100 lines
4.4 KiB
Plaintext
100 lines
4.4 KiB
Plaintext
# Common (non-chip-specific) SPIRAM options
|
|
#
|
|
# sourced into the "SPIRAM config" submenu for ESP32 or ESP32S2
|
|
|
|
# invisible option selected by ESP32_SPIRAM_SUPPORT || ESP32S2_SPIRAM_SUPPORT
|
|
config SPIRAM
|
|
bool
|
|
|
|
config SPIRAM_BOOT_INIT
|
|
bool "Initialize SPI RAM during startup"
|
|
default "y"
|
|
help
|
|
If this is enabled, the SPI RAM will be enabled during initial boot. Unless you
|
|
have specific requirements, you'll want to leave this enabled so memory allocated
|
|
during boot-up can also be placed in SPI RAM.
|
|
|
|
config SPIRAM_IGNORE_NOTFOUND
|
|
bool "Ignore PSRAM when not found"
|
|
default "n"
|
|
depends on SPIRAM_BOOT_INIT && !SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY
|
|
help
|
|
Normally, if psram initialization is enabled during compile time but not found at runtime, it
|
|
is seen as an error making the CPU panic. If this is enabled, booting will complete
|
|
but no PSRAM will be available.
|
|
|
|
choice SPIRAM_USE
|
|
prompt "SPI RAM access method"
|
|
default SPIRAM_USE_MALLOC
|
|
help
|
|
The SPI RAM can be accessed in multiple methods: by just having it available as an unmanaged
|
|
memory region in the CPU's memory map, by integrating it in the heap as 'special' memory
|
|
needing heap_caps_malloc to allocate, or by fully integrating it making malloc() also able to
|
|
return SPI RAM pointers.
|
|
|
|
config SPIRAM_USE_MEMMAP
|
|
bool "Integrate RAM into memory map"
|
|
config SPIRAM_USE_CAPS_ALLOC
|
|
bool "Make RAM allocatable using heap_caps_malloc(..., MALLOC_CAP_SPIRAM)"
|
|
config SPIRAM_USE_MALLOC
|
|
bool "Make RAM allocatable using malloc() as well"
|
|
select FREERTOS_SUPPORT_STATIC_ALLOCATION
|
|
endchoice
|
|
|
|
config SPIRAM_MEMTEST
|
|
bool "Run memory test on SPI RAM initialization"
|
|
default "y"
|
|
depends on SPIRAM_BOOT_INIT
|
|
help
|
|
Runs a rudimentary memory test on initialization. Aborts when memory test fails. Disable this for
|
|
slightly faster startup.
|
|
|
|
config SPIRAM_MALLOC_ALWAYSINTERNAL
|
|
int "Maximum malloc() size, in bytes, to always put in internal memory"
|
|
depends on SPIRAM_USE_MALLOC
|
|
default 16384
|
|
range 0 131072
|
|
help
|
|
If malloc() is capable of also allocating SPI-connected ram, its allocation strategy will prefer to
|
|
allocate chunks less than this size in internal memory, while allocations larger than this will be
|
|
done from external RAM. If allocation from the preferred region fails, an attempt is made to allocate
|
|
from the non-preferred region instead, so malloc() will not suddenly fail when either internal or
|
|
external memory is full.
|
|
|
|
config SPIRAM_TRY_ALLOCATE_WIFI_LWIP
|
|
bool "Try to allocate memories of WiFi and LWIP in SPIRAM firstly. If failed, allocate internal memory"
|
|
depends on SPIRAM_USE_CAPS_ALLOC || SPIRAM_USE_MALLOC
|
|
default "n"
|
|
help
|
|
Try to allocate memories of WiFi and LWIP in SPIRAM firstly. If failed, try to allocate internal
|
|
memory then.
|
|
|
|
config SPIRAM_MALLOC_RESERVE_INTERNAL
|
|
int "Reserve this amount of bytes for data that specifically needs to be in DMA or internal memory"
|
|
depends on SPIRAM_USE_MALLOC
|
|
default 32768
|
|
range 0 262144
|
|
help
|
|
Because the external/internal RAM allocation strategy is not always perfect, it sometimes may happen
|
|
that the internal memory is entirely filled up. This causes allocations that are specifically done in
|
|
internal memory, for example the stack for new tasks or memory to service DMA or have memory that's
|
|
also available when SPI cache is down, to fail. This option reserves a pool specifically for requests
|
|
like that; the memory in this pool is not given out when a normal malloc() is called.
|
|
|
|
Set this to 0 to disable this feature.
|
|
|
|
Note that because FreeRTOS stacks are forced to internal memory, they will also use this memory pool;
|
|
be sure to keep this in mind when adjusting this value.
|
|
|
|
Note also that the DMA reserved pool may not be one single contiguous memory region, depending on the
|
|
configured size and the static memory usage of the app.
|
|
|
|
config SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY
|
|
bool "Allow .bss segment placed in external memory"
|
|
default n
|
|
depends on SPIRAM
|
|
help
|
|
If enabled the option,and add EXT_RAM_ATTR defined your variable,then your variable will be placed in
|
|
PSRAM instead of internal memory, and placed most of variables of lwip,net802.11,pp,bluedroid library
|
|
to external memory defaultly.
|