Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
OVMS3-idf/components/driver/twai.c
Darian Leung 21e2f02962 TWAI: Remove asserts used for program logic 
This commit fixes the bug where TWAI driver program logic was being
called in assert(), thus leading to the logic being omitted in
release builds.
2020-07-30 22:17:41 +08:00

698 lines
26 KiB
C
Raw Blame History

// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "soc/soc_caps.h"
#include "sdkconfig.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "freertos/semphr.h"
#include "esp_types.h"
#include "esp_log.h"
#include "esp_intr_alloc.h"
#include "esp_pm.h"
#include "driver/gpio.h"
#include "driver/periph_ctrl.h"
#include "driver/twai.h"
#include "soc/twai_periph.h"
#include "hal/twai_hal.h"
/* ---------------------------- Definitions --------------------------------- */
//Internal Macros
#define TWAI_CHECK(cond, ret_val) ({ \
if (!(cond)) { \
return (ret_val); \
} \
})
#define TWAI_CHECK_FROM_CRIT(cond, ret_val) ({ \
if (!(cond)) { \
TWAI_EXIT_CRITICAL(); \
return ret_val; \
} \
})
#define TWAI_SET_FLAG(var, mask) ((var) |= (mask))
#define TWAI_RESET_FLAG(var, mask) ((var) &= ~(mask))
#define TWAI_TAG "TWAI"
#define DRIVER_DEFAULT_INTERRUPTS 0xE7 //Exclude data overrun (bit[3]) and brp_div (bit[4])
//Control flags
#define CTRL_FLAG_STOPPED 0x001 //TWAI peripheral in stopped state
#define CTRL_FLAG_RECOVERING 0x002 //Bus is undergoing bus recovery
#define CTRL_FLAG_ERR_WARN 0x004 //TEC or REC is >= error warning limit
#define CTRL_FLAG_ERR_PASSIVE 0x008 //TEC or REC is >= 128
#define CTRL_FLAG_BUS_OFF 0x010 //Bus-off due to TEC >= 256
#define CTRL_FLAG_TX_BUFF_OCCUPIED 0x020 //Transmit buffer is occupied
#define ALERT_LOG_LEVEL_WARNING TWAI_ALERT_ARB_LOST //Alerts above and including this level use ESP_LOGW
#define ALERT_LOG_LEVEL_ERROR TWAI_ALERT_TX_FAILED //Alerts above and including this level use ESP_LOGE
/* ------------------ Typedefs, structures, and variables ------------------- */
//Control structure for TWAI driver
typedef struct {
//Control and status members
uint32_t control_flags;
twai_mode_t mode;
uint32_t rx_missed_count;
uint32_t tx_failed_count;
uint32_t arb_lost_count;
uint32_t bus_error_count;
intr_handle_t isr_handle;
//TX and RX
QueueHandle_t tx_queue;
QueueHandle_t rx_queue;
int tx_msg_count;
int rx_msg_count;
//Alerts
SemaphoreHandle_t alert_semphr;
uint32_t alerts_enabled;
uint32_t alerts_triggered;
#ifdef CONFIG_PM_ENABLE
//Power Management
esp_pm_lock_handle_t pm_lock;
#endif
} twai_obj_t;
static twai_obj_t *p_twai_obj = NULL;
static portMUX_TYPE twai_spinlock = portMUX_INITIALIZER_UNLOCKED;
#define TWAI_ENTER_CRITICAL_ISR() portENTER_CRITICAL_ISR(&twai_spinlock)
#define TWAI_EXIT_CRITICAL_ISR() portEXIT_CRITICAL_ISR(&twai_spinlock)
#define TWAI_ENTER_CRITICAL() portENTER_CRITICAL(&twai_spinlock)
#define TWAI_EXIT_CRITICAL() portEXIT_CRITICAL(&twai_spinlock)
static twai_hal_context_t twai_context;
/* -------------------- Interrupt and Alert Handlers ------------------------ */
