OVMS3-idf/components/esp32/include/soc/pid.h
2016-08-17 23:08:22 +08:00

66 lines
2.7 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_PID_H_
#define _SOC_PID_H_
#define PROPID_GEN_BASE 0x3FF1F000
//Bits 1..7: 1 if interrupt will be triggering PID change
#define PROPID_CONFIG_INTERRUPT_ENABLE ((PROPID_GEN_BASE)+0x000)
//Vectors for the various interrupt handlers
#define PROPID_CONFIG_INTERRUPT_ADDR_1 ((PROPID_GEN_BASE)+0x004)
#define PROPID_CONFIG_INTERRUPT_ADDR_2 ((PROPID_GEN_BASE)+0x008)
#define PROPID_CONFIG_INTERRUPT_ADDR_3 ((PROPID_GEN_BASE)+0x00C)
#define PROPID_CONFIG_INTERRUPT_ADDR_4 ((PROPID_GEN_BASE)+0x010)
#define PROPID_CONFIG_INTERRUPT_ADDR_5 ((PROPID_GEN_BASE)+0x014)
#define PROPID_CONFIG_INTERRUPT_ADDR_6 ((PROPID_GEN_BASE)+0x018)
#define PROPID_CONFIG_INTERRUPT_ADDR_7 ((PROPID_GEN_BASE)+0x01C)
//Delay, in CPU cycles, before switching to new PID
#define PROPID_CONFIG_PID_DELAY ((PROPID_GEN_BASE)+0x020)
#define PROPID_CONFIG_NMI_DELAY ((PROPID_GEN_BASE)+0x024)
//Last detected interrupt. Set by hw on int.
#define PROPID_TABLE_LEVEL ((PROPID_GEN_BASE)+0x028)
//PID/prev int data for each int
#define PROPID_FROM_1 ((PROPID_GEN_BASE)+0x02C)
#define PROPID_FROM_2 ((PROPID_GEN_BASE)+0x030)
#define PROPID_FROM_3 ((PROPID_GEN_BASE)+0x034)
#define PROPID_FROM_4 ((PROPID_GEN_BASE)+0x038)
#define PROPID_FROM_5 ((PROPID_GEN_BASE)+0x03C)
#define PROPID_FROM_6 ((PROPID_GEN_BASE)+0x040)
#define PROPID_FROM_7 ((PROPID_GEN_BASE)+0x044)
#define PROPID_FROM_PID_MASK 0x7
#define PROPID_FROM_PID_S 0
#define PROPID_FROM_INT_MASK 0xF
#define PROPID_FROM_INT_S 3
//PID to be set after confirm routine
#define PROPID_PID_NEW ((PROPID_GEN_BASE)+0x048)
//Write to kick off PID change
#define PROPID_PID_CONFIRM ((PROPID_GEN_BASE)+0x04c)
//current PID?
#define PROPID_PID_REG ((PROPID_GEN_BASE)+0x050)
//Write to mask NMI
#define PROPID_PID_NMI_MASK_HW_ENABLE ((PROPID_GEN_BASE)+0x054)
//Write to unmask NMI
#define PROPID_PID_NMI_MASK_HW_DISABLE ((PROPID_GEN_BASE)+0x058)
#define PROPID_PID_NMI_MASK_HW_REG ((PROPID_GEN_BASE)+0x05c)
//Debug regs
#define PROPID_PID ((PROPID_GEN_BASE)+0x060)
#define PROPID_NMI_MASK_HW ((PROPID_GEN_BASE)+0x064)
#endif /* _SOC_PID_H_ */