1. separate rom include files and linkscript to esp_rom 2. modefiy "include rom/xxx.h" to "include esp32/rom/xxx.h" 3. Forward compatible 4. update mqtt
294 lines
9.9 KiB
C
294 lines
9.9 KiB
C
|
|
#include <esp_types.h>
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include "esp32/rom/ets_sys.h"
|
|
#include "esp32/rom/lldesc.h"
|
|
#include "esp32/rom/gpio.h"
|
|
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/semphr.h"
|
|
#include "freertos/queue.h"
|
|
#include "freertos/xtensa_api.h"
|
|
|
|
#include "unity.h"
|
|
|
|
#include "soc/uart_reg.h"
|
|
#include "soc/dport_reg.h"
|
|
#include "soc/io_mux_reg.h"
|
|
#include "soc/gpio_sig_map.h"
|
|
#include "soc/gpio_reg.h"
|
|
#include "soc/i2s_reg.h"
|
|
|
|
|
|
|
|
#define DPORT_I2S0_CLK_EN (BIT(4))
|
|
#define DPORT_I2S0_RST (BIT(4))
|
|
|
|
|
|
/*
|
|
This test tests the s32c1i instruction when the AHB bus is also used. To create some AHB traffic, we use the I2S interface
|
|
to copy bytes over from one memory location to another. DO NOT USE the i2s routines inhere, they've been trial-and-error'ed until
|
|
the point where they happened to do what I want.
|
|
*/
|
|
|
|
static void lcdIfaceInit()
|
|
{
|
|
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_I2S0_CLK_EN);
|
|
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_I2S0_RST);
|
|
|
|
//Init pins to i2s functions
|
|
SET_PERI_REG_MASK(GPIO_ENABLE_W1TS_REG, (1 << 11) | (1 << 3) | (1 << 0) | (1 << 2) | (1 << 5) | (1 << 16) | (1 << 17) | (1 << 18) | (1 << 19) | (1 << 20)); //ENABLE GPIO oe_enable
|
|
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO0_U, 0);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, 0);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO5_U, 0);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO16_U, 0);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO17_U, 0);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO18_U, 0);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO19_U, 0);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO20_U, 0);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CMD_U, 2); //11
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO26_U, 0); //RS
|
|
|
|
WRITE_PERI_REG(GPIO_FUNC0_OUT_SEL_CFG_REG, (148 << GPIO_FUNC0_OUT_SEL_S));
|
|
WRITE_PERI_REG(GPIO_FUNC2_OUT_SEL_CFG_REG, (149 << GPIO_FUNC0_OUT_SEL_S));
|
|
WRITE_PERI_REG(GPIO_FUNC5_OUT_SEL_CFG_REG, (150 << GPIO_FUNC0_OUT_SEL_S));
|
|
WRITE_PERI_REG(GPIO_FUNC16_OUT_SEL_CFG_REG, (151 << GPIO_FUNC0_OUT_SEL_S));
|
|
WRITE_PERI_REG(GPIO_FUNC17_OUT_SEL_CFG_REG, (152 << GPIO_FUNC0_OUT_SEL_S));
|
|
WRITE_PERI_REG(GPIO_FUNC18_OUT_SEL_CFG_REG, (153 << GPIO_FUNC0_OUT_SEL_S));
|
|
WRITE_PERI_REG(GPIO_FUNC19_OUT_SEL_CFG_REG, (154 << GPIO_FUNC0_OUT_SEL_S));
|
|
WRITE_PERI_REG(GPIO_FUNC20_OUT_SEL_CFG_REG, (155 << GPIO_FUNC0_OUT_SEL_S));