static void twai_alert_handler(uint32_t alert_code, int *alert_req)
{
if (p_twai_obj->alerts_enabled & alert_code) {
//Signify alert has occurred
TWAI_SET_FLAG(p_twai_obj->alerts_triggered, alert_code);
*alert_req = 1;
if (p_twai_obj->alerts_enabled & TWAI_ALERT_AND_LOG) {
if (alert_code >= ALERT_LOG_LEVEL_ERROR) {
ESP_EARLY_LOGE(TWAI_TAG, "Alert %d", alert_code);
} else if (alert_code >= ALERT_LOG_LEVEL_WARNING) {
ESP_EARLY_LOGW(TWAI_TAG, "Alert %d", alert_code);
} else {
ESP_EARLY_LOGI(TWAI_TAG, "Alert %d", alert_code);
}
}
}
}
static inline void twai_handle_bus_off(int *alert_req)
{
//Bus-Off condition. TEC should set and held at 127, REC should be 0, reset mode entered
TWAI_SET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_BUS_OFF);
/* Note: REC is still allowed to increase during bus-off. REC > err_warn
can prevent "bus recovery complete" interrupt from occurring. Set to
listen only mode to freeze REC. */
twai_hal_handle_bus_off(&twai_context);
twai_alert_handler(TWAI_ALERT_BUS_OFF, alert_req);
}
static inline void twai_handle_recovery_complete(int *alert_req)
{
//Bus recovery complete.
bool recov_cplt = twai_hal_handle_bus_recov_cplt(&twai_context);
assert(recov_cplt);
//Reset and set flags to the equivalent of the stopped state
TWAI_RESET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_RECOVERING | CTRL_FLAG_ERR_WARN |
CTRL_FLAG_ERR_PASSIVE | CTRL_FLAG_BUS_OFF |
CTRL_FLAG_TX_BUFF_OCCUPIED);
TWAI_SET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_STOPPED);
twai_alert_handler(TWAI_ALERT_BUS_RECOVERED, alert_req);
}
static inline void twai_handle_recovery_in_progress(int * alert_req)
{
//Bus-recovery in progress. TEC has dropped below error warning limit
twai_alert_handler(TWAI_ALERT_RECOVERY_IN_PROGRESS, alert_req);
}
static inline void twai_handle_above_ewl(int *alert_req)
{
//TEC or REC surpassed error warning limit
TWAI_SET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_ERR_WARN);
twai_alert_handler(TWAI_ALERT_ABOVE_ERR_WARN, alert_req);
}
static inline void twai_handle_below_ewl(int *alert_req)
{
//TEC and REC are both below error warning
TWAI_RESET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_ERR_WARN);
twai_alert_handler(TWAI_ALERT_BELOW_ERR_WARN, alert_req);
}
static inline void twai_handle_error_passive(int *alert_req)
{
//Entered error passive
TWAI_SET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_ERR_PASSIVE);
twai_alert_handler(TWAI_ALERT_ERR_PASS, alert_req);
}
static inline void twai_handle_error_active(int *alert_req)
{
//Returned to error active
TWAI_RESET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_ERR_PASSIVE);
twai_alert_handler(TWAI_ALERT_ERR_ACTIVE, alert_req);
}
static inline void twai_handle_bus_error(int *alert_req)
{
// ECC register is read to re-arm bus error interrupt. ECC is not used
twai_hal_handle_bus_error(&twai_context);
p_twai_obj->bus_error_count++;
twai_alert_handler(TWAI_ALERT_BUS_ERROR, alert_req);
}
static inline void twai_handle_arb_lost(int *alert_req)
{
//ALC register is read to re-arm arb lost interrupt. ALC is not used
