OVMS3-idf/components/esp_rom/include/esp32s2/rom/opi_flash.h
2020-01-22 12:14:38 +08:00

299 lines
11 KiB
C

/*
* copyright (c) Espressif System 2019
*
*/
#ifndef _ROM_OPI_FLASH_H_
#define _ROM_OPI_FLASH_H_
#include <stdio.h>
#include <string.h>
#include <stdint.h>
#include "spi_flash.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef struct {
uint16_t cmd; /*!< Command value */
uint16_t cmdBitLen; /*!< Command byte length*/
uint32_t *addr; /*!< Point to address value*/
uint32_t addrBitLen; /*!< Address byte length*/
uint32_t *txData; /*!< Point to send data buffer*/
uint32_t txDataBitLen; /*!< Send data byte length.*/
uint32_t *rxData; /*!< Point to recevie data buffer*/
uint32_t rxDataBitLen; /*!< Recevie Data byte length.*/
uint32_t dummyBitLen;
} esp_rom_spi_cmd_t;
#define ESP_ROM_OPIFLASH_MUX_TAKE()
#define ESP_ROM_OPIFLASH_MUX_GIVE()
#define ESP_ROM_OPIFLASH_SEL_CS0 (BIT(0))
#define ESP_ROM_OPIFLASH_SEL_CS1 (BIT(1))
// Definition of MX25UM25645G Octa Flash
// SPI status register
#define ESP_ROM_SPIFLASH_BUSY_FLAG BIT0
#define ESP_ROM_SPIFLASH_WRENABLE_FLAG BIT1
#define ESP_ROM_SPIFLASH_BP0 BIT2
#define ESP_ROM_SPIFLASH_BP1 BIT3
#define ESP_ROM_SPIFLASH_BP2 BIT4
#define ESP_ROM_SPIFLASH_WR_PROTECT (ESP_ROM_SPIFLASH_BP0|ESP_ROM_SPIFLASH_BP1|ESP_ROM_SPIFLASH_BP2)
#define ESP_ROM_SPIFLASH_QE BIT9
#define FLASH_OP_MODE_RDCMD_DOUT 0x3B
#define ESP_ROM_FLASH_SECTOR_SIZE 0x1000
#define ESP_ROM_FLASH_BLOCK_SIZE_64K 0x10000
#define ESP_ROM_FLASH_PAGE_SIZE 256
// FLASH commands
#define ROM_FLASH_CMD_RDID 0x9F
#define ROM_FLASH_CMD_WRSR 0x01
#define ROM_FLASH_CMD_WRSR2 0x31 /* Not all SPI flash uses this command */
#define ROM_FLASH_CMD_WREN 0x06
#define ROM_FLASH_CMD_WRDI 0x04
#define ROM_FLASH_CMD_RDSR 0x05
#define ROM_FLASH_CMD_RDSR2 0x35 /* Not all SPI flash uses this command */
#define ROM_FLASH_CMD_ERASE_SEC 0x20
#define ROM_FLASH_CMD_ERASE_BLK_32K 0x52
#define ROM_FLASH_CMD_ERASE_BLK_64K 0xD8
#define ROM_FLASH_CMD_OTPEN 0x3A /* Enable OTP mode, not all SPI flash uses this command */
#define ROM_FLASH_CMD_RSTEN 0x66
#define ROM_FLASH_CMD_RST 0x99
#define ROM_FLASH_CMD_SE4B 0x21
#define ROM_FLASH_CMD_SE4B_OCT 0xDE21
#define ROM_FLASH_CMD_BE4B 0xDC
#define ROM_FLASH_CMD_BE4B_OCT 0x23DC
#define ROM_FLASH_CMD_RSTEN_OCT 0x9966
#define ROM_FLASH_CMD_RST_OCT 0x6699
#define ROM_FLASH_CMD_FSTRD4B_STR 0x13EC
#define ROM_FLASH_CMD_FSTRD4B_DTR 0x11EE
#define ROM_FLASH_CMD_FSTRD4B 0x0C
#define ROM_FLASH_CMD_PP4B 0x12
#define ROM_FLASH_CMD_PP4B_OCT 0xED12
#define ROM_FLASH_CMD_RDID_OCT 0x609F
#define ROM_FLASH_CMD_WREN_OCT 0xF906
#define ROM_FLASH_CMD_RDSR_OCT 0xFA05
#define ROM_FLASH_CMD_RDCR2 0x71
#define ROM_FLASH_CMD_RDCR2_OCT 0x8E71
#define ROM_FLASH_CMD_WRCR2 0x72
#define ROM_FLASH_CMD_WRCR2_OCT 0x8D72
// Definitions for GigaDevice GD25LX256E Flash
#define ROM_FLASH_CMD_RDFSR_GD 0x70
#define ROM_FLASH_CMD_RD_GD 0x03
#define ROM_FLASH_CMD_RD4B_GD 0x13
#define ROM_FLASH_CMD_FSTRD_GD 0x0B
#define ROM_FLASH_CMD_FSTRD4B_GD 0x0C
#define ROM_FLASH_CMD_FSTRD_OOUT_GD 0x8B
#define ROM_FLASH_CMD_FSTRD4B_OOUT_GD 0x7C
#define ROM_FLASH_CMD_FSTRD_OIOSTR_GD 0xCB
#define ROM_FLASH_CMD_FSTRD4B_OIOSTR_GD 0xCC
#define ROM_FLASH_CMD_FSTRD4B_OIODTR_GD 0xFD
#define ROM_FLASH_CMD_PP_GD 0x02
#define ROM_FLASH_CMD_PP4B_GD 0x12
#define ROM_FLASH_CMD_PP_OOUT_GD 0x82
#define ROM_FLASH_CMD_PP4B_OOUT_GD 0x84