|
|
WRITE_PERI_REG(GPIO_FUNC26_OUT_SEL_CFG_REG, (156 << GPIO_FUNC0_OUT_SEL_S)); //RS
|
|
WRITE_PERI_REG(GPIO_FUNC11_OUT_SEL_CFG_REG, (I2S0O_WS_OUT_IDX << GPIO_FUNC0_OUT_SEL_S));
|
|
// WRITE_PERI_REG(GPIO_FUNC11_OUT_SEL_CFG, (I2S0O_BCK_OUT_IDX<<GPIO_GPIO_FUNC0_OUT_SEL_S));
|
|
|
|
//GPIO_SET_GPIO_FUNC11_OUT_INV_SEL(1); //old
|
|
WRITE_PERI_REG(GPIO_FUNC11_OUT_SEL_CFG_REG, READ_PERI_REG(GPIO_FUNC11_OUT_SEL_CFG_REG) | GPIO_FUNC11_OUT_INV_SEL);
|
|
|
|
//Reset I2S subsystem
|
|
CLEAR_PERI_REG_MASK(I2S_CONF_REG(0), I2S_RX_RESET | I2S_TX_RESET);
|
|
SET_PERI_REG_MASK(I2S_CONF_REG(0), I2S_RX_RESET | I2S_TX_RESET);
|
|
CLEAR_PERI_REG_MASK(I2S_CONF_REG(0), I2S_RX_RESET | I2S_TX_RESET);
|
|
|
|
WRITE_PERI_REG(I2S_CONF_REG(0), 0);//I2S_SIG_LOOPBACK);
|
|
WRITE_PERI_REG(I2S_CONF2_REG(0), 0);
|
|
|
|
WRITE_PERI_REG(I2S_SAMPLE_RATE_CONF_REG(0),
|
|
(16 << I2S_RX_BITS_MOD_S) |
|
|
(16 << I2S_TX_BITS_MOD_S) |
|
|
(1 << I2S_RX_BCK_DIV_NUM_S) |
|
|
(1 << I2S_TX_BCK_DIV_NUM_S));
|
|
WRITE_PERI_REG(I2S_CLKM_CONF_REG(0),
|
|
I2S_CLKA_ENA | I2S_CLK_EN |
|
|
(1 << I2S_CLKM_DIV_A_S) |
|
|
(1 << I2S_CLKM_DIV_B_S) |
|
|
(1 << I2S_CLKM_DIV_NUM_S));
|
|
WRITE_PERI_REG(I2S_FIFO_CONF_REG(0),
|
|
(32 << I2S_TX_DATA_NUM_S) | //Low watermark for IRQ
|
|
(32 << I2S_RX_DATA_NUM_S));
|
|
|
|
WRITE_PERI_REG(I2S_CONF1_REG(0), I2S_RX_PCM_BYPASS | I2S_TX_PCM_BYPASS);
|
|
|
|
WRITE_PERI_REG(I2S_CONF_CHAN_REG(0), (2 << I2S_TX_CHAN_MOD_S) | (2 << I2S_RX_CHAN_MOD_S));
|
|
|
|
//Invert WS to active-low
|
|
SET_PERI_REG_MASK(I2S_CONF_REG(0), I2S_TX_RIGHT_FIRST | I2S_RX_RIGHT_FIRST);
|
|
WRITE_PERI_REG(I2S_TIMING_REG(0), 0);
|
|
}
|
|
|
|
|
|
static volatile lldesc_t dmaDesc[2];
|
|
|
|
static void finishDma()
|
|
{
|
|
//No need to finish if no DMA transfer going on
|
|
if (!(READ_PERI_REG(I2S_FIFO_CONF_REG(0))&I2S_DSCR_EN)) {
|
|
return;
|
|
}
|
|
|
|
//Wait till fifo done
|
|
while (!(READ_PERI_REG(I2S_INT_RAW_REG(0))&I2S_TX_REMPTY_INT_RAW)) ;
|
|
//Wait for last bytes to leave i2s xmit thing
|
|
//ToDo: poll bit in next hw
|
|
// for (i=0; i<(1<<8); i++);
|
|
while (!(READ_PERI_REG(I2S_STATE_REG(0))&I2S_TX_IDLE));
|
|
|
|
//Reset I2S for next transfer
|
|
CLEAR_PERI_REG_MASK(I2S_CONF_REG(0), I2S_TX_START | I2S_RX_START);
|
|
CLEAR_PERI_REG_MASK(I2S_OUT_LINK_REG(0), I2S_OUTLINK_START | I2S_INLINK_START);
|
|
|
|
SET_PERI_REG_MASK(I2S_CONF_REG(0), I2S_TX_RESET | I2S_TX_FIFO_RESET | I2S_RX_RESET | I2S_RX_FIFO_RESET);
|
|
CLEAR_PERI_REG_MASK(I2S_CONF_REG(0), I2S_TX_RESET | I2S_TX_FIFO_RESET | I2S_RX_RESET | I2S_RX_FIFO_RESET);
|
|
|
|
// for (i=0; i<(1<<8); i++);
|
|
while ((READ_PERI_REG(I2S_STATE_REG(0))&I2S_TX_FIFO_RESET_BACK));
|
|
}
|
|
|
|
|
|
/*
|
|
This is a very, very, very hacked up LCD routine which ends up basically doing a memcpy from sbuf to rbuf.