twai_hal_handle_arb_lost(&twai_context);
p_twai_obj->arb_lost_count++;
twai_alert_handler(TWAI_ALERT_ARB_LOST, alert_req);
}
static inline void twai_handle_rx_buffer_frames(BaseType_t *task_woken, int *alert_req)
{
uint32_t msg_count = twai_hal_get_rx_msg_count(&twai_context);
for (int i = 0; i < msg_count; i++) {
twai_hal_frame_t frame;
twai_hal_read_rx_buffer_and_clear(&twai_context, &frame);
//Copy frame into RX Queue
if (xQueueSendFromISR(p_twai_obj->rx_queue, &frame, task_woken) == pdTRUE) {
p_twai_obj->rx_msg_count++;
} else {
p_twai_obj->rx_missed_count++;
twai_alert_handler(TWAI_ALERT_RX_QUEUE_FULL, alert_req);
}
}
//Todo: Add Software Filters
//Todo: Check for data overrun of RX FIFO, then trigger alert
}
static inline void twai_handle_tx_buffer_frame(BaseType_t *task_woken, int *alert_req)
{
//Handle previously transmitted frame
if (twai_hal_check_last_tx_successful(&twai_context)) {
twai_alert_handler(TWAI_ALERT_TX_SUCCESS, alert_req);
} else {
p_twai_obj->tx_failed_count++;
twai_alert_handler(TWAI_ALERT_TX_FAILED, alert_req);
}
//Update TX message count
p_twai_obj->tx_msg_count--;
assert(p_twai_obj->tx_msg_count >= 0); //Sanity check
//Check if there are more frames to transmit
if (p_twai_obj->tx_msg_count > 0 && p_twai_obj->tx_queue != NULL) {
twai_hal_frame_t frame;
int res = xQueueReceiveFromISR(p_twai_obj->tx_queue, &frame, task_woken);
if (res == pdTRUE) {
twai_hal_set_tx_buffer_and_transmit(&twai_context, &frame);
} else {
assert(false && "failed to get a frame from TX queue");
}
} else {
//No more frames to transmit
TWAI_RESET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_TX_BUFF_OCCUPIED);
twai_alert_handler(TWAI_ALERT_TX_IDLE, alert_req);
}
}
static void twai_intr_handler_main(void *arg)
{
BaseType_t task_woken = pdFALSE;
int alert_req = 0;
uint32_t event;
TWAI_ENTER_CRITICAL_ISR();
if (p_twai_obj == NULL) { //Incase intr occurs whilst driver is being uninstalled
TWAI_EXIT_CRITICAL_ISR();
return;
}
event = twai_hal_decode_interrupt_events(&twai_context, p_twai_obj->control_flags & CTRL_FLAG_RECOVERING);
if (event & TWAI_HAL_EVENT_BUS_OFF) {
twai_handle_bus_off(&alert_req);
}
if (event & TWAI_HAL_EVENT_BUS_RECOV_CPLT) {
twai_handle_recovery_complete(&alert_req);
}
if (event & TWAI_HAL_EVENT_BUS_RECOV_PROGRESS) {
twai_handle_recovery_in_progress(&alert_req);
}
if (event & TWAI_HAL_EVENT_ABOVE_EWL) {
twai_handle_above_ewl(&alert_req);
}
if (event & TWAI_HAL_EVENT_BELOW_EWL) {
twai_handle_below_ewl(&alert_req);
}
if (event & TWAI_HAL_EVENT_ERROR_PASSIVE) {
twai_handle_error_passive(&alert_req);
}
if (event & TWAI_HAL_EVENT_ERROR_ACTIVE) {
twai_handle_error_active(&alert_req);
}
if (event & TWAI_HAL_EVENT_BUS_ERR) {
twai_handle_bus_error(&alert_req);
}
if (event & TWAI_HAL_EVENT_ARB_LOST) {
twai_handle_arb_lost(&alert_req);
}
if (event & TWAI_HAL_EVENT_RX_BUFF_FRAME) {
twai_handle_rx_buffer_frames(&task_woken, &alert_req);
}
//TX command related handlers should be called last, so that other commands
//do not overwrite the TX command related bits in the command register.
