218 lines
8 KiB
C
218 lines
8 KiB
C
// Copyright 2010-2019 Espressif Systems (Shanghai) PTE LTD
|
||
//
|
||
// Licensed under the Apache License, Version 2.0 (the "License");
|
||
// you may not use this file except in compliance with the License.
|
||
// You may obtain a copy of the License at
|
||
//
|
||
// http://www.apache.org/licenses/LICENSE-2.0
|
||
//
|
||
// Unless required by applicable law or agreed to in writing, software
|
||
// distributed under the License is distributed on an "AS IS" BASIS,
|
||
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||
// See the License for the specific language governing permissions and
|
||
// limitations under the License.
|
||
|
||
/*******************************************************************************
|
||
* NOTICE
|
||
* The HAL is not public api, don't use in application code.
|
||
* See readme.md in soc/include/hal/readme.md
|
||
******************************************************************************/
|
||
|
||
// The HAL layer for SPI Flash (common part)
|
||
|
||
#pragma once
|
||
|
||
#include "hal/spi_flash_ll.h"
|
||
#include "hal/spi_types.h"
|
||
#include "hal/spi_flash_types.h"
|
||
#include "soc/soc_memory_layout.h"
|
||
|
||
/* Hardware host-specific constants */
|
||
#define SPI_FLASH_HAL_MAX_WRITE_BYTES 64
|
||
#define SPI_FLASH_HAL_MAX_READ_BYTES 64
|
||
|
||
/**
|
||
* Generic driver context structure for all chips using the SPI peripheral.
|
||
* Include this into the HEAD of the driver data for other driver
|
||
* implementations that also use the SPI peripheral.
|
||
*/
|
||
typedef struct {
|
||
spi_dev_t *spi; ///< Pointer to SPI peripheral registers (SP1, SPI2 or SPI3). Set before initialisation.
|
||
int cs_num; ///< Which cs pin is used, 0-2.
|
||
int extra_dummy;
|
||
spi_flash_ll_clock_reg_t clock_conf;
|
||
} spi_flash_memspi_data_t;
|
||
|
||
/// Configuration structure for the SPI driver.
|
||
typedef struct {
|
||
spi_host_device_t host_id; ///< SPI peripheral ID.
|
||
int cs_num; ///< Which cs pin is used, 0-2.
|
||
bool iomux; ///< Whether the IOMUX is used, used for timing compensation.
|
||
int input_delay_ns; ///< Input delay on the MISO pin after the launch clock, used for timing compensation.
|
||
esp_flash_speed_t speed;///< SPI flash clock speed to work at.
|
||
} spi_flash_memspi_config_t;
|
||
|
||
/**
|
||
* Configure SPI flash hal settings.
|
||
*
|
||
* @param data Buffer to hold configured data, the buffer should be in DRAM to be available when cache disabled
|
||
* @param cfg Configurations to set
|
||
*
|
||
* @return
|
||
* - ESP_OK: success
|
||
* - ESP_ERR_INVALID_ARG: the data buffer is not in the DRAM.
|
||
*/
|
||
esp_err_t spi_flash_hal_init(spi_flash_memspi_data_t *data_out, const spi_flash_memspi_config_t *cfg);
|
||
|
||
/**
|
||
* Configure the device-related register before transactions.
|
||
*
|
||
* @param driver The driver context.
|
||
*
|
||
* @return always return ESP_OK.
|
||
*/
|
||
esp_err_t spi_flash_hal_device_config(spi_flash_host_driver_t *driver);
|
||
|
||
/**
|
||
* Send an user-defined spi transaction to the device.
|
||
*
|
||
* @note This is usually used when the memspi interface doesn't support some
|
||
* particular commands. Since this function supports timing compensation, it is
|
||
* also used to receive some data when the frequency is high.
|
||
*
|
||
* @param driver The driver context.
|
||
* @param trans The transaction to send, also holds the received data.
|
||
*
|
||
* @return always return ESP_OK.
|
||
*/
|
||
esp_err_t spi_flash_hal_common_command(spi_flash_host_driver_t *driver, spi_flash_trans_t *trans);
|
||
|
||
/**
|
||
* Erase whole flash chip by using the erase chip (C7h) command.
|
||
*
|
||
* @param driver The driver context.
|
||
*/
|
||
void spi_flash_hal_erase_chip(spi_flash_host_driver_t *driver);
|
||
|
||
/**
|
||
* Erase a specific sector by its start address through the sector erase (20h)
|
||
* command.
|
||
*
|
||
* @param driver The driver context.
|
||
* @param start_address Start address of the sector to erase.
|
||
*/
|
||
void spi_flash_hal_erase_sector(spi_flash_host_driver_t *driver, uint32_t start_address);
|
||
|
||
/**
|
||
* Erase a specific 64KB block by its start address through the 64KB block
|
||
* erase (D8h) command.
|
||
*
|
||
* @param driver The driver context.
|
||
* @param start_address Start address of the block to erase.
