Cycle_sel field was never used in binutils and was always set to zero. This change removes it from documentation and examples. Needs ULP binutils with this change: https://github.com/espressif/binutils-esp32ulp/commit/af79434
115 lines
3 KiB
ArmAsm
115 lines
3 KiB
ArmAsm
/* ULP Example: using ADC in deep sleep
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
This file contains assembly code which runs on the ULP.
|
|
|
|
ULP wakes up to run this code at a certain period, determined by the values
|
|
in SENS_ULP_CP_SLEEP_CYCx_REG registers. On each wake up, the program
|
|
measures input voltage on the given ADC channel 'adc_oversampling_factor'
|
|
times. Measurements are accumulated and average value is calculated.
|
|
Average value is compared to the two thresholds: 'low_thr' and 'high_thr'.
|
|
If the value is less than 'low_thr' or more than 'high_thr', ULP wakes up
|
|
the chip from deep sleep.
|
|
*/
|
|
|
|
/* ULP assembly files are passed through C preprocessor first, so include directives
|
|
and C macros may be used in these files
|
|
*/
|
|
#include "soc/rtc_cntl_reg.h"
|
|
#include "soc/soc_ulp.h"
|
|
|
|
/* ADC1 channel 6, GPIO34 */
|
|
.set adc_channel, 6
|
|
|
|
/* Configure the number of ADC samples to average on each measurement.
|
|
For convenience, make it a power of 2. */
|
|
.set adc_oversampling_factor_log, 2
|
|
.set adc_oversampling_factor, (1 << adc_oversampling_factor_log)
|
|
|
|
/* Define variables, which go into .bss section (zero-initialized data) */
|
|
.bss
|
|
|
|
/* Low threshold of ADC reading.
|
|
Set by the main program. */
|
|
.global low_thr
|
|
low_thr:
|
|
.long 0
|
|
|
|
/* High threshold of ADC reading.
|
|
Set by the main program. */
|
|
.global high_thr
|
|
high_thr:
|
|
.long 0
|
|
|
|
/* Counter of measurements done */
|
|
.global sample_counter
|
|
sample_counter:
|
|
.long 0
|
|
|
|
.global last_result
|
|
last_result:
|
|
.long 0
|
|
|
|
/* Code goes into .text section */
|
|
.text
|
|
.global entry
|
|
entry:
|
|
/* increment sample counter */
|
|
move r3, sample_counter
|
|
ld r2, r3, 0
|
|
add r2, r2, 1
|
|
st r2, r3, 0
|
|
|
|
/* do measurements using ADC */
|
|
/* r0 will be used as accumulator */
|
|
move r0, 0
|
|
/* initialize the loop counter */
|
|
stage_rst
|
|
measure:
|
|
/* measure and add value to accumulator */
|
|
adc r1, 0, adc_channel + 1
|
|
add r0, r0, r1
|
|
/* increment loop counter and check exit condition */
|
|
stage_inc 1
|
|
jumps measure, adc_oversampling_factor, lt
|
|
|
|
/* divide accumulator by adc_oversampling_factor.
|
|
Since it is chosen as a power of two, use right shift */
|
|
rsh r0, r0, adc_oversampling_factor_log
|
|
/* averaged value is now in r0; store it into last_result */
|
|
move r3, last_result
|
|
st r0, r3, 0
|
|
|
|
/* compare with low_thr; wake up if value < low_thr */
|
|
move r3, low_thr
|
|
ld r3, r3, 0
|
|
sub r3, r0, r3
|
|
jump wake_up, ov
|
|
|
|
/* compare with high_thr; wake up if value > high_thr */
|
|
move r3, high_thr
|
|
ld r3, r3, 0
|
|
sub r3, r3, r0
|
|
jump wake_up, ov
|
|
|
|
/* value within range, end the program */
|
|
.global exit
|
|
exit:
|
|
halt
|
|
|
|
.global wake_up
|
|
wake_up:
|
|
/* Check if the system can be woken up */
|
|
READ_RTC_REG(RTC_CNTL_DIAG0_REG, 19, 1)
|
|
and r0, r0, 1
|
|
jump exit, eq
|
|
|
|
/* Wake up the SoC, end program */
|
|
wake
|
|
WRITE_RTC_FIELD(RTC_CNTL_STATE0_REG, RTC_CNTL_ULP_CP_SLP_TIMER_EN, 0)
|
|
halt
|