OVMS3-idf/components/esp_rom/include/esp32s2beta/rom/cache.h
2019-06-11 13:07:02 +08:00

931 lines
29 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _ROM_CACHE_H_
#define _ROM_CACHE_H_
#include "esp_bit_defs.h"
#ifdef __cplusplus
extern "C" {
#endif
/** \defgroup cache_apis, cache operation related apis
* @brief cache apis
*/
/** @addtogroup cache_apis
* @{
*/
#define MIN_CACHE_SIZE 8192
#define MAX_CACHE_SIZE 16384
#define MIN_CACHE_WAYS 4
#define MAX_CACHE_WAYS 8
#define MIN_CACHE_LINE_SIZE 16
#define MAX_CACHE_LINE_SIZE 64
//normally should be (MAX_CACHE_SIZE / MIN_CACHE_WAYS / MIN_CACHE_LINE_SIZE), however, the items not all in one tag memory block.
#define MAX_TAG_BLOCK_ITEMS (MAX_CACHE_SIZE / MAX_CACHE_WAYS / MIN_CACHE_LINE_SIZE)
#define TAG_SIZE 4
#define MAX_TAG_BLOCK_SIZE (MAX_TAG_BLOCK_ITEMS * TAG_SIZE)
#define ESP_CACHE_TEMP_ADDR DROM0_ADDRESS_LOW
#define CACHE_MAX_OPERATION_SIZE BUS_ADDR_SIZE
typedef enum {
CACHE_MEMORY_INVALID = 0,
CACHE_MEMORY_ICACHE_LOW = BIT(0),
CACHE_MEMORY_ICACHE_HIGH = BIT(1),
CACHE_MEMORY_DCACHE_LOW = BIT(2),
CACHE_MEMORY_DCACHE_HIGH = BIT(3),
} cache_layout_t;
typedef enum {
CACHE_SIZE_8KB = 0,
CACHE_SIZE_16KB = 1,
} cache_size_t;
typedef enum {
CACHE_4WAYS_ASSOC = 0,
CACHE_8WAYS_ASSOC = 1,
} cache_ways_t;
typedef enum {
CACHE_LINE_SIZE_16B = 0,
CACHE_LINE_SIZE_32B = 1,
CACHE_LINE_SIZE_64B = 2,
} cache_line_size_t;
typedef enum {
CACHE_AUTOLOAD_NORMAL_MODE = 0, /*!< normal mode will autoload anytime if enabled */
CACHE_AUTOLOAD_REGION_MODE = 1, /*!< region mode only autoload if access the memory in regions */
} cache_autoload_mode_t;
typedef enum {
CACHE_AUTOLOAD_POSITIVE = 0, /*!< cache autoload step is positive */
CACHE_AUTOLOAD_NEGATIVE = 1, /*!< cache autoload step is negative */
} cache_autoload_order_t;
#define CACHE_AUTOLOAD_STEP(i) ((i) - 1)
typedef enum {
CACHE_AUTOLOAD_MISS_TRIGGER = 0, /*!< autoload only triggered by cache miss */
CACHE_AUTOLOAD_HIT_TRIGGER = 1, /*!< autoload only triggered by cache hit */
CACHE_AUTOLOAD_BOTH_TRIGGER = 2, /*!< autoload triggered both by cache miss and hit */
} cache_autoload_trigger_t;
struct cache_mode {
uint32_t cache_size;
uint16_t cache_line_size;
uint8_t cache_ways;
uint8_t icache;
};
struct tag_item {
uint32_t dirty:1; /*!< the cache line value is dirty or not */
uint32_t tag:14; /*!< the tag is the high part of the cache address, however is only 16MB range, and with out low part */
uint32_t valid:1; /*!< the tag item is valid or not */
uint32_t fifo_cnt:3; /*!< fifo cnt, 0 ~ 3 for 4 ways cache, 0 ~ 7 for 8 ways cache */
uint32_t lock:1; /*!< the cache line is locked or not */
uint32_t attr:3; /*!< the attribute of the external memory physical address */
uint32_t access:1; /*!< software accessable, used by hardware */
uint32_t reserved:8;
};
struct autoload_config {
uint8_t mode; /*!< autoload mode */
