335 lines
17 KiB
ReStructuredText
335 lines
17 KiB
ReStructuredText
ESP-MESH Programming Guide
|
|
==========================
|
|
|
|
This is a programming guide for ESP-MESH, including the API reference and coding examples. This guide is split into the following parts:
|
|
|
|
1. :ref:`mesh-programming-model`
|
|
|
|
2. :ref:`mesh-writing-mesh-application`
|
|
|
|
3. :ref:`mesh-self-organized-behavior`
|
|
|
|
4. :ref:`mesh-application-examples`
|
|
|
|
5. :ref:`mesh-api-reference`
|
|
|
|
For documentation regarding the ESP-MESH protocol, please see the :doc:`ESP-MESH API Guide<../../api-guides/mesh>`.
|
|
|
|
|
|
.. ---------------------- ESP-MESH Programming Model --------------------------
|
|
|
|
.. _mesh-programming-model:
|
|
|
|
ESP-MESH Programming Model
|
|
--------------------------
|
|
|
|
Software Stack
|
|
^^^^^^^^^^^^^^
|
|
|
|
The ESP-MESH software stack is built atop the Wi-Fi Driver/FreeRTOS and may use the LwIP Stack in some instances (i.e. the root node). The following diagram illustrates the ESP-MESH software stack.
|
|
|
|
.. _mesh-going-to-software-stack:
|
|
|
|
.. figure:: ../../../_static/mesh-software-stack.png
|
|
:align: center
|
|
:alt: ESP-MESH Software Stack
|
|
:figclass: align-center
|
|
|
|
ESP-MESH Software Stack
|
|
|
|
System Events
|
|
^^^^^^^^^^^^^
|
|
|
|
An application interfaces with ESP-MESH via **ESP-MESH Events**. Since ESP-MESH is built atop the Wi-Fi stack, it is also possible for the application to interface with the Wi-Fi driver via the **Wi-Fi Event Task**. The following diagram illustrates the interfaces for the various System Events in an ESP-MESH application.
|
|
|
|
.. figure:: ../../../_static/mesh-events-delivery.png
|
|
:align: center
|
|
:alt: ESP-MESH System Events Delivery
|
|
:figclass: align-center
|
|
|
|
ESP-MESH System Events Delivery
|
|
|
|
The :cpp:type:`mesh_event_id_t` defines all possible ESP-MESH system events and can indicate events such as the connection/disconnection of parent/child. Before ESP-MESH system events can be used, the application must register a **Mesh Event Callback** via :cpp:func:`esp_mesh_set_config`. The callback is used to receive events from the ESP-MESH stack as well as the LwIP Stack and should contain handlers for each event relevant to the application.
|
|
|
|
Typical use cases of system events include using events such as :cpp:enumerator:`MESH_EVENT_PARENT_CONNECTED` and :cpp:enumerator:`MESH_EVENT_CHILD_CONNECTED` to indicate when a node can begin transmitting data upstream and downstream respectively. Likewise, :cpp:enumerator:`MESH_EVENT_ROOT_GOT_IP` and :cpp:enumerator:`MESH_EVENT_ROOT_LOST_IP` can be used to indicate when the root node can and cannot transmit data to the external IP network.
|
|
|
|
.. warning::
|
|
When using ESP-MESH under self-organized mode, users must ensure that no calls to Wi-Fi API are made. This is due to the fact that the self-organizing mode will internally make Wi-Fi API calls to connect/disconnect/scan etc. **Any Wi-Fi calls from the application (including calls from callbacks and handlers of Wi-Fi events) may interfere with ESP-MESH's self-organizing behavior**. Therefore, user's should not call Wi-Fi APIs after :cpp:func:`esp_mesh_start` is called, and before :cpp:func:`esp_mesh_stop` is called.
|
|
|
|
LwIP & ESP-MESH
|
|
^^^^^^^^^^^^^^^
|
|
|
|
The application can access the ESP-MESH stack directly without having to go through the LwIP stack. The LwIP stack is only required by the root node to transmit/receive data to/from an external IP network. However, since every node can potentially become the root node (due to automatic root node selection), each node must still initialize the LwIP stack.
|
|
|
|
**Each node is required to initialize LwIP by calling** :cpp:func:`tcpip_adapter_init`. In order to prevent non-root node access to LwIP, the application should stop the following services after LwIP initialization:
|
|
|
|
- DHCP server service on the softAP interface.
|
|
- DHCP client service on the station interface.
|
|
|
|
The following code snippet demonstrates how to initialize LwIP for ESP-MESH applications.
