Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
OVMS3-idf/components/mbedtls/port/include/esp32s2beta/aes.h
Marius Vikhammer c63684cf6c hw crypto: activated hardware acceleration for esp32s2beta 
Activated AES, RSA and SHA hardware acceleration for esp32s2 and enabled related unit tests.

Updated with changes made for ESP32 from 0a04034, 961f59f and caea288.

Added performance targets for esp32s2beta

Closes IDF-757
2019-12-12 12:37:29 +08:00

368 lines
13 KiB
C
Raw Blame History

/**
* \brief AES block cipher, ESP32 hardware accelerated version
* Based on mbedTLS FIPS-197 compliant version.
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* Additions Copyright (C) 2016, Espressif Systems (Shanghai) PTE Ltd
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*
*/
#ifndef ESP_AES_H
#define ESP_AES_H
#include "esp_types.h"
#include "esp32s2beta/rom/aes.h"
#ifdef __cplusplus
extern "C" {
#endif
/* padlock.c and aesni.c rely on these values! */
#define ESP_AES_ENCRYPT 1
#define ESP_AES_DECRYPT 0
#define ERR_ESP_AES_INVALID_KEY_LENGTH -0x0020 /**< Invalid key length. */
#define ERR_ESP_AES_INVALID_INPUT_LENGTH -0x0022 /**< Invalid data input length. */
/**
* \brief AES context structure
*
* \note buf is able to hold 32 extra bytes, which can be used:
* - for alignment purposes if VIA padlock is used, and/or
* - to simplify key expansion in the 256-bit case by
* generating an extra round key
*/
typedef struct {
uint8_t key_bytes;
volatile uint8_t key_in_hardware; /* This variable is used for fault injection checks, so marked volatile to avoid optimisation */
uint8_t key[32];
} esp_aes_context;
/**
* \brief The AES XTS context-type definition.
*/
typedef struct
{
esp_aes_context crypt; /*!< The AES context to use for AES block
encryption or decryption. */
esp_aes_context tweak; /*!< The AES context used for tweak
computation. */
} esp_aes_xts_context;
/**
* \brief Lock access to AES hardware unit
*
* AES hardware unit can only be used by one
* consumer at a time.
*
* esp_aes_xxx API calls automatically manage locking & unlocking of
* hardware, this function is only needed if you want to call
* ets_aes_xxx functions directly.
*/
void esp_aes_acquire_hardware( void );
/**
* \brief Unlock access to AES hardware unit
*
* esp_aes_xxx API calls automatically manage locking & unlocking of
* hardware, this function is only needed if you want to call
* ets_aes_xxx functions directly.
*/
void esp_aes_release_hardware( void );
/**
* \brief Initialize AES context
*
* \param ctx AES context to be initialized
*/
void esp_aes_init( esp_aes_context *ctx );
/**
* \brief Clear AES context
*
* \param ctx AES context to be cleared
*/
void esp_aes_free( esp_aes_context *ctx );
/*
* \brief This function initializes the specified AES XTS context.
*
* It must be the first API called before using
* the context.
*
* \param ctx The AES XTS context to initialize.
*/
void esp_aes_xts_init( esp_aes_xts_context *ctx );
/**
* \brief This function releases and clears the specified AES XTS context.
*
* \param ctx The AES XTS context to clear.
*/
void esp_aes_xts_free( esp_aes_xts_context *ctx );
/**
* \brief AES set key schedule (encryption or decryption)
*
* \param ctx AES context to be initialized
* \param key encryption key
* \param keybits must be 128, 192 or 256
*
* \return 0 if successful, or ERR_AES_INVALID_KEY_LENGTH
*/
/**
* \brief AES set key schedule (encryption or decryption)
*
* \param ctx AES context to be initialized
* \param key encryption key
* \param keybits must be 128, 192 or 256
*
* \return 0 if successful, or ERR_AES_INVALID_KEY_LENGTH
*/
int esp_aes_setkey( esp_aes_context *ctx, const unsigned char *key, unsigned int keybits );
/**
* \brief AES-ECB block encryption/decryption
*
* \param ctx AES context
* \param mode AES_ENCRYPT or AES_DECRYPT
* \param input 16-byte input block
* \param output 16-byte output block
*
* \return 0 if successful
*/
int esp_aes_crypt_ecb( esp_aes_context *ctx, int mode, const unsigned char input[16], unsigned char output[16] );
/**
* \brief AES-CBC buffer encryption/decryption
* Length should be a multiple of the block
* size (16 bytes)
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx AES context
* \param mode AES_ENCRYPT or AES_DECRYPT
* \param length length of the input data
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \return 0 if successful, or ERR_AES_INVALID_INPUT_LENGTH
*/
int esp_aes_crypt_cbc( esp_aes_context *ctx,
int mode,
size_t length,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
/**
* \brief AES-CFB128 buffer encryption/decryption.
*
* Note: Due to the nature of CFB you should use the same key schedule for
* both encryption and decryption. So a context initialized with
* esp_aes_setkey_enc() for both AES_ENCRYPT and AES_DECRYPT.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx AES context
* \param mode AES_ENCRYPT or AES_DECRYPT
* \param length length of the input data
* \param iv_off offset in IV (updated after use)
