As of now, when Bluetooth debugs are enabled, all the messages are mapped to BT_PRINTF which is mapped to ESP_LOGE. Hence, make monitor shows all logs in red color which might lead to missing the actual errors This patch maps the Bluetooth messages to appropriate ESP_LOG* messages and improves readability. Also, make the BT trace level be configurable in menuconfig, so that each layer of bt trace can be enabled/disabled. Finally, add debug log control for BTC, OSI, BLUFI and clear up Bluetooth debug logs. So, with this the method of enabling Bluetooth logs is as follows: 1. make menuconfig -> Component config -> Bluetooth -> Bluedroid Enable -> BT DEBUG LOG LEVEL -> set trace level for every layer of BT Signed-off-by: Hrishikesh Dhayagude <hrishi@espressif.com>
990 lines
37 KiB
C
990 lines
37 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright (C) 1999-2012 Broadcom Corporation
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at:
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
******************************************************************************/
|
|
|
|
/******************************************************************************
|
|
*
|
|
* This file contains the main L2CAP entry points
|
|
*
|
|
******************************************************************************/
|
|
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
//#include <stdio.h>
|
|
|
|
#include "device/controller.h"
|
|
//#include "btcore/include/counter.h"
|
|
#include "common/bt_target.h"
|
|
#include "btm_int.h"
|
|
#include "stack/btu.h"
|
|
#include "stack/hcimsgs.h"
|
|
#include "stack/l2c_api.h"
|
|
#include "l2c_int.h"
|
|
#include "stack/l2cdefs.h"
|
|
//#include "osi/include/log.h"
|
|
|
|
/********************************************************************************/
|
|
/* L O C A L F U N C T I O N P R O T O T Y P E S */
|
|
/********************************************************************************/
|
|
#if (CLASSIC_BT_INCLUDED == TRUE)
|
|
static void process_l2cap_cmd (tL2C_LCB *p_lcb, UINT8 *p, UINT16 pkt_len);
|
|
#endif ///CLASSIC_BT_INCLUDED == TRUE
|
|
/********************************************************************************/
|
|
/* G L O B A L L 2 C A P D A T A */
|
|
/********************************************************************************/
|
|
#if L2C_DYNAMIC_MEMORY == FALSE
|
|
tL2C_CB l2cb;
|
|
#else
|
|
tL2C_CB *l2c_cb_ptr;
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
**
|
|
** Function l2c_bcst_msg
|
|
**
|
|
** Description
|
|
**
|
|
** Returns void
|
|
**
|
|
*******************************************************************************/
|
|
void l2c_bcst_msg( BT_HDR *p_buf, UINT16 psm )
|
|
{
|
|
UINT8 *p;
|
|
|
|
/* Ensure we have enough space in the buffer for the L2CAP and HCI headers */
|
|
if (p_buf->offset < L2CAP_BCST_MIN_OFFSET) {
|
|
L2CAP_TRACE_ERROR ("L2CAP - cannot send buffer, offset: %d", p_buf->offset);
|
|
osi_free (p_buf);
|
|
return;
|
|
}
|
|
|
|
/* Step back some bytes to add the headers */
|
|
p_buf->offset -= (HCI_DATA_PREAMBLE_SIZE + L2CAP_PKT_OVERHEAD + L2CAP_BCST_OVERHEAD);
|
|
p_buf->len += L2CAP_PKT_OVERHEAD + L2CAP_BCST_OVERHEAD;
|
|
|
|
/* Set the pointer to the beginning of the data */
|
|
p = (UINT8 *)(p_buf + 1) + p_buf->offset;
|
|
|
|
/* First, the HCI transport header */
|
|
UINT16_TO_STREAM (p, 0x0050 | (L2CAP_PKT_START << 12) | (2 << 14));
|
|
|
|
uint16_t acl_data_size = controller_get_interface()->get_acl_data_size_classic();
|
|
/* The HCI transport will segment the buffers. */
|
|
if (p_buf->len > acl_data_size) {
|
|
UINT16_TO_STREAM (p, acl_data_size);
|
|
} else {
|
|
UINT16_TO_STREAM (p, p_buf->len);
|
|
}
|
|
|
|
/* Now the L2CAP header */
|
|
UINT16_TO_STREAM (p, p_buf->len - L2CAP_PKT_OVERHEAD);
|
|
UINT16_TO_STREAM (p, L2CAP_CONNECTIONLESS_CID);
|
|
UINT16_TO_STREAM (p, psm);
|
|
|
|
p_buf->len += HCI_DATA_PREAMBLE_SIZE;
|
|
|
|
if (p_buf->len <= controller_get_interface()->get_acl_packet_size_classic()) {
|
|
//counter_add("l2cap.ch2.tx.bytes", p_buf->len);
|
|
//counter_add("l2cap.ch2.tx.pkts", 1);
|
|
|
|
bte_main_hci_send(p_buf, BT_EVT_TO_LM_HCI_ACL);
