2ec0fd8fd6
secure boot: Support signed app verification without hardware secure boot See merge request idf/esp-idf!2814
409 lines
18 KiB
Plaintext
409 lines
18 KiB
Plaintext
menu "Bootloader config"
|
|
choice LOG_BOOTLOADER_LEVEL
|
|
bool "Bootloader log verbosity"
|
|
default LOG_BOOTLOADER_LEVEL_INFO
|
|
help
|
|
Specify how much output to see in bootloader logs.
|
|
|
|
config LOG_BOOTLOADER_LEVEL_NONE
|
|
bool "No output"
|
|
config LOG_BOOTLOADER_LEVEL_ERROR
|
|
bool "Error"
|
|
config LOG_BOOTLOADER_LEVEL_WARN
|
|
bool "Warning"
|
|
config LOG_BOOTLOADER_LEVEL_INFO
|
|
bool "Info"
|
|
config LOG_BOOTLOADER_LEVEL_DEBUG
|
|
bool "Debug"
|
|
config LOG_BOOTLOADER_LEVEL_VERBOSE
|
|
bool "Verbose"
|
|
endchoice
|
|
|
|
config LOG_BOOTLOADER_LEVEL
|
|
int
|
|
default 0 if LOG_BOOTLOADER_LEVEL_NONE
|
|
default 1 if LOG_BOOTLOADER_LEVEL_ERROR
|
|
default 2 if LOG_BOOTLOADER_LEVEL_WARN
|
|
default 3 if LOG_BOOTLOADER_LEVEL_INFO
|
|
default 4 if LOG_BOOTLOADER_LEVEL_DEBUG
|
|
default 5 if LOG_BOOTLOADER_LEVEL_VERBOSE
|
|
|
|
config BOOTLOADER_SPI_WP_PIN
|
|
int "SPI Flash WP Pin when customising pins via efuse (read help)"
|
|
range 0 33
|
|
default 7
|
|
depends on FLASHMODE_QIO || FLASHMODE_QOUT
|
|
help
|
|
This value is ignored unless flash mode is set to QIO or QOUT *and* the SPI flash pins have been
|
|
overriden by setting the efuses SPI_PAD_CONFIG_xxx.
|
|
|
|
When this is the case, the Efuse config only defines 3 of the 4 Quad I/O data pins. The WP pin (aka ESP32
|
|
pin "SD_DATA_3" or SPI flash pin "IO2") is not specified in Efuse. That pin number is compiled into the bootloader
|
|
instead.
|
|
|
|
The default value (GPIO 7) is correct for WP pin on ESP32-D2WD integrated flash.
|
|
|
|
choice BOOTLOADER_VDDSDIO_BOOST
|
|
bool "VDDSDIO LDO voltage"
|
|
default BOOTLOADER_VDDSDIO_BOOST_1_9V
|
|
help
|
|
If this option is enabled, and VDDSDIO LDO is set to 1.8V (using EFUSE
|
|
or MTDI bootstrapping pin), bootloader will change LDO settings to
|
|
output 1.9V instead. This helps prevent flash chip from browning out
|
|
during flash programming operations.
|
|
|
|
This option has no effect if VDDSDIO is set to 3.3V, or if the internal
|
|
VDDSDIO regulator is disabled via efuse.
|
|
|
|
config BOOTLOADER_VDDSDIO_BOOST_1_8V
|
|
bool "1.8V"
|
|
depends on !ESPTOOLPY_FLASHFREQ_80M
|
|
config BOOTLOADER_VDDSDIO_BOOST_1_9V
|
|
bool "1.9V"
|
|
endchoice
|
|
|
|
config BOOTLOADER_FACTORY_RESET
|
|
bool "GPIO triggers factory reset"
|
|
default N
|
|
help
|
|
Allows to reset the device to factory settings:
|
|
- clear one or more data partitions;
|
|
- boot from "factory" partition.
|
|
The factory reset will occur if there is a GPIO input pulled low while device starts up.
|
|
See settings below.