|
|
*/
|
|
static void sendRecvBufDma(uint16_t *sbuf, uint16_t *rbuf, int len)
|
|
{
|
|
//Fill DMA descriptor
|
|
dmaDesc[0].length = len * 2;
|
|
dmaDesc[0].size = len * 2;
|
|
dmaDesc[0].owner = 1;
|
|
dmaDesc[0].sosf = 0;
|
|
dmaDesc[0].buf = (uint8_t *)sbuf;
|
|
dmaDesc[0].offset = 0; //unused in hw
|
|
dmaDesc[0].empty = 0;
|
|
dmaDesc[0].eof = 1;
|
|
dmaDesc[1].length = len * 2;
|
|
dmaDesc[1].size = len * 2;
|
|
dmaDesc[1].owner = 1;
|
|
dmaDesc[1].sosf = 0;
|
|
dmaDesc[1].buf = (uint8_t *)rbuf;
|
|
dmaDesc[1].offset = 0; //unused in hw
|
|
dmaDesc[1].empty = 0;
|
|
dmaDesc[1].eof = 1;
|
|
|
|
//Reset DMA
|
|
SET_PERI_REG_MASK(I2S_LC_CONF_REG(0), I2S_IN_RST | I2S_OUT_RST | I2S_AHBM_RST | I2S_AHBM_FIFO_RST);
|
|
CLEAR_PERI_REG_MASK(I2S_LC_CONF_REG(0), I2S_IN_RST | I2S_OUT_RST | I2S_AHBM_RST | I2S_AHBM_FIFO_RST);
|
|
|
|
//Reset I2S FIFO
|
|
SET_PERI_REG_MASK(I2S_CONF_REG(0), I2S_RX_RESET | I2S_TX_RESET | I2S_TX_FIFO_RESET | I2S_RX_FIFO_RESET);
|
|
CLEAR_PERI_REG_MASK(I2S_CONF_REG(0), I2S_RX_RESET | I2S_TX_RESET | I2S_TX_FIFO_RESET | I2S_RX_FIFO_RESET);
|
|
|
|
//Set desc addr
|
|
CLEAR_PERI_REG_MASK(I2S_OUT_LINK_REG(0), I2S_OUTLINK_ADDR);
|
|
SET_PERI_REG_MASK(I2S_OUT_LINK_REG(0), ((uint32_t)(&dmaDesc[0]))&I2S_OUTLINK_ADDR);
|
|
CLEAR_PERI_REG_MASK(I2S_IN_LINK_REG(0), I2S_INLINK_ADDR);
|
|
SET_PERI_REG_MASK(I2S_IN_LINK_REG(0), ((uint32_t)(&dmaDesc[1]))&I2S_INLINK_ADDR);
|
|
|
|
SET_PERI_REG_MASK(I2S_FIFO_CONF_REG(0), I2S_DSCR_EN); //Enable DMA mode
|
|
|
|
WRITE_PERI_REG(I2S_RXEOF_NUM_REG(0), len);
|
|
|
|
//Enable and configure DMA
|
|
WRITE_PERI_REG(I2S_LC_CONF_REG(0), I2S_OUT_DATA_BURST_EN |
|
|
I2S_OUT_EOF_MODE | I2S_OUTDSCR_BURST_EN | I2S_OUT_DATA_BURST_EN |
|
|
I2S_INDSCR_BURST_EN | I2S_MEM_TRANS_EN);
|
|
|
|
//Start transmission
|
|
SET_PERI_REG_MASK(I2S_OUT_LINK_REG(0), I2S_OUTLINK_START);
|
|
SET_PERI_REG_MASK(I2S_IN_LINK_REG(0), I2S_INLINK_START);
|
|
|
|
SET_PERI_REG_MASK(I2S_CONF_REG(0), I2S_TX_START | I2S_RX_START);
|
|
//Clear int flags
|
|
WRITE_PERI_REG(I2S_INT_CLR_REG(0), 0xFFFFFFFF);
|
|
}
|
|
|
|
|
|
#define DMALEN (2048-2)
|
|
|
|
static void tskLcd(void *pvParameters)
|
|
{
|
|
uint16_t *sbuf = malloc(DMALEN * 2);
|
|
uint16_t *rbuf = malloc(DMALEN * 2);
|
|
uint16_t xorval = 0;
|
|
int x;
|
|
lcdIfaceInit();
|
|
// lcdFlush();
|
|
while (1) {
|
|
for (x = 0; x < DMALEN; x++) {
|
|
sbuf[x] = x ^ xorval;
|
|
}
|
|
for (x = 0; x < DMALEN; x++) {
