352 lines
11 KiB
C
352 lines
11 KiB
C
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
/*******************************************************************************
|
|
* NOTICE
|
|
* The ll is not public api, don't use in application code.
|
|
* See readme.md in soc/include/hal/readme.md
|
|
******************************************************************************/
|
|
|
|
// The Lowlevel layer for SPI Flash
|
|
|
|
#pragma once
|
|
|
|
#include <stdlib.h>
|
|
#include "soc/spi_periph.h"
|
|
#include "hal/spi_types.h"
|
|
#include "hal/spi_flash_types.h"
|
|
#include <sys/param.h> // For MIN/MAX
|
|
#include <stdbool.h>
|
|
#include <string.h>
|
|
|
|
|
|
//Supported clock register values
|
|
#define SPI_FLASH_LL_CLKREG_VAL_5MHZ ((spi_flash_ll_clock_reg_t){.val=0x0000F1CF}) ///< Clock set to 5 MHz
|
|
#define SPI_FLASH_LL_CLKREG_VAL_10MHZ ((spi_flash_ll_clock_reg_t){.val=0x000070C7}) ///< Clock set to 10 MHz
|
|
#define SPI_FLASH_LL_CLKREG_VAL_20MHZ ((spi_flash_ll_clock_reg_t){.val=0x00003043}) ///< Clock set to 20 MHz
|
|
#define SPI_FLASH_LL_CLKREG_VAL_26MHZ ((spi_flash_ll_clock_reg_t){.val=0x00002002}) ///< Clock set to 26 MHz
|
|
#define SPI_FLASH_LL_CLKREG_VAL_40MHZ ((spi_flash_ll_clock_reg_t){.val=0x00001001}) ///< Clock set to 40 MHz
|
|
#define SPI_FLASH_LL_CLKREG_VAL_80MHZ ((spi_flash_ll_clock_reg_t){.val=0x80000000}) ///< Clock set to 80 MHz
|
|
|
|
/// Get the start address of SPI peripheral registers by the host ID
|
|
#define spi_flash_ll_get_hw(host_id) ((host_id)==SPI1_HOST? &SPI1:((host_id)==SPI2_HOST?&SPI2:((host_id)==SPI3_HOST?&SPI3:({abort();(spi_dev_t*)0;}))))
|
|
|
|
/// type to store pre-calculated register value in above layers
|
|
typedef typeof(SPI1.clock) spi_flash_ll_clock_reg_t;
|
|
|
|
/*------------------------------------------------------------------------------
|
|
* Control
|
|
*----------------------------------------------------------------------------*/
|
|
/**
|
|
* Reset peripheral registers before configuration and starting control
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
*/
|
|
static inline void spi_flash_ll_reset(spi_dev_t *dev)
|
|
{
|
|
dev->user.val = 0;
|
|
dev->ctrl.val = 0;
|
|
}
|
|
|
|
/**
|
|
* Check whether the previous operation is done.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
*
|
|
* @return true if last command is done, otherwise false.
|
|
*/
|
|
static inline bool spi_flash_ll_cmd_is_done(const spi_dev_t *dev)
|
|
{
|
|
return (dev->cmd.val == 0);
|
|
}
|
|
|
|
/**
|
|
* Erase the flash chip.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
*/
|
|
static inline void spi_flash_ll_erase_chip(spi_dev_t *dev)
|
|
{
|
|
dev->cmd.flash_ce = 1;
|
|
}
|
|
|
|
/**
|
|
* Erase the sector, the address should be set by spi_flash_ll_set_address.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
*/
|
|
static inline void spi_flash_ll_erase_sector(spi_dev_t *dev)
|
|
{
|
|
dev->ctrl.val = 0;
|
|
dev->cmd.flash_se = 1;
|
|
}
|
|
|
|
/**
|
|
* Erase the block, the address should be set by spi_flash_ll_set_address.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
*/
|
|
static inline void spi_flash_ll_erase_block(spi_dev_t *dev)
|
|
{
|
|
dev->cmd.flash_be = 1;
|
|
}
|
|
|
|
/**
|
|
* Enable/disable write protection for the flash chip.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param wp true to enable the protection, false to disable (write enable).