|
|
}
|
|
}
|
|
|
|
|
|
/*******************************************************************************
|
|
**
|
|
** Function l2c_rcv_acl_data
|
|
**
|
|
** Description This function is called from the HCI Interface when an ACL
|
|
** data packet is received.
|
|
**
|
|
** Returns void
|
|
**
|
|
*******************************************************************************/
|
|
void l2c_rcv_acl_data (BT_HDR *p_msg)
|
|
{
|
|
UINT8 *p = (UINT8 *)(p_msg + 1) + p_msg->offset;
|
|
UINT16 handle, hci_len;
|
|
UINT8 pkt_type;
|
|
tL2C_LCB *p_lcb;
|
|
tL2C_CCB *p_ccb = NULL;
|
|
UINT16 l2cap_len, rcv_cid, psm;
|
|
UINT16 credit;
|
|
|
|
/* Extract the handle */
|
|
STREAM_TO_UINT16 (handle, p);
|
|
pkt_type = HCID_GET_EVENT (handle);
|
|
handle = HCID_GET_HANDLE (handle);
|
|
|
|
/* Since the HCI Transport is putting segmented packets back together, we */
|
|
/* should never get a valid packet with the type set to "continuation" */
|
|
if (pkt_type != L2CAP_PKT_CONTINUE) {
|
|
/* Find the LCB based on the handle */
|
|
if ((p_lcb = l2cu_find_lcb_by_handle (handle)) == NULL) {
|
|
UINT8 cmd_code;
|
|
|
|
/* There is a slight possibility (specifically with USB) that we get an */
|
|
/* L2CAP connection request before we get the HCI connection complete. */
|
|
/* So for these types of messages, hold them for up to 2 seconds. */
|
|
STREAM_TO_UINT16 (hci_len, p);
|
|
STREAM_TO_UINT16 (l2cap_len, p);
|
|
STREAM_TO_UINT16 (rcv_cid, p);
|
|
STREAM_TO_UINT8 (cmd_code, p);
|
|
|
|
if ((p_msg->layer_specific == 0) && (rcv_cid == L2CAP_SIGNALLING_CID)
|
|
&& (cmd_code == L2CAP_CMD_INFO_REQ || cmd_code == L2CAP_CMD_CONN_REQ)) {
|
|
L2CAP_TRACE_WARNING ("L2CAP - holding ACL for unknown handle:%d ls:%d"
|
|
" cid:%d opcode:%d cur count:%d", handle, p_msg->layer_specific,
|
|
rcv_cid, cmd_code, list_length(l2cb.rcv_pending_q));
|
|
p_msg->layer_specific = 2;
|
|
list_append(l2cb.rcv_pending_q, p_msg);
|
|
|
|
if (list_length(l2cb.rcv_pending_q) == 1) {
|
|
btu_start_timer (&l2cb.rcv_hold_tle, BTU_TTYPE_L2CAP_HOLD, BT_1SEC_TIMEOUT);
|
|
}
|
|
|
|
return;
|
|
} else {
|
|
L2CAP_TRACE_ERROR ("L2CAP - rcvd ACL for unknown handle:%d ls:%d cid:%d"
|
|
" opcode:%d cur count:%d", handle, p_msg->layer_specific, rcv_cid,
|
|
cmd_code, list_length(l2cb.rcv_pending_q));
|
|
}
|
|
osi_free (p_msg);
|
|
return;
|
|
}
|
|
} else {
|
|
L2CAP_TRACE_WARNING ("L2CAP - expected pkt start or complete, got: %d", pkt_type);
|
|
osi_free (p_msg);
|
|
return;
|
|
}
|
|
|
|
/* Extract the length and update the buffer header */
|
|
STREAM_TO_UINT16 (hci_len, p);
|
|
p_msg->offset += 4;
|
|
|
|
/* Extract the length and CID */
|
|
STREAM_TO_UINT16 (l2cap_len, p);
|
|
STREAM_TO_UINT16 (rcv_cid, p);
|
|
|
|
#if BLE_INCLUDED == TRUE
|
|
/* for BLE channel, always notify connection when ACL data received on the link */
|
|
if (p_lcb && p_lcb->transport == BT_TRANSPORT_LE && p_lcb->link_state != LST_DISCONNECTING)
|
|
/* only process fixed channel data as channel open indication when link is not in disconnecting mode */
|
|
{
|
|
l2cble_notify_le_connection(p_lcb->remote_bd_addr);
|
|
}
|
|
#endif
|
|
L2CAP_TRACE_DEBUG ("L2CAP - rcv_cid CID: 0x%04x\n", rcv_cid);
|
|
/* Find the CCB for this CID */
|
|
if (rcv_cid >= L2CAP_BASE_APPL_CID) {
|
|
if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, rcv_cid)) == NULL) {
|
|
L2CAP_TRACE_WARNING ("L2CAP - unknown CID: 0x%04x", rcv_cid);
|
|
osi_free (p_msg);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (hci_len >= L2CAP_PKT_OVERHEAD) { /* Must receive at least the L2CAP length and CID.*/
|
|
p_msg->len = hci_len - L2CAP_PKT_OVERHEAD;
|
|
p_msg->offset += L2CAP_PKT_OVERHEAD;
|
|
} else {
|
|
L2CAP_TRACE_WARNING ("L2CAP - got incorrect hci header" );
|
|
osi_free (p_msg);
|
|
return;
|
|
}
|
|
|
|
if (l2cap_len != p_msg->len) {
|
|
L2CAP_TRACE_WARNING ("L2CAP - bad length in pkt. Exp: %d Act: %d",
|
|
l2cap_len, p_msg->len);
|
|
|
|
osi_free (p_msg);
|
|
return;
|
|
}
|
|
|
|
/* Send the data through the channel state machine */
|
|
if (rcv_cid == L2CAP_SIGNALLING_CID) {
|
|
//counter_add("l2cap.sig.rx.bytes", l2cap_len);
|
|
//counter_add("l2cap.sig.rx.pkts", 1);
|
|
#if (CLASSIC_BT_INCLUDED == TRUE)
|
|
process_l2cap_cmd (p_lcb, p, l2cap_len);
|
|
#endif ///CLASSIC_BT_INCLUDED == TRUE
|
|
osi_free (p_msg);
|
|
} else if (rcv_cid == L2CAP_CONNECTIONLESS_CID) {
|
|
//counter_add("l2cap.ch2.rx.bytes", l2cap_len);
|
|
//counter_add("l2cap.ch2.rx.pkts", 1);
