OVMS3-idf/components/newlib/time.c
Ivan Grokhotkov 8ccb2a4990 esp32: make time monotonic across resets
Small changes to clock calibration value will cause increasing errors
the longer the device runs. Consider the case of deep sleep, assuming
that RTC counter is used for timekeeping:
- before sleep:
   time_before = rtc_counter * calibration_val
- after sleep:
   time_after = (rtc_counter + sleep_count) * (calibration_val + epsilon)
where 'epsilon' is a small estimation error of 'calibration_val'.
The apparent sleep duration thus will be:
time_after - time_before = sleep_count * (calibration_val + epsilon)
                           + rtc_counter * epsilon

Second term on the right hand side is the error in time difference
estimation, it is proportional to the total system runtime (rtc_counter).

To avoid this issue, this change makes RTC_SLOW_CLK calibration value
persistent across restarts. This allows the calibration value update to
be preformed, while keeping time after update same as before the update.
2017-06-16 12:06:04 +08:00

272 lines
8.3 KiB
C

// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <errno.h>
#include <stdlib.h>
#include <time.h>
#include <reent.h>
#include <sys/types.h>
#include <sys/reent.h>
#include <sys/time.h>
#include <sys/times.h>
#include <sys/lock.h>
#include <rom/rtc.h>
#include "esp_attr.h"
#include "esp_intr_alloc.h"
#include "esp_clk.h"
#include "soc/soc.h"
#include "soc/rtc.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/frc_timer_reg.h"
#include "rom/ets_sys.h"
#include "freertos/FreeRTOS.h"
#include "freertos/xtensa_api.h"
#include "freertos/task.h"
#include "sdkconfig.h"
#if defined( CONFIG_ESP32_TIME_SYSCALL_USE_RTC ) || defined( CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1 )
#define WITH_RTC 1
#endif
#if defined( CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 ) || defined( CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1 )
#define WITH_FRC1 1
#endif
#ifdef WITH_RTC
static uint64_t get_rtc_time_us()
{
const uint64_t ticks = rtc_time_get();
const uint32_t cal = esp_clk_slowclk_cal_get();
/* RTC counter result is up to 2^48, calibration factor is up to 2^24,
* for a 32kHz clock. We need to calculate (assuming no overflow):
* (ticks * cal) >> RTC_CLK_CAL_FRACT
*
* An overflow in the (ticks * cal) multiplication would cause time to
* wrap around after approximately 13 days, which is probably not enough
* for some applications.
* Therefore multiplication is split into two terms, for the lower 32-bit
* and the upper 16-bit parts of "ticks", i.e.:
* ((ticks_low + 2^32 * ticks_high) * cal) >> RTC_CLK_CAL_FRACT
*/
const uint64_t ticks_low = ticks & UINT32_MAX;
const uint64_t ticks_high = ticks >> 32;
return ((ticks_low * cal) >> RTC_CLK_CAL_FRACT) +
((ticks_high * cal) << (32 - RTC_CLK_CAL_FRACT));
}
#endif // WITH_RTC
// s_boot_time: time from Epoch to the first boot time
#ifdef WITH_RTC
// when RTC is used to persist time, two RTC_STORE registers are used to store boot time
#elif defined(WITH_FRC1)
static uint64_t s_boot_time;
#endif
#if defined(WITH_RTC) || defined(WITH_FRC1)
static _lock_t s_boot_time_lock;
#endif
#ifdef WITH_FRC1
#define FRC1_PRESCALER 16
#define FRC1_PRESCALER_CTL 2
#define FRC1_TICK_FREQ (APB_CLK_FREQ / FRC1_PRESCALER)
#define FRC1_TICKS_PER_US (FRC1_TICK_FREQ / 1000000)
#define FRC1_ISR_PERIOD_US (FRC_TIMER_LOAD_VALUE(0) / FRC1_TICKS_PER_US)
// Counter frequency will be APB_CLK_FREQ / 16 = 5 MHz
// 1 tick = 0.2 us
// Timer has 23 bit counter, so interrupt will fire each 1677721.6 microseconds.
// This is not a whole number, so timer will drift by 0.3 ppm due to rounding error.
static volatile uint64_t s_microseconds = 0;
static void IRAM_ATTR frc_timer_isr()
{
// Write to FRC_TIMER_INT_REG may not take effect in some cases (root cause TBD)
// This extra write works around this issue.
// FRC_TIMER_LOAD_REG(0) is used here, but any other DPORT register address can also be used.
WRITE_PERI_REG(FRC_TIMER_LOAD_REG(0), FRC_TIMER_LOAD_VALUE(0));
WRITE_PERI_REG(FRC_TIMER_INT_REG(0), FRC_TIMER_INT_CLR);
s_microseconds += FRC1_ISR_PERIOD_US;
}
#endif // WITH_FRC1
#if defined(WITH_RTC) || defined(WITH_FRC1)
static void set_boot_time(uint64_t time_us)
{
