161 lines
5.6 KiB
C
161 lines
5.6 KiB
C
/* LEDC (LED Controller) fade example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "driver/ledc.h"
|
|
#include "esp_err.h"
|
|
|
|
/*
|
|
* About this example
|
|
*
|
|
* 1. Start with initializing LEDC module:
|
|
* a. Set the timer of LEDC first, this determines the frequency
|
|
* and resolution of PWM.
|
|
* b. Then set the LEDC channel you want to use,
|
|
* and bind with one of the timers.
|
|
*
|
|
* 2. You need first to install a default fade function,
|
|
* then you can use fade APIs.
|
|
*
|
|
* 3. You can also set a target duty directly without fading.
|
|
*
|
|
* 4. This example uses GPIO18/19/4/5 as LEDC output,
|
|
* and it will change the duty repeatedly.
|
|
*
|
|
* 5. GPIO18/19 are from high speed channel group.
|
|
* GPIO4/5 are from low speed channel group.
|
|
*
|
|
*/
|
|
#define LEDC_HS_TIMER LEDC_TIMER_0
|
|
#define LEDC_HS_MODE LEDC_HIGH_SPEED_MODE
|
|
#define LEDC_HS_CH0_GPIO (18)
|
|
#define LEDC_HS_CH0_CHANNEL LEDC_CHANNEL_0
|
|
#define LEDC_HS_CH1_GPIO (19)
|
|
#define LEDC_HS_CH1_CHANNEL LEDC_CHANNEL_1
|
|
|
|
#define LEDC_LS_TIMER LEDC_TIMER_1
|
|
#define LEDC_LS_MODE LEDC_LOW_SPEED_MODE
|
|
#define LEDC_LS_CH2_GPIO (4)
|
|
#define LEDC_LS_CH2_CHANNEL LEDC_CHANNEL_2
|
|
#define LEDC_LS_CH3_GPIO (5)
|
|
#define LEDC_LS_CH3_CHANNEL LEDC_CHANNEL_3
|
|
|
|
#define LEDC_TEST_CH_NUM (4)
|
|
#define LEDC_TEST_DUTY (4000)
|
|
#define LEDC_TEST_FADE_TIME (3000)
|
|
|
|
void app_main()
|
|
{
|
|
int ch;
|
|
|
|
/*
|
|
* Prepare and set configuration of timers
|
|
* that will be used by LED Controller
|
|
*/
|
|
ledc_timer_config_t ledc_timer = {
|
|
.duty_resolution = LEDC_TIMER_13_BIT, // resolution of PWM duty
|
|
.freq_hz = 5000, // frequency of PWM signal
|
|
.speed_mode = LEDC_HS_MODE, // timer mode
|
|
.timer_num = LEDC_HS_TIMER // timer index
|
|
};
|
|
// Set configuration of timer0 for high speed channels
|
|
ledc_timer_config(&ledc_timer);
|
|
|
|
// Prepare and set configuration of timer1 for low speed channels
|
|
ledc_timer.speed_mode = LEDC_LS_MODE;
|
|
ledc_timer.timer_num = LEDC_LS_TIMER;
|
|
ledc_timer_config(&ledc_timer);
|
|
|
|
/*
|
|
* Prepare individual configuration
|
|
* for each channel of LED Controller
|
|
* by selecting:
|
|
* - controller's channel number
|
|
* - output duty cycle, set initially to 0
|
|
* - GPIO number where LED is connected to
|
|
* - speed mode, either high or low
|
|
* - timer servicing selected channel
|
|
* Note: if different channels use one timer,