|
|
/* process_connectionless_data (p_lcb); */
|
|
STREAM_TO_UINT16 (psm, p);
|
|
L2CAP_TRACE_DEBUG( "GOT CONNECTIONLESS DATA PSM:%d", psm ) ;
|
|
|
|
#if (L2CAP_UCD_INCLUDED == TRUE)
|
|
/* if it is not broadcast, check UCD registration */
|
|
if ( l2c_ucd_check_rx_pkts( p_lcb, p_msg ) ) {
|
|
/* nothing to do */
|
|
} else
|
|
#endif
|
|
osi_free (p_msg);
|
|
}
|
|
#if (BLE_INCLUDED == TRUE)
|
|
else if (rcv_cid == L2CAP_BLE_SIGNALLING_CID) {
|
|
//counter_add("l2cap.ble.rx.bytes", l2cap_len);
|
|
//counter_add("l2cap.ble.rx.pkts", 1);
|
|
l2cble_process_sig_cmd (p_lcb, p, l2cap_len);
|
|
osi_free (p_msg);
|
|
}
|
|
#endif
|
|
#if (L2CAP_NUM_FIXED_CHNLS > 0)
|
|
else if ((rcv_cid >= L2CAP_FIRST_FIXED_CHNL) && (rcv_cid <= L2CAP_LAST_FIXED_CHNL) &&
|
|
(l2cb.fixed_reg[rcv_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb != NULL) ) {
|
|
//counter_add("l2cap.fix.rx.bytes", l2cap_len);
|
|
//counter_add("l2cap.fix.rx.pkts", 1);
|
|
/* If no CCB for this channel, allocate one */
|
|
if (p_lcb &&
|
|
/* only process fixed channel data when link is open or wait for data indication */
|
|
(p_lcb->link_state != LST_DISCONNECTING) &&
|
|
l2cu_initialize_fixed_ccb (p_lcb, rcv_cid, &l2cb.fixed_reg[rcv_cid - L2CAP_FIRST_FIXED_CHNL].fixed_chnl_opts)) {
|
|
p_ccb = p_lcb->p_fixed_ccbs[rcv_cid - L2CAP_FIRST_FIXED_CHNL];
|
|
|
|
if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_BASIC_MODE) {
|
|
#if (CLASSIC_BT_INCLUDED == TRUE)
|
|
l2c_fcr_proc_pdu (p_ccb, p_msg);
|
|
#endif ///CLASSIC_BT_INCLUDED == TRUE
|
|
} else
|
|
(*l2cb.fixed_reg[rcv_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb)
|
|
(rcv_cid, p_lcb->remote_bd_addr, p_msg);
|
|
} else {
|
|
osi_free (p_msg);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
else {
|
|
//counter_add("l2cap.dyn.rx.bytes", l2cap_len);
|
|
//counter_add("l2cap.dyn.rx.pkts", 1);
|
|
if (p_ccb == NULL) {
|
|
osi_free (p_msg);
|
|
} else {
|
|
if (p_lcb->transport == BT_TRANSPORT_LE) {
|
|
// Got a pkt, valid send out credits to the peer device
|
|
credit = L2CAP_LE_DEFAULT_CREDIT;
|
|
L2CAP_TRACE_DEBUG("%s Credits received %d",__func__, credit);
|
|
if((p_ccb->peer_conn_cfg.credits + credit) > L2CAP_LE_MAX_CREDIT) {
|
|
/* we have received credits more than max coc credits,
|
|
* so disconnecting the Le Coc Channel
|
|
*/
|
|
l2cble_send_peer_disc_req (p_ccb);
|
|
} else {
|
|
p_ccb->peer_conn_cfg.credits += credit;
|
|
l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, NULL);
|
|
}
|
|
}
|
|
/* Basic mode packets go straight to the state machine */
|
|
if (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_BASIC_MODE) {
|
|
#if (CLASSIC_BT_INCLUDED == TRUE)
|
|
l2c_csm_execute (p_ccb, L2CEVT_L2CAP_DATA, p_msg);
|
|
#endif ///CLASSIC_BT_INCLUDED == TRUE
|
|
} else {
|
|
/* eRTM or streaming mode, so we need to validate states first */
|
|
if ((p_ccb->chnl_state == CST_OPEN) || (p_ccb->chnl_state == CST_CONFIG)) {
|
|
#if (CLASSIC_BT_INCLUDED == TRUE)
|
|
l2c_fcr_proc_pdu (p_ccb, p_msg);
|
|
#endif ///CLASSIC_BT_INCLUDED == TRUE
|
|
} else {
|
|
osi_free (p_msg);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*******************************************************************************
|
|
**
|
|
** Function process_l2cap_cmd
|
|
**
|
|
** Description This function is called when a packet is received on the
|
|
** L2CAP signalling CID
|
|
**
|
|
** Returns void
|
|
**
|
|
*******************************************************************************/
|
|
#if (CLASSIC_BT_INCLUDED == TRUE)
|
|
static void process_l2cap_cmd (tL2C_LCB *p_lcb, UINT8 *p, UINT16 pkt_len)
|
|
{
|
|
UINT8 *p_pkt_end, *p_next_cmd, *p_cfg_end, *p_cfg_start;
|
|
UINT8 cmd_code, cfg_code, cfg_len, id;
|
|
tL2C_CONN_INFO con_info;
|
|
tL2CAP_CFG_INFO cfg_info;
|
|
UINT16 rej_reason, rej_mtu, lcid, rcid, info_type;
|
|
tL2C_CCB *p_ccb;
|
|
tL2C_RCB *p_rcb;
|
|
BOOLEAN cfg_rej, pkt_size_rej = FALSE;
|
|
UINT16 cfg_rej_len, cmd_len;
|
|
UINT16 result;
|
|
tL2C_CONN_INFO ci;
|
|
|
|
#if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE)
|
|
/* if l2cap command received in CID 1 on top of an LE link, ignore this command */
|
|
if (p_lcb->transport == BT_TRANSPORT_LE) {
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* Reject the packet if it exceeds the default Signalling Channel MTU */
|
|
if (pkt_len > L2CAP_DEFAULT_MTU) {
|
|
/* Core Spec requires a single response to the first command found in a multi-command