_lock_acquire(&s_boot_time_lock);
#ifdef WITH_RTC
REG_WRITE(RTC_BOOT_TIME_LOW_REG, (uint32_t) (time_us & 0xffffffff));
REG_WRITE(RTC_BOOT_TIME_HIGH_REG, (uint32_t) (time_us >> 32));
#else
s_boot_time = time_us;
#endif
_lock_release(&s_boot_time_lock);
}
static uint64_t get_boot_time()
{
uint64_t result;
_lock_acquire(&s_boot_time_lock);
#ifdef WITH_RTC
result = ((uint64_t) REG_READ(RTC_BOOT_TIME_LOW_REG)) + (((uint64_t) REG_READ(RTC_BOOT_TIME_HIGH_REG)) << 32);
#else
result = s_boot_time;
#endif
_lock_release(&s_boot_time_lock);
return result;
}
#endif //defined(WITH_RTC) || defined(WITH_FRC1)
void esp_clk_slowclk_cal_set(uint32_t new_cal)
{
#if defined(WITH_RTC)
/* To force monotonic time values even when clock calibration value changes,
* we adjust boot time, given current time and the new calibration value:
* T = boot_time_old + cur_cal * ticks / 2^19
* T = boot_time_adj + new_cal * ticks / 2^19
* which results in:
* boot_time_adj = boot_time_old + ticks * (cur_cal - new_cal) / 2^19
*/
const int64_t ticks = (int64_t) rtc_time_get();
const uint32_t cur_cal = REG_READ(RTC_SLOW_CLK_CAL_REG);
int32_t cal_diff = (int32_t) (cur_cal - new_cal);
int64_t boot_time_diff = ticks * cal_diff / (1LL << RTC_CLK_CAL_FRACT);
uint64_t boot_time_adj = get_boot_time() + boot_time_diff;
set_boot_time(boot_time_adj);
#endif // WITH_RTC
REG_WRITE(RTC_SLOW_CLK_CAL_REG, new_cal);
}
uint32_t esp_clk_slowclk_cal_get()
{
return REG_READ(RTC_SLOW_CLK_CAL_REG);
}
void esp_setup_time_syscalls()
{
#if defined( WITH_FRC1 )
#if defined( WITH_RTC )
// initialize time from RTC clock
s_microseconds = get_rtc_time_us();
#endif //WITH_RTC
// set up timer
WRITE_PERI_REG(FRC_TIMER_CTRL_REG(0), \
FRC_TIMER_AUTOLOAD | \
(FRC1_PRESCALER_CTL << FRC_TIMER_PRESCALER_S) | \
FRC_TIMER_EDGE_INT);
WRITE_PERI_REG(FRC_TIMER_LOAD_REG(0), FRC_TIMER_LOAD_VALUE(0));
SET_PERI_REG_MASK(FRC_TIMER_CTRL_REG(0),
FRC_TIMER_ENABLE | \
FRC_TIMER_INT_ENABLE);
esp_intr_alloc(ETS_TIMER1_INTR_SOURCE, 0, &frc_timer_isr, NULL, NULL);
#endif // WITH_FRC1
}
clock_t IRAM_ATTR _times_r(struct _reent *r, struct tms *ptms)
{
clock_t t = xTaskGetTickCount() * (portTICK_PERIOD_MS * CLK_TCK / 1000);
ptms->tms_cstime = 0;
ptms->tms_cutime = 0;
ptms->tms_stime = t;
ptms->tms_utime = 0;
struct timeval tv = {0, 0};
_gettimeofday_r(r, &tv, NULL);
return (clock_t) tv.tv_sec;
}
#if defined( WITH_FRC1 ) || defined( WITH_RTC )
static uint64_t get_time_since_boot()
{
uint64_t microseconds = 0;
#ifdef WITH_FRC1
uint32_t timer_ticks_before = READ_PERI_REG(FRC_TIMER_COUNT_REG(0));
microseconds = s_microseconds;
uint32_t timer_ticks_after = READ_PERI_REG(FRC_TIMER_COUNT_REG(0));
if (timer_ticks_after > timer_ticks_before) {
// overflow happened at some point between getting
// timer_ticks_before and timer_ticks_after
// microseconds value is ambiguous, get a new one
microseconds = s_microseconds;
}
microseconds += (FRC_TIMER_LOAD_VALUE(0) - timer_ticks_after) / FRC1_TICKS_PER_US;
#elif defined(WITH_RTC)
microseconds = get_rtc_time_us();
#endif
return microseconds;
}
#endif // defined( WITH_FRC1 ) || defined( WITH_RTC )
int IRAM_ATTR _gettimeofday_r(struct _reent *r, struct timeval *tv, void *tz)
{
(void) tz;
#if defined( WITH_FRC1 ) || defined( WITH_RTC )
if (tv) {
uint64_t microseconds = get_boot_time() + get_time_since_boot();
tv->tv_sec = microseconds / 1000000;
tv->tv_usec = microseconds % 1000000;
}
return 0;
#else
__errno_r(r) = ENOSYS;
return -1;
#endif // defined( WITH_FRC1 ) || defined( WITH_RTC )
}
int settimeofday(const struct timeval *tv, const struct timezone *tz)
{
(void) tz;
#if defined( WITH_FRC1 ) || defined( WITH_RTC )
if (tv) {
uint64_t now = ((uint64_t) tv->tv_sec) * 1000000LL + tv->tv_usec;
uint64_t since_boot = get_time_since_boot();
set_boot_time(now - since_boot);
}
return 0;
#else
errno = ENOSYS;
return -1;
#endif
}
uint32_t system_get_time(void)
{
#if defined( WITH_FRC1 ) || defined( WITH_RTC )
return get_time_since_boot();
#else
return 0;
#endif
}
uint32_t system_get_current_time(void) __attribute__((alias("system_get_time")));
uint32_t system_relative_time(uint32_t current_time)
{
return system_get_time() - current_time;
}
uint64_t system_get_rtc_time(void)
{
#ifdef WITH_RTC
return get_rtc_time_us();
#else
return 0;
#endif
}