#define ROM_FLASH_CMD_PP_OIO_GD 0xC2
#define ROM_FLASH_CMD_PP4B_OIOSTR_GD 0x8E
#define ROM_FLASH_CMD_SE_GD 0x20
#define ROM_FLASH_CMD_SE4B_GD 0x21
#define ROM_FLASH_CMD_BE32K_GD 0x52
#define ROM_FLASH_CMD_BE32K4B_GD 0x5C
#define ROM_FLASH_CMD_BE64K_GD 0xD8
#define ROM_FLASH_CMD_BE64K4B_GD 0xDC
#define ROM_FLASH_CMD_EN4B_GD 0xB7
#define ROM_FLASH_CMD_DIS4B_GD 0xE9
// spi user mode command config
/**
* @brief Config the spi user command
* @param spi_num spi port
* @param pcmd pointer to accept the spi command struct
*/
void esp_rom_spi_cmd_config(int spi_num, esp_rom_spi_cmd_t* pcmd);
/**
* @brief Start a spi user command sequence
* @param spi_num spi port
* @param rx_buf buffer pointer to receive data
* @param rx_len receive data length in byte
* @param cs_en_mask decide which cs to use, 0 for cs0, 1 for cs1
* @param is_write_erase to indicate whether this is a write or erase operation, since the CPU would check permission
*/
void esp_rom_spi_cmd_start(int spi_num, uint8_t* rx_buf, uint16_t rx_len, uint8_t cs_en_mask, bool is_write_erase);
/**
* @brief Config opi flash pads according to efuse settings.
*/
void esp_rom_opiflash_pin_config(void);
// set SPI read/write mode
/**
* @brief Set SPI operation mode
* @param spi_num spi port
* @param mode Flash Read Mode
*/
void esp_rom_spi_set_op_mode(int spi_num, esp_rom_spiflash_read_mode_t mode);
/**
* @brief Set data swap mode in DTR(DDR) mode
* @param spi_num spi port
* @param wr_swap to decide whether to swap fifo data in dtr write operation
* @param rd_swap to decide whether to swap fifo data in dtr read operation
*/
void esp_rom_spi_set_dtr_swap_mode(int spi, bool wr_swap, bool rd_swap);
/**
* @brief to send reset command in spi/opi-str/opi-dtr mode(for MX25UM25645G)
* @param spi_num spi port
*/
void esp_rom_opiflash_mode_reset(int spi_num);
#if 0
// MX25UM25645G opi flash interface
/**
* @brief To execute a flash operation command
* @param spi_num spi port
* @param mode Flash Read Mode
* @param cmd data to send in command field
* @param cmd_bit_len bit length of command field
* @param addr data to send in address field
* @param addr_bit_len bit length of address field
* @param dummy_bits bit length of dummy field
* @param mosi_data data buffer to be sent in mosi field
* @param mosi_bit_len bit length of data buffer to be sent in mosi field
* @param miso_data data buffer to accept data in miso field
* @param miso_bit_len bit length of data buffer to accept data in miso field
* @param cs_mark decide which cs pin to use. 0: cs0, 1: cs1
* @param is_write_erase_operation to indicate whether this a write or erase flash operation
*/
void esp_rom_opiflash_exec_cmd(int spi_num, esp_rom_spiflash_read_mode_t mode,
uint32_t cmd, int cmd_bit_len,
uint32_t addr, int addr_bit_len,
int dummy_bits,
uint8_t* mosi_data, int mosi_bit_len,
uint8_t* miso_data, int miso_bit_len,
uint32_t cs_mask,
bool is_write_erase_operation);
/**
* @brief send reset command to opi flash
* @param spi_num spi port
* @param mode Flash Operation Mode
*/
void esp_rom_opiflash_soft_reset(int spi_num, esp_rom_spiflash_read_mode_t mode);
/**
* @brief to read opi flash ID(for MX25UM25645G)
* @param spi_num spi port
* @param mode Flash Operation Mode
* @return opi flash id
*/
uint32_t esp_rom_opiflash_read_id(int spi_num, esp_rom_spiflash_read_mode_t mode);
/**