|
|
** L2cap packet. If only responses in the packet, then it will be ignored.
|
|
** Here we simply mark the bad packet and decide which cmd ID to reject later
|
|
*/
|
|
pkt_size_rej = TRUE;
|
|
L2CAP_TRACE_ERROR ("L2CAP SIG MTU Pkt Len Exceeded (672) -> pkt_len: %d", pkt_len);
|
|
}
|
|
|
|
p_next_cmd = p;
|
|
p_pkt_end = p + pkt_len;
|
|
|
|
memset (&cfg_info, 0, sizeof(cfg_info));
|
|
|
|
/* An L2CAP packet may contain multiple commands */
|
|
while (TRUE) {
|
|
/* Smallest command is 4 bytes */
|
|
if ((p = p_next_cmd) > (p_pkt_end - 4)) {
|
|
break;
|
|
}
|
|
|
|
STREAM_TO_UINT8 (cmd_code, p);
|
|
STREAM_TO_UINT8 (id, p);
|
|
STREAM_TO_UINT16 (cmd_len, p);
|
|
|
|
/* Check command length does not exceed packet length */
|
|
if ((p_next_cmd = p + cmd_len) > p_pkt_end) {
|
|
L2CAP_TRACE_WARNING ("Command len bad pkt_len: %d cmd_len: %d code: %d",
|
|
pkt_len, cmd_len, cmd_code);
|
|
break;
|
|
}
|
|
|
|
L2CAP_TRACE_DEBUG ("cmd_code: %d, id:%d, cmd_len:%d", cmd_code, id, cmd_len);
|
|
|
|
/* Bad L2CAP packet length, look or cmd to reject */
|
|
if (pkt_size_rej) {
|
|
/* If command found rejected it and we're done, otherwise keep looking */
|
|
if (l2c_is_cmd_rejected(cmd_code, id, p_lcb)) {
|
|
return;
|
|
} else {
|
|
continue; /* Look for next cmd/response in current packet */
|
|
}
|
|
}
|
|
|
|
switch (cmd_code) {
|
|
case L2CAP_CMD_REJECT:
|
|
STREAM_TO_UINT16 (rej_reason, p);
|
|
if (rej_reason == L2CAP_CMD_REJ_MTU_EXCEEDED) {
|
|
STREAM_TO_UINT16 (rej_mtu, p);
|
|
/* What to do with the MTU reject ? We have negotiated an MTU. For now */
|
|
/* we will ignore it and let a higher protocol timeout take care of it */
|
|
|
|
L2CAP_TRACE_WARNING ("L2CAP - MTU rej Handle: %d MTU: %d", p_lcb->handle, rej_mtu);
|
|
}
|
|
if (rej_reason == L2CAP_CMD_REJ_INVALID_CID) {
|
|
STREAM_TO_UINT16 (rcid, p);
|
|
STREAM_TO_UINT16 (lcid, p);
|
|
|
|
L2CAP_TRACE_WARNING ("L2CAP - rej with CID invalid, LCID: 0x%04x RCID: 0x%04x", lcid, rcid);
|
|
|
|
/* Remote CID invalid. Treat as a disconnect */
|
|
if (((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) != NULL)
|
|
&& (p_ccb->remote_cid == rcid)) {
|
|
/* Fake link disconnect - no reply is generated */
|
|
l2c_csm_execute (p_ccb, L2CEVT_LP_DISCONNECT_IND, NULL);
|
|
}
|
|
}
|
|
|
|
/* SonyEricsson Info request Bug workaround (Continue connection) */
|
|
else if (rej_reason == L2CAP_CMD_REJ_NOT_UNDERSTOOD && p_lcb->w4_info_rsp) {
|
|
btu_stop_timer (&p_lcb->info_timer_entry);
|
|
|
|
p_lcb->w4_info_rsp = FALSE;
|
|
ci.status = HCI_SUCCESS;
|
|
memcpy (ci.bd_addr, p_lcb->remote_bd_addr, sizeof(BD_ADDR));
|
|
|
|
/* For all channels, send the event through their FSMs */
|
|
for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb) {
|
|
l2c_csm_execute (p_ccb, L2CEVT_L2CAP_INFO_RSP, &ci);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case L2CAP_CMD_CONN_REQ:
|
|
STREAM_TO_UINT16 (con_info.psm, p);
|
|
STREAM_TO_UINT16 (rcid, p);
|
|
if ((p_rcb = l2cu_find_rcb_by_psm (con_info.psm)) == NULL) {
|
|
L2CAP_TRACE_WARNING ("L2CAP - rcvd conn req for unknown PSM: %d", con_info.psm);
|
|
l2cu_reject_connection (p_lcb, rcid, id, L2CAP_CONN_NO_PSM);
|
|
break;
|
|
} else {
|
|
if (!p_rcb->api.pL2CA_ConnectInd_Cb) {
|
|
L2CAP_TRACE_WARNING ("L2CAP - rcvd conn req for outgoing-only connection PSM: %d", con_info.psm);
|
|
l2cu_reject_connection (p_lcb, rcid, id, L2CAP_CONN_NO_PSM);
|
|
break;
|
|
}
|
|
}
|
|
if ((p_ccb = l2cu_allocate_ccb (p_lcb, 0)) == NULL) {
|
|
L2CAP_TRACE_ERROR ("L2CAP - unable to allocate CCB");
|
|
l2cu_reject_connection (p_lcb, rcid, id, L2CAP_CONN_NO_RESOURCES);
|
|
break;
|
|
}
|
|
p_ccb->remote_id = id;
|
|
p_ccb->p_rcb = p_rcb;
|
|
p_ccb->remote_cid = rcid;
|
|
|
|
l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_REQ, &con_info);
|
|
break;
|
|
|
|
case L2CAP_CMD_CONN_RSP:
|
|
STREAM_TO_UINT16 (con_info.remote_cid, p);
|
|
STREAM_TO_UINT16 (lcid, p);
|
|
STREAM_TO_UINT16 (con_info.l2cap_result, p);
|
|
STREAM_TO_UINT16 (con_info.l2cap_status, p);
|
|
|
|
if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) == NULL) {
|
|
L2CAP_TRACE_WARNING ("L2CAP - no CCB for conn rsp, LCID: %d RCID: %d",
|
|