|
|
rbuf[x] = 0; //clear rbuf
|
|
}
|
|
sendRecvBufDma(sbuf, rbuf, DMALEN);
|
|
vTaskDelay(20 / portTICK_PERIOD_MS);
|
|
finishDma();
|
|
for (x = 0; x < DMALEN; x++) if (rbuf[x] != (x ^ xorval)) {
|
|
printf("Rxbuf err! pos %d val %x xor %x", x, (int)rbuf[x], (int)xorval);
|
|
}
|
|
printf(".");
|
|
fflush(stdout);
|
|
xorval++;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
void test_s32c1i_lock(volatile int *lockvar, int lockval, int unlockval, volatile int *ctr);
|
|
|
|
static volatile int ctr = 0, state = 0;
|
|
static volatile int lock = 0;
|
|
|
|
static void tskOne(void *pvParameters)
|
|
{
|
|
int x;
|
|
int err = 0, run = 0;
|
|
while (1) {
|
|
ctr = 0; lock = 0;
|
|
state = 1;
|
|
for (x = 0; x < 16 * 1024; x++) {
|
|
test_s32c1i_lock(&lock, 1, 0, &ctr);
|
|
}
|
|
vTaskDelay(60 / portTICK_PERIOD_MS);
|
|
state = 2;
|
|
if (ctr != 16 * 1024 * 2) {
|
|
printf("Lock malfunction detected! Ctr=0x%x instead of %x\n", ctr, 16 * 1024 * 2);
|
|
err++;
|
|
}
|
|
run++;
|
|
printf("Run %d err %d\n", run, err);
|
|
vTaskDelay(20 / portTICK_PERIOD_MS);
|
|
}
|
|
}
|
|
|
|
#define FB2ADDR 0x40098000
|
|
|
|
static void tskTwo(void *pvParameters)
|
|
{
|
|
int x;
|
|
int *p = (int *)FB2ADDR;
|
|
int *s = (int *)test_s32c1i_lock;
|
|
void (*test_s32c1i_lock2)(volatile int * lockvar, int lockval, int unlockval, volatile int * ctr) = (void *)FB2ADDR;
|
|
volatile int w;
|
|
int delay;
|
|
for (x = 0; x < 100; x++) {
|
|
*p++ = *s++; //copy routine to different pool
|
|
}
|
|
|
|
while (1) {
|
|
while (state != 1) ;
|
|
for (x = 0; x < 16 * 1024; x++) {
|
|
test_s32c1i_lock2(&lock, 2, 0, &ctr);
|
|
//Some random delay to increase chance of weirdness
|
|
if ((x & 0x1f) == 0) {
|
|
delay = rand() & 0x1f;
|
|
for (w = 0; w < delay; w++);
|
|
}
|
|
}
|
|
while (state != 2);
|
|
}
|
|
}
|
|
|
|
|
|
TEST_CASE("S32C1I vs AHB test (needs I2S)", "[hw][ignore]")
|
|
{
|
|
int i;
|
|
TaskHandle_t th[3];
|
|
state = 0;
|
|
|
|
printf("Creating tasks\n");
|
|
xTaskCreatePinnedToCore(tskTwo , "tsktwo" , 2048, NULL, 3, &th[1], 1);
|
|
xTaskCreatePinnedToCore(tskOne , "tskone" , 2048, NULL, 3, &th[0], 0);
|
|
xTaskCreatePinnedToCore(tskLcd , "tsklcd" , 2048, NULL, 3, &th[2], 0);
|
|
|
|
// Let stuff run for 20s
|
|
while (1) {
|
|
vTaskDelay(20000 / portTICK_PERIOD_MS);
|
|
}
|
|
|
|
//Shut down all the tasks
|
|
for (i = 0; i < 3; i++) {
|
|
vTaskDelete(th[i]);
|
|
}
|
|
}
|
|
|