OVMS3-idf/examples/protocols/websocket
Marius Vikhammer f542c979e9 tcp_transport/ws_client: websockets now correctly handle messages longer than buffer
transport_ws can now be read multiple times in a row to read frames larger than the buffer.

Added reporting of total payload length and offset to the user in websocket_client.

Added local example test for long messages.

Closes IDF-1083
2020-02-28 10:53:08 +08:00
..
main tcp_transport/ws_client: websockets now correctly handle messages longer than buffer 2020-02-28 10:53:08 +08:00
CMakeLists.txt esp_websocket_client: Add websocket client component 2019-06-20 15:37:40 +08:00
example_test.py tcp_transport/ws_client: websockets now correctly handle messages longer than buffer 2020-02-28 10:53:08 +08:00
Makefile esp_websocket_client: Add websocket client component 2019-06-20 15:37:40 +08:00
README.md websocket_client: added example_test with a local websocket server 2020-01-03 15:03:27 +08:00
sdkconfig.ci websocket_client: added example_test with a local websocket server 2020-01-03 15:03:27 +08:00

Websocket Sample application

(See the README.md file in the upper level 'examples' directory for more information about examples.) This example will shows how to set up and communicate over a websocket.

How to Use Example

Hardware Required

This example can be executed on any ESP32 board, the only required interface is WiFi and connection to internet or a local server.

Configure the project

  • Open the project configuration menu (idf.py menuconfig)
  • Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.
  • Configure the websocket endpoint URI under "Example Configuration", if "WEBSOCKET_URI_FROM_STDIN" is selected then the example application will connect to the URI it reads from stdin (used for testing)

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (482) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (2492) example_connect: Ethernet Link Up
I (4472) tcpip_adapter: eth ip: 192.168.2.137, mask: 255.255.255.0, gw: 192.168.2.2
I (4472) example_connect: Connected to Ethernet
I (4472) example_connect: IPv4 address: 192.168.2.137
I (4472) example_connect: IPv6 address: fe80:0000:0000:0000:bedd:c2ff:fed4:a92b
I (4482) WEBSOCKET: Connecting to ws://echo.websocket.org...
I (5012) WEBSOCKET: WEBSOCKET_EVENT_CONNECTED
I (5492) WEBSOCKET: Sending hello 0000
I (6052) WEBSOCKET: WEBSOCKET_EVENT_DATA
W (6052) WEBSOCKET: Received=hello 0000

I (6492) WEBSOCKET: Sending hello 0001
I (7052) WEBSOCKET: WEBSOCKET_EVENT_DATA
W (7052) WEBSOCKET: Received=hello 0001

I (7492) WEBSOCKET: Sending hello 0002
I (8082) WEBSOCKET: WEBSOCKET_EVENT_DATA
W (8082) WEBSOCKET: Received=hello 0002

I (8492) WEBSOCKET: Sending hello 0003
I (9152) WEBSOCKET: WEBSOCKET_EVENT_DATA
W (9162) WEBSOCKET: Received=hello 0003