lcid, con_info.remote_cid);
|
|
break;
|
|
}
|
|
if (p_ccb->local_id != id) {
|
|
L2CAP_TRACE_WARNING ("L2CAP - con rsp - bad ID. Exp: %d Got: %d",
|
|
p_ccb->local_id, id);
|
|
break;
|
|
}
|
|
|
|
if (con_info.l2cap_result == L2CAP_CONN_OK) {
|
|
l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_RSP, &con_info);
|
|
} else if (con_info.l2cap_result == L2CAP_CONN_PENDING) {
|
|
l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_RSP_PND, &con_info);
|
|
} else {
|
|
l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_RSP_NEG, &con_info);
|
|
}
|
|
|
|
break;
|
|
|
|
case L2CAP_CMD_CONFIG_REQ:
|
|
p_cfg_end = p + cmd_len;
|
|
cfg_rej = FALSE;
|
|
cfg_rej_len = 0;
|
|
|
|
STREAM_TO_UINT16 (lcid, p);
|
|
STREAM_TO_UINT16 (cfg_info.flags, p);
|
|
|
|
p_cfg_start = p;
|
|
|
|
cfg_info.flush_to_present = cfg_info.mtu_present = cfg_info.qos_present =
|
|
cfg_info.fcr_present = cfg_info.fcs_present = FALSE;
|
|
|
|
while (p < p_cfg_end) {
|
|
STREAM_TO_UINT8 (cfg_code, p);
|
|
STREAM_TO_UINT8 (cfg_len, p);
|
|
|
|
switch (cfg_code & 0x7F) {
|
|
case L2CAP_CFG_TYPE_MTU:
|
|
cfg_info.mtu_present = TRUE;
|
|
STREAM_TO_UINT16 (cfg_info.mtu, p);
|
|
break;
|
|
|
|
case L2CAP_CFG_TYPE_FLUSH_TOUT:
|
|
cfg_info.flush_to_present = TRUE;
|
|
STREAM_TO_UINT16 (cfg_info.flush_to, p);
|
|
break;
|
|
|
|
case L2CAP_CFG_TYPE_QOS:
|
|
cfg_info.qos_present = TRUE;
|
|
STREAM_TO_UINT8 (cfg_info.qos.qos_flags, p);
|
|
STREAM_TO_UINT8 (cfg_info.qos.service_type, p);
|
|
STREAM_TO_UINT32 (cfg_info.qos.token_rate, p);
|
|
STREAM_TO_UINT32 (cfg_info.qos.token_bucket_size, p);
|
|
STREAM_TO_UINT32 (cfg_info.qos.peak_bandwidth, p);
|
|
STREAM_TO_UINT32 (cfg_info.qos.latency, p);
|
|
STREAM_TO_UINT32 (cfg_info.qos.delay_variation, p);
|
|
break;
|
|
|
|
case L2CAP_CFG_TYPE_FCR:
|
|
cfg_info.fcr_present = TRUE;
|
|
STREAM_TO_UINT8 (cfg_info.fcr.mode, p);
|
|
STREAM_TO_UINT8 (cfg_info.fcr.tx_win_sz, p);
|
|
STREAM_TO_UINT8 (cfg_info.fcr.max_transmit, p);
|
|
STREAM_TO_UINT16 (cfg_info.fcr.rtrans_tout, p);
|
|
STREAM_TO_UINT16 (cfg_info.fcr.mon_tout, p);
|
|
STREAM_TO_UINT16 (cfg_info.fcr.mps, p);
|
|
break;
|
|
|
|
case L2CAP_CFG_TYPE_FCS:
|
|
cfg_info.fcs_present = TRUE;
|
|
STREAM_TO_UINT8 (cfg_info.fcs, p);
|
|
break;
|
|
|
|
case L2CAP_CFG_TYPE_EXT_FLOW:
|
|
cfg_info.ext_flow_spec_present = TRUE;
|
|
STREAM_TO_UINT8 (cfg_info.ext_flow_spec.id, p);
|
|
STREAM_TO_UINT8 (cfg_info.ext_flow_spec.stype, p);
|
|
STREAM_TO_UINT16 (cfg_info.ext_flow_spec.max_sdu_size, p);
|
|
STREAM_TO_UINT32 (cfg_info.ext_flow_spec.sdu_inter_time, p);
|
|
STREAM_TO_UINT32 (cfg_info.ext_flow_spec.access_latency, p);
|
|
STREAM_TO_UINT32 (cfg_info.ext_flow_spec.flush_timeout, p);
|
|
break;
|
|
|
|
default:
|
|
/* sanity check option length */
|
|
if ((cfg_len + L2CAP_CFG_OPTION_OVERHEAD) <= cmd_len) {
|
|
p += cfg_len;
|
|
if ((cfg_code & 0x80) == 0) {
|
|
cfg_rej_len += cfg_len + L2CAP_CFG_OPTION_OVERHEAD;
|
|
cfg_rej = TRUE;
|
|
}
|
|
}
|
|
/* bad length; force loop exit */
|
|
else {
|
|
p = p_cfg_end;
|
|
cfg_rej = TRUE;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) != NULL) {
|
|
p_ccb->remote_id = id;
|
|
if (cfg_rej) {
|
|
l2cu_send_peer_config_rej (p_ccb, p_cfg_start, (UINT16) (cmd_len - L2CAP_CONFIG_REQ_LEN), cfg_rej_len);
|
|
} else {
|
|
l2c_csm_execute (p_ccb, L2CEVT_L2CAP_CONFIG_REQ, &cfg_info);
|
|
}
|
|
} else {
|
|
/* updated spec says send command reject on invalid cid */
|
|
l2cu_send_peer_cmd_reject (p_lcb, L2CAP_CMD_REJ_INVALID_CID, id, 0, 0);
|
|
}
|
|
break;
|
|
|
|
case L2CAP_CMD_CONFIG_RSP:
|
|
p_cfg_end = p + cmd_len;
|
|
STREAM_TO_UINT16 (lcid, p);
|
|
STREAM_TO_UINT16 (cfg_info.flags, p);
|
|
STREAM_TO_UINT16 (cfg_info.result, p);
|
|
|
|
cfg_info.flush_to_present = cfg_info.mtu_present = cfg_info.qos_present =
|
|
cfg_info.fcr_present = cfg_info.fcs_present = FALSE;
|
|
|
|
while (p < p_cfg_end) {
|
|
STREAM_TO_UINT8 (cfg_code, p);
|
|
STREAM_TO_UINT8 (cfg_len, p);
|
|
|
|
switch (cfg_code & 0x7F) {
|
|
case L2CAP_CFG_TYPE_MTU:
|
|
cfg_info.mtu_present = TRUE;
|
|
STREAM_TO_UINT16 (cfg_info.mtu, p);
|
|
break;
|
|
|
|
case L2CAP_CFG_TYPE_FLUSH_TOUT:
|
|
cfg_info.flush_to_present = TRUE;
|
|