|
|
|
|
.. code-block:: c
|
|
|
|
/* tcpip initialization */
|
|
tcpip_adapter_init();
|
|
/*
|
|
* for mesh
|
|
* stop DHCP server on softAP interface by default
|
|
* stop DHCP client on station interface by default
|
|
*/
|
|
ESP_ERROR_CHECK(tcpip_adapter_dhcps_stop(TCPIP_ADAPTER_IF_AP));
|
|
ESP_ERROR_CHECK(tcpip_adapter_dhcpc_stop(TCPIP_ADAPTER_IF_STA));
|
|
/* do not specify system event callback, use NULL instead. */
|
|
ESP_ERROR_CHECK(esp_event_loop_init(NULL, NULL));
|
|
|
|
.. note::
|
|
|
|
ESP-MESH requires a root node to be connected with a router. Therefore, in the event that a node becomes the root, **the corresponding handler must start the DHCP client service and immediately obtain an IP address**. Doing so will allow other nodes to begin transmitting/receiving packets to/from the external IP network. However, this step is unnecessary if static IP settings are used.
|
|
|
|
|
|
.. ---------------------- Writing a Mesh Application --------------------------
|
|
|
|
.. _mesh-writing-mesh-application:
|
|
|
|
Writing an ESP-MESH Application
|
|
-------------------------------
|
|
|
|
The prerequisites for starting ESP-MESH is to initialize LwIP and Wi-Fi, The following code snippet demonstrates the necessary prerequisite steps before ESP-MESH itself can be initialized.
|
|
|
|
.. code-block:: c
|
|
|
|
tcpip_adapter_init();
|
|
/*
|
|
* for mesh
|
|
* stop DHCP server on softAP interface by default
|
|
* stop DHCP client on station interface by default
|
|
*/
|
|
ESP_ERROR_CHECK(tcpip_adapter_dhcps_stop(TCPIP_ADAPTER_IF_AP));
|
|
ESP_ERROR_CHECK(tcpip_adapter_dhcpc_stop(TCPIP_ADAPTER_IF_STA));
|
|
/* do not specify system event callback, use NULL instead. */
|
|
ESP_ERROR_CHECK(esp_event_loop_init(NULL, NULL));
|
|
|
|
/* Wi-Fi initialization */
|
|
wifi_init_config_t config = WIFI_INIT_CONFIG_DEFAULT();
|
|
ESP_ERROR_CHECK(esp_wifi_init(&config));
|
|
ESP_ERROR_CHECK(esp_wifi_set_storage(WIFI_STORAGE_FLASH));
|
|
ESP_ERROR_CHECK(esp_wifi_start());
|
|
|
|
After initializing LwIP and Wi-Fi, the process of getting an ESP-MESH network up and running can be summarized into the following three steps:
|
|
|
|
1. :ref:`mesh-initialize-mesh`
|
|
2. :ref:`mesh-configuring-mesh`
|
|
3. :ref:`mesh-start-mesh`
|
|
|
|
.. _mesh-initialize-mesh:
|
|
|
|
Initialize Mesh
|
|
^^^^^^^^^^^^^^^
|
|
|
|
The following code snippet demonstrates how to initialize ESP-MESH
|
|
|
|
.. code-block:: c
|
|
|
|
/* mesh initialization */
|
|
ESP_ERROR_CHECK(esp_mesh_init());
|
|
|
|
.. _mesh-configuring-mesh:
|
|
|
|
Configuring an ESP-MESH Network
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
.. todo - Add note about unified configuration
|
|
|
|
ESP-MESH is configured via :cpp:func:`esp_mesh_set_config` which receives its arguments using the :cpp:type:`mesh_cfg_t` structure. The structure contains the following parameters used to configure ESP-MESH:
|
|
|
|
+------------------+-------------------------------------+
|
|
| Parameter | Description |
|
|
+==================+=====================================+
|
|
| Channel | Range from 1 to 14 |
|
|
+------------------+-------------------------------------+
|
|
| Event Callback | Callback for Mesh Events, |
|
|
| | see :cpp:type:`mesh_event_cb_t` |
|
|
+------------------+-------------------------------------+
|
|
| Mesh ID | ID of ESP-MESH Network, |
|
|
| | see :cpp:type:`mesh_addr_t` |
|
|
+------------------+-------------------------------------+
|
|
| Router | Router Configuration, |
|
|
| | see :cpp:type:`mesh_router_t` |
|
|
+------------------+-------------------------------------+
|
|
| Mesh AP | Mesh AP Configuration, |
|
|
| | see :cpp:type:`mesh_ap_cfg_t` |
|
|
+------------------+-------------------------------------+
|
|
| Crypto Functions | Crypto Functions for Mesh IE, |
|
|
| | see :cpp:type:`mesh_crypto_funcs_t` |
|
|
+------------------+-------------------------------------+
|
|
|
|
The following code snippet demonstrates how to configure ESP-MESH.