uint8_t order; /*!< autoload step is positive or negative */
uint8_t step; /*!< autoload step */
uint8_t trigger; /*!< autoload trigger */
uint32_t autoload_size; /*!< autoload size */
uint32_t addr0; /*!< autoload region0 start address */
uint32_t size0; /*!< autoload region0 size */
uint32_t addr1; /*!< autoload region1 start address */
uint32_t size1; /*!< autoload region1 size */
};
struct tag_group_info {
struct cache_mode mode; /*!< cache and cache mode */
uint32_t vaddr_offset; /*!< virtual address offset of the cache ways */
uint32_t tag_addr[MAX_CACHE_WAYS]; /*!< tag memory address, only [0~mode.ways-1] is valid to use */
uint32_t cache_memory_offset[MAX_CACHE_WAYS]; /*!< cache memory address, only [0~mode.ways-1] is valid to use */
};
struct lock_config {
uint32_t addr; /*!< manual lock address*/
uint16_t size; /*!< manual lock size*/
uint16_t group; /*!< manual lock group, 0 or 1*/
};
#define MMU_SET_ADDR_ALIGNED_ERROR 1
#define MMU_SET_PASE_SIZE_ERROR 3
#define MMU_SET_VADDR_OUT_RANGE 5
/**
* @brief Initialise cache mmu, mark all entries as invalid.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void Cache_MMU_Init(void);
/**
* @brief Set ICache mmu mapping.
* Please do not call this function in your SDK application.
*
* @param uint32_t ext_ram : DPORT_MMU_ACCESS_FLASH for flash, DPORT_MMU_ACCESS_SPIRAM for spiram, DPORT_MMU_INVALID for invalid.
*
* @param uint32_t vaddr : virtual address in CPU address space.
* Can be Iram0,Iram1,Irom0,Drom0 and AHB buses address.
* Should be aligned by psize.
*
* @param uint32_t paddr : physical address in external memory.
* Should be aligned by psize.
*
* @param uint32_t psize : page size of ICache, in kilobytes. Should be 64 here.
*
* @param uint32_t num : pages to be set.
*
* @param uint32_t fixed : 0 for physical pages grow with virtual pages, other for virtual pages map to same physical page.
*
* @return uint32_t: error status
* 0 : mmu set success
* 1 : vaddr or paddr is not aligned
* 3 : psize error
* 5 : vaddr is out of range
*/
int Cache_Ibus_MMU_Set(uint32_t ext_ram, uint32_t vaddr, uint32_t paddr, uint32_t psize, uint32_t num, uint32_t fixed);
/**
* @brief Set DCache mmu mapping.
* Please do not call this function in your SDK application.
*
* @param uint32_t ext_ram : DPORT_MMU_ACCESS_FLASH for flash, DPORT_MMU_ACCESS_SPIRAM for spiram, DPORT_MMU_INVALID for invalid.
*
* @param uint32_t vaddr : virtual address in CPU address space.
* Can be DRam0, DRam1, DRom0, DPort and AHB buses address.
* Should be aligned by psize.
*
* @param uint32_t paddr : physical address in external memory.
* Should be aligned by psize.
*
* @param uint32_t psize : page size of DCache, in kilobytes. Should be 64 here.
*
* @param uint32_t num : pages to be set.
* @param uint32_t fixed : 0 for physical pages grow with virtual pages, other for virtual pages map to same physical page.