|
|
|
|
config BOOTLOADER_NUM_PIN_FACTORY_RESET
|
|
int "Number of the GPIO input for factory reset"
|
|
depends on BOOTLOADER_FACTORY_RESET
|
|
range 0 39
|
|
default 4
|
|
help
|
|
The selected GPIO will be configured as an input with internal pull-up enabled.
|
|
To trigger a factory reset, this GPIO must be pulled low on reset.
|
|
Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
|
|
|
|
config BOOTLOADER_OTA_DATA_ERASE
|
|
bool "Clear OTA data on factory reset (select factory partition)"
|
|
depends on BOOTLOADER_FACTORY_RESET
|
|
help
|
|
The device will boot from "factory" partition (or OTA slot 0 if no factory partition is present) after a factory reset.
|
|
|
|
config BOOTLOADER_DATA_FACTORY_RESET
|
|
string "Comma-separated names of partitions to clear on factory reset"
|
|
depends on BOOTLOADER_FACTORY_RESET
|
|
default "nvs"
|
|
help
|
|
Allows customers to select which data partitions will be erased while factory reset.
|
|
|
|
Specify the names of partitions as a comma-delimited with optional spaces for readability. (Like this: "nvs, phy_init, ...")
|
|
Make sure that the name specified in the partition table and here are the same.
|
|
Partitions of type "app" cannot be specified here.
|
|
|
|
config BOOTLOADER_APP_TEST
|
|
bool "GPIO triggers boot from test app partition"
|
|
default N
|
|
help
|
|
Allows to run the test app from "TEST" partition.
|
|
A boot from "test" partition will occur if there is a GPIO input pulled low while device starts up.
|
|
See settings below.
|
|
|
|
config BOOTLOADER_NUM_PIN_APP_TEST
|
|
int "Number of the GPIO input to boot TEST partition"
|
|
depends on BOOTLOADER_APP_TEST
|
|
range 0 39
|
|
default 18
|
|
help
|
|
The selected GPIO will be configured as an input with internal pull-up enabled.
|
|
To trigger a test app, this GPIO must be pulled low on reset.
|
|
After the GPIO input is deactivated and the device reboots, the old application will boot.
|
|
(factory or OTA[x]).
|
|
Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
|
|
|
|
config BOOTLOADER_HOLD_TIME_GPIO
|
|
int "Hold time of GPIO for reset/test mode (seconds)"
|
|
depends on BOOTLOADER_FACTORY_RESET || BOOTLOADER_APP_TEST
|
|
default 5
|
|
help
|
|
The GPIO must be held low continuously for this period of time after reset
|
|
before a factory reset or test partition boot (as applicable) is performed.
|
|
|
|
config BOOTLOADER_WDT_ENABLE
|
|
bool "Use RTC watchdog in start code"
|
|
default y
|
|
help
|
|
Tracks the execution time of startup code.
|
|
If the execution time is exceeded, the RTC_WDT will restart system.
|
|
It is also useful to prevent a lock up in start code caused by an unstable power source.
|
|
NOTE: Tracks the execution time starts from the bootloader code - re-set timeout, while selecting the source for slow_clk - and ends calling app_main.
|
|
Re-set timeout is needed due to WDT uses a SLOW_CLK clock source. After changing a frequency slow_clk a time of WDT needs to re-set for new frequency.
|
|
slow_clk depends on ESP32_RTC_CLOCK_SOURCE (INTERNAL_RC or EXTERNAL_CRYSTAL).
|
|
|
|
config BOOTLOADER_WDT_DISABLE_IN_USER_CODE
|
|
bool "Allows RTC watchdog disable in user code"
|
|
depends on BOOTLOADER_WDT_ENABLE
|
|
default n
|
|
help
|
|
If it is set, the client must itself reset or disable rtc_wdt in their code (app_main()).
|
|
Otherwise rtc_wdt will be disabled before calling app_main function.
|
|
Use function rtc_wdt_feed() for resetting counter of rtc_wdt.
|
|
Use function rtc_wdt_disable() for disabling rtc_wdt.
|
|
|
|
config BOOTLOADER_WDT_TIME_MS
|
|
int "Timeout for RTC watchdog (ms)"
|
|
depends on BOOTLOADER_WDT_ENABLE
|
|
default 9000
|
|
range 0 120000
|
|
help
|
|
Verify that this parameter is correct and more then the execution time.