STREAM_TO_UINT16 (cfg_info.flush_to, p);
|
|
break;
|
|
|
|
case L2CAP_CFG_TYPE_QOS:
|
|
cfg_info.qos_present = TRUE;
|
|
STREAM_TO_UINT8 (cfg_info.qos.qos_flags, p);
|
|
STREAM_TO_UINT8 (cfg_info.qos.service_type, p);
|
|
STREAM_TO_UINT32 (cfg_info.qos.token_rate, p);
|
|
STREAM_TO_UINT32 (cfg_info.qos.token_bucket_size, p);
|
|
STREAM_TO_UINT32 (cfg_info.qos.peak_bandwidth, p);
|
|
STREAM_TO_UINT32 (cfg_info.qos.latency, p);
|
|
STREAM_TO_UINT32 (cfg_info.qos.delay_variation, p);
|
|
break;
|
|
|
|
case L2CAP_CFG_TYPE_FCR:
|
|
cfg_info.fcr_present = TRUE;
|
|
STREAM_TO_UINT8 (cfg_info.fcr.mode, p);
|
|
STREAM_TO_UINT8 (cfg_info.fcr.tx_win_sz, p);
|
|
STREAM_TO_UINT8 (cfg_info.fcr.max_transmit, p);
|
|
STREAM_TO_UINT16 (cfg_info.fcr.rtrans_tout, p);
|
|
STREAM_TO_UINT16 (cfg_info.fcr.mon_tout, p);
|
|
STREAM_TO_UINT16 (cfg_info.fcr.mps, p);
|
|
break;
|
|
|
|
case L2CAP_CFG_TYPE_FCS:
|
|
cfg_info.fcs_present = TRUE;
|
|
STREAM_TO_UINT8 (cfg_info.fcs, p);
|
|
break;
|
|
|
|
case L2CAP_CFG_TYPE_EXT_FLOW:
|
|
cfg_info.ext_flow_spec_present = TRUE;
|
|
STREAM_TO_UINT8 (cfg_info.ext_flow_spec.id, p);
|
|
STREAM_TO_UINT8 (cfg_info.ext_flow_spec.stype, p);
|
|
STREAM_TO_UINT16 (cfg_info.ext_flow_spec.max_sdu_size, p);
|
|
STREAM_TO_UINT32 (cfg_info.ext_flow_spec.sdu_inter_time, p);
|
|
STREAM_TO_UINT32 (cfg_info.ext_flow_spec.access_latency, p);
|
|
STREAM_TO_UINT32 (cfg_info.ext_flow_spec.flush_timeout, p);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) != NULL) {
|
|
if (p_ccb->local_id != id) {
|
|
L2CAP_TRACE_WARNING ("L2CAP - cfg rsp - bad ID. Exp: %d Got: %d",
|
|
p_ccb->local_id, id);
|
|
break;
|
|
}
|
|
if ( (cfg_info.result == L2CAP_CFG_OK) || (cfg_info.result == L2CAP_CFG_PENDING) ) {
|
|
l2c_csm_execute (p_ccb, L2CEVT_L2CAP_CONFIG_RSP, &cfg_info);
|
|
} else {
|
|
l2c_csm_execute (p_ccb, L2CEVT_L2CAP_CONFIG_RSP_NEG, &cfg_info);
|
|
}
|
|
} else {
|
|
L2CAP_TRACE_WARNING ("L2CAP - rcvd cfg rsp for unknown CID: 0x%04x", lcid);
|
|
}
|
|
break;
|
|
|
|
|
|
case L2CAP_CMD_DISC_REQ:
|
|
STREAM_TO_UINT16 (lcid, p);
|
|
STREAM_TO_UINT16 (rcid, p);
|
|
|
|
if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) != NULL) {
|
|
if (p_ccb->remote_cid == rcid) {
|
|
p_ccb->remote_id = id;
|
|
l2c_csm_execute (p_ccb, L2CEVT_L2CAP_DISCONNECT_REQ, &con_info);
|
|
}
|
|
} else {
|
|
l2cu_send_peer_disc_rsp (p_lcb, id, lcid, rcid);
|
|
}
|
|
|
|
break;
|
|
|
|
case L2CAP_CMD_DISC_RSP:
|
|
STREAM_TO_UINT16 (rcid, p);
|
|
STREAM_TO_UINT16 (lcid, p);
|
|
|
|
if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) != NULL) {
|
|
if ((p_ccb->remote_cid == rcid) && (p_ccb->local_id == id)) {
|
|
l2c_csm_execute (p_ccb, L2CEVT_L2CAP_DISCONNECT_RSP, &con_info);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case L2CAP_CMD_ECHO_REQ:
|
|
l2cu_send_peer_echo_rsp (p_lcb, id, NULL, 0);
|
|
break;
|
|
|
|
case L2CAP_CMD_ECHO_RSP:
|
|
if (p_lcb->p_echo_rsp_cb) {
|
|
tL2CA_ECHO_RSP_CB *p_cb = p_lcb->p_echo_rsp_cb;
|
|
|
|
/* Zero out the callback in case app immediately calls us again */
|
|
p_lcb->p_echo_rsp_cb = NULL;
|
|
|
|
(*p_cb) (L2CAP_PING_RESULT_OK);
|
|
}
|
|
break;
|
|
|
|
case L2CAP_CMD_INFO_REQ:
|
|
STREAM_TO_UINT16 (info_type, p);
|
|
l2cu_send_peer_info_rsp (p_lcb, id, info_type);
|
|
break;
|
|
|
|
case L2CAP_CMD_INFO_RSP:
|
|
/* Stop the link connect timer if sent before L2CAP connection is up */
|
|
if (p_lcb->w4_info_rsp) {
|
|
btu_stop_timer (&p_lcb->info_timer_entry);
|
|
p_lcb->w4_info_rsp = FALSE;
|
|
}
|
|
|
|
STREAM_TO_UINT16 (info_type, p);
|
|
STREAM_TO_UINT16 (result, p);
|
|
|
|
p_lcb->info_rx_bits |= (1 << info_type);
|
|
|
|
if ( (info_type == L2CAP_EXTENDED_FEATURES_INFO_TYPE)
|
|
&& (result == L2CAP_INFO_RESP_RESULT_SUCCESS) ) {
|
|
STREAM_TO_UINT32( p_lcb->peer_ext_fea, p );
|
|
|
|
#if (L2CAP_NUM_FIXED_CHNLS > 0)
|
|
if (p_lcb->peer_ext_fea & L2CAP_EXTFEA_FIXED_CHNLS) {
|
|
l2cu_send_peer_info_req (p_lcb, L2CAP_FIXED_CHANNELS_INFO_TYPE);
|
|
break;
|
|
} else {
|
|
l2cu_process_fixed_chnl_resp (p_lcb);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
|
|
#if (L2CAP_NUM_FIXED_CHNLS > 0)
|
|
if (info_type == L2CAP_FIXED_CHANNELS_INFO_TYPE) {
|
|