if (event & TWAI_HAL_EVENT_TX_BUFF_FREE) {
twai_handle_tx_buffer_frame(&task_woken, &alert_req);
}
TWAI_EXIT_CRITICAL_ISR();
if (p_twai_obj->alert_semphr != NULL && alert_req) {
//Give semaphore if alerts were triggered
xSemaphoreGiveFromISR(p_twai_obj->alert_semphr, &task_woken);
}
if (task_woken == pdTRUE) {
portYIELD_FROM_ISR();
}
}
/* --------------------------- GPIO functions ------------------------------ */
static void twai_configure_gpio(gpio_num_t tx, gpio_num_t rx, gpio_num_t clkout, gpio_num_t bus_status)
{
//Set TX pin
gpio_set_pull_mode(tx, GPIO_FLOATING);
gpio_matrix_out(tx, TWAI_TX_IDX, false, false);
gpio_pad_select_gpio(tx);
//Set RX pin
gpio_set_pull_mode(rx, GPIO_FLOATING);
gpio_matrix_in(rx, TWAI_RX_IDX, false);
gpio_pad_select_gpio(rx);
gpio_set_direction(rx, GPIO_MODE_INPUT);
//Configure output clock pin (Optional)
if (clkout >= 0 && clkout < GPIO_NUM_MAX) {
gpio_set_pull_mode(clkout, GPIO_FLOATING);
gpio_matrix_out(clkout, TWAI_CLKOUT_IDX, false, false);
gpio_pad_select_gpio(clkout);
}
//Configure bus status pin (Optional)
if (bus_status >= 0 && bus_status < GPIO_NUM_MAX) {
gpio_set_pull_mode(bus_status, GPIO_FLOATING);
gpio_matrix_out(bus_status, TWAI_BUS_OFF_ON_IDX, false, false);
gpio_pad_select_gpio(bus_status);
}
}
/* ---------------------------- Public Functions ---------------------------- */
esp_err_t twai_driver_install(const twai_general_config_t *g_config, const twai_timing_config_t *t_config, const twai_filter_config_t *f_config)
{
//Check arguments
TWAI_CHECK(g_config != NULL, ESP_ERR_INVALID_ARG);
TWAI_CHECK(t_config != NULL, ESP_ERR_INVALID_ARG);
TWAI_CHECK(f_config != NULL, ESP_ERR_INVALID_ARG);
TWAI_CHECK(g_config->rx_queue_len > 0, ESP_ERR_INVALID_ARG);
TWAI_CHECK(g_config->tx_io >= 0 && g_config->tx_io < GPIO_NUM_MAX, ESP_ERR_INVALID_ARG);
TWAI_CHECK(g_config->rx_io >= 0 && g_config->rx_io < GPIO_NUM_MAX, ESP_ERR_INVALID_ARG);
TWAI_CHECK(TWAI_BRP_IS_VALID(t_config->brp), ESP_ERR_INVALID_ARG);
esp_err_t ret;
twai_obj_t *p_twai_obj_dummy;
//Create a TWAI object
p_twai_obj_dummy = calloc(1, sizeof(twai_obj_t));
TWAI_CHECK(p_twai_obj_dummy != NULL, ESP_ERR_NO_MEM);
//Initialize queues, semaphores, and power management locks
p_twai_obj_dummy->tx_queue = (g_config->tx_queue_len > 0) ? xQueueCreate(g_config->tx_queue_len, sizeof(twai_hal_frame_t)) : NULL;
p_twai_obj_dummy->rx_queue = xQueueCreate(g_config->rx_queue_len, sizeof(twai_hal_frame_t));
p_twai_obj_dummy->alert_semphr = xSemaphoreCreateBinary();
if ((g_config->tx_queue_len > 0 && p_twai_obj_dummy->tx_queue == NULL) ||
p_twai_obj_dummy->rx_queue == NULL || p_twai_obj_dummy->alert_semphr == NULL) {
ret = ESP_ERR_NO_MEM;
goto err;
}
#ifdef CONFIG_PM_ENABLE
esp_err_t pm_err = esp_pm_lock_create(ESP_PM_APB_FREQ_MAX, 0, "twai", &(p_twai_obj_dummy->pm_lock));