*
* @return uint32_t: error status
* 0 : mmu set success
* 1 : vaddr or paddr is not aligned
* 3 : psize error
* 5 : vaddr is out of range
*/
int Cache_Dbus_MMU_Set(uint32_t ext_ram, uint32_t vaddr, uint32_t paddr, uint32_t psize, uint32_t num, uint32_t fixed);
/**
* @brief Copy DRom0 ICache MMU to DCache MMU.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void MMU_Drom0_I2D_Copy(void);
/**
* @brief Unmap DRom0 ICache MMU.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void MMU_Drom_ICache_Unmap(void);
/**
* @brief Count the pages in the bus room address which map to Flash.
* Please do not call this function in your SDK application.
*
* @param uint32_t bus : the bus to count with.
*
* @param uint32_t * page0_mapped : value should be initial by user, 0 for not mapped, other for mapped count.
*
* return uint32_t : the number of pages which map to Flash.
*/
uint32_t Cache_Count_Flash_Pages(uint32_t bus, uint32_t * page0_mapped);
/**
* @brief Copy Instruction or rodata from Flash to SPIRAM, and remap to SPIRAM.
* Please do not call this function in your SDK application.
*
* @param uint32_t bus : the bus which need to copy to SPIRAM.
*
* @param uint32_t bus_start_addr : the start virtual address for the bus.
*
* @param uint32_t start_page : the start (64KB) page number in SPIRAM.
*
* @param uint32_t * page0_page : the flash page0 in SPIRAM page number, 0xffff for invalid.
*
* return uint32_t : the next start page number for SPIRAM not mapped.
*/
uint32_t Cache_Flash_To_SPIRAM_Copy(uint32_t bus, uint32_t bus_start_addr, uint32_t start_page, uint32_t * page0_page);
/**
* @brief allocate memory to used by ICache and DCache.
* Please do not call this function in your SDK application.
*
* @param cache_layout_t sram0_layout : the usage of first 8KB internal memory block, can be CACHE_MEMORY_INVALID, CACHE_MEMORY_ICACHE_LOW, CACHE_MEMORY_ICACHE_HIGH, CACHE_MEMORY_DCACHE_LOW and CACHE_MEMORY_DCACHE_HIGH
*
* @param cache_layout_t sram1_layout : the usage of second 8KB internal memory block
*
* @param cache_layout_t sram2_layout : the usage of third 8KB internal memory block
*
* @param cache_layout_t sram3_layout : the usage of forth 8KB internal memory block
*
* return none
*/
void Cache_Allocate_SRAM(cache_layout_t sram0_layout, cache_layout_t sram1_layout, cache_layout_t sram2_layout, cache_layout_t sram3_layout);
/**
* @brief Get cache mode of ICache or DCache.
* Please do not call this function in your SDK application.
*
* @param struct cache_mode * mode : the pointer of cache mode struct
*
* return none
*/
void Cache_Get_Mode(struct cache_mode * mode);
/**
* @brief set ICache modes: cache size, associate ways and cache line size.
* Please do not call this function in your SDK application.
*
* @param cache_size_t cache_size : the cache size, can be CACHE_SIZE_8KB and CACHE_SIZE_16KB
*
* @param cache_ways_t ways : the associate ways of cache, cane be CACHE_4WAYS_ASSOC and CACHE_8WAYS_ASSOC
*
* @param cache_line_size_t cache_line_size : the cache line size, can be CACHE_LINE_SIZE_16B, CACHE_LINE_SIZE_32B and CACHE_LINE_SIZE_64B
*
* @param cache_layout_t sram3_layout : the usage of forth 8KB internal memory block
*
* return none
*/
void Cache_Set_ICache_Mode(cache_size_t cache_size, cache_ways_t ways, cache_line_size_t cache_line_size);
/**
* @brief set DCache modes: cache size, associate ways and cache line size.
* Please do not call this function in your SDK application.