if (result == L2CAP_INFO_RESP_RESULT_SUCCESS) {
|
|
memcpy (p_lcb->peer_chnl_mask, p, L2CAP_FIXED_CHNL_ARRAY_SIZE);
|
|
}
|
|
|
|
l2cu_process_fixed_chnl_resp (p_lcb);
|
|
}
|
|
#endif
|
|
#if (L2CAP_UCD_INCLUDED == TRUE)
|
|
else if (info_type == L2CAP_CONNLESS_MTU_INFO_TYPE) {
|
|
if (result == L2CAP_INFO_RESP_RESULT_SUCCESS) {
|
|
STREAM_TO_UINT16 (p_lcb->ucd_mtu, p);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
ci.status = HCI_SUCCESS;
|
|
memcpy (ci.bd_addr, p_lcb->remote_bd_addr, sizeof(BD_ADDR));
|
|
for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb) {
|
|
l2c_csm_execute (p_ccb, L2CEVT_L2CAP_INFO_RSP, &ci);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
L2CAP_TRACE_WARNING ("L2CAP - bad cmd code: %d", cmd_code);
|
|
l2cu_send_peer_cmd_reject (p_lcb, L2CAP_CMD_REJ_NOT_UNDERSTOOD, id, 0, 0);
|
|
return;
|
|
}
|
|
}
|
|
|
|
}
|
|
#endif ///CLASSIC_BT_INCLUDED == TRUE
|
|
|
|
|
|
/*******************************************************************************
|
|
**
|
|
** Function l2c_process_held_packets
|
|
**
|
|
** Description This function processes any L2CAP packets that arrived before
|
|
** the HCI connection complete arrived. It is a work around for
|
|
** badly behaved controllers.
|
|
**
|
|
** Returns void
|
|
**
|
|
*******************************************************************************/
|
|
void l2c_process_held_packets(BOOLEAN timed_out)
|
|
{
|
|
if (list_is_empty(l2cb.rcv_pending_q)) {
|
|
return;
|
|
}
|
|
|
|
if (!timed_out) {
|
|
btu_stop_timer(&l2cb.rcv_hold_tle);
|
|
L2CAP_TRACE_WARNING("L2CAP HOLD CONTINUE");
|
|
} else {
|
|
L2CAP_TRACE_WARNING("L2CAP HOLD TIMEOUT");
|
|
}
|
|
|
|
for (const list_node_t *node = list_begin(l2cb.rcv_pending_q);
|
|
node != list_end(l2cb.rcv_pending_q);) {
|
|
BT_HDR *p_buf = list_node(node);
|
|
node = list_next(node);
|
|
if (!timed_out || (!p_buf->layer_specific) || (--p_buf->layer_specific == 0)) {
|
|
list_remove(l2cb.rcv_pending_q, p_buf);
|
|
p_buf->layer_specific = 0xFFFF;
|
|
l2c_rcv_acl_data(p_buf);
|
|
}
|
|
}
|
|
|
|
/* If anyone still in the queue, restart the timeout */
|
|
if (!list_is_empty(l2cb.rcv_pending_q)) {
|
|
btu_start_timer (&l2cb.rcv_hold_tle, BTU_TTYPE_L2CAP_HOLD, BT_1SEC_TIMEOUT);
|
|
}
|
|
}
|
|
|
|
|
|
/*******************************************************************************
|
|
**
|
|
** Function l2c_init
|
|
**
|
|
** Description This function is called once at startup to initialize
|
|
** all the L2CAP structures
|
|
**
|
|
** Returns void
|
|
**
|
|
*******************************************************************************/
|
|
void l2c_init (void)
|
|
{
|
|
INT16 xx;
|
|
#if L2C_DYNAMIC_MEMORY
|
|
l2c_cb_ptr = (tL2C_CB *)osi_malloc(sizeof(tL2C_CB));
|
|
#endif /* #if L2C_DYNAMIC_MEMORY */
|
|
memset (&l2cb, 0, sizeof (tL2C_CB));
|
|
/* the psm is increased by 2 before being used */
|
|
l2cb.dyn_psm = 0xFFF;
|
|
|
|
/* Put all the channel control blocks on the free queue */
|
|
for (xx = 0; xx < MAX_L2CAP_CHANNELS - 1; xx++) {
|
|
l2cb.ccb_pool[xx].p_next_ccb = &l2cb.ccb_pool[xx + 1];
|
|
}
|
|
|
|
#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
|
|
/* it will be set to L2CAP_PKT_START_NON_FLUSHABLE if controller supports */
|
|
l2cb.non_flushable_pbf = L2CAP_PKT_START << L2CAP_PKT_TYPE_SHIFT;
|
|
#endif
|
|
|
|
|
|
l2cb.p_free_ccb_first = &l2cb.ccb_pool[0];
|
|
l2cb.p_free_ccb_last = &l2cb.ccb_pool[MAX_L2CAP_CHANNELS - 1];
|
|
|
|
#ifdef L2CAP_DESIRED_LINK_ROLE
|
|
l2cb.desire_role = L2CAP_DESIRED_LINK_ROLE;
|
|
#else
|
|
l2cb.desire_role = HCI_ROLE_SLAVE;
|
|
#endif
|
|
|
|
/* Set the default idle timeout */
|
|
l2cb.idle_timeout = L2CAP_LINK_INACTIVITY_TOUT;
|
|
|
|
#if defined(L2CAP_INITIAL_TRACE_LEVEL)
|
|
l2cb.l2cap_trace_level = L2CAP_INITIAL_TRACE_LEVEL;
|
|
#else
|
|
l2cb.l2cap_trace_level = BT_TRACE_LEVEL_NONE; /* No traces */
|
|
#endif
|
|
|
|
#if L2CAP_CONFORMANCE_TESTING == TRUE
|
|
/* Conformance testing needs a dynamic response */
|
|
l2cb.test_info_resp = L2CAP_EXTFEA_SUPPORTED_MASK;
|
|
#endif
|
|
|
|
/* Number of ACL buffers to use for high priority channel */
|
|
#if (defined(L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE) && (L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE == TRUE))