if (pm_err != ESP_OK ) {
ret = pm_err;
goto err;
}
#endif
//Initialize flags and variables. All other members are 0 initialized by calloc()
p_twai_obj_dummy->control_flags = CTRL_FLAG_STOPPED;
p_twai_obj_dummy->mode = g_config->mode;
p_twai_obj_dummy->alerts_enabled = g_config->alerts_enabled;
//Initialize TWAI peripheral registers, and allocate interrupt
TWAI_ENTER_CRITICAL();
if (p_twai_obj == NULL) {
p_twai_obj = p_twai_obj_dummy;
} else {
//Check if driver is already installed
TWAI_EXIT_CRITICAL();
ret = ESP_ERR_INVALID_STATE;
goto err;
}
periph_module_reset(PERIPH_TWAI_MODULE);
periph_module_enable(PERIPH_TWAI_MODULE); //Enable APB CLK to TWAI peripheral
bool init = twai_hal_init(&twai_context);
assert(init);
twai_hal_configure(&twai_context, t_config, f_config, DRIVER_DEFAULT_INTERRUPTS, g_config->clkout_divider);
//Todo: Allow interrupt to be registered to specified CPU
TWAI_EXIT_CRITICAL();
//Allocate GPIO and Interrupts
twai_configure_gpio(g_config->tx_io, g_config->rx_io, g_config->clkout_io, g_config->bus_off_io);
ESP_ERROR_CHECK(esp_intr_alloc(ETS_TWAI_INTR_SOURCE, 0, twai_intr_handler_main, NULL, &p_twai_obj->isr_handle));
#ifdef CONFIG_PM_ENABLE
ESP_ERROR_CHECK(esp_pm_lock_acquire(p_twai_obj->pm_lock)); //Acquire pm_lock to keep APB clock at 80MHz
#endif
return ESP_OK; //TWAI module is still in reset mode, users need to call twai_start() afterwards
err:
//Cleanup TWAI object and return error
if (p_twai_obj_dummy != NULL) {
if (p_twai_obj_dummy->tx_queue != NULL) {
vQueueDelete(p_twai_obj_dummy->tx_queue);
p_twai_obj_dummy->tx_queue = NULL;
}
if (p_twai_obj_dummy->rx_queue != NULL) {
vQueueDelete(p_twai_obj_dummy->rx_queue);
p_twai_obj_dummy->rx_queue = NULL;
}
if (p_twai_obj_dummy->alert_semphr != NULL) {
vSemaphoreDelete(p_twai_obj_dummy->alert_semphr);
p_twai_obj_dummy->alert_semphr = NULL;
}
#ifdef CONFIG_PM_ENABLE
if (p_twai_obj_dummy->pm_lock != NULL) {
ESP_ERROR_CHECK(esp_pm_lock_delete(p_twai_obj_dummy->pm_lock));
}
#endif
free(p_twai_obj_dummy);
}
return ret;
}
esp_err_t twai_driver_uninstall(void)
{
twai_obj_t *p_twai_obj_dummy;
TWAI_ENTER_CRITICAL();
//Check state
TWAI_CHECK_FROM_CRIT(p_twai_obj != NULL, ESP_ERR_INVALID_STATE);
TWAI_CHECK_FROM_CRIT(p_twai_obj->control_flags & (CTRL_FLAG_STOPPED | CTRL_FLAG_BUS_OFF), ESP_ERR_INVALID_STATE);
//Todo: Add check to see if in reset mode. //Enter reset mode to stop any TWAI bus activity
//Clear registers by reading
twai_hal_deinit(&twai_context);
periph_module_disable(PERIPH_TWAI_MODULE); //Disable TWAI peripheral
p_twai_obj_dummy = p_twai_obj; //Use dummy to shorten critical section
p_twai_obj = NULL;
TWAI_EXIT_CRITICAL();
ESP_ERROR_CHECK(esp_intr_free(p_twai_obj_dummy->isr_handle)); //Free interrupt
