CLK_FREQ) /*!< Frequency of the clock on the input of the timer groups */
typedef void (*timer_isr_t)(void *);
/**
* @brief Interrupt handle, used in order to free the isr after use.
* Aliases to an int handle for now.
*/
typedef intr_handle_t timer_isr_handle_t;
/**
* @brief Read the counter value of hardware timer.
*
* @param group_num Timer group, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
* @param timer_val Pointer to accept timer counter value.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_get_counter_value(timer_group_t group_num, timer_idx_t timer_num, uint64_t *timer_val);
/**
* @brief Read the counter value of hardware timer, in unit of a given scale.
*
* @param group_num Timer group, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
* @param time Pointer, type of double*, to accept timer counter value, in seconds.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_get_counter_time_sec(timer_group_t group_num, timer_idx_t timer_num, double *time);
/**
* @brief Set counter value to hardware timer.
*
* @param group_num Timer group, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
* @param load_val Counter value to write to the hardware timer.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_set_counter_value(timer_group_t group_num, timer_idx_t timer_num, uint64_t load_val);
/**
* @brief Start the counter of hardware timer.
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_start(timer_group_t group_num, timer_idx_t timer_num);
/**
* @brief Pause the counter of hardware timer.
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_pause(timer_group_t group_num, timer_idx_t timer_num);
/**
* @brief Set counting mode for hardware timer.
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
* @param counter_dir Counting direction of timer, count-up or count-down
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_set_counter_mode(timer_group_t group_num, timer_idx_t timer_num, timer_count_dir_t counter_dir);
/**
* @brief Enable or disable counter reload function when alarm event occurs.
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
* @param reload Counter reload mode.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_set_auto_reload(timer_group_t group_num, timer_idx_t timer_num, timer_autoreload_t reload);
/**
* @brief Set hardware timer source clock divider. Timer groups clock are divider from APB clock.
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
* @param divider Timer clock divider value. The divider's range is from from 2 to 65536.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_set_divider(timer_group_t group_num, timer_idx_t timer_num, uint32_t divider);
/**
* @brief Set timer alarm value.
*
* @param group_num Timer group, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
* @param alarm_value A 64-bit value to set the alarm value.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_set_alarm_value(timer_group_t group_num, timer_idx_t timer_num, uint64_t alarm_value);
/**
* @brief Get timer alarm value.
*
* @param group_num Timer group, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
* @param alarm_value Pointer of A 64-bit value to accept the alarm value.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_get_alarm_value(timer_group_t group_num, timer_idx_t timer_num, uint64_t *alarm_value);
/**
* @brief Enable or disable generation of timer alarm events.
*
* @param group_num Timer group, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
* @param alarm_en To enable or disable timer alarm function.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_set_alarm(timer_group_t group_num, timer_idx_t timer_num, timer_alarm_t alarm_en);
/**
* @brief Add ISR handle callback for the corresponding timer.
*
* @param group_num Timer group number
* @param timer_num Timer index of timer group
* @param isr_handler Interrupt handler function, it is a callback function.
* @param arg Parameter for handler function
* @param intr_alloc_flags Flags used to allocate the interrupt. One or multiple (ORred)
* ESP_INTR_FLAG_* values. See esp_intr_alloc.h for more info.
*
* @note This ISR handler will be called from an ISR.
* This ISR handler do not need to handle interrupt status, and should be kept short.
* If you want to realize some specific applications or write the whole ISR, you can
* call timer_isr_register(...) to register ISR.
*
* If the intr_alloc_flags value ESP_INTR_FLAG_IRAM is set,
* the handler function must be declared with IRAM_ATTR attribute
* and can only call functions in IRAM or ROM. It cannot call other timer APIs.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_isr_callback_add(timer_group_t group_num, timer_idx_t timer_num, timer_isr_t isr_handler, void *arg, int intr_alloc_flags);
/**
* @brief Remove ISR handle callback for the corresponding timer.
*
* @param group_num Timer group number
* @param timer_num Timer index of timer group
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_isr_callback_remove(timer_group_t group_num, timer_idx_t timer_num);
/**
* @brief Register Timer interrupt handler, the handler is an ISR.
* The handler will be attached to the same CPU core that this function is running on.
*
* @param group_num Timer group number
* @param timer_num Timer index of timer group
* @param fn Interrupt handler function.
* @param arg Parameter for handler function
* @param intr_alloc_flags Flags used to allocate the interrupt. One or multiple (ORred)
* ESP_INTR_FLAG_* values. See esp_intr_alloc.h for more info.
* @param handle Pointer to return handle. If non-NULL, a handle for the interrupt will
* be returned here.
*
* @note If use this function to reigster ISR, you need to write the whole ISR.