|
|
l2cb.high_pri_min_xmit_quota = L2CAP_HIGH_PRI_MIN_XMIT_QUOTA;
|
|
#endif
|
|
|
|
#if BLE_INCLUDED == TRUE
|
|
l2cb.l2c_ble_fixed_chnls_mask =
|
|
L2CAP_FIXED_CHNL_ATT_BIT | L2CAP_FIXED_CHNL_BLE_SIG_BIT | L2CAP_FIXED_CHNL_SMP_BIT;
|
|
#endif
|
|
|
|
l2cb.rcv_pending_q = list_new(NULL);
|
|
if (l2cb.rcv_pending_q == NULL) {
|
|
L2CAP_TRACE_ERROR("%s unable to allocate memory for link layer control block", __func__);
|
|
}
|
|
}
|
|
|
|
void l2c_free(void)
|
|
{
|
|
list_free(l2cb.rcv_pending_q);
|
|
l2cb.rcv_pending_q = NULL;
|
|
#if L2C_DYNAMIC_MEMORY
|
|
FREE_AND_RESET(l2c_cb_ptr);
|
|
#endif
|
|
}
|
|
|
|
/*******************************************************************************
|
|
**
|
|
** Function l2c_process_timeout
|
|
**
|
|
** Description This function is called when an L2CAP-related timeout occurs
|
|
**
|
|
** Returns void
|
|
**
|
|
*******************************************************************************/
|
|
void l2c_process_timeout (TIMER_LIST_ENT *p_tle)
|
|
{
|
|
/* What type of timeout ? */
|
|
switch (p_tle->event) {
|
|
case BTU_TTYPE_L2CAP_LINK:
|
|
l2c_link_timeout ((tL2C_LCB *)p_tle->param);
|
|
break;
|
|
#if (CLASSIC_BT_INCLUDED == TRUE)
|
|
case BTU_TTYPE_L2CAP_CHNL:
|
|
l2c_csm_execute (((tL2C_CCB *)p_tle->param), L2CEVT_TIMEOUT, NULL);
|
|
break;
|
|
|
|
case BTU_TTYPE_L2CAP_FCR_ACK:
|
|
l2c_csm_execute (((tL2C_CCB *)p_tle->param), L2CEVT_ACK_TIMEOUT, NULL);
|
|
break;
|
|
#endif ///CLASSIC_BT_INCLUDED == TRUE
|
|
case BTU_TTYPE_L2CAP_HOLD:
|
|
/* Update the timeouts in the hold queue */
|
|
l2c_process_held_packets(TRUE);
|
|
break;
|
|
|
|
case BTU_TTYPE_L2CAP_INFO:
|
|
l2c_info_timeout((tL2C_LCB *)p_tle->param);
|
|
break;
|
|
case BTU_TTYPE_L2CAP_UPDA_CONN_PARAMS: {
|
|
UINT8 status = HCI_ERR_HOST_TIMEOUT;
|
|
tL2C_LCB *p_lcb = (tL2C_LCB *)p_tle->param;
|
|
if (p_lcb){
|
|
p_lcb->conn_update_mask &= ~L2C_BLE_UPDATE_PENDING;
|
|
p_lcb->conn_update_mask &= ~L2C_BLE_UPDATE_PARAM_FULL;
|
|
}
|
|
l2c_send_update_conn_params_cb(p_lcb, status);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*******************************************************************************
|
|
**
|
|
** Function l2c_data_write
|
|
**
|
|
** Description API functions call this function to write data.
|
|
**
|
|
** Returns L2CAP_DW_SUCCESS, if data accepted, else FALSE
|
|
** L2CAP_DW_CONGESTED, if data accepted and the channel is congested
|
|
** L2CAP_DW_FAILED, if error
|
|
**
|
|
*******************************************************************************/
|
|
#if (CLASSIC_BT_INCLUDED == TRUE)
|
|
UINT8 l2c_data_write (UINT16 cid, BT_HDR *p_data, UINT16 flags)
|
|
{
|
|
tL2C_CCB *p_ccb;
|
|
|
|
/* Find the channel control block. We don't know the link it is on. */
|
|
if ((p_ccb = l2cu_find_ccb_by_cid (NULL, cid)) == NULL) {
|
|
L2CAP_TRACE_WARNING ("L2CAP - no CCB for L2CA_DataWrite, CID: %d", cid);
|
|
osi_free (p_data);
|
|
return (L2CAP_DW_FAILED);
|
|
}
|
|
|
|
#ifndef TESTER /* Tester may send any amount of data. otherwise sending message
|
|
bigger than mtu size of peer is a violation of protocol */
|
|
if (p_data->len > p_ccb->peer_cfg.mtu) {
|
|
L2CAP_TRACE_WARNING ("L2CAP - CID: 0x%04x cannot send message bigger than peer's mtu size", cid);
|
|
osi_free (p_data);
|
|
return (L2CAP_DW_FAILED);
|
|
}
|
|
#endif
|
|
|
|
/* channel based, packet based flushable or non-flushable */
|
|
p_data->layer_specific = flags;
|
|
|
|
/* If already congested, do not accept any more packets */
|
|
if (p_ccb->cong_sent) {
|
|
L2CAP_TRACE_ERROR ("L2CAP - CID: 0x%04x cannot send, already congested xmit_hold_q.count: %u buff_quota: %u",
|
|
p_ccb->local_cid,
|
|
fixed_queue_length(p_ccb->xmit_hold_q),
|
|
p_ccb->buff_quota);
|
|
|
|
osi_free (p_data);
|
|
return (L2CAP_DW_FAILED);
|
|
}
|
|
|
|
//counter_add("l2cap.dyn.tx.bytes", p_data->len);
|
|
//counter_add("l2cap.dyn.tx.pkts", 1);
|
|
|
|
l2c_csm_execute (p_ccb, L2CEVT_L2CA_DATA_WRITE, p_data);
|
|
|
|
if (p_ccb->cong_sent) {
|
|
return (L2CAP_DW_CONGESTED);
|
|
}
|
|
return (L2CAP_DW_SUCCESS);
|
|
}
|
|
#endif ///CLASSIC_BT_INCLUDED == TRUE
|
|
|
|
|