*
* @param cache_size_t cache_size : the cache size, can be CACHE_SIZE_8KB and CACHE_SIZE_16KB
*
* @param cache_ways_t ways : the associate ways of cache, cane be CACHE_4WAYS_ASSOC and CACHE_8WAYS_ASSOC
*
* @param cache_line_size_t cache_line_size : the cache line size, can be CACHE_LINE_SIZE_16B, CACHE_LINE_SIZE_32B and CACHE_LINE_SIZE_64B
*
* @param cache_layout_t sram3_layout : the usage of forth 8KB internal memory block
*
* return none
*/
void Cache_Set_DCache_Mode(cache_size_t cache_size, cache_ways_t ways, cache_line_size_t cache_line_size);
/**
* @brief check if the address is accessed through ICache.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr : the address to check.
*
* @return 1 if the address is accessed through ICache, 0 if not.
*/
uint32_t Cache_Address_Through_ICache(uint32_t addr);
/**
* @brief check if the address is accessed through DCache.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr : the address to check.
*
* @return 1 if the address is accessed through DCache, 0 if not.
*/
uint32_t Cache_Address_Through_DCache(uint32_t addr);
/**
* @brief Invalidate the cache items for ICache.
* Operation will be done CACHE_LINE_SIZE aligned.
* If the addr is not in our addr room, we will Flush all Cache.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr: start address to invalidate
*
* @param uint32_t size: size to invalidate, should <= 4MB
*
* @return None
*/
void Cache_Invalidate_ICache_Items(uint32_t addr, uint32_t size);
/**
* @brief Invalidate the cache items for DCache.
* Operation will be done CACHE_LINE_SIZE aligned.
* If the addr is not in our addr room, we will Flush all Cache.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr: start address to invalidate
*
* @param uint32_t size: size to invalidate, should <= 4MB
*
* @return None
*/
void Cache_Invalidate_DCache_Items(uint32_t addr, uint32_t size);
/**
* @brief Clean the dirty bit of cache Items of DCache.
* Operation will be done CACHE_LINE_SIZE aligned.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr: start address to Clean
*
* @param uint32_t size: size to Clean, should <= 4MB
*
* @return None
*/
void Cache_Clean_Items(uint32_t addr, uint32_t size);
/**
* @brief Write back the cache items of DCache.
* Operation will be done CACHE_LINE_SIZE aligned.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr: start address to write back
*
* @param uint32_t size: size to write back, should <= 4MB
*
* @return None
*/
void Cache_WriteBack_Items(uint32_t addr, uint32_t size);
/**
* @brief Invalidate the Cache items in the region from ICache or DCache.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr : invalidated region start address.
*
* @param uint32_t size : invalidated region size.
*
* @return None
*/
void Cache_Invalidate_Addr(uint32_t addr, uint32_t size);
/**
* @brief Clean the dirty bit of Cache items in the region from DCache.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr : cleaned region start address.
*
* @param uint32_t size : cleaned region size.
*
* @return None
*/
void Cache_Clean_Addr(uint32_t addr, uint32_t size);
/**
* @brief Writeback the Cache items(also clean the dirty bit) in the region from DCache.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr : writeback region start address.
*
* @param uint32_t size : writeback region size.
*
* @return None
*/
void Cache_WriteBack_Addr(uint32_t addr, uint32_t size);
/**
* @brief Invalidate all cache items in ICache.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void Cache_Invalidate_ICache_All(void);
/**
* @brief Invalidate all cache items in DCache.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void Cache_Invalidate_DCache_All(void);
/**
* @brief Clean the dirty bit of all cache items in DCache.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void Cache_Clean_All(void);
/**
* @brief WriteBack all cache items in DCache.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void Cache_WriteBack_All(void);
/**
* @brief Mask all buses through ICache and DCache.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void Cache_Mask_All(void);
/**
* @brief UnMask DRom0 bus through ICache or DCache.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void Cache_UnMask_Drom0(void);
/**
* @brief Suspend ICache auto preload operation, then you can resume it after some ICache operations.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return uint32_t : 0 for ICache not auto preload before suspend.
