288 lines
8.8 KiB
C
288 lines
8.8 KiB
C
/* Console example — Ethernet commands
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/event_groups.h"
|
|
#include "tcpip_adapter.h"
|
|
#include "esp_log.h"
|
|
#include "esp_console.h"
|
|
#include "esp_event_loop.h"
|
|
#include "esp_eth.h"
|
|
#include "argtable3/argtable3.h"
|
|
#include "iperf.h"
|
|
#include "sdkconfig.h"
|
|
|
|
#if CONFIG_PHY_LAN8720
|
|
#include "eth_phy/phy_lan8720.h"
|
|
#define DEFAULT_ETHERNET_PHY_CONFIG phy_lan8720_default_ethernet_config
|
|
#elif CONFIG_PHY_TLK110
|
|
#include "eth_phy/phy_tlk110.h"
|
|
#define DEFAULT_ETHERNET_PHY_CONFIG phy_tlk110_default_ethernet_config
|
|
#elif CONFIG_PHY_IP101
|
|
#include "eth_phy/phy_ip101.h"
|
|
#define DEFAULT_ETHERNET_PHY_CONFIG phy_ip101_default_ethernet_config
|
|
#endif
|
|
|
|
static tcpip_adapter_ip_info_t ip;
|
|
static bool started = false;
|
|
static EventGroupHandle_t eth_event_group;
|
|
static const int GOTIP_BIT = BIT0;
|
|
|
|
#define PIN_PHY_POWER CONFIG_PHY_POWER_PIN
|
|
#define PIN_SMI_MDC CONFIG_PHY_SMI_MDC_PIN
|
|
#define PIN_SMI_MDIO CONFIG_PHY_SMI_MDIO_PIN
|
|
|
|
#ifdef CONFIG_PHY_USE_POWER_PIN
|
|
|
|
static void phy_device_power_enable_via_gpio(bool enable)
|
|
{
|
|
assert(DEFAULT_ETHERNET_PHY_CONFIG.phy_power_enable);
|
|
|
|
if (!enable) {
|
|
DEFAULT_ETHERNET_PHY_CONFIG.phy_power_enable(false);
|
|
}
|
|
|
|
gpio_pad_select_gpio(PIN_PHY_POWER);
|
|
gpio_set_direction(PIN_PHY_POWER, GPIO_MODE_OUTPUT);
|
|
if (enable == true) {
|
|
gpio_set_level(PIN_PHY_POWER, 1);
|
|
ESP_LOGI(__func__, "Power On Ethernet PHY");
|
|
} else {
|
|
gpio_set_level(PIN_PHY_POWER, 0);
|
|
ESP_LOGI(__func__, "Power Off Ethernet PHY");
|
|
}
|
|
|
|
vTaskDelay(1); // Allow the power up/down to take effect, min 300us
|
|
|
|
if (enable) {
|
|
/* call the default PHY-specific power on function */
|
|
DEFAULT_ETHERNET_PHY_CONFIG.phy_power_enable(true);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void eth_gpio_config_rmii(void)
|
|
{
|
|
phy_rmii_configure_data_interface_pins();
|
|
phy_rmii_smi_configure_pins(PIN_SMI_MDC, PIN_SMI_MDIO);
|
|
}
|
|
|
|
/* "ethernet" command */
|
|
|
|
static struct {
|
|
struct arg_str *control;
|
|
struct arg_end *end;
|
|
} eth_control_args;
|
|
|
|
static int eth_cmd_control(int argc, char **argv)
|
|
{
|
|
int nerrors = arg_parse(argc, argv, (void **)ð_control_args);
|
|
if (nerrors != 0) {
|
|
arg_print_errors(stderr, eth_control_args.end, argv[0]);
|
|
return 1;
|
|
}
|
|
|
|
if (!strncmp(eth_control_args.control->sval[0], "start", 5) && !started) {
|
|
ESP_ERROR_CHECK(esp_eth_enable());
|
|
started = true;
|
|
}
|
|
if (!strncmp(eth_control_args.control->sval[0], "stop", 4) && started) {
|
|
ESP_ERROR_CHECK(esp_eth_disable());
|
|
started = false;
|
|
}
|
|
if (!strncmp(eth_control_args.control->sval[0], "info", 4)) {
|
|
uint8_t mac_addr[6];
|
|