|
|
*/
|
|
static inline void spi_flash_ll_set_write_protect(spi_dev_t *dev, bool wp)
|
|
{
|
|
if (wp) {
|
|
dev->cmd.flash_wrdi = 1;
|
|
} else {
|
|
dev->cmd.flash_wren = 1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Get the read data from the buffer after ``spi_flash_ll_read`` is done.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param buffer Buffer to hold the output data
|
|
* @param read_len Length to get out of the buffer
|
|
*/
|
|
static inline void spi_flash_ll_get_buffer_data(spi_dev_t *dev, void *buffer, uint32_t read_len)
|
|
{
|
|
if (((intptr_t)buffer % 4 == 0) && (read_len % 4 == 0)) {
|
|
// If everything is word-aligned, do a faster memcpy
|
|
memcpy(buffer, (void *)dev->data_buf, read_len);
|
|
} else {
|
|
// Otherwise, slow(er) path copies word by word
|
|
int copy_len = read_len;
|
|
for (int i = 0; i < (read_len + 3) / 4; i++) {
|
|
int word_len = MIN(sizeof(uint32_t), copy_len);
|
|
uint32_t word = dev->data_buf[i];
|
|
memcpy(buffer, &word, word_len);
|
|
buffer = (void *)((intptr_t)buffer + word_len);
|
|
copy_len -= word_len;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Write a word to the data buffer.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param word Data to write at address 0.
|
|
*/
|
|
static inline void spi_flash_ll_write_word(spi_dev_t *dev, uint32_t word)
|
|
{
|
|
dev->data_buf[0] = word;
|
|
}
|
|
|
|
/**
|
|
* Set the data to be written in the data buffer.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param buffer Buffer holding the data
|
|
* @param length Length of data in bytes.
|
|
*/
|
|
static inline void spi_flash_ll_set_buffer_data(spi_dev_t *dev, const void *buffer, uint32_t length)
|
|
{
|
|
// Load data registers, word at a time
|
|
int num_words = (length + 3) >> 2;
|
|
for (int i = 0; i < num_words; i++) {
|
|
uint32_t word = 0;
|
|
uint32_t word_len = MIN(length, sizeof(word));
|
|
memcpy(&word, buffer, word_len);
|
|
dev->data_buf[i] = word;
|
|
length -= word_len;
|
|
buffer = (void *)((intptr_t)buffer + word_len);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Program a page of the flash chip. Call ``spi_flash_ll_set_address`` before
|
|
* this to set the address to program.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param buffer Buffer holding the data to program
|
|
* @param length Length to program.
|
|
*/
|
|
static inline void spi_flash_ll_program_page(spi_dev_t *dev, const void *buffer, uint32_t length)
|
|
{
|
|
dev->user.usr_dummy = 0;
|
|
spi_flash_ll_set_buffer_data(dev, buffer, length);
|
|
dev->cmd.flash_pp = 1;
|
|
}
|
|
|
|
/**
|
|
* Trigger a user defined transaction. All phases, including command, address, dummy, and the data phases,
|
|
* should be configured before this is called.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
*/
|
|
static inline void spi_flash_ll_user_start(spi_dev_t *dev)
|
|
{
|
|
dev->cmd.usr = 1;
|
|
}
|
|
|
|
/**
|
|
* Check whether the host is idle to perform new commands.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
*
|
|
* @return true if the host is idle, otherwise false
|
|
*/
|
|
static inline bool spi_flash_ll_host_idle(const spi_dev_t *dev)
|
|
{
|
|
return dev->ext2.st != 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------------------
|
|
* Configs
|
|
*----------------------------------------------------------------------------*/
|
|
/**
|
|
* Select which pin to use for the flash
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param pin Pin ID to use, 0-2. Set to other values to disable all the CS pins.
|
|
*/
|
|
static inline void spi_flash_ll_set_cs_pin(spi_dev_t *dev, int pin)
|
|
{
|
|
dev->pin.cs0_dis = (pin == 0) ? 0 : 1;
|
|
dev->pin.cs1_dis = (pin == 1) ? 0 : 1;
|
|
dev->pin.cs2_dis = (pin == 2) ? 0 : 1;
|
|
}
|
|
|
|
/**
|
|
* Set the read io mode.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param read_mode I/O mode to use in the following transactions.