* @brief to read opi flash status register(for MX25UM25645G)
* @param spi_num spi port
* @param mode Flash Operation Mode
* @return opi flash status value
*/
uint8_t esp_rom_opiflash_rdsr(int spi_num, esp_rom_spiflash_read_mode_t mode);
/**
* @brief wait opi flash status register to be idle
* @param spi_num spi port
* @param mode Flash Operation Mode
*/
void esp_rom_opiflash_wait_idle(int spi_num, esp_rom_spiflash_read_mode_t mode);
/**
* @brief to read the config register2(for MX25UM25645G)
* @param spi_num spi port
* @param mode Flash Operation Mode
* @param addr the address of configure register
* @return value of config register2
*/
uint8_t esp_rom_opiflash_rdcr2(int spi_num, esp_rom_spiflash_read_mode_t mode, uint32_t addr);
/**
* @brief to write the config register2(for MX25UM25645G)
* @param spi_num spi port
* @param mode Flash Operation Mode
* @param addr the address of config register
* @param val the value to write
*/
void esp_rom_opiflash_wrcr2(int spi_num, esp_rom_spiflash_read_mode_t mode, uint32_t addr, uint8_t val);
/**
* @brief to erase flash sector(for MX25UM25645G)
* @param spi_num spi port
* @param address the sector address to be erased
* @param mode Flash operation mode
* @return flash operation result
*/
esp_rom_spiflash_result_t esp_rom_opiflash_erase_sector(int spi_num, uint32_t address, esp_rom_spiflash_read_mode_t mode);
/**
* @brief to erase flash block(for MX25UM25645G)
* @param spi_num spi port
* @param address the block address to be erased
* @param mode Flash operation mode
* @return flash operation result
*/
esp_rom_spiflash_result_t esp_rom_opiflash_erase_block_64k(int spi_num, uint32_t address, esp_rom_spiflash_read_mode_t mode);
/**
* @brief to erase a flash area define by start address and length(for MX25UM25645G)
* @param spi_num spi port
* @param start_addr the start address to be erased
* @param area_len the erea length to be erased
* @param mode flash operation mode
* @return flash operation result
*/
esp_rom_spiflash_result_t esp_rom_opiflash_erase_area(int spi_num, uint32_t start_addr, uint32_t area_len, esp_rom_spiflash_read_mode_t mode);
/**
* @brief to read data from opi flash(for MX25UM25645G)
* @param spi_num spi port
* @param mode flash operation mode
* @param flash_addr flash address to read data from
* @param data_addr data buffer to accept the data
* @param len data length to be read
* @return flash operation result
*/
esp_rom_spiflash_result_t esp_rom_opiflash_read(int spi_num, esp_rom_spiflash_read_mode_t mode, uint32_t flash_addr, uint8_t *data_addr, int len);
/**
* @brief to write data to opi flash(for MX25UM25645G)
* @param spi_num spi port
* @param mode flash operation mode
* @param flash_addr flash address to write data to
* @param data_addr data buffer to write to flash
* @param len data length to write
* @return flash operation result
*/
esp_rom_spiflash_result_t esp_rom_opiflash_write(int spi_num, esp_rom_spiflash_read_mode_t mode, uint32_t flash_addr, uint8_t *data_addr, uint32_t len);
/**
* @brief to set opi flash operation mode(for MX25UM25645G)
* @param spi_num spi port
* @param cur_mode current operation mode
* @param target the target operation mode to be set
*/
void esp_rom_opiflash_set_mode(int spi_num, esp_rom_spiflash_read_mode_t cur_mode, esp_rom_spiflash_read_mode_t target_mode);
#endif
#ifdef __cplusplus
}
#endif
#endif