|
|
Pay attention to options such as reset to factory, trigger test partition and encryption on boot
|
|
- these options can increase the execution time.
|
|
Note: RTC_WDT will reset while encryption operations will be performed.
|
|
|
|
endmenu # Bootloader
|
|
|
|
|
|
menu "Security features"
|
|
|
|
# These three are the actual options to check in code,
|
|
# selected by the displayed options
|
|
config SECURE_SIGNED_ON_BOOT
|
|
bool
|
|
default y
|
|
depends on SECURE_BOOT_ENABLED || SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT
|
|
|
|
config SECURE_SIGNED_ON_UPDATE
|
|
bool
|
|
default y
|
|
depends on SECURE_BOOT_ENABLED || SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
|
|
|
|
config SECURE_SIGNED_APPS
|
|
bool
|
|
default y
|
|
depends on SECURE_SIGNED_ON_BOOT || SECURE_SIGNED_ON_UPDATE
|
|
|
|
|
|
config SECURE_SIGNED_APPS_NO_SECURE_BOOT
|
|
bool "Require signed app images"
|
|
default n
|
|
depends on !SECURE_BOOT_ENABLED
|
|
help
|
|
Require apps to be signed to verify their integrity.
|
|
|
|
This option uses the same app signature scheme as hardware secure boot, but unlike hardware secure boot it does not prevent the bootloader from being physically updated. This means that the device can be secured against remote network access, but not physical access. Compared to using hardware Secure Boot this option is much simpler to implement.
|
|
|
|
config SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT
|
|
bool "Bootloader verifies app signatures"
|
|
default n
|
|
depends on SECURE_SIGNED_APPS_NO_SECURE_BOOT
|
|
help
|
|
If this option is set, the bootloader will be compiled with code to verify that an app is signed before booting it.
|
|
|
|
If hardware secure boot is enabled, this option is always enabled and cannot be disabled.
|
|
If hardware secure boot is not enabled, this option doesn't add significant security by itself so most users will want to leave it disabled.
|
|
|
|
config SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
|
|
bool "Verify app signature on update"
|
|
default y
|
|
depends on SECURE_SIGNED_APPS_NO_SECURE_BOOT
|
|
help
|
|
If this option is set, any OTA updated apps will have the signature verified before being considered valid.
|
|
|
|
When enabled, the signature is automatically checked whenever the esp_ota_ops.h APIs are used for OTA updates,
|
|
or esp_image_format.h APIs are used to verify apps.
|
|
|
|
If hardware secure boot is enabled, this option is always enabled and cannot be disabled.
|
|
If hardware secure boot is not enabled, this option still adds significant security against network-based attackers by preventing spoofing of OTA updates.
|
|
|
|
config SECURE_BOOT_ENABLED
|
|
bool "Enable hardware secure boot in bootloader (READ DOCS FIRST)"
|
|
default n
|
|
help
|
|
Build a bootloader which enables secure boot on first boot.
|
|
|
|
Once enabled, secure boot will not boot a modified bootloader. The bootloader will only load a partition table or boot an app if the data has a verified digital signature. There are implications for reflashing updated apps once secure boot is enabled.
|
|
|
|
When enabling secure boot, JTAG and ROM BASIC Interpreter are permanently disabled by default.
|
|
|
|
Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
|
|
|
|
choice SECURE_BOOTLOADER_MODE
|
|
bool "Secure bootloader mode"
|
|
depends on SECURE_BOOT_ENABLED
|
|
default SECURE_BOOTLOADER_ONE_TIME_FLASH
|
|
|
|
config SECURE_BOOTLOADER_ONE_TIME_FLASH
|
|
bool "One-time flash"
|
|
help
|
|
On first boot, the bootloader will generate a key which is not readable externally or by software. A digest is generated from the bootloader image itself. This digest will be verified on each subsequent boot.
|
|
|
|
Enabling this option means that the bootloader cannot be changed after the first time it is booted.
|
|
|
|
config SECURE_BOOTLOADER_REFLASHABLE
|
|
bool "Reflashable"
|
|
help
|
|
Generate a reusable secure bootloader key, derived (via SHA-256) from the secure boot signing key.