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \return 0 if successful
*/
int esp_aes_crypt_cfb128( esp_aes_context *ctx,
int mode,
size_t length,
size_t *iv_off,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
/**
* \brief AES-CFB8 buffer encryption/decryption.
*
* Note: Due to the nature of CFB you should use the same key schedule for
* both encryption and decryption. So a context initialized with
* esp_aes_setkey_enc() for both AES_ENCRYPT and AES_DECRYPT.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx AES context
* \param mode AES_ENCRYPT or AES_DECRYPT
* \param length length of the input data
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \return 0 if successful
*/
int esp_aes_crypt_cfb8( esp_aes_context *ctx,
int mode,
size_t length,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
/**
* \brief AES-CTR buffer encryption/decryption
*
* Warning: You have to keep the maximum use of your counter in mind!
*
* Note: Due to the nature of CTR you should use the same key schedule for
* both encryption and decryption. So a context initialized with
* esp_aes_setkey_enc() for both AES_ENCRYPT and AES_DECRYPT.
*
* \param ctx AES context
* \param length The length of the data
* \param nc_off The offset in the current stream_block (for resuming
* within current cipher stream). The offset pointer to
* should be 0 at the start of a stream.
* \param nonce_counter The 128-bit nonce and counter.
* \param stream_block The saved stream-block for resuming. Is overwritten
* by the function.
* \param input The input data stream
* \param output The output data stream
*
* \return 0 if successful
*/
int esp_aes_crypt_ctr( esp_aes_context *ctx,
size_t length,
size_t *nc_off,
unsigned char nonce_counter[16],
unsigned char stream_block[16],
const unsigned char *input,
unsigned char *output );
/**
* \brief This function performs an AES-OFB (Output Feedback Mode)
* encryption or decryption operation.
*
* \param ctx The AES context to use for encryption or decryption.
* It must be initialized and bound to a key.
* \param length The length of the input data.
* \param iv_off The offset in IV (updated after use).
* It must point to a valid \c size_t.
* \param iv The initialization vector (updated after use).
* It must be a readable and writeable buffer of \c 16 Bytes.
* \param input The buffer holding the input data.
* It must be readable and of size \p length Bytes.
* \param output The buffer holding the output data.
* It must be writeable and of size \p length Bytes.
*
* \return \c 0 on success.
*/
int esp_aes_crypt_ofb( esp_aes_context *ctx,
size_t length,
size_t *iv_off,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
/**
* \brief This function prepares an XTS context for encryption and
* sets the encryption key.
*
* \param ctx The AES XTS context to which the key should be bound.
* \param key The encryption key. This is comprised of the XTS key1
* concatenated with the XTS key2.
* \param keybits The size of \p key passed in bits. Valid options are:
* <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li>
* <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul>
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure.
*/
int esp_aes_xts_setkey_enc( esp_aes_xts_context *ctx,
const unsigned char *key,
unsigned int keybits );
/**
* \brief Internal AES block encryption function
* (Only exposed to allow overriding it,
* see AES_ENCRYPT_ALT)
*
* \param ctx AES context
* \param input Plaintext block
* \param output Output (ciphertext) block
*/
int esp_aes_xts_setkey_dec( esp_aes_xts_context *ctx,
const unsigned char *key,
unsigned int keybits );
/**
* \brief Internal AES block encryption function
* (Only exposed to allow overriding it,
* see AES_ENCRYPT_ALT)
*
* \param ctx AES context
* \param input Plaintext block
* \param output Output (ciphertext) block
*/
int esp_internal_aes_encrypt( esp_aes_context *ctx, const unsigned char input[16], unsigned char output[16] );
/** Deprecated, see esp_aes_internal_encrypt */
void esp_aes_encrypt( esp_aes_context *ctx, const unsigned char input[16], unsigned char output[16] ) __attribute__((deprecated));
/**
* \brief Internal AES block decryption function
* (Only exposed to allow overriding it,
* see AES_DECRYPT_ALT)
*
* \param ctx AES context
* \param input Ciphertext block
* \param output Output (plaintext) block
*/
int esp_internal_aes_decrypt( esp_aes_context *ctx, const unsigned char input[16], unsigned char output[16] );
/** Deprecated, see esp_aes_internal_decrypt */
void esp_aes_decrypt( esp_aes_context *ctx, const unsigned char input[16], unsigned char output[16] ) __attribute__((deprecated));
/** AES-XTS buffer encryption/decryption */
int esp_aes_crypt_xts( esp_aes_xts_context *ctx, int mode, size_t length, const unsigned char data_unit[16], const unsigned char *input, unsigned char *output );
#ifdef __cplusplus
}
#endif
#endif /* aes.h */
Reference in a new issue View git blame Copy permalink