esp_eth_get_mac(mac_addr);
|
|
printf("HW ADDR: " MACSTR "\r\n", MAC2STR(mac_addr));
|
|
tcpip_adapter_get_ip_info(ESP_IF_ETH, &ip);
|
|
printf("ETHIP: " IPSTR "\r\n", IP2STR(&ip.ip));
|
|
printf("ETHMASK: " IPSTR "\r\n", IP2STR(&ip.netmask));
|
|
printf("ETHGW: " IPSTR "\r\n", IP2STR(&ip.gw));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* "iperf" command */
|
|
|
|
static struct {
|
|
struct arg_str *ip;
|
|
struct arg_lit *server;
|
|
struct arg_lit *udp;
|
|
struct arg_int *port;
|
|
struct arg_int *interval;
|
|
struct arg_int *time;
|
|
struct arg_lit *abort;
|
|
struct arg_end *end;
|
|
} iperf_args;
|
|
|
|
static int eth_cmd_iperf(int argc, char **argv)
|
|
{
|
|
int nerrors = arg_parse(argc, argv, (void **)&iperf_args);
|
|
iperf_cfg_t cfg;
|
|
|
|
if (nerrors != 0) {
|
|
arg_print_errors(stderr, iperf_args.end, argv[0]);
|
|
return 0;
|
|
}
|
|
|
|
memset(&cfg, 0, sizeof(cfg));
|
|
|
|
/* iperf -a */
|
|
if (iperf_args.abort->count != 0) {
|
|
iperf_stop();
|
|
return 0;
|
|
}
|
|
|
|
if (((iperf_args.ip->count == 0) && (iperf_args.server->count == 0)) ||
|
|
((iperf_args.ip->count != 0) && (iperf_args.server->count != 0))) {
|
|
ESP_LOGE(__func__, "Wrong mode! ESP32 should run in client or server mode");
|
|
return 0;
|
|
}
|
|
|
|
/* iperf -s */
|
|
if (iperf_args.ip->count == 0) {
|
|
cfg.flag |= IPERF_FLAG_SERVER;
|
|
}
|
|
/* iperf -c SERVER_ADDRESS */
|
|
else {
|
|
cfg.dip = ipaddr_addr(iperf_args.ip->sval[0]);
|
|
cfg.flag |= IPERF_FLAG_CLIENT;
|
|
}
|
|
|
|
/* acquiring for ip, could blocked here */
|
|
xEventGroupWaitBits(eth_event_group, GOTIP_BIT, pdFALSE, pdTRUE, portMAX_DELAY);
|
|
|
|
cfg.sip = ip.ip.addr;
|
|
if (cfg.sip == 0) {
|
|
return 0;
|
|
}
|
|
|
|
/* iperf -u */
|
|
if (iperf_args.udp->count == 0) {
|
|
cfg.flag |= IPERF_FLAG_TCP;
|
|
} else {
|
|
cfg.flag |= IPERF_FLAG_UDP;
|
|
}
|
|
|
|
/* iperf -p */
|
|
if (iperf_args.port->count == 0) {
|
|
cfg.sport = IPERF_DEFAULT_PORT;
|
|
cfg.dport = IPERF_DEFAULT_PORT;
|
|
} else {
|
|
if (cfg.flag & IPERF_FLAG_SERVER) {
|
|
cfg.sport = iperf_args.port->ival[0];
|
|
cfg.dport = IPERF_DEFAULT_PORT;
|
|
} else {
|
|
cfg.sport = IPERF_DEFAULT_PORT;
|
|
cfg.dport = iperf_args.port->ival[0];
|
|
}
|
|
}
|
|
|
|
/* iperf -i */
|
|
if (iperf_args.interval->count == 0) {
|
|
cfg.interval = IPERF_DEFAULT_INTERVAL;
|
|
} else {
|
|
cfg.interval = iperf_args.interval->ival[0];
|
|
if (cfg.interval <= 0) {
|
|
cfg.interval = IPERF_DEFAULT_INTERVAL;
|
|
}
|
|
}
|
|
|
|
/* iperf -t */
|
|
if (iperf_args.time->count == 0) {
|
|
cfg.time = IPERF_DEFAULT_TIME;
|
|
} else {
|
|
cfg.time = iperf_args.time->ival[0];
|
|
if (cfg.time <= cfg.interval) {
|
|
cfg.time = cfg.interval;
|
|
}
|
|
}
|
|
|
|
printf("mode=%s-%s sip=%d.%d.%d.%d:%d, dip=%d.%d.%d.%d:%d, interval=%d, time=%d\r\n",
|
|
cfg.flag & IPERF_FLAG_TCP ? "tcp" : "udp",
|
|
cfg.flag & IPERF_FLAG_SERVER ? "server" : "client",