|
|
* then frequency and bit_num of these channels
|
|
* will be the same
|
|
*/
|
|
ledc_channel_config_t ledc_channel[LEDC_TEST_CH_NUM] = {
|
|
{
|
|
.channel = LEDC_HS_CH0_CHANNEL,
|
|
.duty = 0,
|
|
.gpio_num = LEDC_HS_CH0_GPIO,
|
|
.speed_mode = LEDC_HS_MODE,
|
|
.timer_sel = LEDC_HS_TIMER
|
|
},
|
|
{
|
|
.channel = LEDC_HS_CH1_CHANNEL,
|
|
.duty = 0,
|
|
.gpio_num = LEDC_HS_CH1_GPIO,
|
|
.speed_mode = LEDC_HS_MODE,
|
|
.timer_sel = LEDC_HS_TIMER
|
|
},
|
|
{
|
|
.channel = LEDC_LS_CH2_CHANNEL,
|
|
.duty = 0,
|
|
.gpio_num = LEDC_LS_CH2_GPIO,
|
|
.speed_mode = LEDC_LS_MODE,
|
|
.timer_sel = LEDC_LS_TIMER
|
|
},
|
|
{
|
|
.channel = LEDC_LS_CH3_CHANNEL,
|
|
.duty = 0,
|
|
.gpio_num = LEDC_LS_CH3_GPIO,
|
|
.speed_mode = LEDC_LS_MODE,
|
|
.timer_sel = LEDC_LS_TIMER
|
|
},
|
|
};
|
|
|
|
// Set LED Controller with previously prepared configuration
|
|
for (ch = 0; ch < LEDC_TEST_CH_NUM; ch++) {
|
|
ledc_channel_config(&ledc_channel[ch]);
|
|
}
|
|
|
|
// Initialize fade service.
|
|
ledc_fade_func_install(0);
|
|
|
|
while (1) {
|
|
printf("1. LEDC fade up to duty = %d\n", LEDC_TEST_DUTY);
|
|
for (ch = 0; ch < LEDC_TEST_CH_NUM; ch++) {
|
|
ledc_set_fade_with_time(ledc_channel[ch].speed_mode,
|
|
ledc_channel[ch].channel, LEDC_TEST_DUTY, LEDC_TEST_FADE_TIME);
|
|
ledc_fade_start(ledc_channel[ch].speed_mode,
|
|
ledc_channel[ch].channel, LEDC_FADE_NO_WAIT);
|
|
}
|
|
vTaskDelay(LEDC_TEST_FADE_TIME / portTICK_PERIOD_MS);
|
|
|
|
printf("2. LEDC fade down to duty = 0\n");
|
|
for (ch = 0; ch < LEDC_TEST_CH_NUM; ch++) {
|
|
ledc_set_fade_with_time(ledc_channel[ch].speed_mode,
|
|
ledc_channel[ch].channel, 0, LEDC_TEST_FADE_TIME);
|
|
ledc_fade_start(ledc_channel[ch].speed_mode,
|
|
ledc_channel[ch].channel, LEDC_FADE_NO_WAIT);
|
|
}
|
|
vTaskDelay(LEDC_TEST_FADE_TIME / portTICK_PERIOD_MS);
|
|
|
|
printf("3. LEDC set duty = %d without fade\n", LEDC_TEST_DUTY);
|
|
for (ch = 0; ch < LEDC_TEST_CH_NUM; ch++) {
|
|
ledc_set_duty(ledc_channel[ch].speed_mode, ledc_channel[ch].channel, LEDC_TEST_DUTY);
|
|
ledc_update_duty(ledc_channel[ch].speed_mode, ledc_channel[ch].channel);
|
|
}
|
|
vTaskDelay(1000 / portTICK_PERIOD_MS);
|
|
|
|
printf("4. LEDC set duty = 0 without fade\n");
|
|
for (ch = 0; ch < LEDC_TEST_CH_NUM; ch++) {
|
|
ledc_set_duty(ledc_channel[ch].speed_mode, ledc_channel[ch].channel, 0);
|
|
ledc_update_duty(ledc_channel[ch].speed_mode, ledc_channel[ch].channel);
|
|
}
|
|
vTaskDelay(1000 / portTICK_PERIOD_MS);
|
|
}
|
|
}
|