//Delete queues, semaphores, and power management locks
if (p_twai_obj_dummy->tx_queue != NULL) {
vQueueDelete(p_twai_obj_dummy->tx_queue);
}
vQueueDelete(p_twai_obj_dummy->rx_queue);
vSemaphoreDelete(p_twai_obj_dummy->alert_semphr);
#ifdef CONFIG_PM_ENABLE
//Release and delete power management lock
ESP_ERROR_CHECK(esp_pm_lock_release(p_twai_obj_dummy->pm_lock));
ESP_ERROR_CHECK(esp_pm_lock_delete(p_twai_obj_dummy->pm_lock));
#endif
free(p_twai_obj_dummy); //Free can driver object
return ESP_OK;
}
esp_err_t twai_start(void)
{
//Check state
TWAI_ENTER_CRITICAL();
TWAI_CHECK_FROM_CRIT(p_twai_obj != NULL, ESP_ERR_INVALID_STATE);
TWAI_CHECK_FROM_CRIT(p_twai_obj->control_flags & CTRL_FLAG_STOPPED, ESP_ERR_INVALID_STATE);
//Reset RX queue, and RX message count
xQueueReset(p_twai_obj->rx_queue);
p_twai_obj->rx_msg_count = 0;
//Todo: Add assert to see if in reset mode. //Should already be in bus-off mode, set again to make sure
//Currently in listen only mode, need to set to mode specified by configuration
bool started = twai_hal_start(&twai_context, p_twai_obj->mode);
assert(started);
TWAI_RESET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_STOPPED);
TWAI_EXIT_CRITICAL();
return ESP_OK;
}
esp_err_t twai_stop(void)
{
//Check state
TWAI_ENTER_CRITICAL();
TWAI_CHECK_FROM_CRIT(p_twai_obj != NULL, ESP_ERR_INVALID_STATE);
TWAI_CHECK_FROM_CRIT(!(p_twai_obj->control_flags & (CTRL_FLAG_STOPPED | CTRL_FLAG_BUS_OFF)), ESP_ERR_INVALID_STATE);
bool stopped = twai_hal_stop(&twai_context);
assert(stopped);
TWAI_RESET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_TX_BUFF_OCCUPIED);
TWAI_SET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_STOPPED);
//Reset TX Queue and message count
if (p_twai_obj->tx_queue != NULL) {
xQueueReset(p_twai_obj->tx_queue);
}
p_twai_obj->tx_msg_count = 0;
TWAI_EXIT_CRITICAL();
return ESP_OK;
}
esp_err_t twai_transmit(const twai_message_t *message, TickType_t ticks_to_wait)
{
//Check arguments
TWAI_CHECK(p_twai_obj != NULL, ESP_ERR_INVALID_STATE);
TWAI_CHECK(message != NULL, ESP_ERR_INVALID_ARG);
TWAI_CHECK((message->data_length_code <= TWAI_FRAME_MAX_DLC) || message->dlc_non_comp, ESP_ERR_INVALID_ARG);
TWAI_ENTER_CRITICAL();
//Check State
TWAI_CHECK_FROM_CRIT(!(p_twai_obj->mode == TWAI_MODE_LISTEN_ONLY), ESP_ERR_NOT_SUPPORTED);
TWAI_CHECK_FROM_CRIT(!(p_twai_obj->control_flags & (CTRL_FLAG_STOPPED | CTRL_FLAG_BUS_OFF)), ESP_ERR_INVALID_STATE);
//Format frame
esp_err_t ret = ESP_FAIL;
twai_hal_frame_t tx_frame;
twai_hal_format_frame(message, &tx_frame);
//Check if frame can be sent immediately
if ((p_twai_obj->tx_msg_count == 0) && !(p_twai_obj->control_flags & CTRL_FLAG_TX_BUFF_OCCUPIED)) {
//No other frames waiting to transmit. Bypass queue and transmit immediately
