OVMS3-idf/components/spi_flash/esp_flash_spi_init.c
Michael (XIAO Xufeng) d3b54ec84a esp_flash: fix the coredump issue
During coredump, dangerous-area-checking should be disabled, and cache
disabling should be replaced by a safer version.

Dangerous-area-checking used to be in the HAL, but it seems to be more
fit to os functions. So it's moved to os functions. Interfaces are
provided to switch between os functions during coredump.
2019-09-18 14:30:23 +08:00

214 lines
7.2 KiB
C

// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "sdkconfig.h"
#include "esp_flash.h"
#include "memspi_host_driver.h"
#include "esp_flash_spi_init.h"
#include "driver/gpio.h"
#include "esp32/rom/spi_flash.h"
#include "esp_log.h"
#include "esp_heap_caps.h"
#include "hal/spi_types.h"
#include "driver/spi_common.h"
#include "esp_flash_internal.h"
__attribute__((unused)) static const char TAG[] = "spi_flash";
#ifdef CONFIG_ESPTOOLPY_FLASHFREQ_80M
#define DEFAULT_FLASH_SPEED ESP_FLASH_80MHZ
#elif defined CONFIG_ESPTOOLPY_FLASHFREQ_40M
#define DEFAULT_FLASH_SPEED ESP_FLASH_40MHZ
#elif defined CONFIG_ESPTOOLPY_FLASHFREQ_26M
#define DEFAULT_FLASH_SPEED ESP_FLASH_26MHZ
#elif defined CONFIG_ESPTOOLPY_FLASHFREQ_20M
#define DEFAULT_FLASH_SPEED ESP_FLASH_20MHZ
#else
#error Flash frequency not defined! Check the ``CONFIG_ESPTOOLPY_FLASHFREQ_*`` options.
#endif
#if defined(CONFIG_ESPTOOLPY_FLASHMODE_QIO)
#define DEFAULT_FLASH_MODE SPI_FLASH_QIO
#elif defined(CONFIG_ESPTOOLPY_FLASHMODE_QOUT)
#define DEFAULT_FLASH_MODE SPI_FLASH_QOUT
#elif defined(CONFIG_ESPTOOLPY_FLASHMODE_DIO)
#define DEFAULT_FLASH_MODE SPI_FLASH_DIO
#elif defined(CONFIG_ESPTOOLPY_FLASHMODE_DOUT)
#define DEFAULT_FLASH_MODE SPI_FLASH_DOUT
#else
#define DEFAULT_FLASH_MODE SPI_FLASH_FASTRD
#endif
#define ESP_FLASH_HOST_CONFIG_DEFAULT() (memspi_host_config_t){ \
.host_id = SPI_HOST,\
.speed = DEFAULT_FLASH_SPEED, \
.cs_num = 0, \
.iomux = false, \
.input_delay_ns = 0,\
}
esp_flash_t *esp_flash_default_chip = NULL;
static IRAM_ATTR void cs_initialize(esp_flash_t *chip, const esp_flash_spi_device_config_t *config, bool use_iomux)
{
//Not using spicommon_cs_initialize since we don't want to put the whole
//spi_periph_signal into the DRAM. Copy these data from flash before the
//cache disabling
int cs_io_num = config->cs_io_num;
int spics_in = spi_periph_signal[config->host_id].spics_in;
int spics_out = spi_periph_signal[config->host_id].spics_out[config->cs_id];
uint32_t iomux_reg = GPIO_PIN_MUX_REG[cs_io_num];
//To avoid the panic caused by flash data line conflicts during cs line
//initialization, disable the cache temporarily
chip->os_func->start(chip->os_func_data);
if (use_iomux) {
GPIO.func_in_sel_cfg[spics_in].sig_in_sel = 0;
PIN_INPUT_ENABLE(iomux_reg);
GPIO.func_out_sel_cfg[spics_out].oen_sel = 0;
GPIO.func_out_sel_cfg[spics_out].oen_inv_sel = false;
PIN_FUNC_SELECT(iomux_reg, 1);
} else {
PIN_INPUT_ENABLE(iomux_reg);
if (cs_io_num < 32) {
GPIO.enable_w1ts = (0x1 << cs_io_num);
} else {
GPIO.enable1_w1ts.data = (0x1 << (cs_io_num - 32));
}
GPIO.pin[cs_io_num].pad_driver = 0;
gpio_matrix_out(cs_io_num, spics_out, false, false);
if (config->cs_id == 0) {
gpio_matrix_in(cs_io_num, spics_in, false);
}
PIN_FUNC_SELECT(iomux_reg, PIN_FUNC_GPIO);
}
chip->os_func->end(chip->os_func_data);
}
