OVMS3-idf/examples/wifi/power_save/main/power_save.c
Jakob Hasse 1cf2312734 Examples: some examples use new event register API
* getting started - station
* softap
* iperf
* fast scan
* Power save
2020-03-25 10:36:47 +08:00

109 lines
3.6 KiB
C

/* Power save Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
/*
this example shows how to use power save mode
set a router or a AP using the same SSID&PASSWORD as configuration of this example.
start esp32 and when it connected to AP it will enter power save mode
*/
#include "freertos/FreeRTOS.h"
#include "freertos/event_groups.h"
#include "esp_wifi.h"
#include "esp_log.h"
#include "esp_event.h"
#include "esp_pm.h"
#include "nvs_flash.h"
/*set the ssid and password via "idf.py menuconfig"*/
#define DEFAULT_SSID CONFIG_EXAMPLE_WIFI_SSID
#define DEFAULT_PWD CONFIG_EXAMPLE_WIFI_PASSWORD
#define DEFAULT_LISTEN_INTERVAL CONFIG_EXAMPLE_WIFI_LISTEN_INTERVAL
#if CONFIG_EXAMPLE_POWER_SAVE_MIN_MODEM
#define DEFAULT_PS_MODE WIFI_PS_MIN_MODEM
#elif CONFIG_EXAMPLE_POWER_SAVE_MAX_MODEM
#define DEFAULT_PS_MODE WIFI_PS_MAX_MODEM
#elif CONFIG_EXAMPLE_POWER_SAVE_NONE
#define DEFAULT_PS_MODE WIFI_PS_NONE
#else
#define DEFAULT_PS_MODE WIFI_PS_NONE
#endif /*CONFIG_POWER_SAVE_MODEM*/
static const char *TAG = "power_save";
static void event_handler(void* arg, esp_event_base_t event_base,
int32_t event_id, void* event_data)
{
if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_START) {
esp_wifi_connect();
} else if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_DISCONNECTED) {
esp_wifi_connect();
} else if (event_base == IP_EVENT && event_id == IP_EVENT_STA_GOT_IP) {
ip_event_got_ip_t* event = (ip_event_got_ip_t*) event_data;
ESP_LOGI(TAG, "got ip: " IPSTR, IP2STR(&event->ip_info.ip));
}
}
/*init wifi as sta and set power save mode*/
static void wifi_power_save(void)
{
ESP_ERROR_CHECK(esp_netif_init());
ESP_ERROR_CHECK(esp_event_loop_create_default());
esp_netif_t *sta_netif = esp_netif_create_default_wifi_sta();
assert(sta_netif);
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
ESP_ERROR_CHECK(esp_wifi_init(&cfg));
ESP_ERROR_CHECK(esp_event_handler_instance_register(WIFI_EVENT, ESP_EVENT_ANY_ID, &event_handler, NULL, NULL));
ESP_ERROR_CHECK(esp_event_handler_instance_register(IP_EVENT, IP_EVENT_STA_GOT_IP, &event_handler, NULL, NULL));
wifi_config_t wifi_config = {
.sta = {
.ssid = DEFAULT_SSID,
.password = DEFAULT_PWD,
.listen_interval = DEFAULT_LISTEN_INTERVAL,
},
};
ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA));
ESP_ERROR_CHECK(esp_wifi_set_config(ESP_IF_WIFI_STA, &wifi_config));
ESP_ERROR_CHECK(esp_wifi_start());
ESP_LOGI(TAG, "esp_wifi_set_ps().");
esp_wifi_set_ps(DEFAULT_PS_MODE);
}
void app_main(void)
{
// Initialize NVS
esp_err_t ret = nvs_flash_init();
if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) {
ESP_ERROR_CHECK(nvs_flash_erase());
ret = nvs_flash_init();
}
ESP_ERROR_CHECK( ret );
#if CONFIG_PM_ENABLE
// Configure dynamic frequency scaling:
// maximum and minimum frequencies are set in sdkconfig,
// automatic light sleep is enabled if tickless idle support is enabled.
esp_pm_config_esp32_t pm_config = {
.max_freq_mhz = CONFIG_EXAMPLE_MAX_CPU_FREQ_MHZ,
.min_freq_mhz = CONFIG_EXAMPLE_MIN_CPU_FREQ_MHZ,
#if CONFIG_FREERTOS_USE_TICKLESS_IDLE
.light_sleep_enable = true
#endif
};
ESP_ERROR_CHECK( esp_pm_configure(&pm_config) );
#endif // CONFIG_PM_ENABLE
wifi_power_save();
}