OVMS3-idf/components/esp32/include/esp_system.h
2016-08-17 23:08:22 +08:00

364 lines
10 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __ESP_SYSTEM_H__
#define __ESP_SYSTEM_H__
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/** \defgroup System_APIs System APIs
* @brief System APIs
*/
/** @addtogroup System_APIs
* @{
*/
/**
* @brief Get information of the SDK version.
*
* @param null
*
* @return Information of the SDK version.
*/
const char *system_get_sdk_version(void);
/**
* @brief Reset to default settings.
*
* Reset to default settings of the following APIs : wifi_station_set_auto_connect,
* wifi_set_phy_mode, wifi_softap_set_config related, wifi_station_set_config
* related, and wifi_set_opmode.
*
* @param null
*
* @return null
*/
void system_restore(void);
/**
* @brief Restart system.
*
* @param null
*
* @return null
*/
void system_restart(void);
/**
* @brief Set the chip to deep-sleep mode.
*
* The device will automatically wake up after the deep-sleep time set
* by the users. Upon waking up, the device boots up from user_init.
*
* @attention The parameter time_in_us to be "uint64" is for further development.
* Only the low 32 bits of parameter time_in_us are avalable now.
*
* @param uint64 time_in_us : deep-sleep time, only the low 32bits are avalable now. unit: microsecond
*
* @return null
*/
void system_deep_sleep(uint64_t time_in_us);
/**
* @brief Get system time, unit: microsecond.
*
* @param null
*
* @return System time, unit: microsecond.
*/
uint32_t system_get_time(void);
/**
* @brief Print the system memory distribution, including data/rodata/bss/heap.
*
* @param null
*
* @return null
*/
void system_print_meminfo(void);
/**
* @brief Get the size of available heap.
*
* @param null
*
* @return Available heap size.
*/
uint32_t system_get_free_heap_size(void);
/**
* @brief Get the chip ID.
*
* Example:
* <pre>
* uint8 chip_id[6];
* system_get_chip_id(chip_id);
* </pre>
*
* @param uint8 *chip_id : the chip ID
*
* @return true : succeed
* @return false : fail
*/
bool system_get_chip_id(uint8_t *chip_id);
/**
* @brief Get RTC time, unit: RTC clock cycle.
*
* @param null
*
* @return RTC time.
*/
uint64_t system_get_rtc_time(void);
/**
* @brief Read user data from the RTC memory.
*
* The user data segment (1024 bytes, as shown below) is used to store user data.
*
* |<---- system data(512 bytes) ---->|<----------- user data(1024 bytes) --------->|
*
* @attention Read and write unit for data stored in the RTC memory is 4 bytes.
* @attention src_addr is the block number (4 bytes per block). So when reading data
* at the beginning of the user data segment, src_addr will be 512/4 = 128,
* n will be data length.
*
* @param uint16 src : source address of rtc memory, src_addr >= 128
* @param void *dst : data pointer
* @param uint16 n : data length, unit: byte
*
* @return true : succeed
* @return false : fail
*/
bool system_rtc_mem_read(uint16_t src, void *dst, uint16_t n);
/**
* @brief Write user data to the RTC memory.
*
* During deep-sleep, only RTC is working. So users can store their data
* in RTC memory if it is needed. The user data segment below (1024 bytes)
* is used to store the user data.
*
* |<---- system data(512 bytes) ---->|<----------- user data(1024 bytes) --------->|
*
* @attention Read and write unit for data stored in the RTC memory is 4 bytes.
* @attention src_addr is the block number (4 bytes per block). So when storing data
* at the beginning of the user data segment, src_addr will be 512/4 = 128,
* n will be data length.
*
* @param uint16 src : source address of rtc memory, src_addr >= 128
* @param void *dst : data pointer
* @param uint16 n : data length, unit: byte
*
* @return true : succeed
* @return false : fail
*/
bool system_rtc_mem_write(uint16_t dst, const void *src, uint16_t n);
typedef enum {
ADC1_PAD_GPIO36 = 0,
ADC1_PAD_GPIO37,
ADC1_PAD_GPIO38,
ADC1_PAD_GPIO39,
ADC1_PAD_GPIO32,
ADC1_PAD_GPIO33,
ADC1_PAD_GPIO34,
ADC1_PAD_GPIO35
} adc1_read_pad_t;
typedef enum {
ADC1_ATTEN_0DB = 0,
ADC1_ATTEN_3DB,
ADC1_ATTEN_6DB,
ADC1_ATTEN_12DB
} adc1_read_atten_t;
/**
* @brief Read ADC1.
*
* @param adc1_read_pad pad : the corresponding GPIO
* @param adc1_read_atten atten : value of attenuation
*
* @return range of the return value is [0, 4096].
* - If atten == 0, the range of voltage can be measured is [0, 1] V.
* - If atten == 1, the range of voltage can be measured is [0, 1.4] V.
* - If atten == 2, the range of voltage can be measured is [0, 2] V.
* - If atten == 3, the range of voltage can be measured is [0, 4] V.