* In the interrupt handler, you need to call timer_spinlock_take(..) before
* your handling, and call timer_spinlock_give(...) after your handling.
*
* If the intr_alloc_flags value ESP_INTR_FLAG_IRAM is set,
* the handler function must be declared with IRAM_ATTR attribute
* and can only call functions in IRAM or ROM. It cannot call other timer APIs.
* Use direct register access to configure timers from inside the ISR in this case.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_isr_register(timer_group_t group_num, timer_idx_t timer_num, void (*fn)(void *), void *arg, int intr_alloc_flags, timer_isr_handle_t *handle);
/** @brief Initializes and configure the timer.
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
* @param config Pointer to timer initialization parameters.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_init(timer_group_t group_num, timer_idx_t timer_num, const timer_config_t *config);
/** @brief Deinitializes the timer.
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_deinit(timer_group_t group_num, timer_idx_t timer_num);
/** @brief Get timer configure value.
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index, 0 for hw_timer[0] & 1 for hw_timer[1]
* @param config Pointer of struct to accept timer parameters.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_get_config(timer_group_t group_num, timer_idx_t timer_num, timer_config_t *config);
/** @brief Enable timer group interrupt, by enable mask
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param intr_mask Timer interrupt enable mask.
* - TIMER_INTR_T0: t0 interrupt
* - TIMER_INTR_T1: t1 interrupt
* - TIMER_INTR_WDT: watchdog interrupt
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_group_intr_enable(timer_group_t group_num, timer_intr_t intr_mask);
/** @brief Disable timer group interrupt, by disable mask
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param intr_mask Timer interrupt disable mask.
* - TIMER_INTR_T0: t0 interrupt
* - TIMER_INTR_T1: t1 interrupt
* - TIMER_INTR_WDT: watchdog interrupt
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_group_intr_disable(timer_group_t group_num, timer_intr_t intr_mask);
/** @brief Enable timer interrupt
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_enable_intr(timer_group_t group_num, timer_idx_t timer_num);
/** @brief Disable timer interrupt
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_disable_intr(timer_group_t group_num, timer_idx_t timer_num);
/** @brief Clear timer interrupt status, just used in ISR
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index.
*
*/
void timer_group_intr_clr_in_isr(timer_group_t group_num, timer_idx_t timer_num) __attribute__((deprecated));
/** @brief Clear timer interrupt status, just used in ISR
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index.
*
*/
void timer_group_clr_intr_status_in_isr(timer_group_t group_num, timer_idx_t timer_num);
/** @brief Enable alarm interrupt, just used in ISR
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index.
*
*/
void timer_group_enable_alarm_in_isr(timer_group_t group_num, timer_idx_t timer_num);
/** @brief Get the current counter value, just used in ISR
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index.
*
* @return
* - Counter value
*/
uint64_t timer_group_get_counter_value_in_isr(timer_group_t group_num, timer_idx_t timer_num);
/** @brief Set the alarm threshold for the timer, just used in ISR
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index.
* @param alarm_val Alarm threshold.
*
*/
void timer_group_set_alarm_value_in_isr(timer_group_t group_num, timer_idx_t timer_num, uint64_t alarm_val);
/** @brief Enable/disable a counter, just used in ISR
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index.
* @param counter_en Enable/disable.
*
*/
void timer_group_set_counter_enable_in_isr(timer_group_t group_num, timer_idx_t timer_num, timer_start_t counter_en);
/** @brief Get the masked interrupt status, just used in ISR
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
*
* @return
* - Interrupt status
*/
timer_intr_t timer_group_intr_get_in_isr(timer_group_t group_num) __attribute__((deprecated));
/** @brief Get interrupt status, just used in ISR
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
*
* @return
* - Interrupt status
*/
uint32_t timer_group_get_intr_status_in_isr(timer_group_t group_num);
/** @brief Clear the masked interrupt status, just used in ISR
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param intr_mask Masked interrupt.
*
*/
void timer_group_clr_intr_sta_in_isr(timer_group_t group_num, timer_intr_t intr_mask) __attribute__((deprecated));
/** @brief Get auto reload enable status, just used in ISR
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
* @param timer_num Timer index
*
* @return
* - True Auto reload enabled
* - False Auto reload disabled
*/
bool timer_group_get_auto_reload_in_isr(timer_group_t group_num, timer_idx_t timer_num);
/** @brief Take timer spinlock to enter critical protect
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_spinlock_take(timer_group_t group_num);
/** @brief Give timer spinlock to exit critical protect
*
* @param group_num Timer group number, 0 for TIMERG0 or 1 for TIMERG1
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t timer_spinlock_give(timer_group_t group_num);
#ifdef __cplusplus
}
#endif