|
|
*/
|
|
static inline void spi_flash_ll_set_read_mode(spi_dev_t *dev, esp_flash_io_mode_t read_mode)
|
|
{
|
|
typeof (dev->ctrl) ctrl = dev->ctrl;
|
|
ctrl.val &= ~(SPI_FREAD_QIO_M | SPI_FREAD_QUAD_M | SPI_FREAD_DIO_M | SPI_FREAD_DUAL_M);
|
|
ctrl.val |= SPI_FASTRD_MODE_M;
|
|
switch (read_mode) {
|
|
case SPI_FLASH_FASTRD:
|
|
//the default option
|
|
break;
|
|
case SPI_FLASH_QIO:
|
|
ctrl.fread_qio = 1;
|
|
break;
|
|
case SPI_FLASH_QOUT:
|
|
ctrl.fread_quad = 1;
|
|
break;
|
|
case SPI_FLASH_DIO:
|
|
ctrl.fread_dio = 1;
|
|
break;
|
|
case SPI_FLASH_DOUT:
|
|
ctrl.fread_dual = 1;
|
|
break;
|
|
case SPI_FLASH_SLOWRD:
|
|
ctrl.fastrd_mode = 0;
|
|
break;
|
|
default:
|
|
abort();
|
|
}
|
|
dev->ctrl = ctrl;
|
|
}
|
|
|
|
/**
|
|
* Set clock frequency to work at.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param clock_val pointer to the clock value to set
|
|
*/
|
|
static inline void spi_flash_ll_set_clock(spi_dev_t *dev, spi_flash_ll_clock_reg_t *clock_val)
|
|
{
|
|
dev->clock = *clock_val;
|
|
}
|
|
|
|
/**
|
|
* Set the input length, in bits.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param bitlen Length of input, in bits.
|
|
*/
|
|
static inline void spi_flash_ll_set_miso_bitlen(spi_dev_t *dev, uint32_t bitlen)
|
|
{
|
|
dev->user.usr_miso = bitlen > 0;
|
|
dev->miso_dlen.usr_miso_dbitlen = bitlen ? (bitlen - 1) : 0;
|
|
}
|
|
|
|
/**
|
|
* Set the output length, in bits (not including command, address and dummy
|
|
* phases)
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param bitlen Length of output, in bits.
|
|
*/
|
|
static inline void spi_flash_ll_set_mosi_bitlen(spi_dev_t *dev, uint32_t bitlen)
|
|
{
|
|
dev->user.usr_mosi = bitlen > 0;
|
|
dev->mosi_dlen.usr_mosi_dbitlen = bitlen ? (bitlen - 1) : 0;
|
|
}
|
|
|
|
/**
|
|
* Set the command with fixed length (8 bits).
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param command Command to send
|
|
*/
|
|
static inline void spi_flash_ll_set_command8(spi_dev_t *dev, uint8_t command)
|
|
{
|
|
dev->user.usr_command = 1;
|
|
typeof(dev->user2) user2 = {
|
|
.usr_command_value = command,
|
|
.usr_command_bitlen = (8 - 1),
|
|
};
|
|
dev->user2 = user2;
|
|
}
|
|
|
|
/**
|
|
* Set the address length to send, in bits. Should be called before commands that requires the address e.g. erase sector, read, write...
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param bitlen Length of the address, in bits
|
|
*/
|
|
static inline void spi_flash_ll_set_addr_bitlen(spi_dev_t *dev, uint32_t bitlen)
|
|
{
|
|
dev->user1.usr_addr_bitlen = (bitlen - 1);
|
|
dev->user.usr_addr = bitlen ? 1 : 0;
|
|
}
|
|
|
|
/**
|
|
* Set the address to send. Should be called before commands that requires the address e.g. erase sector, read, write...
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param addr Address to send
|
|
*/
|
|
static inline void spi_flash_ll_set_address(spi_dev_t *dev, uint32_t addr)
|
|
{
|
|
dev->addr = addr;
|
|
}
|
|
|
|
/**
|
|
* Set the length of dummy cycles.
|
|
*
|
|
* @param dev Beginning address of the peripheral registers.
|
|
* @param dummy_n Cycles of dummy phases
|
|
*/
|
|
static inline void spi_flash_ll_set_dummy(spi_dev_t *dev, uint32_t dummy_n)
|
|
{
|
|
dev->user.usr_dummy = dummy_n ? 1 : 0;
|
|
dev->user1.usr_dummy_cyclelen = dummy_n - 1;
|
|
}
|