|
|
|
|
.. code-block:: c
|
|
|
|
/* Enable the Mesh IE encryption by default */
|
|
mesh_cfg_t cfg = MESH_INIT_CONFIG_DEFAULT();
|
|
/* mesh ID */
|
|
memcpy((uint8_t *) &cfg.mesh_id, MESH_ID, 6);
|
|
/* mesh event callback */
|
|
cfg.event_cb = &mesh_event_handler;
|
|
/* channel (must match the router's channel) */
|
|
cfg.channel = CONFIG_MESH_CHANNEL;
|
|
/* router */
|
|
cfg.router.ssid_len = strlen(CONFIG_MESH_ROUTER_SSID);
|
|
memcpy((uint8_t *) &cfg.router.ssid, CONFIG_MESH_ROUTER_SSID, cfg.router.ssid_len);
|
|
memcpy((uint8_t *) &cfg.router.password, CONFIG_MESH_ROUTER_PASSWD,
|
|
strlen(CONFIG_MESH_ROUTER_PASSWD));
|
|
/* mesh softAP */
|
|
cfg.mesh_ap.max_connection = CONFIG_MESH_AP_CONNECTIONS;
|
|
memcpy((uint8_t *) &cfg.mesh_ap.password, CONFIG_MESH_AP_PASSWD,
|
|
strlen(CONFIG_MESH_AP_PASSWD));
|
|
ESP_ERROR_CHECK(esp_mesh_set_config(&cfg));
|
|
|
|
.. _mesh-start-mesh:
|
|
|
|
Start Mesh
|
|
^^^^^^^^^^
|
|
|
|
The following code snippet demonstrates how to start ESP-MESH.
|
|
|
|
.. code-block:: c
|
|
|
|
/* mesh start */
|
|
ESP_ERROR_CHECK(esp_mesh_start());
|
|
|
|
After starting ESP-MESH, the application should check for ESP-MESH events to determine when it has connected to the network. After connecting, the application can start transmitting and receiving packets over the ESP-MESH network using :cpp:func:`esp_mesh_send` and :cpp:func:`esp_mesh_recv`.
|
|
|
|
|
|
.. --------------------- ESP-MESH Application Examples ------------------------
|
|
|
|
.. _mesh-self-organized-behavior:
|
|
|
|
Self Organized Networking
|
|
-------------------------
|
|
|
|
Self organized networking is a feature of ESP-MESH where nodes can autonomously scan/select/connect/reconnect to other nodes and routers. This feature allows an ESP-MESH network to operate with high degree of autonomy by making the network robust to dynamic network topologies and conditions. With self organized networking enabled, nodes in an ESP-MESH network are able to carryout the following actions without autonomously:
|
|
|
|
- Selection or election of the root node (see **Automatic Root Node Selection** in :ref:`mesh-building-a-network`)
|
|
- Selection of a preferred parent node (see **Parent Node Selection** in :ref:`mesh-building-a-network`)
|
|
- Automatic reconnection upon detecting a disconnection (see **Intermediate Parent Node Failure** in :ref:`mesh-managing-a-network`)
|
|
|
|
When self organized networking is enabled, the ESP-MESH stack will internally make calls to Wi-Fi driver APIs. Therefore, **the application layer should not make any calls to Wi-Fi driver APIs whilst self organized networking is enabled as doing so would risk interfering with ESP-MESH**.
|
|
|
|
Toggling Self Organized Networking
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Self organized networking can be enabled or disabled by the application at runtime by calling the :cpp:func:`esp_mesh_set_self_organized` function. The function has the two following parameters:
|
|
|
|
- ``bool enable`` specifies whether to enable or disable self organized networking.
|
|
|
|
- ``bool select_parent`` specifies whether a new parent node should be selected when enabling self organized networking. Selecting a new parent has different effects depending the node type and the node's current state. This parameter is unused when disabling self organized networking.
|
|
|
|
Disabling Self Organized Networking
|
|
"""""""""""""""""""""""""""""""""""
|
|
The following code snippet demonstrates how to disable self organized networking.
|
|
|
|
.. code-block:: c
|
|
|
|
//Disable self organized networking
|
|
esp_mesh_set_self_organized(false, false);
|
|
|
|
ESP-MESH will attempt to maintain the node's current Wi-Fi state when disabling self organized networking.
|
|
|
|
- If the node was previously connected to other nodes, it will remain connected.
|
|
- If the node was previously disconnected and was scanning for a parent node or router, it will stop scanning.
|
|
- If the node was previously attempting to reconnect to a parent node or router, it will stop reconnecting.