|
|
cfg.sip & 0xFF, (cfg.sip >> 8) & 0xFF, (cfg.sip >> 16) & 0xFF, (cfg.sip >> 24) & 0xFF, cfg.sport,
|
|
cfg.dip & 0xFF, (cfg.dip >> 8) & 0xFF, (cfg.dip >> 16) & 0xFF, (cfg.dip >> 24) & 0xFF, cfg.dport,
|
|
cfg.interval, cfg.time);
|
|
|
|
iperf_start(&cfg);
|
|
return 0;
|
|
}
|
|
|
|
static esp_err_t eth_event_handler(void *ctx, system_event_t *event)
|
|
{
|
|
switch (event->event_id) {
|
|
case SYSTEM_EVENT_ETH_START:
|
|
started = true;
|
|
break;
|
|
case SYSTEM_EVENT_ETH_GOT_IP:
|
|
memset(&ip, 0, sizeof(tcpip_adapter_ip_info_t));
|
|
ESP_ERROR_CHECK(tcpip_adapter_get_ip_info(ESP_IF_ETH, &ip));
|
|
xEventGroupSetBits(eth_event_group, GOTIP_BIT);
|
|
break;
|
|
case SYSTEM_EVENT_ETH_STOP:
|
|
xEventGroupClearBits(eth_event_group, GOTIP_BIT);
|
|
started = false;
|
|
default:
|
|
break;
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
void register_ethernet()
|
|
{
|
|
eth_event_group = xEventGroupCreate();
|
|
tcpip_adapter_init();
|
|
ESP_ERROR_CHECK(esp_event_loop_init(eth_event_handler, NULL));
|
|
|
|
eth_config_t config = DEFAULT_ETHERNET_PHY_CONFIG;
|
|
config.phy_addr = CONFIG_PHY_ADDRESS;
|
|
config.gpio_config = eth_gpio_config_rmii;
|
|
config.tcpip_input = tcpip_adapter_eth_input;
|
|
config.clock_mode = CONFIG_PHY_CLOCK_MODE;
|
|
#ifdef CONFIG_PHY_USE_POWER_PIN
|
|
/* Replace the default 'power enable' function with an example-specific one
|
|
that toggles a power GPIO. */
|
|
config.phy_power_enable = phy_device_power_enable_via_gpio;
|
|
#endif
|
|
|
|
ESP_ERROR_CHECK(esp_eth_init(&config));
|
|
|
|
eth_control_args.control = arg_str1(NULL, NULL, "<start|stop|info>", "Start/Stop Ethernet or Get info of Ethernet");
|
|
eth_control_args.end = arg_end(1);
|
|
const esp_console_cmd_t cmd = {
|
|
.command = "ethernet",
|
|
.help = "Control Ethernet interface",
|
|
.hint = NULL,
|
|
.func = eth_cmd_control,
|
|
.argtable = ð_control_args
|
|
};
|
|
ESP_ERROR_CHECK(esp_console_cmd_register(&cmd));
|
|
|
|
iperf_args.ip = arg_str0("c", "client", "<ip>",
|
|
"run in client mode, connecting to <host>");
|
|
iperf_args.server = arg_lit0("s", "server", "run in server mode");
|
|
iperf_args.udp = arg_lit0("u", "udp", "use UDP rather than TCP");
|
|
iperf_args.port = arg_int0("p", "port", "<port>",
|
|
"server port to listen on/connect to");
|
|
iperf_args.interval = arg_int0("i", "interval", "<interval>",
|
|
"seconds between periodic bandwidth reports");
|
|
iperf_args.time = arg_int0("t", "time", "<time>", "time in seconds to transmit for (default 10 secs)");
|
|
iperf_args.abort = arg_lit0("a", "abort", "abort running iperf");
|
|
iperf_args.end = arg_end(1);
|
|
const esp_console_cmd_t iperf_cmd = {
|
|
.command = "iperf",
|
|
.help = "iperf command",
|
|
.hint = NULL,
|
|
.func = ð_cmd_iperf,
|
|
.argtable = &iperf_args
|
|
};
|
|
ESP_ERROR_CHECK(esp_console_cmd_register(&iperf_cmd));
|
|
}
|