esp_err_t spi_bus_add_flash_device(esp_flash_t **out_chip, const esp_flash_spi_device_config_t *config)
{
if (out_chip == NULL) {
return ESP_ERR_INVALID_ARG;
}
esp_flash_t *chip = NULL;
spi_flash_host_driver_t *host = NULL;
memspi_host_data_t *host_data = NULL;
esp_err_t ret = ESP_OK;
uint32_t caps = MALLOC_CAP_DEFAULT;
if (config->host_id == SPI_HOST) caps = MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT;
chip = (esp_flash_t*)heap_caps_malloc(sizeof(esp_flash_t), caps);
host = (spi_flash_host_driver_t*)heap_caps_malloc(sizeof(spi_flash_host_driver_t), caps);
host_data = (memspi_host_data_t*)heap_caps_malloc(sizeof(memspi_host_data_t), caps);
if (!chip || !host || !host_data) {
ret = ESP_ERR_NO_MEM;
goto fail;
}
*chip = (esp_flash_t) {
.read_mode = config->io_mode,
.host = host,
};
esp_err_t err = esp_flash_init_os_functions(chip, config->host_id);
if (err != ESP_OK) {
ret = err;
goto fail;
}
bool use_iomux = spicommon_bus_using_iomux(config->host_id);
memspi_host_config_t host_cfg = {
.host_id = config->host_id,
.cs_num = config->cs_id,
.iomux = use_iomux,
.input_delay_ns = config->input_delay_ns,
.speed = config->speed,
};
err = memspi_host_init_pointers(host, host_data, &host_cfg);
if (err != ESP_OK) {
ret = err;
goto fail;
}
cs_initialize(chip, config, use_iomux);
*out_chip = chip;
return ret;
fail:
spi_bus_remove_flash_device(chip);
return ret;
}
esp_err_t spi_bus_remove_flash_device(esp_flash_t *chip)
{
if (chip==NULL) {
return ESP_ERR_INVALID_ARG;
}
if (chip->host) {
free(chip->host->driver_data);
free(chip->host);
}
free(chip);
return ESP_OK;
}
/* The default (ie initial boot) no-OS ROM esp_flash_os_functions_t */
extern const esp_flash_os_functions_t esp_flash_noos_functions;
#ifndef CONFIG_SPI_FLASH_USE_LEGACY_IMPL
static DRAM_ATTR memspi_host_data_t default_driver_data;
static DRAM_ATTR spi_flash_host_driver_t esp_flash_default_host_drv = ESP_FLASH_DEFAULT_HOST_DRIVER();
static DRAM_ATTR esp_flash_t default_chip = {
.read_mode = DEFAULT_FLASH_MODE,
.host = &esp_flash_default_host_drv,
.os_func = &esp_flash_noos_functions,
};
esp_err_t esp_flash_init_default_chip()
{
memspi_host_config_t cfg = ESP_FLASH_HOST_CONFIG_DEFAULT();
//the host is already initialized, only do init for the data and load it to the host
spi_flash_hal_init(&default_driver_data, &cfg);
default_chip.host->driver_data = &default_driver_data;
// ROM TODO: account for non-standard default pins in efuse
// ROM TODO: to account for chips which are slow to power on, maybe keep probing in a loop here
esp_err_t err = esp_flash_init(&default_chip);
if (err != ESP_OK) {
return err;
}
if (default_chip.size < g_rom_flashchip.chip_size) {
ESP_EARLY_LOGE(TAG, "Detected size(%dk) smaller than the size in the binary image header(%dk). Probe failed.", default_chip.size/1024, g_rom_flashchip.chip_size/1024);
return ESP_ERR_FLASH_SIZE_NOT_MATCH;
} else if (default_chip.size > g_rom_flashchip.chip_size) {
ESP_EARLY_LOGW(TAG, "Detected size(%dk) larger than the size in the binary image header(%dk). Using the size in the binary image header.", default_chip.size/1024, g_rom_flashchip.chip_size/1024);
default_chip.size = g_rom_flashchip.chip_size;
}
default_chip.size = g_rom_flashchip.chip_size;
esp_flash_default_chip = &default_chip;
return ESP_OK;
}
esp_err_t esp_flash_app_init()
{
return esp_flash_app_init_os_functions(&default_chip);
}
#endif