|
||
*/
|
||
void spi_flash_hal_erase_block(spi_flash_host_driver_t *driver, uint32_t start_address);
|
||
|
||
/**
|
||
* Program a page of the flash using the page program (02h) command.
|
||
*
|
||
* @param driver The driver context.
|
||
* @param address Address of the page to program
|
||
* @param buffer Data to program
|
||
* @param length Size of the buffer in bytes, no larger than ``SPI_FLASH_HAL_MAX_WRITE_BYTES`` (64) bytes.
|
||
*/
|
||
void spi_flash_hal_program_page(spi_flash_host_driver_t *driver, const void *buffer, uint32_t address, uint32_t length);
|
||
|
||
/**
|
||
* Read from the flash. Call ``spi_flash_hal_configure_host_read_mode`` to
|
||
* configure the read command before calling this function.
|
||
*
|
||
* @param driver The driver context.
|
||
* @param buffer Buffer to store the read data
|
||
* @param address Address to read
|
||
* @param length Length to read, no larger than ``SPI_FLASH_HAL_MAX_READ_BYTES`` (64) bytes.
|
||
*
|
||
* @return always return ESP_OK.
|
||
*/
|
||
esp_err_t spi_flash_hal_read(spi_flash_host_driver_t *driver, void *buffer, uint32_t address, uint32_t read_len);
|
||
|
||
/**
|
||
* @brief Send the write enable (06h) or write disable (04h) command to the flash chip.
|
||
*
|
||
* @param driver The driver context.
|
||
* @param wp true to enable the write protection, otherwise false.
|
||
*
|
||
* @return always return ESP_OK.
|
||
*/
|
||
esp_err_t spi_flash_hal_set_write_protect(spi_flash_host_driver_t *chip_drv, bool wp);
|
||
|
||
/**
|
||
* Check whether the SPI host is idle and can perform other operations.
|
||
*
|
||
* @param driver The driver context.
|
||
*
|
||
* @return ture if idle, otherwise false.
|
||
*/
|
||
bool spi_flash_hal_host_idle(spi_flash_host_driver_t *driver);
|
||
|
||
/**
|
||
* @brief Configure the SPI host hardware registers for the specified io mode.
|
||
*
|
||
* Note that calling this configures SPI host registers, so if running any
|
||
* other commands as part of set_io_mode() then these must be run before
|
||
* calling this function.
|
||
*
|
||
* The command value, address length and dummy cycles are configured according
|
||
* to the format of read commands:
|
||
*
|
||
* - command: 8 bits, value set.
|
||
* - address: 24 bits
|
||
* - dummy: cycles to compensate the input delay
|
||
* - out & in data: 0 bits.
|
||
*
|
||
* The following commands still need to:
|
||
*
|
||
* - Read data: set address value and data (length and contents), no need
|
||
* to touch command and dummy phases.
|
||
* - Common read: set command value, address value (or length to 0 if not used)
|
||
* - Common write: set command value, address value (or length to 0 if not
|
||
* used), disable dummy phase, and set output data.
|
||
*
|
||
* @param driver The driver context
|
||
* @param io_mode The HW read mode to use
|
||
* @param addr_bitlen Length of the address phase, in bits
|
||
* @param dummy_cyclelen_base Base cycles of the dummy phase, some extra dummy cycles may be appended to compensate the timing.
|
||
* @param command Actual reading command to send to flash chip on the bus.
|
||
*
|
||
* @return always return ESP_OK.
|
||
*/
|
||
esp_err_t spi_flash_hal_configure_host_io_mode(spi_flash_host_driver_t *driver, uint32_t command, uint32_t addr_bitlen,
|
||
int dummy_cyclelen_base, esp_flash_io_mode_t io_mode);
|
||
|
||
/**
|
||
* Poll until the last operation is done.
|
||
*
|
||
* @param driver The driver context.
|
||
*/
|
||
void spi_flash_hal_poll_cmd_done(spi_flash_host_driver_t *driver);
|
||
|
||
/**
|
||
* Check whether the given buffer can be used as the write buffer directly. If 'chip' is connected to the main SPI bus, we can only write directly from
|
||
* regions that are accessible ith cache disabled. *
|
||
*
|
||
* @param driver The driver context
|
||
* @param p The buffer holding data to send.
|
||
*
|
||
* @return True if the buffer can be used to send data, otherwise false.
|
||
*/
|
||
bool spi_flash_hal_supports_direct_write(spi_flash_host_driver_t *driver, const void *p);
|
||
|
||
/**
|
||
* Check whether the given buffer can be used as the read buffer directly. If 'chip' is connected to the main SPI bus, we can only read directly from
|
||
* regions that are accessible ith cache disabled. *
|
||
*
|
||
* @param driver The driver context
|
||
* @param p The buffer to hold the received data.
|
||
*
|
||
* @return True if the buffer can be used to receive data, otherwise false.
|
||
*/
|
||
bool spi_flash_hal_supports_direct_read(spi_flash_host_driver_t *driver, const void *p);
|