*/
uint32_t Cache_Suspend_ICache_Autoload(void);
/**
* @brief Resume ICache auto preload operation after some ICache operations.
* Please do not call this function in your SDK application.
*
* @param uint32_t autoload : 0 for ICache not auto preload before suspend.
*
* @return None.
*/
void Cache_Resume_ICache_Autoload(uint32_t autoload);
/**
* @brief Suspend DCache auto preload operation, then you can resume it after some DCache operations.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return uint32_t : 0 for DCache not auto preload before suspend.
*/
uint32_t Cache_Suspend_DCache_Autoload(void);
/**
* @brief Resume DCache auto preload operation after some DCache operations.
* Please do not call this function in your SDK application.
*
* @param uint32_t autoload : 0 for DCache not auto preload before suspend.
*
* @return None.
*/
void Cache_Resume_DCache_Autoload(uint32_t autoload);
/**
* @brief Start an ICache manual preload, will suspend auto preload of ICache.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr : start address of the preload region.
*
* @param uint32_t size : size of the preload region, should not exceed the size of ICache.
*
* @param uint32_t order : the preload order, 0 for positive, other for negative
*
* @return uint32_t : 0 for ICache not auto preload before manual preload.
*/
uint32_t Cache_Start_ICache_Preload(uint32_t addr, uint32_t size, uint32_t order);
/**
* @brief Return if the ICache manual preload done.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return uint32_t : 0 for ICache manual preload not done.
*/
uint32_t Cache_ICache_Preload_Done(void);
/**
* @brief End the ICache manual preload to resume auto preload of ICache.
* Please do not call this function in your SDK application.
*
* @param uint32_t autoload : 0 for ICache not auto preload before manual preload.
*
* @return None
*/
void Cache_End_ICache_Preload(uint32_t autoload);
/**
* @brief Start an DCache manual preload, will suspend auto preload of DCache.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr : start address of the preload region.
*
* @param uint32_t size : size of the preload region, should not exceed the size of DCache.
*
* @param uint32_t order : the preload order, 0 for positive, other for negative
*
* @return uint32_t : 0 for DCache not auto preload before manual preload.
*/
uint32_t Cache_Start_DCache_Preload(uint32_t addr, uint32_t size, uint32_t order);
/**
* @brief Return if the DCache manual preload done.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return uint32_t : 0 for DCache manual preload not done.
*/
uint32_t Cache_DCache_Preload_Done(void);
/**
* @brief End the DCache manual preload to resume auto preload of DCache.
* Please do not call this function in your SDK application.
*
* @param uint32_t autoload : 0 for DCache not auto preload before manual preload.
*
* @return None
*/
void Cache_End_DCache_Preload(uint32_t autoload);
/**
* @brief Config autoload parameters of ICache.
* Please do not call this function in your SDK application.
*
* @param struct autoload_config * config : autoload parameters.
*
* @return None
*/
void Cache_Config_ICache_Autoload(const struct autoload_config * config);
/**
* @brief Enable auto preload for ICache.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void Cache_Enable_ICache_Autoload(void);
/**
* @brief Disable auto preload for ICache.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void Cache_Disable_ICache_Autoload(void);
/**
* @brief Config autoload parameters of DCache.
* Please do not call this function in your SDK application.
*
* @param struct autoload_config * config : autoload parameters.
*
* @return None
*/
void Cache_Config_DCache_Autoload(const struct autoload_config * config);
/**
* @brief Enable auto preload for DCache.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void Cache_Enable_DCache_Autoload(void);
/**
* @brief Disable auto preload for DCache.
* Please do not call this function in your SDK application.
*
* @param None
*
* @return None
*/
void Cache_Disable_DCache_Autoload(void);
/**
* @brief Config a group of lock parameters of ICache.
* Please do not call this function in your SDK application.
*
* @param struct lock_config * config : a group of lock parameters.