|
|
|
|
This allows the secure bootloader to be re-flashed by anyone with access to the secure boot signing key.
|
|
|
|
This option is less secure than one-time flash, because a leak of the digest key from one device allows reflashing of any device that uses it.
|
|
|
|
endchoice
|
|
|
|
config SECURE_BOOT_BUILD_SIGNED_BINARIES
|
|
bool "Sign binaries during build"
|
|
depends on SECURE_SIGNED_APPS
|
|
default y
|
|
help
|
|
Once secure boot or signed app requirement is enabled, app images are required to be signed.
|
|
|
|
If enabled (default), these binary files are signed as part of the build process. The file named in "Secure boot private signing key" will be used to sign the image.
|
|
|
|
If disabled, unsigned app/partition data will be built. They must be signed manually using espsecure.py (for example, on a remote signing server.)
|
|
|
|
config SECURE_BOOT_SIGNING_KEY
|
|
string "Secure boot private signing key"
|
|
depends on SECURE_BOOT_BUILD_SIGNED_BINARIES
|
|
default secure_boot_signing_key.pem
|
|
help
|
|
Path to the key file used to sign app images.
|
|
|
|
Key file is an ECDSA private key (NIST256p curve) in PEM format.
|
|
|
|
Path is evaluated relative to the project directory.
|
|
|
|
You can generate a new signing key by running the following command:
|
|
espsecure.py generate_signing_key secure_boot_signing_key.pem
|
|
|
|
See docs/security/secure-boot.rst for details.
|
|
|
|
config SECURE_BOOT_VERIFICATION_KEY
|
|
string "Secure boot public signature verification key"
|
|
depends on SECURE_SIGNED_APPS && !SECURE_BOOT_BUILD_SIGNED_BINARIES
|
|
default signature_verification_key.bin
|
|
help
|
|
Path to a public key file used to verify signed images. This key is compiled into the bootloader and/or app,
|
|
to verify app images.
|
|
|
|
Key file is in raw binary format, and can be extracted from a
|
|
PEM formatted private key using the espsecure.py
|
|
extract_public_key command.
|
|
|
|
Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
|
|
|
|
config SECURE_BOOT_INSECURE
|
|
bool "Allow potentially insecure options"
|
|
depends on SECURE_BOOT_ENABLED
|
|
default N
|
|
help
|
|
You can disable some of the default protections offered by secure boot, in order to enable testing or a custom combination of security features.
|
|
|
|
Only enable these options if you are very sure.
|
|
|
|
Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
|
|
|
|
config FLASH_ENCRYPTION_ENABLED
|
|
bool "Enable flash encryption on boot (READ DOCS FIRST)"
|
|
default N
|
|
help
|
|
If this option is set, flash contents will be encrypted by the bootloader on first boot.
|
|
|
|
Note: After first boot, the system will be permanently encrypted. Re-flashing an encrypted
|
|
system is complicated and not always possible.
|
|
|
|
Read https://docs.espressif.com/projects/esp-idf/en/latest/security/flash-encryption.html before enabling.
|
|
|
|
config FLASH_ENCRYPTION_INSECURE
|
|
bool "Allow potentially insecure options"
|
|
depends on FLASH_ENCRYPTION_ENABLED
|
|
default N
|
|
help
|
|
You can disable some of the default protections offered by flash encryption, in order to enable testing or a custom combination of security features.
|
|
|
|
Only enable these options if you are very sure.
|
|
|
|
Refer to docs/security/secure-boot.rst and docs/security/flash-encryption.rst for details.
|
|
|
|
menu "Potentially insecure options"
|
|
visible if FLASH_ENCRYPTION_INSECURE || SECURE_BOOT_INSECURE
|
|
|
|
# NOTE: Options in this menu NEED to have SECURE_BOOT_INSECURE
|
|
# and/or FLASH_ENCRYPTION_INSECURE in "depends on", as the menu
|
|
# itself doesn't enable/disable its children (if it's not set,
|
|
# it's possible for the insecure menu to be disabled but the insecure option
|
|
# to remain on which is very bad.)
|
|
|
|
config SECURE_BOOT_ALLOW_ROM_BASIC
|
|
bool "Leave ROM BASIC Interpreter available on reset"
|
|
depends on SECURE_BOOT_INSECURE || FLASH_ENCRYPTION_INSECURE
|
|
default N
|
|
help
|
|
By default, the BASIC ROM Console starts on reset if no valid bootloader is
|
|
read from the flash.