|
|
|
|
Enabling Self Organized Networking
|
|
""""""""""""""""""""""""""""""""""
|
|
|
|
ESP-MESH will attempt to maintain the node's current Wi-Fi state when enabling self organized networking. However, depending on the node type and whether a new parent is selected, the Wi-Fi state of the node can change. The following table shows effects of enabling self organized networking.
|
|
|
|
+---------------+--------------+------------------------------------------------------------------------------------------------------------------+
|
|
| Select Parent | Is Root Node | Effects |
|
|
+===============+==============+==================================================================================================================+
|
|
| N | N | - Nodes already connected to a parent node will remain connected. |
|
|
| | | - Nodes previously scanning for a parent nodes will stop scanning. Call :cpp:func:`esp_mesh_connect` to restart. |
|
|
| +--------------+------------------------------------------------------------------------------------------------------------------+
|
|
| | Y | - A root node already connected to router will stay connected. |
|
|
| | | - A root node disconnected from router will need to call :cpp:func:`esp_mesh_connect` to reconnect. |
|
|
+---------------+--------------+------------------------------------------------------------------------------------------------------------------+
|
|
| Y | N | - Nodes without a parent node will automatically select a preferred parent and connect. |
|
|
| | | - Nodes already connected to a parent node will disconnect, reselect a preferred parent node, and connect. |
|
|
| +--------------+------------------------------------------------------------------------------------------------------------------+
|
|
| | Y | - For a root node to connect to a parent node, it must give up it's role as root. Therefore, a root node will |
|
|
| | | disconnect from the router and all child nodes, select a preferred parent node, and connect. |
|
|
+---------------+--------------+------------------------------------------------------------------------------------------------------------------+
|
|
|
|
The following code snipping demonstrates how to enable self organized networking.
|
|
|
|
.. code-block:: c
|
|
|
|
//Enable self organized networking and select a new parent
|
|
esp_mesh_set_self_organized(true, true);
|
|
|
|
...
|
|
|
|
//Enable self organized networking and manually reconnect
|
|
esp_mesh_set_self_organized(true, false);
|
|
esp_mesh_connect();
|
|
|
|
|
|
Calling Wi-Fi Driver API
|
|
^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
There can be instances in which an application may want to directly call Wi-Fi driver API whilst using ESP-MESH. For example, an application may want to manually scan for neighboring APs. However, **self organized networking must be disabled before the application calls any Wi-Fi driver APIs**. This will prevent the ESP-MESH stack from attempting to call any Wi-Fi driver APIs and potentially interfering with the application's calls.
|
|
|
|
Therefore, application calls to Wi-Fi driver APIs should be placed in between calls of :cpp:func:`esp_mesh_set_self_organized` which disable and enable self organized networking. The following code snippet demonstrates how an application can safely call :cpp:func:`esp_wifi_scan_start` whilst using ESP-MESH.
|
|
|
|
.. code-block:: c
|
|
|
|
//Disable self organized networking
|
|
esp_mesh_set_self_organized(0, 0);
|
|
|
|
//Stop any scans already in progress
|
|
esp_wifi_scan_stop();
|
|
//Manually start scan. Will automatically stop when run to completion
|
|
esp_wifi_scan_start();
|
|
|
|
//Process scan results
|
|
|
|
...
|
|
|
|
//Re-enable self organized networking if still connected
|
|
esp_mesh_set_self_organized(1, 0);
|
|
|
|
...
|
|
|
|
//Re-enable self organized networking if non-root and disconnected
|
|
esp_mesh_set_self_organized(1, 1);
|
|
|
|
...
|
|
|
|
//Re-enable self organized networking if root and disconnected
|
|
esp_mesh_set_self_organized(1, 0); //Don't select new parent
|
|
esp_mesh_connect(); //Manually reconnect to router
|
|
|
|
|
|
.. --------------------- ESP-MESH Application Examples ------------------------
|
|
|
|
.. _mesh-application-examples:
|
|
|
|
Application Examples
|
|
--------------------
|
|
|
|
ESP-IDF contains these ESP-MESH example projects:
|
|
|
|
:example:`The Internal Communication Example<mesh/internal_communication>` demonstrates how to setup a ESP-MESH network and have the root node send a data packet to every node within the network.
|
|
|
|
:example:`The Manual Networking Example<mesh/manual_networking>` demonstrates how to use ESP-MESH without the self-organizing features. This example shows how to program a node to manually scan for a list of potential parent nodes and select a parent node based on custom criteria.
|
|
|
|
|
|
.. ------------------------- ESP-MESH API Reference ---------------------------
|
|
|
|
.. _mesh-api-reference:
|
|
|
|
API Reference
|
|
--------------
|
|
|
|
.. include:: /_build/inc/esp_mesh.inc
|