twai_hal_set_tx_buffer_and_transmit(&twai_context, &tx_frame);
p_twai_obj->tx_msg_count++;
TWAI_SET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_TX_BUFF_OCCUPIED);
ret = ESP_OK;
}
TWAI_EXIT_CRITICAL();
if (ret != ESP_OK) {
if (p_twai_obj->tx_queue == NULL) {
//TX Queue is disabled and TX buffer is occupied, message was not sent
ret = ESP_FAIL;
} else if (xQueueSend(p_twai_obj->tx_queue, &tx_frame, ticks_to_wait) == pdTRUE) {
//Copied to TX Queue
TWAI_ENTER_CRITICAL();
if (p_twai_obj->control_flags & (CTRL_FLAG_STOPPED | CTRL_FLAG_BUS_OFF)) {
//TX queue was reset (due to stop/bus_off), remove copied frame from queue to prevent transmission
int res = xQueueReceive(p_twai_obj->tx_queue, &tx_frame, 0);
assert(res == pdTRUE);
ret = ESP_ERR_INVALID_STATE;
} else if ((p_twai_obj->tx_msg_count == 0) && !(p_twai_obj->control_flags & CTRL_FLAG_TX_BUFF_OCCUPIED)) {
//TX buffer was freed during copy, manually trigger transmission
int res = xQueueReceive(p_twai_obj->tx_queue, &tx_frame, 0);
assert(res == pdTRUE);
twai_hal_set_tx_buffer_and_transmit(&twai_context, &tx_frame);
p_twai_obj->tx_msg_count++;
TWAI_SET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_TX_BUFF_OCCUPIED);
ret = ESP_OK;
} else {
//Frame was copied to queue, waiting to be transmitted
p_twai_obj->tx_msg_count++;
ret = ESP_OK;
}
TWAI_EXIT_CRITICAL();
} else {
//Timed out waiting for free space on TX queue
ret = ESP_ERR_TIMEOUT;
}
}
return ret;
}
esp_err_t twai_receive(twai_message_t *message, TickType_t ticks_to_wait)
{
//Check arguments and state
TWAI_CHECK(p_twai_obj != NULL, ESP_ERR_INVALID_STATE);
TWAI_CHECK(message != NULL, ESP_ERR_INVALID_ARG);
//Get frame from RX Queue or RX Buffer
twai_hal_frame_t rx_frame;
if (xQueueReceive(p_twai_obj->rx_queue, &rx_frame, ticks_to_wait) != pdTRUE) {
return ESP_ERR_TIMEOUT;
}
TWAI_ENTER_CRITICAL();
p_twai_obj->rx_msg_count--;
TWAI_EXIT_CRITICAL();
//Decode frame
twai_hal_parse_frame(&rx_frame, message);
return ESP_OK;
}
esp_err_t twai_read_alerts(uint32_t *alerts, TickType_t ticks_to_wait)
{
//Check arguments and state
TWAI_CHECK(p_twai_obj != NULL, ESP_ERR_INVALID_STATE);
TWAI_CHECK(alerts != NULL, ESP_ERR_INVALID_ARG);
//Wait for an alert to occur
if (xSemaphoreTake(p_twai_obj->alert_semphr, ticks_to_wait) == pdTRUE) {
TWAI_ENTER_CRITICAL();
*alerts = p_twai_obj->alerts_triggered;
p_twai_obj->alerts_triggered = 0; //Clear triggered alerts
TWAI_EXIT_CRITICAL();
return ESP_OK;
} else {
*alerts = 0;
return ESP_ERR_TIMEOUT;
}
}
esp_err_t twai_reconfigure_alerts(uint32_t alerts_enabled, uint32_t *current_alerts)
{
TWAI_CHECK(p_twai_obj != NULL, ESP_ERR_INVALID_STATE);
TWAI_ENTER_CRITICAL();
//Clear any unhandled alerts
if (current_alerts != NULL) {
*current_alerts = p_twai_obj->alerts_triggered;;
}