|
|
|
|
When either flash encryption or secure boot are enabled, the default is to
|
|
disable this BASIC fallback mode permanently via efuse.
|
|
|
|
If this option is set, this efuse is not burned and the BASIC ROM Console may
|
|
remain accessible. Only set this option in testing environments.
|
|
|
|
config SECURE_BOOT_ALLOW_JTAG
|
|
bool "Allow JTAG Debugging"
|
|
depends on SECURE_BOOT_INSECURE || FLASH_ENCRYPTION_INSECURE
|
|
default N
|
|
help
|
|
If not set (default), the bootloader will permanently disable JTAG (across entire chip) on first boot when either secure boot or flash encryption is enabled.
|
|
|
|
Setting this option leaves JTAG on for debugging, which negates all protections of flash encryption and some of the protections of secure boot.
|
|
|
|
Only set this option in testing environments.
|
|
|
|
config SECURE_BOOT_ALLOW_SHORT_APP_PARTITION
|
|
bool "Allow app partition length not 64KB aligned"
|
|
depends on SECURE_BOOT_INSECURE
|
|
help
|
|
If not set (default), app partition size must be a multiple of 64KB. App images are padded to 64KB length, and the bootloader checks any trailing bytes after the signature (before the next 64KB boundary) have not been written. This is because flash cache maps entire 64KB pages into the address space. This prevents an attacker from appending unverified data after the app image in the flash, causing it to be mapped into the address space.
|
|
|
|
Setting this option allows the app partition length to be unaligned, and disables padding of the app image to this length. It is generally not recommended to set this option, unless you have a legacy partitioning scheme which doesn't support 64KB aligned partition lengths.
|
|
|
|
config FLASH_ENCRYPTION_UART_BOOTLOADER_ALLOW_ENCRYPT
|
|
bool "Leave UART bootloader encryption enabled"
|
|
depends on FLASH_ENCRYPTION_INSECURE
|
|
default N
|
|
help
|
|
If not set (default), the bootloader will permanently disable UART bootloader encryption access on first boot. If set, the UART bootloader will still be able to access hardware encryption.
|
|
|
|
It is recommended to only set this option in testing environments.
|
|
|
|
config FLASH_ENCRYPTION_UART_BOOTLOADER_ALLOW_DECRYPT
|
|
bool "Leave UART bootloader decryption enabled"
|
|
depends on FLASH_ENCRYPTION_INSECURE
|
|
default N
|
|
help
|
|
If not set (default), the bootloader will permanently disable UART bootloader decryption access on first boot. If set, the UART bootloader will still be able to access hardware decryption.
|
|
|
|
Only set this option in testing environments. Setting this option allows complete bypass of flash encryption.
|
|
|
|
config FLASH_ENCRYPTION_UART_BOOTLOADER_ALLOW_CACHE
|
|
bool "Leave UART bootloader flash cache enabled"
|
|
depends on FLASH_ENCRYPTION_INSECURE
|
|
default N
|
|
help
|
|
If not set (default), the bootloader will permanently disable UART bootloader flash cache access on first boot. If set, the UART bootloader will still be able to access the flash cache.
|
|
|
|
Only set this option in testing environments.
|
|
|
|
config SECURE_BOOT_TEST_MODE
|
|
bool "Secure boot test mode: don't permanently set any efuses"
|
|
depends on SECURE_BOOT_INSECURE
|
|
default N
|
|
help
|
|
If this option is set, all permanent secure boot changes (via Efuse) are disabled.
|
|
|
|
Log output will state changes which would be applied, but they will not be.
|
|
|
|
This option is for testing purposes only - it completely disables secure boot protection.
|
|
|
|
|
|
endmenu # Potentially Insecure
|
|
endmenu # Security features
|