*/
uint16_t system_adc1_read(adc1_read_pad_t pad, adc1_read_atten_t atten);
/**
* @brief Measure the power voltage of VDD3P3 pin 3 and 4, unit : 1/1024 V.
*
* @attention system_get_vdd33 depends on RF, please do not use it if RF is disabled.
*
* @param null
*
* @return Power voltage of VDD33, unit : 1/1024 V
*/
uint16_t system_get_vdd33(void);
/**
* @brief Write data into flash with protection.
*
* Flash read/write has to be 4-bytes aligned.
*
* Protection of flash read/write :
* use 3 sectors (4KBytes per sector) to save 4KB data with protect,
* sector 0 and sector 1 are data sectors, back up each other,
* save data alternately, sector 2 is flag sector, point out which sector
* is keeping the latest data, sector 0 or sector 1.
*
* @param uint16 start_sec : start sector (sector 0) of the 3 sectors which are
* used for flash read/write protection.
* - For example, in IOT_Demo we can use the 3 sectors (3 * 4KB) starting from flash
* 0x3D000 for flash read/write protection, so the parameter start_sec should be 0x3D
* @param void *param : pointer of the data to be written
* @param uint16 len : data length, should be less than a sector, which is 4 * 1024
*
* @return true : succeed
* @return false : fail
*/
bool system_param_save_with_protect(uint16_t start_sec, void *param, uint16_t len);
/**
* @brief Read the data saved into flash with the read/write protection.
*
* Flash read/write has to be 4-bytes aligned.
*
* Read/write protection of flash:
* use 3 sectors (4KB per sector) to save 4KB data with protect, sector
* 0 and sector 1 are data sectors, back up each other, save data alternately,
* sector 2 is flag sector, point out which sector is keeping the latest data,
* sector 0 or sector 1.
*
* @param uint16 start_sec : start sector (sector 0) of the 3 sectors used for
* flash read/write protection. It cannot be sector 1 or sector 2.
* - For example, in IOT_Demo, the 3 sectors (3 * 4KB) starting from flash 0x3D000
* can be used for flash read/write protection.
* The parameter start_sec is 0x3D, and it cannot be 0x3E or 0x3F.
* @param uint16 offset : offset of data saved in sector
* @param void *param : data pointer
* @param uint16 len : data length, offset + len =< 4 * 1024
*
* @return true : succeed
* @return false : fail
*/
bool system_param_load(uint16_t start_sec, uint16_t offset, void *param, uint16_t len);
/** \defgroup System_boot_APIs Boot APIs
* @brief boot APIs
*/
/** @addtogroup System_boot_APIs
* @{
*/
/**
* @}
*/
/** \defgroup Hardware_MAC_APIs Hardware MAC APIs
* @brief Hardware MAC address APIs
*
* In WiFi MAC, only ESP32 station MAC is the hardware MAC, ESP32 softAP MAC is a software MAC
* calculated from ESP32 station MAC.
* So users need to call wifi_get_macaddr to query the ESP32 softAP MAC if ESP32 station MAC changed.
*
*/
/** @addtogroup Hardware_MAC_APIs
* @{
*/
typedef enum {
DEFAULT_MAC = 0, /**< Default hardware MAC provided by Espressif Systems */
USER_MAC, /**< User-define hardware MAC */
} mac_group_t;
typedef enum {
WIFI_MAC = 0, /**< Hardware MAC address of ESP32 WiFi */
BT_MAC, /**< Hardware MAC address of ESP32 bluetooth */
} mac_type_t;
/**
* @brief Set user-define hardware MAC address.
*
* @attention Hardware MAC address can only be set ONCE for each ESP32 chip.
*
* @param mac_type type : type of hardware MAC address.
* @param uint8 *mac : user-define hardware MAC address, length: 6 bytes.
*
* @return 0 : succeed to set.
* @return 1 : the hardware MAC has been set once, users can not set it any more.
* @return 2 : fail to set.
* @return 3 : invalid parameter.
*/
int system_efuse_program_user_mac(mac_type_t type, uint8_t *mac);
/**
* @brief Read hardware MAC address.
*
* @param mac_group group : default MAC or user-defined MAC.
* @param mac_type type : type of hardware MAC address.
* @param uint8 *mac : the hardware MAC address, length: 6 bytes.
*
* @return true : succeed
* @return false : fail
*/
bool system_efuse_read_mac(mac_group_t group, mac_type_t type, uint8_t *mac);
/**
* @brief Set hardware MAC group, default MAC or user-defined MAC.
*
* @attention This API needs system_restart to take effect.
*
* @param mac_group group : default MAC or user-defined MAC.
*
* @return true : succeed
* @return false : fail
*/
bool system_efuse_set_mac_group(mac_group_t group);
/**
* @brief Get hardware MAC group, default MAC or user-defined MAC.
*
* @param null
*
* @return mac_group, the hardware MAC group.
*/
mac_group_t system_efuse_get_mac_group(void);
void system_init(void);
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __ESP_SYSTEM_H__ */