*
* @return None
*/
void Cache_Enable_ICache_Lock(const struct lock_config *config);
/**
* @brief Disable a group of lock parameters for ICache.
* However, the locked data will not be released.
* Please do not call this function in your SDK application.
*
* @param uint16_t group : 0 for group0, 1 for group1.
*
* @return None
*/
void Cache_Disable_ICache_Lock(uint16_t group);
/**
* @brief Unlock the cache items in tag memory for ICache.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr : start address of unlock region.
*
* @param uint32_t size : size of unlock region.
*
* @return None
*/
void Cache_Unlock_ICache(uint32_t addr, uint32_t size);
/**
* @brief Config a group of lock parameters of DCache.
* Please do not call this function in your SDK application.
*
* @param struct lock_config * config : a group of lock parameters.
*
* @return None
*/
void Cache_Enable_DCache_Lock(const struct lock_config *config);
/**
* @brief Disable a group of lock parameters for DCache.
* However, the locked data will not be released.
* Please do not call this function in your SDK application.
*
* @param uint16_t group : 0 for group0, 1 for group1.
*
* @return None
*/
void Cache_Disable_DCache_Lock(uint16_t group);
/**
* @brief Unlock the cache items in tag memory for DCache.
* Please do not call this function in your SDK application.
*
* @param uint32_t addr : start address of unlock region.
*
* @param uint32_t size : size of unlock region.
*
* @return None
*/
void Cache_Unlock_DCache(uint32_t addr, uint32_t size);
/**
* @brief Disable ICache access for the cpu.
* This operation will make all ICache tag memory invalid, CPU can't access ICache, ICache will keep idle.
* Please do not call this function in your SDK application.
*
* @return uint32_t : auto preload enabled before
*/
uint32_t Cache_Disable_ICache(void);
/**
* @brief Enable ICache access for the cpu.
* Please do not call this function in your SDK application.
*
* @param uint32_t autoload : ICache will preload then.
*
* @return None
*/
void Cache_Enable_ICache(uint32_t autoload);
/**
* @brief Disable DCache access for the cpu.
* This operation will make all DCache tag memory invalid, CPU can't access DCache, DCache will keep idle
* Please do not call this function in your SDK application.
*
* @return uint32_t : auto preload enabled before
*/
uint32_t Cache_Disable_DCache(void);
/**
* @brief Enable DCache access for the cpu.
* Please do not call this function in your SDK application.
*
* @param uint32_t autoload : DCache will preload then.
*
* @return None
*/
void Cache_Enable_DCache(uint32_t autoload);
/**
* @brief Suspend ICache access for the cpu.
* The ICache tag memory is still there, CPU can't access ICache, ICache will keep idle.
* Please do not change MMU, cache mode or tag memory(tag memory can be changed in some special case).
* Please do not call this function in your SDK application.
*
* @param None
*
* @return uint32_t : auto preload enabled before
*/
uint32_t Cache_Suspend_ICache(void);
/**
* @brief Resume ICache access for the cpu.
* Please do not call this function in your SDK application.
*
* @param uint32_t autoload : ICache will preload then.
*
* @return None
*/
void Cache_Resume_ICache(uint32_t autoload);
/**
* @brief Suspend DCache access for the cpu.
* The ICache tag memory is still there, CPU can't access DCache, DCache will keep idle.
× Please do not change MMU, cache mode or tag memory(tag memory can be changed in some special case).
* Please do not call this function in your SDK application.
*
* @param None
*
* @return uint32_t : auto preload enabled before
*/
uint32_t Cache_Suspend_DCache(void);
/**
* @brief Resume DCache access for the cpu.
* Please do not call this function in your SDK application.
*
* @param uint32_t autoload : DCache will preload then.
*
* @return None
*/
void Cache_Resume_DCache(uint32_t autoload);
/**
* @brief Make Drom0 bus access from ICache.