p_twai_obj->alerts_triggered = 0;
p_twai_obj->alerts_enabled = alerts_enabled; //Update enabled alerts
TWAI_EXIT_CRITICAL();
return ESP_OK;
}
esp_err_t twai_initiate_recovery(void)
{
TWAI_ENTER_CRITICAL();
//Check state
TWAI_CHECK_FROM_CRIT(p_twai_obj != NULL, ESP_ERR_INVALID_STATE);
TWAI_CHECK_FROM_CRIT(p_twai_obj->control_flags & CTRL_FLAG_BUS_OFF, ESP_ERR_INVALID_STATE);
TWAI_CHECK_FROM_CRIT(!(p_twai_obj->control_flags & CTRL_FLAG_RECOVERING), ESP_ERR_INVALID_STATE);
//Reset TX Queue/Counters
if (p_twai_obj->tx_queue != NULL) {
xQueueReset(p_twai_obj->tx_queue);
}
p_twai_obj->tx_msg_count = 0;
TWAI_RESET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_TX_BUFF_OCCUPIED);
TWAI_SET_FLAG(p_twai_obj->control_flags, CTRL_FLAG_RECOVERING);
//Trigger start of recovery process
bool started = twai_hal_start_bus_recovery(&twai_context);
assert(started);
TWAI_EXIT_CRITICAL();
return ESP_OK;
}
esp_err_t twai_get_status_info(twai_status_info_t *status_info)
{
//Check parameters and state
TWAI_CHECK(p_twai_obj != NULL, ESP_ERR_INVALID_STATE);
TWAI_CHECK(status_info != NULL, ESP_ERR_INVALID_ARG);
TWAI_ENTER_CRITICAL();
status_info->tx_error_counter = twai_hal_get_tec(&twai_context);
status_info->rx_error_counter = twai_hal_get_rec(&twai_context);
status_info->msgs_to_tx = p_twai_obj->tx_msg_count;
status_info->msgs_to_rx = p_twai_obj->rx_msg_count;
status_info->tx_failed_count = p_twai_obj->tx_failed_count;
status_info->rx_missed_count = p_twai_obj->rx_missed_count;
status_info->arb_lost_count = p_twai_obj->arb_lost_count;
status_info->bus_error_count = p_twai_obj->bus_error_count;
if (p_twai_obj->control_flags & CTRL_FLAG_RECOVERING) {
status_info->state = TWAI_STATE_RECOVERING;
} else if (p_twai_obj->control_flags & CTRL_FLAG_BUS_OFF) {
status_info->state = TWAI_STATE_BUS_OFF;
} else if (p_twai_obj->control_flags & CTRL_FLAG_STOPPED) {
status_info->state = TWAI_STATE_STOPPED;
} else {
status_info->state = TWAI_STATE_RUNNING;
}
TWAI_EXIT_CRITICAL();
return ESP_OK;
}
esp_err_t twai_clear_transmit_queue(void)
{
//Check State
TWAI_CHECK(p_twai_obj != NULL, ESP_ERR_INVALID_STATE);
TWAI_CHECK(p_twai_obj->tx_queue != NULL, ESP_ERR_NOT_SUPPORTED);
TWAI_ENTER_CRITICAL();
//If a message is currently undergoing transmission, the tx interrupt handler will decrement tx_msg_count
p_twai_obj->tx_msg_count = (p_twai_obj->control_flags & CTRL_FLAG_TX_BUFF_OCCUPIED) ? 1 : 0;
xQueueReset(p_twai_obj->tx_queue);
TWAI_EXIT_CRITICAL();
return ESP_OK;
}
esp_err_t twai_clear_receive_queue(void)
{
//Check State
TWAI_CHECK(p_twai_obj != NULL, ESP_ERR_INVALID_STATE);
TWAI_ENTER_CRITICAL();
p_twai_obj->rx_msg_count = 0;
xQueueReset(p_twai_obj->rx_queue);
TWAI_EXIT_CRITICAL();
return ESP_OK;
}
Reference in a new issue View git blame Copy permalink