*
* @param None
*
* @return None
*/
void Cache_Drom0_Source_ICache();
/**
* @brief Make Drom0 bus access from DCache.
*
* @param None
*
* @return None
*/
void Cache_Drom0_Source_DCache();
/**
* @brief Return if Drom0 bus access from ICache.
*
* @param None
*
* @return uint32_t: 0 for no, other for yes
*/
uint32_t Cache_Drom0_Using_ICache();
/**
* @brief Return if Drom0 bus access from DCache.
*
* @param None
*
* @return uint32_t: 0 for no, other for yes
*/
uint32_t Cache_Drom0_Using_DCache();
/**
* @brief Get ICache cache line size
*
* @param None
*
* @return uint32_t: 16, 32, 64 Byte
*/
uint32_t Cache_Get_ICache_Line_Size();
/**
* @brief Get DCache cache line size
*
* @param None
*
* @return uint32_t: 16, 32, 64 Byte
*/
uint32_t Cache_Get_DCache_Line_Size();
/**
* @brief Set default mode from boot.
*
* @param None
*
* @return None
*/
void Cache_Set_Default_Mode(void);
/**
* @brief Travel tag memory to run a call back function.
* ICache and DCache are suspend when doing this.
* The callback will get the parameter tag_group_info, which will include a group of tag memory addresses and cache memory addresses.
* Please do not call this function in your SDK application.
*
* @param struct cache_mode * mode : the cache to check and the cache mode.
*
* @param uint32_t filter_addr : only the cache lines which may include the filter_address will be returned to the call back function.
* 0 for do not filter, all cache lines will be returned.
*
* @param void (* process)(struct tag_group_info *) : call back function, which may be called many times, a group(the addresses in the group are in the same position in the cache ways) a time.
*
* @return None
*/
void Cache_Travel_Tag_Memory(struct cache_mode * mode, uint32_t filter_addr, void (* process)(struct tag_group_info *));
/**
* @brief Get the virtual address from cache mode, cache tag and the virtual address offset of cache ways.
* Please do not call this function in your SDK application.
*
* @param struct cache_mode * mode : the cache to calculate the virtual address and the cache mode.
*
* @param uint32_t tag : the tag part fo a tag item, 12-14 bits.
*
* @param uint32_t addr_offset : the virtual address offset of the cache ways.
*
* @return uint32_t : the virtual address.
*/
uint32_t Cache_Get_Virtual_Addr(struct cache_mode *mode, uint32_t tag, uint32_t vaddr_offset);
/**
* @brief Get cache memory block base address.
* Please do not call this function in your SDK application.
*
* @param uint32_t icache : 0 for dcache, other for icache.
*
* @param uint32_t high : 0 for low part block, 1 for high part block.
*
* @return uint32_t : the cache memory block base address, 0 if the block not used.
*/
uint32_t Cache_Get_Memory_BaseAddr(uint32_t icache, uint32_t high);
/**
* @brief Get the cache memory address from cache mode, cache memory offset and the virtual address offset of cache ways.
* Please do not call this function in your SDK application.
*
* @param struct cache_mode * mode : the cache to calculate the virtual address and the cache mode.
*
* @param uint32_t cache_memory_offset : the cache memory offset of the whole cache (ICache or DCache) for the cache line.
*
* @param uint32_t addr_offset : the virtual address offset of the cache ways.
*
* @return uint32_t : the virtual address.
*/
uint32_t Cache_Get_Memory_Addr(struct cache_mode *mode, uint32_t cache_memory_offset, uint32_t vaddr_offset);
/**
* @brief Get the cache memory value by DRAM address.
* Please do not call this function in your SDK application.
*
* @param uint32_t cache_memory_addr : DRAM address for the cache memory.
*
* @return uint32_t : the word value of the address.
*/
uint32_t Cache_Get_Memory_value(uint32_t cache_memory_addr);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* _ROM_CACHE_H_ */